- PorousFlowDictatorThe UserObject that holds the list of PorousFlow variable names
C++ Type:UserObjectName
Controllable:No
Description:The UserObject that holds the list of PorousFlow variable names
- nThe Corey exponent of the phase.
C++ Type:double
Controllable:No
Description:The Corey exponent of the phase.
- phaseThe phase number
C++ Type:unsigned int
Controllable:No
Description:The phase number
PorousFlowRelativePermeabilityCorey
This Material calculates relative permeability of the fluid phase, using the simple Corey model ((S-S_res)/(1-sum(S_res)))^n
The relative permeability of the phase is where the effective saturation is
Input Parameters
- at_nodesFalseEvaluate Material properties at nodes instead of quadpoints
Default:False
C++ Type:bool
Controllable:No
Description:Evaluate Material properties at nodes instead of quadpoints
- blockThe list of blocks (ids or names) that this object will be applied
C++ Type:std::vector<SubdomainName>
Controllable:No
Description:The list of blocks (ids or names) that this object will be applied
- boundaryThe list of boundaries (ids or names) from the mesh where this object applies
C++ Type:std::vector<BoundaryName>
Controllable:No
Description:The list of boundaries (ids or names) from the mesh where this object applies
- computeTrueWhen false, MOOSE will not call compute methods on this material. The user must call computeProperties() after retrieving the MaterialBase via MaterialBasePropertyInterface::getMaterialBase(). Non-computed MaterialBases are not sorted for dependencies.
Default:True
C++ Type:bool
Controllable:No
Description:When false, MOOSE will not call compute methods on this material. The user must call computeProperties() after retrieving the MaterialBase via MaterialBasePropertyInterface::getMaterialBase(). Non-computed MaterialBases are not sorted for dependencies.
- constant_onNONEWhen ELEMENT, MOOSE will only call computeQpProperties() for the 0th quadrature point, and then copy that value to the other qps.When SUBDOMAIN, MOOSE will only call computeQpProperties() for the 0th quadrature point, and then copy that value to the other qps. Evaluations on element qps will be skipped
Default:NONE
C++ Type:MooseEnum
Options:NONE, ELEMENT, SUBDOMAIN
Controllable:No
Description:When ELEMENT, MOOSE will only call computeQpProperties() for the 0th quadrature point, and then copy that value to the other qps.When SUBDOMAIN, MOOSE will only call computeQpProperties() for the 0th quadrature point, and then copy that value to the other qps. Evaluations on element qps will be skipped
- declare_suffixAn optional suffix parameter that can be appended to any declared properties. The suffix will be prepended with a '_' character.
C++ Type:MaterialPropertyName
Controllable:No
Description:An optional suffix parameter that can be appended to any declared properties. The suffix will be prepended with a '_' character.
- prop_getter_suffixAn optional suffix parameter that can be appended to any attempt to retrieve/get material properties. The suffix will be prepended with a '_' character.
C++ Type:MaterialPropertyName
Controllable:No
Description:An optional suffix parameter that can be appended to any attempt to retrieve/get material properties. The suffix will be prepended with a '_' character.
- s_res0The residual saturation of the phase j. Must be between 0 and 1
Default:0
C++ Type:double
Controllable:No
Description:The residual saturation of the phase j. Must be between 0 and 1
- scaling1Relative permeability is multiplied by this factor
Default:1
C++ Type:double
Controllable:No
Description:Relative permeability is multiplied by this factor
- sum_s_res0Sum of residual saturations over all phases. Must be between 0 and 1
Default:0
C++ Type:double
Controllable:No
Description:Sum of residual saturations over all phases. Must be between 0 and 1
- use_interpolated_stateFalseFor the old and older state use projected material properties interpolated at the quadrature points. To set up projection use the ProjectedStatefulMaterialStorageAction.
Default:False
C++ Type:bool
Controllable:No
Description:For the old and older state use projected material properties interpolated at the quadrature points. To set up projection use the ProjectedStatefulMaterialStorageAction.
Optional Parameters
- control_tagsAdds user-defined labels for accessing object parameters via control logic.
C++ Type:std::vector<std::string>
Controllable:No
Description:Adds user-defined labels for accessing object parameters via control logic.
- enableTrueSet the enabled status of the MooseObject.
Default:True
C++ Type:bool
Controllable:Yes
Description:Set the enabled status of the MooseObject.
- implicitTrueDetermines whether this object is calculated using an implicit or explicit form
Default:True
C++ Type:bool
Controllable:No
Description:Determines whether this object is calculated using an implicit or explicit form
- seed0The seed for the master random number generator
Default:0
C++ Type:unsigned int
Controllable:No
Description:The seed for the master random number generator
- use_displaced_meshFalseWhether or not this object should use the displaced mesh for computation. Note that in the case this is true but no displacements are provided in the Mesh block the undisplaced mesh will still be used.
Default:False
C++ Type:bool
Controllable:No
Description:Whether or not this object should use the displaced mesh for computation. Note that in the case this is true but no displacements are provided in the Mesh block the undisplaced mesh will still be used.
Advanced Parameters
- output_propertiesList of material properties, from this material, to output (outputs must also be defined to an output type)
C++ Type:std::vector<std::string>
Controllable:No
Description:List of material properties, from this material, to output (outputs must also be defined to an output type)
- outputsnone Vector of output names where you would like to restrict the output of variables(s) associated with this object
Default:none
C++ Type:std::vector<OutputName>
Controllable:No
Description:Vector of output names where you would like to restrict the output of variables(s) associated with this object
Outputs Parameters
Input Files
- (modules/porous_flow/test/tests/capillary_pressure/vangenuchten1.i)
- (modules/porous_flow/test/tests/poroperm/PermFromPoro03_fv.i)
- (modules/porous_flow/test/tests/sinks/s04.i)
- (modules/porous_flow/test/tests/poroperm/PermFromPoro02.i)
- (modules/porous_flow/test/tests/fluidstate/brineco2_nonisothermal.i)
- (modules/porous_flow/test/tests/jacobian/basic_advection5.i)
- (modules/porous_flow/test/tests/jacobian/fflux07.i)
- (modules/porous_flow/test/tests/dirackernels/bh_except10.i)
- (modules/porous_flow/test/tests/jacobian/basic_advection4.i)
- (modules/porous_flow/test/tests/jacobian/fflux05.i)
- (modules/porous_flow/test/tests/fluidstate/brineco2_ic.i)
- (modules/porous_flow/test/tests/poroperm/PermFromPoro04.i)
- (modules/porous_flow/test/tests/sinks/s07.i)
- (modules/porous_flow/test/tests/flux_limited_TVD_pflow/jacobian_04.i)
- (modules/porous_flow/examples/coal_mining/fine_with_fluid.i)
- (modules/porous_flow/test/tests/dirackernels/bh_except05.i)
- (modules/porous_flow/test/tests/gravity/grav02b_fv.i)
- (modules/porous_flow/test/tests/sinks/s09.i)
- (modules/porous_flow/test/tests/gravity/grav02a.i)
- (modules/porous_flow/test/tests/poroperm/PermFromPoro01_fv.i)
- (modules/porous_flow/test/tests/jacobian/fflux04.i)
- (modules/porous_flow/test/tests/poroperm/PermTensorFromVar03.i)
- (modules/porous_flow/test/tests/jacobian/line_sink03.i)
- (modules/porous_flow/test/tests/aux_kernels/darcy_velocity_lower_2D.i)
- (modules/porous_flow/test/tests/relperm/corey3.i)
- (modules/porous_flow/test/tests/actions/addmaterials.i)
- (modules/porous_flow/test/tests/gravity/grav02e.i)
- (modules/porous_flow/test/tests/dirackernels/theis3.i)
- (modules/porous_flow/test/tests/relperm/corey2.i)
- (modules/porous_flow/test/tests/jacobian/fflux06.i)
- (modules/porous_flow/test/tests/fluidstate/brineco2.i)
- (modules/porous_flow/test/tests/fluidstate/water_vapor.i)
- (modules/porous_flow/test/tests/pressure_pulse/pressure_pulse_1d_2phasePSVG.i)
- (modules/porous_flow/examples/restart/gas_injection_new_mesh.i)
- (modules/porous_flow/test/tests/dirackernels/bh_except16.i)
- (modules/porous_flow/test/tests/gravity/grav02f.i)
- (modules/porous_flow/test/tests/gravity/grav01a.i)
- (modules/porous_flow/test/tests/poro_elasticity/pp_generation_unconfined_constM.i)
- (modules/porous_flow/test/tests/dirackernels/bh_except03.i)
- (modules/porous_flow/test/tests/dirackernels/bh_except09.i)
- (modules/porous_flow/test/tests/relperm/corey1.i)
- (modules/porous_flow/examples/restart/gas_injection.i)
- (modules/porous_flow/test/tests/capillary_pressure/brooks_corey1.i)
- (modules/porous_flow/test/tests/basic_advection/except2.i)
- (modules/porous_flow/test/tests/heat_advection/heat_advection_1d_KT.i)
- (modules/porous_flow/test/tests/basic_advection/1phase.i)
- (modules/porous_flow/test/tests/sinks/s03.i)
- (modules/porous_flow/test/tests/jacobian/waterncg_twophase.i)
- (modules/porous_flow/test/tests/newton_cooling/nc08.i)
- (modules/porous_flow/test/tests/jacobian/fflux09.i)
- (modules/porous_flow/test/tests/poro_elasticity/mandel.i)
- (modules/porous_flow/examples/thm_example/2D.i)
- (modules/porous_flow/examples/tutorial/11_2D.i)
- (modules/porous_flow/test/tests/fluidstate/theis_tabulated.i)
- (modules/porous_flow/test/tests/jacobian/line_sink01.i)
- (modules/porous_flow/test/tests/basic_advection/2phase.i)
- (modules/porous_flow/examples/tutorial/11.i)
- (modules/porous_flow/test/tests/sinks/s01.i)
- (modules/porous_flow/test/tests/aux_kernels/darcy_velocity_lower_except.i)
- (modules/porous_flow/test/tests/dirackernels/bh_except15.i)
- (modules/porous_flow/test/tests/jacobian/basic_advection3.i)
- (modules/porous_flow/test/tests/gravity/grav01a_fv.i)
- (modules/porous_flow/test/tests/poroperm/PermFromPoro05.i)
- (modules/porous_flow/test/tests/actions/addmaterials2.i)
- (modules/porous_flow/test/tests/aux_kernels/darcy_velocity.i)
- (modules/porous_flow/test/tests/pressure_pulse/pressure_pulse_1d_2phasePS_KT.i)
- (modules/porous_flow/test/tests/dirackernels/hfrompps.i)
- (modules/porous_flow/test/tests/pressure_pulse/pressure_pulse_1d_2phase_monomial.i)
- (modules/porous_flow/test/tests/jacobian/fflux13.i)
- (modules/porous_flow/test/tests/dirackernels/bh_except06.i)
- (modules/porous_flow/test/tests/dirackernels/bh02reporter.i)
- (modules/porous_flow/test/tests/gravity/grav02d.i)
- (modules/porous_flow/test/tests/jacobian/fflux03.i)
- (modules/porous_flow/test/tests/pressure_pulse/pressure_pulse_1d_2phasePS_fv.i)
- (modules/porous_flow/test/tests/capillary_pressure/brooks_corey2.i)
- (modules/porous_flow/test/tests/dirackernels/bh03.i)
- (modules/porous_flow/examples/co2_intercomparison/1Dradial/1Dradial.i)
- (modules/porous_flow/test/tests/dirackernels/bh_except01.i)
- (modules/porous_flow/test/tests/capillary_pressure/vangenuchten2.i)
- (modules/porous_flow/test/tests/jacobian/pls04.i)
- (modules/porous_flow/examples/lava_lamp/1phase_convection.i)
- (modules/porous_flow/test/tests/fluidstate/theis_brineco2_nonisothermal.i)
- (modules/porous_flow/test/tests/jacobian/brineco2_gas.i)
- (modules/porous_flow/test/tests/fluidstate/coldwater_injection.i)
- (modules/porous_flow/test/tests/poroperm/PermFromPoro03.i)
- (modules/porous_flow/test/tests/hysteresis/2phasePS_jac.i)
- (modules/porous_flow/test/tests/poroperm/PermTensorFromVar02.i)
- (modules/porous_flow/test/tests/jacobian/waterncg_liquid.i)
- (modules/porous_flow/test/tests/pressure_pulse/pressure_pulse_1d.i)
- (modules/porous_flow/test/tests/fluidstate/brineco2_2.i)
- (modules/porous_flow/test/tests/dirackernels/bh02.i)
- (modules/porous_flow/test/tests/poroperm/PermTensorFromVar01.i)
- (modules/porous_flow/examples/coal_mining/coarse_with_fluid.i)
- (modules/porous_flow/test/tests/jacobian/hcs01.i)
- (modules/porous_flow/test/tests/heterogeneous_materials/constant_poroperm2.i)
- (modules/porous_flow/test/tests/heterogeneous_materials/constant_poroperm3.i)
- (modules/porous_flow/test/tests/jacobian/heat_advection02.i)
- (modules/porous_flow/test/tests/jacobian/fflux08.i)
- (modules/porous_flow/test/tests/fluidstate/coldwater_injection_radial.i)
- (modules/porous_flow/test/tests/dirackernels/bh_except08.i)
- (modules/porous_flow/test/tests/pressure_pulse/pressure_pulse_1d_steady.i)
- (modules/porous_flow/test/tests/jacobian/pls03.i)
- (modules/porous_flow/test/tests/dirackernels/theis2.i)
- (modules/porous_flow/test/tests/dirackernels/pls02reporter.i)
- (modules/porous_flow/test/tests/sinks/injection_production_eg.i)
- (modules/porous_flow/test/tests/poro_elasticity/mandel_constM.i)
- (modules/porous_flow/test/tests/sinks/injection_production_eg_outflowBC.i)
- (modules/porous_flow/test/tests/flux_limited_TVD_pflow/jacobian_02.i)
- (modules/porous_flow/test/tests/pressure_pulse/pressure_pulse_1d_MD.i)
- (modules/porous_flow/test/tests/hysteresis/2phasePP_jac.i)
- (modules/porous_flow/test/tests/poroperm/PermTensorFromVar01_fv.i)
- (modules/porous_flow/test/tests/newton_cooling/nc02.i)
- (modules/porous_flow/test/tests/gravity/grav01c.i)
- (modules/porous_flow/test/tests/sinks/s08.i)
- (modules/porous_flow/examples/tutorial/10.i)
- (modules/porous_flow/test/tests/pressure_pulse/pressure_pulse_1d_3comp.i)
- (modules/porous_flow/test/tests/jacobian/basic_advection6.i)
- (modules/porous_flow/test/tests/newton_cooling/nc06.i)
- (modules/porous_flow/test/tests/jacobian/basic_advection2.i)
- (modules/porous_flow/test/tests/heat_advection/heat_advection_1d_fv.i)
- (modules/porous_flow/test/tests/pressure_pulse/pressure_pulse_1d_adaptivity.i)
- (modules/porous_flow/test/tests/dirackernels/theis1.i)
- (modules/porous_flow/test/tests/jacobian/basic_advection1.i)
- (modules/porous_flow/test/tests/heat_advection/heat_advection_1d.i)
- (modules/porous_flow/test/tests/gravity/grav02b.i)
- (modules/porous_flow/test/tests/jacobian/heat_advection01.i)
- (modules/porous_flow/test/tests/pressure_pulse/pressure_pulse_1d_2phasePS.i)
- (modules/porous_flow/test/tests/basic_advection/except1.i)
- (modules/porous_flow/test/tests/flux_limited_TVD_pflow/jacobian_05.i)
- (modules/porous_flow/test/tests/fluidstate/waterncg.i)
- (modules/porous_flow/examples/lava_lamp/2phase_convection.i)
- (modules/porous_flow/test/tests/jacobian/pls02.i)
- (modules/porous_flow/test/tests/jacobian/fflux01.i)
- (modules/porous_flow/test/tests/sinks/s05.i)
- (modules/porous_flow/test/tests/gravity/grav02e_fv.i)
- (modules/porous_flow/test/tests/buckley_leverett/bl01.i)
- (modules/porous_flow/test/tests/flux_limited_TVD_pflow/jacobian_03.i)
- (modules/porous_flow/test/tests/poro_elasticity/pp_generation_unconfined.i)
- (modules/porous_flow/test/tests/jacobian/brineco2_liquid.i)
- (modules/porous_flow/test/tests/pressure_pulse/pressure_pulse_1d_fully_saturated.i)
- (modules/porous_flow/test/tests/jacobian/brineco2_liquid_2.i)
- (modules/porous_flow/examples/thm_example/2D_c.i)
- (modules/porous_flow/test/tests/newton_cooling/nc01.i)
- (modules/porous_flow/test/tests/dirackernels/bh_except14.i)
- (modules/porous_flow/test/tests/jacobian/waterncg_twophase_nonisothermal.i)
- (modules/porous_flow/test/tests/dirackernels/bh_except02.i)
- (modules/porous_flow/test/tests/aux_kernels/properties.i)
- (modules/porous_flow/test/tests/poro_elasticity/terzaghi.i)
- (modules/porous_flow/test/tests/dirackernels/bh_except04.i)
- (modules/porous_flow/test/tests/fluidstate/brineco2_fv.i)
- (modules/porous_flow/test/tests/fluidstate/waterncg_nonisothermal.i)
- (modules/porous_flow/test/tests/heat_advection/heat_advection_1d_fullsat.i)
- (modules/porous_flow/test/tests/infiltration_and_drainage/rsc02.i)
- (modules/porous_flow/test/tests/pressure_pulse/pressure_pulse_1d_2phase.i)
- (modules/porous_flow/test/tests/sinks/s09_fully_saturated.i)
- (modules/porous_flow/test/tests/gravity/grav01d.i)
- (modules/porous_flow/test/tests/dirackernels/pls02.i)
- (modules/porous_flow/test/tests/jacobian/waterncg_gas.i)
- (modules/porous_flow/test/tests/heterogeneous_materials/constant_poroperm.i)
- (modules/porous_flow/test/tests/recover/theis.i)
- (modules/porous_flow/test/tests/fluidstate/theis_brineco2.i)
- (modules/porous_flow/test/tests/jacobian/line_sink04.i)
- (modules/porous_flow/test/tests/aux_kernels/darcy_velocity_lower.i)
- (modules/porous_flow/test/tests/sinks/s06.i)
- (modules/porous_flow/test/tests/jacobian/line_sink02.i)
- (modules/porous_flow/test/tests/poroperm/PermFromPoro01.i)
- (modules/porous_flow/test/tests/fluidstate/brineco2_hightemp.i)
- (modules/porous_flow/test/tests/jacobian/brineco2_twophase_nonisothermal.i)
- (modules/porous_flow/test/tests/jacobian/hgs01.i)
- (modules/porous_flow/test/tests/jacobian/outflowbc04.i)
- (modules/porous_flow/test/tests/gravity/grav01b.i)
- (modules/porous_flow/test/tests/jacobian/pls01.i)
- (modules/porous_flow/test/tests/jacobian/fflux02.i)
- (modules/porous_flow/test/tests/poro_elasticity/terzaghi_constM.i)
- (modules/porous_flow/test/tests/poro_elasticity/pp_generation.i)
- (modules/porous_flow/test/tests/jacobian/brineco2_twophase.i)
- (modules/porous_flow/test/tests/fluidstate/theis_nonisothermal.i)
- (modules/porous_flow/test/tests/heterogeneous_materials/constant_poroperm_fv.i)
- (modules/porous_flow/test/tests/gravity/grav02c.i)
- (modules/porous_flow/test/tests/capillary_pressure/vangenuchten3.i)
- (modules/porous_flow/test/tests/fluidstate/waterncg_ic.i)
- (modules/porous_flow/test/tests/relperm/corey4.i)
- (modules/porous_flow/test/tests/pressure_pulse/pressure_pulse_1d_2phase_fv.i)
- (modules/porous_flow/test/tests/fluidstate/theis.i)
- (modules/porous_flow/test/tests/sinks/s02.i)
- (modules/porous_flow/test/tests/fluidstate/water_vapor_phasechange.i)
- (modules/porous_flow/test/tests/pressure_pulse/pressure_pulse_1d_2phasePSVG2.i)
- (modules/porous_flow/test/tests/infiltration_and_drainage/rsc01.i)
(modules/porous_flow/test/tests/capillary_pressure/vangenuchten1.i)
# Test van Genuchten relative permeability curve by varying saturation over the mesh
# van Genuchten exponent m = 0.5 for both phases
# No residual saturation in either phase
[Mesh]
type = GeneratedMesh
dim = 1
nx = 500
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[p0]
initial_condition = 1e6
[]
[s1]
[]
[]
[AuxVariables]
[s0aux]
family = MONOMIAL
order = CONSTANT
[]
[s1aux]
family = MONOMIAL
order = CONSTANT
[]
[p0aux]
family = MONOMIAL
order = CONSTANT
[]
[p1aux]
family = MONOMIAL
order = CONSTANT
[]
[]
[AuxKernels]
[s0]
type = PorousFlowPropertyAux
property = saturation
phase = 0
variable = s0aux
[]
[s1]
type = PorousFlowPropertyAux
property = saturation
phase = 1
variable = s1aux
[]
[p0]
type = PorousFlowPropertyAux
property = pressure
phase = 0
variable = p0aux
[]
[p1]
type = PorousFlowPropertyAux
property = pressure
phase = 1
variable = p1aux
[]
[]
[Functions]
[s1]
type = ParsedFunction
expression = x
[]
[]
[ICs]
[s1]
type = FunctionIC
variable = s1
function = s1
[]
[]
[Kernels]
[p0]
type = Diffusion
variable = p0
[]
[s1]
type = Diffusion
variable = s1
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'p0 s1'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
alpha = 1e-5
m = 0.5
sat_lr = 0.1
log_extension = false
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePS
phase0_porepressure = p0
phase1_saturation = s1
capillary_pressure = pc
[]
[kr0]
type = PorousFlowRelativePermeabilityVG
phase = 0
m = 0.5
[]
[kr1]
type = PorousFlowRelativePermeabilityCorey
phase = 1
n = 2
[]
[]
[VectorPostprocessors]
[vpp]
type = LineValueSampler
variable = 's0aux s1aux p0aux p1aux'
start_point = '0 0 0'
end_point = '1 0 0'
num_points = 500
sort_by = id
[]
[]
[Executioner]
type = Steady
solve_type = NEWTON
nl_abs_tol = 1e-6
[]
[BCs]
[sleft]
type = DirichletBC
variable = s1
value = 0
boundary = left
[]
[sright]
type = DirichletBC
variable = s1
value = 1
boundary = right
[]
[]
[Outputs]
csv = true
execute_on = timestep_end
[]
(modules/porous_flow/test/tests/poroperm/PermFromPoro03_fv.i)
# Testing permeability from porosity
# Trivial test, checking calculated permeability is correct
# k = k_anisotropic * B * exp(A * phi)
[Mesh]
[mesh]
type = GeneratedMeshGenerator
dim = 1
nx = 3
xmin = 0
xmax = 3
[]
[]
[GlobalParams]
block = 0
PorousFlowDictator = dictator
[]
[Variables]
[pp]
type = MooseVariableFVReal
[FVInitialCondition]
type = FVConstantIC
value = 0
[]
[]
[]
[FVKernels]
[flux]
type = FVPorousFlowAdvectiveFlux
gravity = '0 0 0'
variable = pp
[]
[]
[FVBCs]
[ptop]
type = FVDirichletBC
variable = pp
boundary = right
value = 0
[]
[pbase]
type = FVDirichletBC
variable = pp
boundary = left
value = 1
[]
[]
[AuxVariables]
[poro]
type = MooseVariableFVReal
[]
[perm_x]
type = MooseVariableFVReal
[]
[perm_y]
type = MooseVariableFVReal
[]
[perm_z]
type = MooseVariableFVReal
[]
[]
[AuxKernels]
[poro]
type = ADPorousFlowPropertyAux
property = porosity
variable = poro
[]
[perm_x]
type = ADPorousFlowPropertyAux
property = permeability
variable = perm_x
row = 0
column = 0
[]
[perm_y]
type = ADPorousFlowPropertyAux
property = permeability
variable = perm_y
row = 1
column = 1
[]
[perm_z]
type = ADPorousFlowPropertyAux
property = permeability
variable = perm_z
row = 2
column = 2
[]
[]
[Postprocessors]
[perm_x_bottom]
type = PointValue
variable = perm_x
point = '0 0 0'
[]
[perm_y_bottom]
type = PointValue
variable = perm_y
point = '0 0 0'
[]
[perm_z_bottom]
type = PointValue
variable = perm_z
point = '0 0 0'
[]
[perm_x_top]
type = PointValue
variable = perm_x
point = '3 0 0'
[]
[perm_y_top]
type = PointValue
variable = perm_y
point = '3 0 0'
[]
[perm_z_top]
type = PointValue
variable = perm_z
point = '3 0 0'
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
# unimportant in this fully-saturated test
m = 0.8
alpha = 1e-4
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2.2e9
viscosity = 1e-3
density0 = 1000
thermal_expansion = 0
[]
[]
[Materials]
[permeability]
type = ADPorousFlowPermeabilityExponential
k_anisotropy = '1 0 0 0 2 0 0 0 0.1'
poroperm_function = exp_k
A = 10
B = 1e-8
[]
[temperature]
type = ADPorousFlowTemperature
[]
[massfrac]
type = ADPorousFlowMassFraction
[]
[eff_fluid_pressure]
type = ADPorousFlowEffectiveFluidPressure
[]
[ppss]
type = ADPorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[simple_fluid]
type = ADPorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = ADPorousFlowPorosityConst
porosity = 0.1
[]
[relperm]
type = ADPorousFlowRelativePermeabilityCorey
n = 0 # unimportant in this fully-saturated situation
phase = 0
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Steady
solve_type = Newton
l_tol = 1E-5
nl_abs_tol = 1E-3
nl_rel_tol = 1E-8
l_max_its = 200
nl_max_its = 400
[]
[Outputs]
file_base = 'PermFromPoro03_out'
csv = true
execute_on = 'timestep_end'
[]
(modules/porous_flow/test/tests/sinks/s04.i)
# apply a piecewise-linear sink flux and observe the correct behavior
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 1
xmin = 0
xmax = 1
ymin = 0
ymax = 1
zmin = 0
zmax = 2
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[Variables]
[pp]
[]
[]
[ICs]
[pp]
type = FunctionIC
variable = pp
function = y+1
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1.3
density0 = 1.1
thermal_expansion = 0
viscosity = 1.1
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-5 0 0 0 1E-5 0 0 0 1E-5'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[]
[AuxVariables]
[flux_out]
[]
[xval]
[]
[yval]
[]
[pt_shift]
initial_condition = 0.3
[]
[]
[ICs]
[xval]
type = FunctionIC
variable = xval
function = x
[]
[yval]
type = FunctionIC
variable = yval
function = y
[]
[]
[Functions]
[mass10]
type = ParsedFunction
expression = 'vol*por*dens0*exp(pp/bulk)'
symbol_names = 'vol por dens0 pp bulk'
symbol_values = '0.25 0.1 1.1 p10 1.3'
[]
[rate10]
type = ParsedFunction
expression = 'fcn*if(pp>0.8,1,if(pp<0.3,0.5,0.2+pp))'
symbol_names = 'fcn pp'
symbol_values = '8 p10'
[]
[mass10_expect]
type = ParsedFunction
expression = 'mass_prev-rate*area*dt'
symbol_names = 'mass_prev rate area dt'
symbol_values = 'm10_prev m10_rate 0.5 1E-3'
[]
[mass11]
type = ParsedFunction
expression = 'vol*por*dens0*exp(pp/bulk)'
symbol_names = 'vol por dens0 pp bulk'
symbol_values = '0.25 0.1 1.1 p11 1.3'
[]
[rate11]
type = ParsedFunction
expression = 'fcn*if(pp>0.8,1,if(pp<0.3,0.5,0.2+pp))'
symbol_names = 'fcn pp'
symbol_values = '8 p11'
[]
[mass11_expect]
type = ParsedFunction
expression = 'mass_prev-rate*area*dt'
symbol_names = 'mass_prev rate area dt'
symbol_values = 'm11_prev m11_rate 0.5 1E-3'
[]
[]
[Postprocessors]
[p00]
type = PointValue
point = '0 0 0'
variable = pp
execute_on = 'initial timestep_end'
[]
[p10]
type = PointValue
point = '1 0 0'
variable = pp
execute_on = 'initial timestep_end'
[]
[m10]
type = FunctionValuePostprocessor
function = mass10
execute_on = 'initial timestep_end'
[]
[m10_prev]
type = FunctionValuePostprocessor
function = mass10
execute_on = 'timestep_begin'
outputs = 'console'
[]
[m10_rate]
type = FunctionValuePostprocessor
function = rate10
execute_on = 'timestep_end'
[]
[m10_expect]
type = FunctionValuePostprocessor
function = mass10_expect
execute_on = 'timestep_end'
[]
[p01]
type = PointValue
point = '0 1 0'
variable = pp
execute_on = 'initial timestep_end'
[]
[p11]
type = PointValue
point = '1 1 0'
variable = pp
execute_on = 'initial timestep_end'
[]
[m11]
type = FunctionValuePostprocessor
function = mass11
execute_on = 'initial timestep_end'
[]
[m11_prev]
type = FunctionValuePostprocessor
function = mass11
execute_on = 'timestep_begin'
outputs = 'console'
[]
[m11_rate]
type = FunctionValuePostprocessor
function = rate11
execute_on = 'timestep_end'
[]
[m11_expect]
type = FunctionValuePostprocessor
function = mass11_expect
execute_on = 'timestep_end'
[]
[]
[BCs]
[flux]
type = PorousFlowPiecewiseLinearSink
boundary = 'right'
PT_shift = pt_shift
pt_vals = '0.0 0.5'
multipliers = '0.5 1'
variable = pp
use_mobility = false
use_relperm = false
fluid_phase = 0
flux_function = 8
save_in = flux_out
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -sub_pc_type -snes_max_it -sub_pc_factor_shift_type -pc_asm_overlap'
petsc_options_value = 'gmres asm lu 10000 NONZERO 2'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1E-3
end_time = 1E-2
nl_rel_tol = 1E-12
nl_abs_tol = 1E-12
[]
[Outputs]
file_base = s04
[console]
type = Console
execute_on = 'nonlinear linear'
[]
[csv]
type = CSV
execute_on = 'timestep_end'
[]
[]
(modules/porous_flow/test/tests/poroperm/PermFromPoro02.i)
# Testing permeability from porosity
# Trivial test, checking calculated permeability is correct
# k = k_anisotropic * k0 * (1-phi0)^m/phi0^n * phi^n/(1-phi)^m
[Mesh]
type = GeneratedMesh
dim = 1
nx = 3
xmin = 0
xmax = 3
[]
[GlobalParams]
block = 0
PorousFlowDictator = dictator
[]
[Variables]
[pp]
[InitialCondition]
type = ConstantIC
value = 0
[]
[]
[]
[Kernels]
[flux]
type = PorousFlowAdvectiveFlux
gravity = '0 0 0'
variable = pp
[]
[]
[BCs]
[ptop]
type = DirichletBC
variable = pp
boundary = right
value = 0
[]
[pbase]
type = DirichletBC
variable = pp
boundary = left
value = 1
[]
[]
[AuxVariables]
[poro]
order = CONSTANT
family = MONOMIAL
[]
[perm_x]
order = CONSTANT
family = MONOMIAL
[]
[perm_y]
order = CONSTANT
family = MONOMIAL
[]
[perm_z]
order = CONSTANT
family = MONOMIAL
[]
[]
[AuxKernels]
[poro]
type = PorousFlowPropertyAux
property = porosity
variable = poro
[]
[perm_x]
type = PorousFlowPropertyAux
property = permeability
variable = perm_x
row = 0
column = 0
[]
[perm_y]
type = PorousFlowPropertyAux
property = permeability
variable = perm_y
row = 1
column = 1
[]
[perm_z]
type = PorousFlowPropertyAux
property = permeability
variable = perm_z
row = 2
column = 2
[]
[]
[Postprocessors]
[perm_x_bottom]
type = PointValue
variable = perm_x
point = '0 0 0'
[]
[perm_y_bottom]
type = PointValue
variable = perm_y
point = '0 0 0'
[]
[perm_z_bottom]
type = PointValue
variable = perm_z
point = '0 0 0'
[]
[perm_x_top]
type = PointValue
variable = perm_x
point = '3 0 0'
[]
[perm_y_top]
type = PointValue
variable = perm_y
point = '3 0 0'
[]
[perm_z_top]
type = PointValue
variable = perm_z
point = '3 0 0'
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
# unimportant in this fully-saturated test
m = 0.8
alpha = 1e-4
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2.2e9
viscosity = 1e-3
density0 = 1000
thermal_expansion = 0
[]
[]
[Materials]
[permeability]
type = PorousFlowPermeabilityKozenyCarman
k_anisotropy = '1 0 0 0 2 0 0 0 0.1'
poroperm_function = kozeny_carman_phi0
k0 = 1e-10
phi0 = 0.05
m = 2
n = 7
[]
[temperature]
type = PorousFlowTemperature
[]
[massfrac]
type = PorousFlowMassFraction
[]
[eff_fluid_pressure]
type = PorousFlowEffectiveFluidPressure
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosity
porosity_zero = 0.1
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 0 # unimportant in this fully-saturated situation
phase = 0
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
[]
[]
[Executioner]
solve_type = Newton
type = Steady
l_tol = 1E-5
nl_abs_tol = 1E-3
nl_rel_tol = 1E-8
l_max_its = 200
nl_max_its = 400
petsc_options_iname = '-pc_type -pc_asm_overlap -sub_pc_type -ksp_type -ksp_gmres_restart'
petsc_options_value = ' asm 2 lu gmres 200'
[]
[Outputs]
csv = true
execute_on = 'timestep_end'
[]
(modules/porous_flow/test/tests/fluidstate/brineco2_nonisothermal.i)
[Mesh]
[mesh]
type = GeneratedMeshGenerator
dim = 2
[]
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pgas]
initial_condition = 20e6
[]
[z]
initial_condition = 0.2
[]
[temperature]
initial_condition = 70
[]
[]
[AuxVariables]
[xnacl]
initial_condition = 0.1
[]
[pressure_gas]
order = CONSTANT
family = MONOMIAL
[]
[pressure_water]
order = CONSTANT
family = MONOMIAL
[]
[saturation_gas]
order = CONSTANT
family = MONOMIAL
[]
[saturation_water]
order = CONSTANT
family = MONOMIAL
[]
[density_water]
order = CONSTANT
family = MONOMIAL
[]
[density_gas]
order = CONSTANT
family = MONOMIAL
[]
[viscosity_water]
order = CONSTANT
family = MONOMIAL
[]
[viscosity_gas]
order = CONSTANT
family = MONOMIAL
[]
[enthalpy_water]
order = CONSTANT
family = MONOMIAL
[]
[enthalpy_gas]
order = CONSTANT
family = MONOMIAL
[]
[internal_energy_water]
order = CONSTANT
family = MONOMIAL
[]
[internal_energy_gas]
order = CONSTANT
family = MONOMIAL
[]
[x0_water]
order = CONSTANT
family = MONOMIAL
[]
[x0_gas]
order = CONSTANT
family = MONOMIAL
[]
[x1_water]
order = CONSTANT
family = MONOMIAL
[]
[x1_gas]
order = CONSTANT
family = MONOMIAL
[]
[]
[AuxKernels]
[pressure_water]
type = PorousFlowPropertyAux
variable = pressure_water
property = pressure
phase = 0
execute_on = timestep_end
[]
[pressure_gas]
type = PorousFlowPropertyAux
variable = pressure_gas
property = pressure
phase = 1
execute_on = timestep_end
[]
[saturation_water]
type = PorousFlowPropertyAux
variable = saturation_water
property = saturation
phase = 0
execute_on = timestep_end
[]
[saturation_gas]
type = PorousFlowPropertyAux
variable = saturation_gas
property = saturation
phase = 1
execute_on = timestep_end
[]
[density_water]
type = PorousFlowPropertyAux
variable = density_water
property = density
phase = 0
execute_on = timestep_end
[]
[density_gas]
type = PorousFlowPropertyAux
variable = density_gas
property = density
phase = 1
execute_on = timestep_end
[]
[viscosity_water]
type = PorousFlowPropertyAux
variable = viscosity_water
property = viscosity
phase = 0
execute_on = timestep_end
[]
[viscosity_gas]
type = PorousFlowPropertyAux
variable = viscosity_gas
property = viscosity
phase = 1
execute_on = timestep_end
[]
[enthalpy_water]
type = PorousFlowPropertyAux
variable = enthalpy_water
property = enthalpy
phase = 0
execute_on = timestep_end
[]
[enthalpy_gas]
type = PorousFlowPropertyAux
variable = enthalpy_gas
property = enthalpy
phase = 1
execute_on = timestep_end
[]
[internal_energy_water]
type = PorousFlowPropertyAux
variable = internal_energy_water
property = internal_energy
phase = 0
execute_on = timestep_end
[]
[internal_energy_gas]
type = PorousFlowPropertyAux
variable = internal_energy_gas
property = internal_energy
phase = 1
execute_on = timestep_end
[]
[x1_water]
type = PorousFlowPropertyAux
variable = x1_water
property = mass_fraction
phase = 0
fluid_component = 1
execute_on = timestep_end
[]
[x1_gas]
type = PorousFlowPropertyAux
variable = x1_gas
property = mass_fraction
phase = 1
fluid_component = 1
execute_on = timestep_end
[]
[x0_water]
type = PorousFlowPropertyAux
variable = x0_water
property = mass_fraction
phase = 0
fluid_component = 0
execute_on = timestep_end
[]
[x0_gas]
type = PorousFlowPropertyAux
variable = x0_gas
property = mass_fraction
phase = 1
fluid_component = 0
execute_on = timestep_end
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
variable = pgas
fluid_component = 0
[]
[mass1]
type = PorousFlowMassTimeDerivative
variable = z
fluid_component = 1
[]
[heat]
type = TimeDerivative
variable = temperature
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pgas z temperature'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureConst
pc = 0
[]
[fs]
type = PorousFlowBrineCO2
brine_fp = brine
co2_fp = co2
capillary_pressure = pc
[]
[]
[FluidProperties]
[co2]
type = CO2FluidProperties
[]
[brine]
type = BrineFluidProperties
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[brineco2]
type = PorousFlowFluidState
gas_porepressure = pgas
z = z
temperature = temperature
temperature_unit = Celsius
xnacl = xnacl
capillary_pressure = pc
fluid_state = fs
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-12 0 0 0 1e-12 0 0 0 1e-12'
[]
[relperm0]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[relperm1]
type = PorousFlowRelativePermeabilityCorey
n = 3
phase = 1
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[]
[Executioner]
type = Transient
solve_type = NEWTON
dt = 1
end_time = 1
nl_abs_tol = 1e-12
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Postprocessors]
[density_water]
type = ElementIntegralVariablePostprocessor
variable = density_water
[]
[density_gas]
type = ElementIntegralVariablePostprocessor
variable = density_gas
[]
[viscosity_water]
type = ElementIntegralVariablePostprocessor
variable = viscosity_water
[]
[viscosity_gas]
type = ElementIntegralVariablePostprocessor
variable = viscosity_gas
[]
[enthalpy_water]
type = ElementIntegralVariablePostprocessor
variable = enthalpy_water
[]
[enthalpy_gas]
type = ElementIntegralVariablePostprocessor
variable = enthalpy_gas
[]
[internal_energy_water]
type = ElementIntegralVariablePostprocessor
variable = internal_energy_water
[]
[internal_energy_gas]
type = ElementIntegralVariablePostprocessor
variable = internal_energy_gas
[]
[x1_water]
type = ElementIntegralVariablePostprocessor
variable = x1_water
[]
[x0_water]
type = ElementIntegralVariablePostprocessor
variable = x0_water
[]
[x1_gas]
type = ElementIntegralVariablePostprocessor
variable = x1_gas
[]
[x0_gas]
type = ElementIntegralVariablePostprocessor
variable = x0_gas
[]
[sg]
type = ElementIntegralVariablePostprocessor
variable = saturation_gas
[]
[sw]
type = ElementIntegralVariablePostprocessor
variable = saturation_water
[]
[pwater]
type = ElementIntegralVariablePostprocessor
variable = pressure_water
[]
[pgas]
type = ElementIntegralVariablePostprocessor
variable = pressure_gas
[]
[x0mass]
type = PorousFlowFluidMass
fluid_component = 0
phase = '0 1'
[]
[x1mass]
type = PorousFlowFluidMass
fluid_component = 1
phase = '0 1'
[]
[]
[Outputs]
csv = true
execute_on = timestep_end
[]
(modules/porous_flow/test/tests/jacobian/basic_advection5.i)
# Basic advection with 1 porepressure as a PorousFlow variable
[Mesh]
type = GeneratedMesh
dim = 1
nx = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[u]
[]
[P]
[]
[]
[ICs]
[P]
type = RandomIC
variable = P
min = -1
max = 1
[]
[u]
type = RandomIC
variable = u
[]
[]
[Kernels]
[dummy_P]
type = NullKernel
variable = P
[]
[u_advection]
type = PorousFlowBasicAdvection
variable = u
phase = 0
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = P
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
alpha = 1
m = 0.6
sat_lr = 0.1
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 3
density0 = 4
thermal_expansion = 0
viscosity = 150.0
[]
[]
[Materials]
[temperature_qp]
type = PorousFlowTemperature
[]
[ppss_qp]
type = PorousFlow1PhaseP
porepressure = P
capillary_pressure = pc
[]
[simple_fluid_qp]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[effective_fluid_pressure]
type = PorousFlowEffectiveFluidPressure
[]
[porosity]
type = PorousFlowPorosity
porosity_zero = 0.1
fluid = true
biot_coefficient = 0.5
solid_bulk = 1
[]
[permeability]
type = PorousFlowPermeabilityKozenyCarman
poroperm_function = kozeny_carman_phi0
k0 = 5
m = 2
n = 2
phi0 = 0.1
[]
[relperm_qp]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[darcy_velocity_qp]
type = PorousFlowDarcyVelocityMaterial
gravity = '0.25 0 0'
[]
[]
[Preconditioning]
[check]
type = SMP
full = true
#petsc_options = '-snes_test_display'
petsc_options_iname = '-snes_type'
petsc_options_value = ' test'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
end_time = 1
[]
(modules/porous_flow/test/tests/jacobian/fflux07.i)
# 2phase (PS), 2components (that exist in both phases), constant viscosity, constant insitu permeability
# density with constant bulk, Corey relative perm, nonzero gravity, vanGenuchten capillary pressure
[Mesh]
type = GeneratedMesh
dim = 2
nx = 2
xmin = 0
xmax = 1
ny = 1
ymin = 0
ymax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[ppwater]
[]
[sgas]
[]
[]
[AuxVariables]
[massfrac_ph0_sp0]
[]
[massfrac_ph1_sp0]
[]
[]
[ICs]
[ppwater]
type = RandomIC
variable = ppwater
min = 0
max = 1
[]
[ppgas]
type = RandomIC
variable = sgas
min = 0
max = 1
[]
[massfrac_ph0_sp0]
type = RandomIC
variable = massfrac_ph0_sp0
min = 0
max = 1
[]
[massfrac_ph1_sp0]
type = RandomIC
variable = massfrac_ph1_sp0
min = 0
max = 1
[]
[]
[Kernels]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = ppwater
gravity = '-1 -0.1 0'
[]
[flux1]
type = PorousFlowAdvectiveFlux
fluid_component = 1
variable = sgas
gravity = '-1 -0.1 0'
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'ppwater sgas'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
pc_max = 10
sat_lr = 0.1
[]
[]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 1.5
density0 = 1
thermal_expansion = 0
viscosity = 1
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 0.5
density0 = 0.5
thermal_expansion = 0
viscosity = 1
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePS
phase0_porepressure = ppwater
phase1_saturation = sgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph1_sp0'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 2 0 0 0 3'
[]
[relperm0]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
s_res = 0.1
sum_s_res = 0.1
[]
[relperm1]
type = PorousFlowRelativePermeabilityCorey
n = 3
phase = 1
s_res = 0.0
sum_s_res = 0.1
[]
[]
[Preconditioning]
active = check
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000'
[]
[check]
type = SMP
full = true
petsc_options_iname = '-snes_type'
petsc_options_value = 'test'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
[Outputs]
exodus = false
[]
(modules/porous_flow/test/tests/dirackernels/bh_except10.i)
# PorousFlowPeacemanBorehole exception test
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 1
xmin = -1
xmax = 1
ymin = -1
ymax = 1
zmin = -1
zmax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
initial_condition = 1E7
[]
[]
[Kernels]
[mass0]
type = TimeDerivative
variable = pp
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[borehole_total_outflow_mass]
type = PorousFlowSumQuantity
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1e-7
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e9
viscosity = 1e-3
density0 = 1000
thermal_expansion = 0
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
compute_internal_energy = false
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[]
[DiracKernels]
[bh]
type = PorousFlowPeacemanBorehole
bottom_p_or_t = 0
fluid_phase = 0
point_file = bh02.bh
use_mobility = true
use_internal_energy = true
SumQuantityUO = borehole_total_outflow_mass
variable = pp
unit_weight = '0 0 0'
character = 1
[]
[]
[Postprocessors]
[bh_report]
type = PorousFlowPlotQuantity
uo = borehole_total_outflow_mass
[]
[fluid_mass0]
type = PorousFlowFluidMass
execute_on = timestep_begin
[]
[fluid_mass1]
type = PorousFlowFluidMass
execute_on = timestep_end
[]
[zmass_error]
type = FunctionValuePostprocessor
function = mass_bal_fcn
execute_on = timestep_end
[]
[p0]
type = PointValue
variable = pp
point = '0 0 0'
execute_on = timestep_end
[]
[]
[Functions]
[mass_bal_fcn]
type = ParsedFunction
expression = abs((a-c+d)/2/(a+c))
symbol_names = 'a c d'
symbol_values = 'fluid_mass1 fluid_mass0 bh_report'
[]
[]
[Preconditioning]
[usual]
type = SMP
full = true
petsc_options = '-snes_converged_reason'
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -ksp_max_it'
petsc_options_value = 'bcgs bjacobi 1E-10 1E-10 10000 30'
[]
[]
[Executioner]
type = Transient
end_time = 0.5
dt = 1E-2
solve_type = NEWTON
[]
(modules/porous_flow/test/tests/jacobian/basic_advection4.i)
# Basic advection with 1 porepressure and temperature as PorousFlow variables
# Constant permeability
[Mesh]
type = GeneratedMesh
dim = 1
nx = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[u]
[]
[T]
[]
[P]
[]
[]
[ICs]
[P]
type = RandomIC
variable = P
min = 2E5
max = 4E5
[]
[T]
type = RandomIC
variable = T
min = 300
max = 900
[]
[u]
type = RandomIC
variable = u
[]
[]
[Kernels]
[dummy_T]
type = NullKernel
variable = T
[]
[dummy_P]
type = NullKernel
variable = P
[]
[u_advection]
type = PorousFlowBasicAdvection
variable = u
phase = 0
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'P T'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
alpha = 1E-5
m = 0.6
sat_lr = 0.1
[]
[]
[FluidProperties]
[methane]
type = MethaneFluidProperties
[]
[]
[Materials]
[temperature_qp]
type = PorousFlowTemperature
temperature = T
[]
[ppss_qp]
type = PorousFlow1PhaseP
porepressure = P
capillary_pressure = pc
[]
[fluid_qp]
type = PorousFlowSingleComponentFluid
fp = methane
phase = 0
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '5 0 0 0 5 0 0 0 5'
[]
[relperm_qp]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
s_res = 0.1
sum_s_res = 0.1
[]
[darcy_velocity_qp]
type = PorousFlowDarcyVelocityMaterial
gravity = '0.25 0 0'
[]
[]
[Preconditioning]
[check]
type = SMP
full = true
#petsc_options = '-snes_test_display'
petsc_options_iname = '-snes_type'
petsc_options_value = ' test'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
end_time = 1
[]
(modules/porous_flow/test/tests/jacobian/fflux05.i)
# 1phase with MD_Gaussian (var = log(mass-density) with Gaussian capillary) formulation
# constant viscosity, constant insitu permeability
# density with constant bulk, Corey relative perm, nonzero gravity
# fully saturated
[Mesh]
type = GeneratedMesh
dim = 2
nx = 2
xmin = 0
xmax = 1
ny = 1
ymin = 0
ymax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[md]
[]
[]
[ICs]
[md]
type = RandomIC
min = 0
max = 1 # unsaturated for md<log(density_P0=0.8)=-0.223
variable = md
[]
[]
[Kernels]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = md
gravity = '-1 -0.1 0'
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'md'
number_fluid_phases = 1
number_fluid_components = 1
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1.5
density0 = 1
thermal_expansion = 0
viscosity = 1
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseMD_Gaussian
mass_density = md
al = 1.1
density_P0 = 0.8
bulk_modulus = 1.5
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 2 0 0 0 3'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[]
[Preconditioning]
active = check
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000'
[]
[check]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -snes_type'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000 test'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
[Outputs]
exodus = false
[]
(modules/porous_flow/test/tests/fluidstate/brineco2_ic.i)
# Tests correct calculation of z (total mass fraction of NCG summed over all
# phases) using the PorousFlowFluidStateIC initial condition. Once z is
# calculated by the initial condition, the thermophysical properties are calculated
# and the resulting gas saturation should be equal to that given in the intial condition
[Mesh]
type = GeneratedMesh
dim = 2
[]
[GlobalParams]
PorousFlowDictator = dictator
temperature_unit = Celsius
[]
[Variables]
[pgas]
initial_condition = 1e6
[]
[z]
[]
[]
[ICs]
[z]
type = PorousFlowFluidStateIC
saturation = 0.5
gas_porepressure = pgas
temperature = 50
variable = z
xnacl = 0.1
fluid_state = fs
[]
[]
[AuxVariables]
[saturation_gas]
order = CONSTANT
family = MONOMIAL
[]
[saturation_water]
order = CONSTANT
family = MONOMIAL
[]
[]
[AuxKernels]
[saturation_water]
type = PorousFlowPropertyAux
variable = saturation_water
property = saturation
phase = 0
execute_on = timestep_end
[]
[saturation_gas]
type = PorousFlowPropertyAux
variable = saturation_gas
property = saturation
phase = 1
execute_on = timestep_end
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
variable = pgas
fluid_component = 0
[]
[mass1]
type = PorousFlowMassTimeDerivative
variable = z
fluid_component = 1
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pgas z'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureConst
pc = 0
[]
[fs]
type = PorousFlowBrineCO2
brine_fp = brine
co2_fp = co2
capillary_pressure = pc
[]
[]
[FluidProperties]
[co2]
type = CO2FluidProperties
[]
[brine]
type = BrineFluidProperties
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = 50
[]
[waterncg]
type = PorousFlowFluidState
gas_porepressure = pgas
z = z
fluid_state = fs
capillary_pressure = pc
xnacl = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-12 0 0 0 1e-12 0 0 0 1e-12'
[]
[relperm0]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[relperm1]
type = PorousFlowRelativePermeabilityCorey
n = 3
phase = 1
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[]
[Executioner]
type = Transient
solve_type = NEWTON
dt = 1
end_time = 1
nl_abs_tol = 1e-12
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Postprocessors]
[sg]
type = ElementIntegralVariablePostprocessor
variable = saturation_gas
execute_on = 'initial timestep_end'
[]
[sw]
type = ElementIntegralVariablePostprocessor
variable = saturation_water
execute_on = 'initial timestep_end'
[]
[z]
type = ElementIntegralVariablePostprocessor
variable = z
execute_on = 'initial timestep_end'
[]
[]
[Outputs]
csv = true
[]
(modules/porous_flow/test/tests/poroperm/PermFromPoro04.i)
# Testing permeability from porosity
# Trivial test, checking calculated permeability is correct
# k = k_anisotropic * k
# with log k = A * phi + B
[Mesh]
type = GeneratedMesh
dim = 1
nx = 3
xmin = 0
xmax = 3
[]
[GlobalParams]
block = 0
PorousFlowDictator = dictator
[]
[Variables]
[pp]
[InitialCondition]
type = ConstantIC
value = 0
[]
[]
[]
[Kernels]
[flux]
type = PorousFlowAdvectiveFlux
gravity = '0 0 0'
variable = pp
[]
[]
[BCs]
[ptop]
type = DirichletBC
variable = pp
boundary = right
value = 0
[]
[pbase]
type = DirichletBC
variable = pp
boundary = left
value = 1
[]
[]
[AuxVariables]
[poro]
order = CONSTANT
family = MONOMIAL
[]
[perm_x]
order = CONSTANT
family = MONOMIAL
[]
[perm_y]
order = CONSTANT
family = MONOMIAL
[]
[perm_z]
order = CONSTANT
family = MONOMIAL
[]
[]
[AuxKernels]
[poro]
type = PorousFlowPropertyAux
property = porosity
variable = poro
[]
[perm_x]
type = PorousFlowPropertyAux
property = permeability
variable = perm_x
row = 0
column = 0
[]
[perm_y]
type = PorousFlowPropertyAux
property = permeability
variable = perm_y
row = 1
column = 1
[]
[perm_z]
type = PorousFlowPropertyAux
property = permeability
variable = perm_z
row = 2
column = 2
[]
[]
[Postprocessors]
[perm_x_bottom]
type = PointValue
variable = perm_x
point = '0 0 0'
[]
[perm_y_bottom]
type = PointValue
variable = perm_y
point = '0 0 0'
[]
[perm_z_bottom]
type = PointValue
variable = perm_z
point = '0 0 0'
[]
[perm_x_top]
type = PointValue
variable = perm_x
point = '3 0 0'
[]
[perm_y_top]
type = PointValue
variable = perm_y
point = '3 0 0'
[]
[perm_z_top]
type = PointValue
variable = perm_z
point = '3 0 0'
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
# unimportant in this fully-saturated test
m = 0.8
alpha = 1e-4
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2.2e9
viscosity = 1e-3
density0 = 1000
thermal_expansion = 0
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[massfrac]
type = PorousFlowMassFraction
[]
[eff_fluid_pressure]
type = PorousFlowEffectiveFluidPressure
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosity
porosity_zero = 0.1
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 0 # unimportant in this fully-saturated situation
phase = 0
[]
[permeability]
type = PorousFlowPermeabilityExponential
k_anisotropy = '1 0 0 0 2 0 0 0 0.1'
poroperm_function = log_k
A = 4.342945
B = -8
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
[]
[]
[Executioner]
solve_type = Newton
type = Steady
l_tol = 1E-5
nl_abs_tol = 1E-3
nl_rel_tol = 1E-8
l_max_its = 200
nl_max_its = 400
petsc_options_iname = '-pc_type -pc_asm_overlap -sub_pc_type -ksp_type -ksp_gmres_restart'
petsc_options_value = ' asm 2 lu gmres 200'
[]
[Outputs]
csv = true
execute_on = 'timestep_end'
[]
(modules/porous_flow/test/tests/sinks/s07.i)
# apply a sink flux on just one component of a 3-component system and observe the correct behavior
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 1
xmin = 0
xmax = 1
ymin = 0
ymax = 1
zmin = 0
zmax = 2
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp frac0 frac1'
number_fluid_phases = 1
number_fluid_components = 3
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1.1
[]
[]
[Variables]
[pp]
[]
[frac0]
initial_condition = 0.1
[]
[frac1]
initial_condition = 0.6
[]
[]
[ICs]
[pp]
type = FunctionIC
variable = pp
function = y
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = frac0
[]
[mass1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = frac1
[]
[mass2]
type = PorousFlowMassTimeDerivative
fluid_component = 2
variable = pp
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1.3
density0 = 1.1
thermal_expansion = 0
viscosity = 1.1
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'frac0 frac1'
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '0.2 0 0 0 0.1 0 0 0 0.1'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[]
[AuxVariables]
[flux_out]
[]
[]
[Functions]
[mass1_00]
type = ParsedFunction
expression = 'frac*vol*por*dens0*exp(pp/bulk)*pow(1+pow(-al*pp,1.0/(1-m)),-m)'
symbol_names = 'frac vol por dens0 pp bulk al m'
symbol_values = 'f1_00 0.25 0.1 1.1 p00 1.3 1.1 0.5'
[]
[expected_mass_change1_00]
type = ParsedFunction
expression = 'frac*fcn*area*dt'
symbol_names = 'frac fcn area dt'
symbol_values = 'f1_00 6 0.5 1E-3'
[]
[mass1_00_expect]
type = ParsedFunction
expression = 'mass_prev-mass_change'
symbol_names = 'mass_prev mass_change'
symbol_values = 'm1_00_prev del_m1_00'
[]
[mass1_01]
type = ParsedFunction
expression = 'frac*vol*por*dens0*exp(pp/bulk)*pow(1+pow(-al*pp,1.0/(1-m)),-m)'
symbol_names = 'frac vol por dens0 pp bulk al m'
symbol_values = 'f1_01 0.25 0.1 1.1 p01 1.3 1.1 0.5'
[]
[expected_mass_change1_01]
type = ParsedFunction
expression = 'frac*fcn*area*dt'
symbol_names = 'frac fcn area dt'
symbol_values = 'f1_01 6 0.5 1E-3'
[]
[mass1_01_expect]
type = ParsedFunction
expression = 'mass_prev-mass_change'
symbol_names = 'mass_prev mass_change'
symbol_values = 'm1_01_prev del_m1_01'
[]
[]
[Postprocessors]
[f1_00]
type = PointValue
point = '0 0 0'
variable = frac1
execute_on = 'initial timestep_end'
[]
[flux_00]
type = PointValue
point = '0 0 0'
variable = flux_out
execute_on = 'initial timestep_end'
[]
[p00]
type = PointValue
point = '0 0 0'
variable = pp
execute_on = 'initial timestep_end'
[]
[m1_00]
type = FunctionValuePostprocessor
function = mass1_00
execute_on = 'initial timestep_end'
[]
[m1_00_prev]
type = FunctionValuePostprocessor
function = mass1_00
execute_on = 'timestep_begin'
outputs = 'console'
[]
[del_m1_00]
type = FunctionValuePostprocessor
function = expected_mass_change1_00
execute_on = 'timestep_end'
outputs = 'console'
[]
[m1_00_expect]
type = FunctionValuePostprocessor
function = mass1_00_expect
execute_on = 'timestep_end'
[]
[f1_01]
type = PointValue
point = '0 1 0'
variable = frac1
execute_on = 'initial timestep_end'
[]
[flux_01]
type = PointValue
point = '0 1 0'
variable = flux_out
execute_on = 'initial timestep_end'
[]
[p01]
type = PointValue
point = '0 1 0'
variable = pp
execute_on = 'initial timestep_end'
[]
[m1_01]
type = FunctionValuePostprocessor
function = mass1_01
execute_on = 'initial timestep_end'
[]
[m1_01_prev]
type = FunctionValuePostprocessor
function = mass1_01
execute_on = 'timestep_begin'
outputs = 'console'
[]
[del_m1_01]
type = FunctionValuePostprocessor
function = expected_mass_change1_01
execute_on = 'timestep_end'
outputs = 'console'
[]
[m1_01_expect]
type = FunctionValuePostprocessor
function = mass1_01_expect
execute_on = 'timestep_end'
[]
[f1_11]
type = PointValue
point = '1 1 0'
variable = frac1
execute_on = 'initial timestep_end'
[]
[flux_11]
type = PointValue
point = '1 1 0'
variable = flux_out
execute_on = 'initial timestep_end'
[]
[p11]
type = PointValue
point = '1 1 0'
variable = pp
execute_on = 'initial timestep_end'
[]
[]
[BCs]
[flux]
type = PorousFlowSink
boundary = 'left'
variable = frac1
use_mobility = false
use_relperm = false
mass_fraction_component = 1
fluid_phase = 0
flux_function = 6
save_in = flux_out
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -sub_pc_type -snes_max_it -sub_pc_factor_shift_type -pc_asm_overlap'
petsc_options_value = 'gmres asm lu 10 NONZERO 2'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1E-3
end_time = 0.01
nl_rel_tol = 1E-12
nl_abs_tol = 1E-12
[]
[Outputs]
file_base = s07
[console]
type = Console
execute_on = 'nonlinear linear'
[]
[csv]
type = CSV
execute_on = 'timestep_end'
[]
[]
(modules/porous_flow/test/tests/flux_limited_TVD_pflow/jacobian_04.i)
# Checking the Jacobian of Flux-Limited TVD Advection, 1 phase, 1 component, unsaturated, using flux_limiter_type != none
# This is quite a heavy test, but we need a fairly big mesh to check the flux-limiting+TVD is happening correctly
#
# Here we use snes_check_jacobian instead of snes_type=test. The former just checks the Jacobian for the
# random initial conditions, while the latter checks for u=1 and u=-1
#
# The Jacobian is correct for u=1 and u=-1, but the finite-difference scheme used by snes_type=test gives the
# wrong answer.
# For u=constant, the Kuzmin-Turek scheme adds as much antidiffusion as possible, resulting in a central-difference
# version of advection (flux_limiter = 1). This is correct, and the Jacobian is calculated correctly.
# However, when computing the Jacobian using finite differences, u is increased or decreased at a node.
# This results in that node being at a maximum or minimum, which means no antidiffusion should be added
# (flux_limiter = 0). This corresponds to a full-upwind scheme. So the finite-difference computes the
# Jacobian in the full-upwind scenario, which is incorrect (the original residual = 0, after finite-differencing
# the residual comes from the full-upwind scenario).
[Mesh]
type = GeneratedMesh
dim = 3
nx = 3
xmin = 0
xmax = 1
ny = 4
ymin = -1
ymax = 2
bias_y = 1.5
nz = 4
zmin = 1
zmax = 2
bias_z = 0.8
[]
[GlobalParams]
gravity = '1 2 -0.5'
PorousFlowDictator = dictator
[]
[Variables]
[pp]
[]
[]
[ICs]
[pp]
variable = pp
type = RandomIC
min = -1
max = 0
[]
[]
[Kernels]
[flux0]
type = PorousFlowFluxLimitedTVDAdvection
variable = pp
advective_flux_calculator = advective_flux_calculator
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1
density0 = 0.4
viscosity = 1.1
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
alpha = 1
m = 0.5
[]
[advective_flux_calculator]
type = PorousFlowAdvectiveFluxCalculatorUnsaturated
flux_limiter_type = minmod
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
phase = 0
n = 2
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1.21 0 0 0 1.5 0 0 0 0.8'
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
petsc_options = '-snes_check_jacobian'
[]
[]
[Executioner]
type = Transient
solve_type = Linear # this is to force convergence even though the nonlinear residual is high: we just care about the Jacobian in this test
end_time = 1
num_steps = 1
dt = 1
[]
(modules/porous_flow/examples/coal_mining/fine_with_fluid.i)
#################################################################
#
# NOTE:
# The mesh for this model is too large for the MOOSE repository
# so is kept in the the large_media submodule
#
#################################################################
#
# Strata deformation and fluid flow aaround a coal mine - 3D model
#
# A "half model" is used. The mine is 400m deep and
# just the roof is studied (-400<=z<=0). The mining panel
# sits between 0<=x<=150, and 0<=y<=1000, so this simulates
# a coal panel that is 300m wide and 1000m long. The outer boundaries
# are 1km from the excavation boundaries.
#
# The excavation takes 0.5 years.
#
# The boundary conditions for this simulation are:
# - disp_x = 0 at x=0 and x=1150
# - disp_y = 0 at y=-1000 and y=1000
# - disp_z = 0 at z=-400, but there is a time-dependent
# Young modulus that simulates excavation
# - wc_x = 0 at y=-1000 and y=1000
# - wc_y = 0 at x=0 and x=1150
# - no flow at x=0, z=-400 and z=0
# - fixed porepressure at y=-1000, y=1000 and x=1150
# That is, rollers on the sides, free at top,
# and prescribed at bottom in the unexcavated portion.
#
# A single-phase unsaturated fluid is used.
#
# The small strain formulation is used.
#
# All stresses are measured in MPa, and time units are measured in years.
#
# The initial porepressure is hydrostatic with P=0 at z=0, so
# Porepressure ~ - 0.01*z MPa, where the fluid has density 1E3 kg/m^3 and
# gravity = = 10 m.s^-2 = 1E-5 MPa m^2/kg.
# To be more accurate, i use
# Porepressure = -bulk * log(1 + g*rho0*z/bulk)
# where bulk=2E3 MPa and rho0=1Ee kg/m^3.
# The initial stress is consistent with the weight force from undrained
# density 2500 kg/m^3, and fluid porepressure, and a Biot coefficient of 0.7, ie,
# stress_zz^effective = 0.025*z + 0.7 * initial_porepressure
# The maximum and minimum principal horizontal effective stresses are
# assumed to be equal to 0.8*stress_zz.
#
# Material properties:
# Young's modulus = 8 GPa
# Poisson's ratio = 0.25
# Cosserat layer thickness = 1 m
# Cosserat-joint normal stiffness = large
# Cosserat-joint shear stiffness = 1 GPa
# MC cohesion = 2 MPa
# MC friction angle = 35 deg
# MC dilation angle = 8 deg
# MC tensile strength = 1 MPa
# MC compressive strength = 100 MPa
# WeakPlane cohesion = 0.1 MPa
# WeakPlane friction angle = 30 deg
# WeakPlane dilation angle = 10 deg
# WeakPlane tensile strength = 0.1 MPa
# WeakPlane compressive strength = 100 MPa softening to 1 MPa at strain = 1
# Fluid density at zero porepressure = 1E3 kg/m^3
# Fluid bulk modulus = 2E3 MPa
# Fluid viscosity = 1.1E-3 Pa.s = 1.1E-9 MPa.s = 3.5E-17 MPa.year
#
[GlobalParams]
perform_finite_strain_rotations = false
displacements = 'disp_x disp_y disp_z'
Cosserat_rotations = 'wc_x wc_y wc_z'
PorousFlowDictator = dictator
biot_coefficient = 0.7
[]
[Mesh]
[file]
type = FileMeshGenerator
file = fine.e
[]
[xmin]
type = SideSetsAroundSubdomainGenerator
block = '2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30'
new_boundary = xmin
normal = '-1 0 0'
input = file
[]
[xmax]
type = SideSetsAroundSubdomainGenerator
block = '2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30'
new_boundary = xmax
normal = '1 0 0'
input = xmin
[]
[ymin]
type = SideSetsAroundSubdomainGenerator
block = '2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30'
new_boundary = ymin
normal = '0 -1 0'
input = xmax
[]
[ymax]
type = SideSetsAroundSubdomainGenerator
block = '2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30'
new_boundary = ymax
normal = '0 1 0'
input = ymin
[]
[zmax]
type = SideSetsAroundSubdomainGenerator
block = 30
new_boundary = zmax
normal = '0 0 1'
input = ymax
[]
[zmin]
type = SideSetsAroundSubdomainGenerator
block = 2
new_boundary = zmin
normal = '0 0 -1'
input = zmax
[]
[excav]
type = SubdomainBoundingBoxGenerator
input = zmin
block_id = 1
bottom_left = '0 0 -400'
top_right = '150 1000 -397'
[]
[roof]
type = SideSetsBetweenSubdomainsGenerator
primary_block = 3
paired_block = 1
input = excav
new_boundary = roof
[]
[]
[Variables]
[disp_x]
[]
[disp_y]
[]
[disp_z]
[]
[wc_x]
[]
[wc_y]
[]
[porepressure]
scaling = 1E-5
[]
[]
[ICs]
[porepressure]
type = FunctionIC
variable = porepressure
function = ini_pp
[]
[]
[Kernels]
[cx_elastic]
type = CosseratStressDivergenceTensors
use_displaced_mesh = false
variable = disp_x
component = 0
[]
[cy_elastic]
type = CosseratStressDivergenceTensors
use_displaced_mesh = false
variable = disp_y
component = 1
[]
[cz_elastic]
type = CosseratStressDivergenceTensors
use_displaced_mesh = false
variable = disp_z
component = 2
[]
[x_couple]
type = StressDivergenceTensors
use_displaced_mesh = false
variable = wc_x
displacements = 'wc_x wc_y wc_z'
component = 0
base_name = couple
[]
[y_couple]
type = StressDivergenceTensors
use_displaced_mesh = false
variable = wc_y
displacements = 'wc_x wc_y wc_z'
component = 1
base_name = couple
[]
[x_moment]
type = MomentBalancing
use_displaced_mesh = false
variable = wc_x
component = 0
[]
[y_moment]
type = MomentBalancing
use_displaced_mesh = false
variable = wc_y
component = 1
[]
[gravity]
type = Gravity
use_displaced_mesh = false
variable = disp_z
value = -10E-6 # remember this is in MPa
[]
[poro_x]
type = PorousFlowEffectiveStressCoupling
use_displaced_mesh = false
variable = disp_x
component = 0
[]
[poro_y]
type = PorousFlowEffectiveStressCoupling
use_displaced_mesh = false
variable = disp_y
component = 1
[]
[poro_z]
type = PorousFlowEffectiveStressCoupling
use_displaced_mesh = false
component = 2
variable = disp_z
[]
[poro_vol_exp]
type = PorousFlowMassVolumetricExpansion
use_displaced_mesh = false
block = '2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30'
variable = porepressure
fluid_component = 0
[]
[mass0]
type = PorousFlowMassTimeDerivative
use_displaced_mesh = false
fluid_component = 0
variable = porepressure
[]
[flux]
type = PorousFlowAdvectiveFlux
use_displaced_mesh = false
variable = porepressure
gravity = '0 0 -10E-6'
fluid_component = 0
[]
[]
[AuxVariables]
[saturation]
order = CONSTANT
family = MONOMIAL
[]
[darcy_x]
order = CONSTANT
family = MONOMIAL
[]
[darcy_y]
order = CONSTANT
family = MONOMIAL
[]
[darcy_z]
order = CONSTANT
family = MONOMIAL
[]
[porosity]
order = CONSTANT
family = MONOMIAL
[]
[wc_z]
[]
[stress_xx]
order = CONSTANT
family = MONOMIAL
[]
[stress_xy]
order = CONSTANT
family = MONOMIAL
[]
[stress_xz]
order = CONSTANT
family = MONOMIAL
[]
[stress_yx]
order = CONSTANT
family = MONOMIAL
[]
[stress_yy]
order = CONSTANT
family = MONOMIAL
[]
[stress_yz]
order = CONSTANT
family = MONOMIAL
[]
[stress_zx]
order = CONSTANT
family = MONOMIAL
[]
[stress_zy]
order = CONSTANT
family = MONOMIAL
[]
[stress_zz]
order = CONSTANT
family = MONOMIAL
[]
[total_strain_xx]
order = CONSTANT
family = MONOMIAL
[]
[total_strain_xy]
order = CONSTANT
family = MONOMIAL
[]
[total_strain_xz]
order = CONSTANT
family = MONOMIAL
[]
[total_strain_yx]
order = CONSTANT
family = MONOMIAL
[]
[total_strain_yy]
order = CONSTANT
family = MONOMIAL
[]
[total_strain_yz]
order = CONSTANT
family = MONOMIAL
[]
[total_strain_zx]
order = CONSTANT
family = MONOMIAL
[]
[total_strain_zy]
order = CONSTANT
family = MONOMIAL
[]
[total_strain_zz]
order = CONSTANT
family = MONOMIAL
[]
[perm_xx]
order = CONSTANT
family = MONOMIAL
[]
[perm_yy]
order = CONSTANT
family = MONOMIAL
[]
[perm_zz]
order = CONSTANT
family = MONOMIAL
[]
[mc_shear]
order = CONSTANT
family = MONOMIAL
[]
[mc_tensile]
order = CONSTANT
family = MONOMIAL
[]
[wp_shear]
order = CONSTANT
family = MONOMIAL
[]
[wp_tensile]
order = CONSTANT
family = MONOMIAL
[]
[wp_shear_f]
order = CONSTANT
family = MONOMIAL
[]
[wp_tensile_f]
order = CONSTANT
family = MONOMIAL
[]
[mc_shear_f]
order = CONSTANT
family = MONOMIAL
[]
[mc_tensile_f]
order = CONSTANT
family = MONOMIAL
[]
[]
[AuxKernels]
[saturation_water]
type = PorousFlowPropertyAux
variable = saturation
property = saturation
phase = 0
execute_on = timestep_end
[]
[darcy_x]
type = PorousFlowDarcyVelocityComponent
variable = darcy_x
gravity = '0 0 -10E-6'
component = x
[]
[darcy_y]
type = PorousFlowDarcyVelocityComponent
variable = darcy_y
gravity = '0 0 -10E-6'
component = y
[]
[darcy_z]
type = PorousFlowDarcyVelocityComponent
variable = darcy_z
gravity = '0 0 -10E-6'
component = z
[]
[porosity]
type = PorousFlowPropertyAux
property = porosity
variable = porosity
execute_on = timestep_end
[]
[stress_xx]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xx
index_i = 0
index_j = 0
execute_on = timestep_end
[]
[stress_xy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xy
index_i = 0
index_j = 1
execute_on = timestep_end
[]
[stress_xz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xz
index_i = 0
index_j = 2
execute_on = timestep_end
[]
[stress_yx]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yx
index_i = 1
index_j = 0
execute_on = timestep_end
[]
[stress_yy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yy
index_i = 1
index_j = 1
execute_on = timestep_end
[]
[stress_yz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yz
index_i = 1
index_j = 2
execute_on = timestep_end
[]
[stress_zx]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_zx
index_i = 2
index_j = 0
execute_on = timestep_end
[]
[stress_zy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_zy
index_i = 2
index_j = 1
execute_on = timestep_end
[]
[stress_zz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_zz
index_i = 2
index_j = 2
execute_on = timestep_end
[]
[total_strain_xx]
type = RankTwoAux
rank_two_tensor = total_strain
variable = total_strain_xx
index_i = 0
index_j = 0
execute_on = timestep_end
[]
[total_strain_xy]
type = RankTwoAux
rank_two_tensor = total_strain
variable = total_strain_xy
index_i = 0
index_j = 1
execute_on = timestep_end
[]
[total_strain_xz]
type = RankTwoAux
rank_two_tensor = total_strain
variable = total_strain_xz
index_i = 0
index_j = 2
execute_on = timestep_end
[]
[total_strain_yx]
type = RankTwoAux
rank_two_tensor = total_strain
variable = total_strain_yx
index_i = 1
index_j = 0
execute_on = timestep_end
[]
[total_strain_yy]
type = RankTwoAux
rank_two_tensor = total_strain
variable = total_strain_yy
index_i = 1
index_j = 1
execute_on = timestep_end
[]
[total_strain_yz]
type = RankTwoAux
rank_two_tensor = total_strain
variable = total_strain_yz
index_i = 1
index_j = 2
execute_on = timestep_end
[]
[total_strain_zx]
type = RankTwoAux
rank_two_tensor = total_strain
variable = total_strain_zx
index_i = 2
index_j = 0
execute_on = timestep_end
[]
[total_strain_zy]
type = RankTwoAux
rank_two_tensor = total_strain
variable = total_strain_zy
index_i = 2
index_j = 1
execute_on = timestep_end
[]
[total_strain_zz]
type = RankTwoAux
rank_two_tensor = total_strain
variable = total_strain_zz
index_i = 2
index_j = 2
execute_on = timestep_end
[]
[perm_xx]
type = PorousFlowPropertyAux
property = permeability
variable = perm_xx
row = 0
column = 0
execute_on = timestep_end
[]
[perm_yy]
type = PorousFlowPropertyAux
property = permeability
variable = perm_yy
row = 1
column = 1
execute_on = timestep_end
[]
[perm_zz]
type = PorousFlowPropertyAux
property = permeability
variable = perm_zz
row = 2
column = 2
execute_on = timestep_end
[]
[mc_shear]
type = MaterialStdVectorAux
index = 0
property = mc_plastic_internal_parameter
variable = mc_shear
execute_on = timestep_end
[]
[mc_tensile]
type = MaterialStdVectorAux
index = 1
property = mc_plastic_internal_parameter
variable = mc_tensile
execute_on = timestep_end
[]
[wp_shear]
type = MaterialStdVectorAux
index = 0
property = wp_plastic_internal_parameter
variable = wp_shear
execute_on = timestep_end
[]
[wp_tensile]
type = MaterialStdVectorAux
index = 1
property = wp_plastic_internal_parameter
variable = wp_tensile
execute_on = timestep_end
[]
[mc_shear_f]
type = MaterialStdVectorAux
index = 6
property = mc_plastic_yield_function
variable = mc_shear_f
execute_on = timestep_end
[]
[mc_tensile_f]
type = MaterialStdVectorAux
index = 0
property = mc_plastic_yield_function
variable = mc_tensile_f
execute_on = timestep_end
[]
[wp_shear_f]
type = MaterialStdVectorAux
index = 0
property = wp_plastic_yield_function
variable = wp_shear_f
execute_on = timestep_end
[]
[wp_tensile_f]
type = MaterialStdVectorAux
index = 1
property = wp_plastic_yield_function
variable = wp_tensile_f
execute_on = timestep_end
[]
[]
[BCs]
[no_x]
type = DirichletBC
variable = disp_x
boundary = 'xmin xmax'
value = 0.0
[]
[no_y]
type = DirichletBC
variable = disp_y
boundary = 'ymin ymax'
value = 0.0
[]
[no_z]
type = DirichletBC
variable = disp_z
boundary = zmin
value = 0.0
[]
[no_wc_x]
type = DirichletBC
variable = wc_x
boundary = 'ymin ymax'
value = 0.0
[]
[no_wc_y]
type = DirichletBC
variable = wc_y
boundary = 'xmin xmax'
value = 0.0
[]
[fix_porepressure]
type = FunctionDirichletBC
variable = porepressure
boundary = 'ymin ymax xmax'
function = ini_pp
[]
[roof_porepressure]
type = PorousFlowPiecewiseLinearSink
variable = porepressure
pt_vals = '-1E3 1E3'
multipliers = '-1 1'
fluid_phase = 0
flux_function = roof_conductance
boundary = roof
[]
[roof]
type = StickyBC
variable = disp_z
min_value = -3.0
boundary = roof
[]
[]
[Functions]
[ini_pp]
type = ParsedFunction
symbol_names = 'bulk p0 g rho0'
symbol_values = '2E3 0.0 1E-5 1E3'
expression = '-bulk*log(exp(-p0/bulk)+g*rho0*z/bulk)'
[]
[ini_xx]
type = ParsedFunction
symbol_names = 'bulk p0 g rho0 biot'
symbol_values = '2E3 0.0 1E-5 1E3 0.7'
expression = '0.8*(2500*10E-6*z+biot*(-bulk*log(exp(-p0/bulk)+g*rho0*z/bulk)))'
[]
[ini_zz]
type = ParsedFunction
symbol_names = 'bulk p0 g rho0 biot'
symbol_values = '2E3 0.0 1E-5 1E3 0.7'
expression = '2500*10E-6*z+biot*(-bulk*log(exp(-p0/bulk)+g*rho0*z/bulk))'
[]
[excav_sideways]
type = ParsedFunction
symbol_names = 'end_t ymin ymax minval maxval slope'
symbol_values = '0.5 0 1000.0 1E-9 1 10'
# excavation face at ymin+(ymax-ymin)*min(t/end_t,1)
# slope is the distance over which the modulus reduces from maxval to minval
expression = 'if(y<ymin+(ymax-ymin)*min(t/end_t,1),minval,if(y<ymin+(ymax-ymin)*min(t/end_t,1)+slope,minval+(maxval-minval)*(y-(ymin+(ymax-ymin)*min(t/end_t,1)))/slope,maxval))'
[]
[density_sideways]
type = ParsedFunction
symbol_names = 'end_t ymin ymax minval maxval'
symbol_values = '0.5 0 1000.0 0 2500'
expression = 'if(y<ymin+(ymax-ymin)*min(t/end_t,1),minval,maxval)'
[]
[roof_conductance]
type = ParsedFunction
symbol_names = 'end_t ymin ymax maxval minval'
symbol_values = '0.5 0 1000.0 1E7 0'
expression = 'if(y<ymin+(ymax-ymin)*min(t/end_t,1),maxval,minval)'
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'porepressure disp_x disp_y disp_z'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1 # MPa^-1
[]
[mc_coh_strong_harden]
type = TensorMechanicsHardeningExponential
value_0 = 1.99 # MPa
value_residual = 2.01 # MPa
rate = 1.0
[]
[mc_fric]
type = TensorMechanicsHardeningConstant
value = 0.61 # 35deg
[]
[mc_dil]
type = TensorMechanicsHardeningConstant
value = 0.15 # 8deg
[]
[mc_tensile_str_strong_harden]
type = TensorMechanicsHardeningExponential
value_0 = 1.0 # MPa
value_residual = 1.0 # MPa
rate = 1.0
[]
[mc_compressive_str]
type = TensorMechanicsHardeningCubic
value_0 = 100 # Large!
value_residual = 100
internal_limit = 0.1
[]
[wp_coh_harden]
type = TensorMechanicsHardeningCubic
value_0 = 0.05
value_residual = 0.05
internal_limit = 10
[]
[wp_tan_fric]
type = TensorMechanicsHardeningConstant
value = 0.26 # 15deg
[]
[wp_tan_dil]
type = TensorMechanicsHardeningConstant
value = 0.18 # 10deg
[]
[wp_tensile_str_harden]
type = TensorMechanicsHardeningCubic
value_0 = 0.05
value_residual = 0.05
internal_limit = 10
[]
[wp_compressive_str_soften]
type = TensorMechanicsHardeningCubic
value_0 = 100
value_residual = 1
internal_limit = 1.0
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2E3
density0 = 1000
thermal_expansion = 0
viscosity = 3.5E-17
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[eff_fluid_pressure]
type = PorousFlowEffectiveFluidPressure
[]
[vol_strain]
type = PorousFlowVolumetricStrain
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = porepressure
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity_for_aux]
type = PorousFlowPorosity
at_nodes = false
fluid = true
mechanical = true
ensure_positive = true
porosity_zero = 0.02
solid_bulk = 5.3333E3
[]
[porosity_bulk]
type = PorousFlowPorosity
fluid = true
mechanical = true
block = '2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30'
ensure_positive = true
porosity_zero = 0.02
solid_bulk = 5.3333E3
[]
[porosity_excav]
type = PorousFlowPorosityConst
block = 1
porosity = 1.0
[]
[permeability_bulk]
type = PorousFlowPermeabilityKozenyCarman
block = '2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30'
poroperm_function = kozeny_carman_phi0
k0 = 1E-15
phi0 = 0.02
n = 2
m = 2
[]
[permeability_excav]
type = PorousFlowPermeabilityConst
block = 1
permeability = '0 0 0 0 0 0 0 0 0'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 4
s_res = 0.4
sum_s_res = 0.4
phase = 0
[]
[elasticity_tensor_0]
type = ComputeLayeredCosseratElasticityTensor
block = '2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30'
young = 8E3 # MPa
poisson = 0.25
layer_thickness = 1.0
joint_normal_stiffness = 1E9 # huge
joint_shear_stiffness = 1E3 # MPa
[]
[elasticity_tensor_1]
type = ComputeLayeredCosseratElasticityTensor
block = 1
young = 8E3 # MPa
poisson = 0.25
layer_thickness = 1.0
joint_normal_stiffness = 1E9 # huge
joint_shear_stiffness = 1E3 # MPa
elasticity_tensor_prefactor = excav_sideways
[]
[strain]
type = ComputeCosseratIncrementalSmallStrain
eigenstrain_names = ini_stress
[]
[ini_stress]
type = ComputeEigenstrainFromInitialStress
eigenstrain_name = ini_stress
initial_stress = 'ini_xx 0 0 0 ini_xx 0 0 0 ini_zz'
[]
[stress_0]
type = ComputeMultipleInelasticCosseratStress
block = '2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30'
inelastic_models = 'mc wp'
cycle_models = true
relative_tolerance = 2.0
absolute_tolerance = 1E6
max_iterations = 1
tangent_operator = nonlinear
perform_finite_strain_rotations = false
[]
[stress_1]
type = ComputeMultipleInelasticCosseratStress
block = 1
inelastic_models = ''
relative_tolerance = 2.0
absolute_tolerance = 1E6
max_iterations = 1
tangent_operator = nonlinear
perform_finite_strain_rotations = false
[]
[mc]
type = CappedMohrCoulombCosseratStressUpdate
warn_about_precision_loss = false
host_youngs_modulus = 8E3
host_poissons_ratio = 0.25
base_name = mc
tensile_strength = mc_tensile_str_strong_harden
compressive_strength = mc_compressive_str
cohesion = mc_coh_strong_harden
friction_angle = mc_fric
dilation_angle = mc_dil
max_NR_iterations = 100000
smoothing_tol = 0.1 # MPa # Must be linked to cohesion
yield_function_tol = 1E-9 # MPa. this is essentially the lowest possible without lots of precision loss
perfect_guess = true
min_step_size = 1.0
[]
[wp]
type = CappedWeakPlaneCosseratStressUpdate
warn_about_precision_loss = false
base_name = wp
cohesion = wp_coh_harden
tan_friction_angle = wp_tan_fric
tan_dilation_angle = wp_tan_dil
tensile_strength = wp_tensile_str_harden
compressive_strength = wp_compressive_str_soften
max_NR_iterations = 10000
tip_smoother = 0.05
smoothing_tol = 0.05 # MPa # Note, this must be tied to cohesion, otherwise get no possible return at cone apex
yield_function_tol = 1E-11 # MPa. this is essentially the lowest possible without lots of precision loss
perfect_guess = true
min_step_size = 1.0E-3
[]
[undrained_density_0]
type = GenericConstantMaterial
block = '2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30'
prop_names = density
prop_values = 2500
[]
[undrained_density_1]
type = GenericFunctionMaterial
block = 1
prop_names = density
prop_values = density_sideways
[]
[]
[Preconditioning]
[SMP]
type = SMP
full = true
[]
[]
[Postprocessors]
[min_roof_disp]
type = NodalExtremeValue
boundary = roof
value_type = min
variable = disp_z
[]
[min_roof_pp]
type = NodalExtremeValue
boundary = roof
value_type = min
variable = porepressure
[]
[min_surface_disp]
type = NodalExtremeValue
boundary = zmax
value_type = min
variable = disp_z
[]
[min_surface_pp]
type = NodalExtremeValue
boundary = zmax
value_type = min
variable = porepressure
[]
[max_perm_zz]
type = ElementExtremeValue
block = '2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30'
variable = perm_zz
[]
[]
[Executioner]
type = Transient
solve_type = 'NEWTON'
petsc_options = '-snes_converged_reason'
# best overall
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = ' lu mumps'
# best if you don't have mumps:
#petsc_options_iname = '-pc_type -pc_asm_overlap -sub_pc_type -ksp_type -ksp_gmres_restart'
#petsc_options_value = ' asm 2 lu gmres 200'
# very basic:
#petsc_options_iname = '-pc_type -ksp_type -ksp_gmres_restart'
#petsc_options_value = ' bjacobi gmres 200'
line_search = bt
nl_abs_tol = 1e-3
nl_rel_tol = 1e-5
l_max_its = 200
nl_max_its = 30
start_time = 0.0
dt = 0.0025
end_time = 0.5
[]
[Outputs]
time_step_interval = 1
print_linear_residuals = true
exodus = true
csv = true
console = true
[]
(modules/porous_flow/test/tests/dirackernels/bh_except05.i)
# PorousFlowPeacemanBorehole exception test
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 1
xmin = -1
xmax = 1
ymin = -1
ymax = 1
zmin = -1
zmax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
initial_condition = 1E7
[]
[]
[Kernels]
[mass0]
type = TimeDerivative
variable = pp
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[borehole_total_outflow_mass]
type = PorousFlowSumQuantity
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1e-7
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e9
viscosity = 1e-3
density0 = 1000
thermal_expansion = 0
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-12 0 0 0 1E-12 0 0 0 1E-12'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[]
[DiracKernels]
[bh]
type = PorousFlowPeacemanBorehole
bottom_p_or_t = 0
fluid_phase = 0
mass_fraction_component = 0
point_file = bh02.bh
SumQuantityUO = borehole_total_outflow_mass
variable = pp
unit_weight = '0 0 0'
character = 1
[]
[]
[Postprocessors]
[bh_report]
type = PorousFlowPlotQuantity
uo = borehole_total_outflow_mass
[]
[fluid_mass0]
type = PorousFlowFluidMass
execute_on = timestep_begin
[]
[fluid_mass1]
type = PorousFlowFluidMass
execute_on = timestep_end
[]
[zmass_error]
type = FunctionValuePostprocessor
function = mass_bal_fcn
execute_on = timestep_end
[]
[p0]
type = PointValue
variable = pp
point = '0 0 0'
execute_on = timestep_end
[]
[]
[Functions]
[mass_bal_fcn]
type = ParsedFunction
expression = abs((a-c+d)/2/(a+c))
symbol_names = 'a c d'
symbol_values = 'fluid_mass1 fluid_mass0 bh_report'
[]
[]
[Preconditioning]
[usual]
type = SMP
full = true
petsc_options = '-snes_converged_reason'
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -ksp_max_it'
petsc_options_value = 'bcgs bjacobi 1E-10 1E-10 10000 30'
[]
[]
[Executioner]
type = Transient
end_time = 0.5
dt = 1E-2
solve_type = NEWTON
[]
(modules/porous_flow/test/tests/gravity/grav02b_fv.i)
# Checking that gravity head is established in the steady-state situation when 0<saturation<1 (note the strictly less-than).
# 2phase (PP), 2components, vanGenuchten, constant fluid bulk-moduli for each phase, constant viscosity, constant permeability, Corey relative perm
# For better agreement with the analytical solution (ana_pp), just increase nx
[Mesh]
type = GeneratedMesh
dim = 1
nx = 10
xmin = -1
xmax = 0
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[ppwater]
type = MooseVariableFVReal
initial_condition = -1.0
[]
[ppgas]
type = MooseVariableFVReal
initial_condition = 0
[]
[]
[AuxVariables]
[massfrac_ph0_sp0]
type = MooseVariableFVReal
initial_condition = 1
[]
[massfrac_ph1_sp0]
type = MooseVariableFVReal
initial_condition = 0
[]
[]
[FVKernels]
[flux0]
type = FVPorousFlowAdvectiveFlux
fluid_component = 0
variable = ppwater
gravity = '-1 0 0'
[]
[flux1]
type = FVPorousFlowAdvectiveFlux
fluid_component = 1
variable = ppgas
gravity = '-1 0 0'
[]
[]
[FVBCs]
[ppwater]
type = FVDirichletBC
boundary = right
variable = ppwater
value = -1
[]
[ppgas]
type = FVDirichletBC
boundary = right
variable = ppgas
value = 0
[]
[]
[Functions]
[ana_ppwater]
type = ParsedFunction
symbol_names = 'g B p0 rho0'
symbol_values = '1 2 pp_water_top 1'
expression = '-B*log(exp(-p0/B)+g*rho0*x/B)' # expected pp at base
[]
[ana_ppgas]
type = ParsedFunction
symbol_names = 'g B p0 rho0'
symbol_values = '1 1 pp_gas_top 0.1'
expression = '-B*log(exp(-p0/B)+g*rho0*x/B)' # expected pp at base
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'ppwater ppgas'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 2
density0 = 1
viscosity = 1
thermal_expansion = 0
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 1
density0 = 0.1
viscosity = 0.5
thermal_expansion = 0
[]
[]
[Materials]
[temperature]
type = ADPorousFlowTemperature
[]
[ppss]
type = ADPorousFlow2PhasePP
phase0_porepressure = ppwater
phase1_porepressure = ppgas
capillary_pressure = pc
[]
[massfrac]
type = ADPorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph1_sp0'
[]
[simple_fluid0]
type = ADPorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = ADPorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[permeability]
type = ADPorousFlowPermeabilityConst
permeability = '1 0 0 0 2 0 0 0 3'
[]
[relperm_water]
type = ADPorousFlowRelativePermeabilityCorey
n = 1
phase = 0
[]
[relperm_gas]
type = ADPorousFlowRelativePermeabilityCorey
n = 1
phase = 1
[]
[]
[Postprocessors]
[pp_water_top]
type = PointValue
variable = ppwater
point = '0 0 0'
[]
[pp_water_base]
type = PointValue
variable = ppwater
point = '-1 0 0'
[]
[pp_water_analytical]
type = FunctionValuePostprocessor
function = ana_ppwater
point = '-1 0 0'
[]
[pp_gas_top]
type = PointValue
variable = ppgas
point = '0 0 0'
[]
[pp_gas_base]
type = PointValue
variable = ppgas
point = '-1 0 0'
[]
[pp_gas_analytical]
type = FunctionValuePostprocessor
function = ana_ppgas
point = '-1 0 0'
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Steady
solve_type = Newton
[]
[Outputs]
[csv]
type = CSV
[]
[]
(modules/porous_flow/test/tests/sinks/s09.i)
# Apply a piecewise-linear sink flux to the right-hand side and watch fluid flow to it
#
# This test has a single phase with two components. The test initialises with
# the porous material fully filled with component=1. The left-hand side is fixed
# at porepressure=1 and mass-fraction of the zeroth component being unity.
# The right-hand side has a very strong piecewise-linear flux that keeps the
# porepressure~0 at that side. Fluid mass is extracted by this flux in proportion
# to the fluid component mass fraction.
#
# Therefore, the zeroth fluid component will flow from left to right (down the
# pressure gradient).
#
# The important DE is
# porosity * dc/dt = (perm / visc) * grad(P) * grad(c)
# which is true for c = mass-fraction, and very large bulk modulus of the fluid.
# For grad(P) constant in time and space (as in this example) this is just the
# advection equation for c, with velocity = perm / visc / porosity. The parameters
# are chosen to velocity = 1 m/s.
# In the numerical world, and especially with full upwinding, the advection equation
# suffers from diffusion. In this example, the diffusion is obvious when plotting
# the mass-fraction along the line, but the average velocity of the front is still
# correct at 1 m/s.
[Mesh]
type = GeneratedMesh
dim = 1
nx = 100
xmin = 0
xmax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp frac'
number_fluid_phases = 1
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[Variables]
[pp]
[]
[frac]
[]
[]
[ICs]
[pp]
type = FunctionIC
variable = pp
function = 1-x
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = frac
[]
[mass1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = pp
[]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
gravity = '0 0 0'
variable = frac
[]
[flux1]
type = PorousFlowAdvectiveFlux
fluid_component = 1
gravity = '0 0 0'
variable = pp
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1e10 # need large in order for constant-velocity advection
density0 = 1 # almost irrelevant, except that the ability of the right BC to keep P fixed at zero is related to density_P0
thermal_expansion = 0
viscosity = 11
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = frac
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1.1 0 0 0 1.1 0 0 0 1.1'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 2 # irrelevant in this fully-saturated situation
phase = 0
[]
[]
[BCs]
[lhs_fixed_a]
type = DirichletBC
boundary = 'left'
variable = frac
value = 1
[]
[lhs_fixed_b]
type = DirichletBC
boundary = 'left'
variable = pp
value = 1
[]
[flux0]
type = PorousFlowPiecewiseLinearSink
boundary = 'right'
pt_vals = '-100 100'
multipliers = '-1 1'
variable = frac # the zeroth comonent
mass_fraction_component = 0
use_mobility = false
use_relperm = false
fluid_phase = 0
flux_function = 1E4
[]
[flux1]
type = PorousFlowPiecewiseLinearSink
boundary = 'right'
pt_vals = '-100 100'
multipliers = '-1 1'
variable = pp # comonent 1
mass_fraction_component = 1
use_mobility = false
use_relperm = false
fluid_phase = 0
flux_function = 1E4
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -sub_pc_type -snes_max_it -sub_pc_factor_shift_type -pc_asm_overlap'
petsc_options_value = 'gmres asm lu 10000 NONZERO 2'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1E-2
end_time = 1
nl_rel_tol = 1E-12
nl_abs_tol = 1E-12
[]
[VectorPostprocessors]
[mf]
type = LineValueSampler
start_point = '0 0 0'
end_point = '1 0 0'
num_points = 100
sort_by = x
variable = frac
[]
[]
[Outputs]
file_base = s09
[console]
type = Console
execute_on = 'nonlinear linear'
[]
[csv]
type = CSV
sync_times = '0.1 0.5 1'
sync_only = true
[]
time_step_interval = 10
[]
(modules/porous_flow/test/tests/gravity/grav02a.i)
# Checking that gravity head is established in the transient situation when 0<saturation<1 (note the strictly less-than).
# 2phase (PP), 2components, vanGenuchten, constant fluid bulk-moduli for each phase, constant viscosity, constant permeability, Corey relative perm
# For better agreement with the analytical solution (ana_pp), just increase nx
[Mesh]
type = GeneratedMesh
dim = 1
nx = 10
xmin = -1
xmax = 0
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[ppwater]
initial_condition = -1.0
[]
[ppgas]
initial_condition = 0
[]
[]
[AuxVariables]
[massfrac_ph0_sp0]
initial_condition = 1
[]
[massfrac_ph1_sp0]
initial_condition = 0
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = ppwater
[]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = ppwater
gravity = '-1 0 0'
[]
[mass1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = ppgas
[]
[flux1]
type = PorousFlowAdvectiveFlux
fluid_component = 1
variable = ppgas
gravity = '-1 0 0'
[]
[]
[Functions]
[ana_ppwater]
type = ParsedFunction
symbol_names = 'g B p0 rho0'
symbol_values = '1 2 pp_water_top 1'
expression = '-B*log(exp(-p0/B)+g*rho0*x/B)' # expected pp at base
[]
[ana_ppgas]
type = ParsedFunction
symbol_names = 'g B p0 rho0'
symbol_values = '1 1 pp_gas_top 0.1'
expression = '-B*log(exp(-p0/B)+g*rho0*x/B)' # expected pp at base
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'ppwater ppgas'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 2
density0 = 1
viscosity = 1
thermal_expansion = 0
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 1
density0 = 0.1
viscosity = 0.5
thermal_expansion = 0
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePP
phase0_porepressure = ppwater
phase1_porepressure = ppgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph1_sp0'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 2 0 0 0 3'
[]
[relperm_water]
type = PorousFlowRelativePermeabilityCorey
n = 1
phase = 0
[]
[relperm_gas]
type = PorousFlowRelativePermeabilityCorey
n = 1
phase = 1
[]
[]
[Postprocessors]
[pp_water_top]
type = PointValue
variable = ppwater
point = '0 0 0'
[]
[pp_water_base]
type = PointValue
variable = ppwater
point = '-1 0 0'
[]
[pp_water_analytical]
type = FunctionValuePostprocessor
function = ana_ppwater
point = '-1 0 0'
[]
[pp_gas_top]
type = PointValue
variable = ppgas
point = '0 0 0'
[]
[pp_gas_base]
type = PointValue
variable = ppgas
point = '-1 0 0'
[]
[pp_gas_analytical]
type = FunctionValuePostprocessor
function = ana_ppgas
point = '-1 0 0'
[]
[mass_ph0]
type = PorousFlowFluidMass
fluid_component = 0
execute_on = 'initial timestep_end'
[]
[mass_ph1]
type = PorousFlowFluidMass
fluid_component = 1
execute_on = 'initial timestep_end'
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 0.1
end_time = 1.0
nl_rel_tol = 1E-10
nl_abs_tol = 1E-12
[]
[Outputs]
[csv]
type = CSV
file_base = grav02a
execute_on = 'initial final'
[]
[]
(modules/porous_flow/test/tests/poroperm/PermFromPoro01_fv.i)
# Testing permeability from porosity
# Trivial test, checking calculated permeability is correct
# k = k_anisotropic * f * d^2 * phi^n / (1-phi)^m
[Mesh]
[mesh]
type = GeneratedMeshGenerator
dim = 1
nx = 3
xmin = 0
xmax = 3
[]
[]
[GlobalParams]
block = 0
PorousFlowDictator = dictator
[]
[Variables]
[pp]
type = MooseVariableFVReal
[FVInitialCondition]
type = FVConstantIC
value = 0
[]
[]
[]
[FVKernels]
[flux]
type = FVPorousFlowAdvectiveFlux
gravity = '0 0 0'
variable = pp
[]
[]
[FVBCs]
[ptop]
type = FVDirichletBC
variable = pp
boundary = right
value = 0
[]
[pbase]
type = FVDirichletBC
variable = pp
boundary = left
value = 1
[]
[]
[AuxVariables]
[poro]
type = MooseVariableFVReal
[]
[perm_x]
type = MooseVariableFVReal
[]
[perm_y]
type = MooseVariableFVReal
[]
[perm_z]
type = MooseVariableFVReal
[]
[]
[AuxKernels]
[poro]
type = ADPorousFlowPropertyAux
property = porosity
variable = poro
[]
[perm_x]
type = ADPorousFlowPropertyAux
property = permeability
variable = perm_x
row = 0
column = 0
[]
[perm_y]
type = ADPorousFlowPropertyAux
property = permeability
variable = perm_y
row = 1
column = 1
[]
[perm_z]
type = ADPorousFlowPropertyAux
property = permeability
variable = perm_z
row = 2
column = 2
[]
[]
[Postprocessors]
[perm_x_bottom]
type = PointValue
variable = perm_x
point = '0 0 0'
[]
[perm_y_bottom]
type = PointValue
variable = perm_y
point = '0 0 0'
[]
[perm_z_bottom]
type = PointValue
variable = perm_z
point = '0 0 0'
[]
[perm_x_top]
type = PointValue
variable = perm_x
point = '3 0 0'
[]
[perm_y_top]
type = PointValue
variable = perm_y
point = '3 0 0'
[]
[perm_z_top]
type = PointValue
variable = perm_z
point = '3 0 0'
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
# unimportant in this fully-saturated test
m = 0.8
alpha = 1e-4
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2.2e9
viscosity = 1e-3
density0 = 1000
thermal_expansion = 0
[]
[]
[Materials]
[permeability]
type = ADPorousFlowPermeabilityKozenyCarman
k_anisotropy = '1 0 0 0 2 0 0 0 0.1'
poroperm_function = kozeny_carman_fd2
f = 0.1
d = 5
m = 2
n = 7
[]
[temperature]
type = ADPorousFlowTemperature
[]
[massfrac]
type = ADPorousFlowMassFraction
[]
[eff_fluid_pressure]
type = ADPorousFlowEffectiveFluidPressure
[]
[ppss]
type = ADPorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[simple_fluid]
type = ADPorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = ADPorousFlowPorosityConst
porosity = 0.1
[]
[relperm]
type = ADPorousFlowRelativePermeabilityCorey
n = 0 # unimportant in this fully-saturated situation
phase = 0
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
solve_type = Newton
type = Steady
l_tol = 1E-5
nl_abs_tol = 1E-3
nl_rel_tol = 1E-8
l_max_its = 200
nl_max_its = 400
[]
[Outputs]
file_base = 'PermFromPoro01_out'
csv = true
execute_on = 'timestep_end'
[]
(modules/porous_flow/test/tests/jacobian/fflux04.i)
# 2phase (PP), 3components (that exist in both phases), constant viscosity, constant insitu permeability
# density with constant bulk, Corey relative perm, nonzero gravity, unsaturated with vanGenuchten
[Mesh]
type = GeneratedMesh
dim = 2
nx = 2
xmin = 0
xmax = 1
ny = 1
ymin = 0
ymax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[ppwater]
[]
[ppgas]
[]
[massfrac_ph0_sp0]
[]
[]
[AuxVariables]
[massfrac_ph0_sp1]
[]
[massfrac_ph1_sp0]
[]
[massfrac_ph1_sp1]
[]
[]
[ICs]
[ppwater]
type = RandomIC
variable = ppwater
min = -1
max = 0
[]
[ppgas]
type = RandomIC
variable = ppgas
min = 0
max = 1
[]
[massfrac_ph0_sp0]
type = RandomIC
variable = massfrac_ph0_sp0
min = 0
max = 0.4
[]
[massfrac_ph0_sp1]
type = RandomIC
variable = massfrac_ph0_sp1
min = 0
max = 0.4
[]
[massfrac_ph1_sp0]
type = RandomIC
variable = massfrac_ph1_sp0
min = 0
max = 0.4
[]
[massfrac_ph1_sp1]
type = RandomIC
variable = massfrac_ph1_sp1
min = 0
max = 0.4
[]
[]
[Kernels]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = ppwater
gravity = '-1 -0.1 0'
[]
[flux1]
type = PorousFlowAdvectiveFlux
fluid_component = 1
variable = ppgas
gravity = '-1 -0.1 0'
[]
[flux2]
type = PorousFlowAdvectiveFlux
fluid_component = 2
variable = massfrac_ph0_sp0
gravity = '-1 -0.1 0'
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'ppwater ppgas massfrac_ph0_sp0'
number_fluid_phases = 2
number_fluid_components = 3
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 1.5
density0 = 1
thermal_expansion = 0
viscosity = 1
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 0.5
density0 = 0.5
thermal_expansion = 0
viscosity = 1
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePP
phase0_porepressure = ppwater
phase1_porepressure = ppgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph0_sp1 massfrac_ph1_sp0 massfrac_ph1_sp1'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 2 0 0 0 3'
[]
[relperm0]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[relperm1]
type = PorousFlowRelativePermeabilityCorey
n = 3
phase = 1
[]
[]
[Preconditioning]
active = check
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000'
[]
[check]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -snes_type'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000 test'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
[Outputs]
exodus = false
[]
(modules/porous_flow/test/tests/poroperm/PermTensorFromVar03.i)
# Testing permeability calculated from scalar and tensor
# Trivial test, checking calculated permeability is correct
# when k_anisotropy is not specified.
# k = k_anisotropy * perm
[Mesh]
type = GeneratedMesh
dim = 1
nx = 3
xmin = 0
xmax = 3
[]
[GlobalParams]
block = 0
PorousFlowDictator = dictator
[]
[Variables]
[pp]
[InitialCondition]
type = ConstantIC
value = 0
[]
[]
[]
[Kernels]
[flux]
type = PorousFlowAdvectiveFlux
gravity = '0 0 0'
variable = pp
[]
[]
[BCs]
[ptop]
type = DirichletBC
variable = pp
boundary = right
value = 0
[]
[pbase]
type = DirichletBC
variable = pp
boundary = left
value = 1
[]
[]
[AuxVariables]
[perm_var]
order = CONSTANT
family = MONOMIAL
[]
[perm_x]
order = CONSTANT
family = MONOMIAL
[]
[perm_y]
order = CONSTANT
family = MONOMIAL
[]
[perm_z]
order = CONSTANT
family = MONOMIAL
[]
[]
[AuxKernels]
[perm_var]
type = ConstantAux
value = 2
variable = perm_var
[]
[perm_x]
type = PorousFlowPropertyAux
property = permeability
variable = perm_x
row = 0
column = 0
[]
[perm_y]
type = PorousFlowPropertyAux
property = permeability
variable = perm_y
row = 1
column = 1
[]
[perm_z]
type = PorousFlowPropertyAux
property = permeability
variable = perm_z
row = 2
column = 2
[]
[]
[Postprocessors]
[perm_x_left]
type = PointValue
variable = perm_x
point = '0.5 0 0'
[]
[perm_y_left]
type = PointValue
variable = perm_y
point = '0.5 0 0'
[]
[perm_z_left]
type = PointValue
variable = perm_z
point = '0.5 0 0'
[]
[perm_x_right]
type = PointValue
variable = perm_x
point = '2.5 0 0'
[]
[perm_y_right]
type = PointValue
variable = perm_y
point = '2.5 0 0'
[]
[perm_z_right]
type = PointValue
variable = perm_z
point = '2.5 0 0'
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
# unimportant in this fully-saturated test
m = 0.8
alpha = 1e-4
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
[]
[]
[Materials]
[permeability]
type = PorousFlowPermeabilityTensorFromVar
perm = perm_var
[]
[temperature]
type = PorousFlowTemperature
[]
[massfrac]
type = PorousFlowMassFraction
[]
[eff_fluid_pressure]
type = PorousFlowEffectiveFluidPressure
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosity
porosity_zero = 0.1
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 0 # unimportant in this fully-saturated situation
phase = 0
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
[]
[]
[Executioner]
solve_type = Newton
type = Steady
l_tol = 1E-5
nl_abs_tol = 1E-3
nl_rel_tol = 1E-8
l_max_its = 200
nl_max_its = 400
petsc_options_iname = '-pc_type -pc_asm_overlap -sub_pc_type -ksp_type -ksp_gmres_restart'
petsc_options_value = ' asm 2 lu gmres 200'
[]
[Outputs]
csv = true
execute_on = 'timestep_end'
[]
(modules/porous_flow/test/tests/jacobian/line_sink03.i)
# PorousFlowPeacemanBorehole with 2-phase, 3-components, with enthalpy, internal_energy, and thermal_conductivity
# NOTE: this test has suffered from repeated failures since its inception. The problem always appears to be caused by having too many Dirac points in an element: see #10471. As of Nov2020, the dirac7 DiracKernel uses only one Dirac point, not ten_points.bh. One day it would be good to be able to use point_file = ten_points.bh
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 1
xmin = -1
xmax = 1
ymin = -1
ymax = 1
zmin = -1
zmax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[ppwater]
[]
[ppgas]
[]
[massfrac_ph0_sp0]
[]
[massfrac_ph0_sp1]
[]
[massfrac_ph1_sp0]
[]
[massfrac_ph1_sp1]
[]
[temp]
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'temp ppwater ppgas massfrac_ph0_sp0 massfrac_ph0_sp1 massfrac_ph1_sp0 massfrac_ph1_sp1'
number_fluid_phases = 2
number_fluid_components = 3
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[dummy_outflow0]
type = PorousFlowSumQuantity
[]
[dummy_outflow1]
type = PorousFlowSumQuantity
[]
[dummy_outflow2]
type = PorousFlowSumQuantity
[]
[dummy_outflow3]
type = PorousFlowSumQuantity
[]
[dummy_outflow4]
type = PorousFlowSumQuantity
[]
[dummy_outflow5]
type = PorousFlowSumQuantity
[]
[dummy_outflow6]
type = PorousFlowSumQuantity
[]
[dummy_outflow7]
type = PorousFlowSumQuantity
[]
[]
[ICs]
[temp]
type = RandomIC
variable = temp
min = 1
max = 2
[]
[ppwater]
type = RandomIC
variable = ppwater
min = -1
max = 0
[]
[ppgas]
type = RandomIC
variable = ppgas
min = 0
max = 1
[]
[massfrac_ph0_sp0]
type = RandomIC
variable = massfrac_ph0_sp0
min = 0
max = 1
[]
[massfrac_ph0_sp1]
type = RandomIC
variable = massfrac_ph0_sp1
min = 0
max = 1
[]
[massfrac_ph1_sp0]
type = RandomIC
variable = massfrac_ph1_sp0
min = 0
max = 1
[]
[massfrac_ph1_sp1]
type = RandomIC
variable = massfrac_ph1_sp1
min = 0
max = 1
[]
[]
[Kernels]
[dummy_temp]
type = TimeDerivative
variable = temp
[]
[dummy_ppwater]
type = TimeDerivative
variable = ppwater
[]
[dummy_ppgas]
type = TimeDerivative
variable = ppgas
[]
[dummy_m00]
type = TimeDerivative
variable = massfrac_ph0_sp0
[]
[dummy_m01]
type = TimeDerivative
variable = massfrac_ph0_sp1
[]
[dummy_m10]
type = TimeDerivative
variable = massfrac_ph1_sp0
[]
[dummy_m11]
type = TimeDerivative
variable = massfrac_ph1_sp1
[]
[]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 1.5
density0 = 1
thermal_expansion = 0
viscosity = 1
cv = 1.1
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 0.5
density0 = 0.5
thermal_expansion = 0
viscosity = 1.4
cv = 1.8
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = temp
[]
[ppss]
type = PorousFlow2PhasePP
phase0_porepressure = ppwater
phase1_porepressure = ppgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph0_sp1 massfrac_ph1_sp0 massfrac_ph1_sp1'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 2 0 0 0 3'
[]
[relperm0]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[relperm1]
type = PorousFlowRelativePermeabilityCorey
n = 3
phase = 1
[]
[thermal_conductivity]
type = PorousFlowThermalConductivityIdeal
dry_thermal_conductivity = '0.1 0.02 0.03 0.02 0.0 0.01 0.03 0.01 0.3'
[]
[]
[DiracKernels]
#active = 'dirac6 dirac2' # incorrect jacobian for ny=2
#active = 'dirac0 dirac1 dirac2 dirac3 dirac4 dirac5' # correct jacobian for ny=2
#active = 'dirac0 dirac1 dirac2 dirac3 dirac4 dirac5 dirac6' # incorrect jacobian for ny=2
#active = 'dirac0 dirac1 dirac2 dirac3 dirac4 dirac5 dirac7' # correct jacobian in dbg, but not in opt, for ny=2
#active = 'dirac0 dirac1 dirac2 dirac3 dirac4 dirac5 dirac6' # incorrect jacobian in dbg, but correct for opt, for ny=1
#active = 'dirac0 dirac1 dirac2 dirac3 dirac4 dirac5' # correct jacobian, for ny=1
#active = 'dirac0 dirac1 dirac2 dirac3 dirac4 dirac5 dirac6' # incorrect jacobian in dbg, but correct for opt, for ny=1. row24, col 21 and 22 are wrong. row24=node3, 21=ppwater, 22=ppgas, 24=massfrac_ph0_sp1 (all at node3)
[dirac0]
type = PorousFlowPeacemanBorehole
fluid_phase = 0
variable = ppwater
point_file = one_point.bh
line_length = 1
SumQuantityUO = dummy_outflow0
character = 1
bottom_p_or_t = -10
unit_weight = '1 2 3'
re_constant = 0.123
[]
[dirac1]
type = PorousFlowPeacemanBorehole
fluid_phase = 1
variable = ppgas
line_length = 1
line_direction = '-1 -1 -1'
use_relative_permeability = true
point_file = one_point.bh
SumQuantityUO = dummy_outflow1
character = -0.5
bottom_p_or_t = 10
unit_weight = '1 2 -3'
re_constant = 0.3
[]
[dirac2]
type = PorousFlowPeacemanBorehole
fluid_phase = 0
variable = massfrac_ph0_sp0
line_length = 1.3
line_direction = '1 0 1'
use_mobility = true
point_file = one_point.bh
SumQuantityUO = dummy_outflow2
character = 0.6
bottom_p_or_t = -4
unit_weight = '-1 -2 -3'
re_constant = 0.4
[]
[dirac3]
type = PorousFlowPeacemanBorehole
fluid_phase = 0
variable = massfrac_ph0_sp1
line_length = 1.3
line_direction = '1 1 1'
use_enthalpy = true
mass_fraction_component = 0
point_file = one_point.bh
SumQuantityUO = dummy_outflow3
character = -1
bottom_p_or_t = 3
unit_weight = '0.1 0.2 0.3'
re_constant = 0.5
[]
[dirac4]
type = PorousFlowPeacemanBorehole
fluid_phase = 1
variable = massfrac_ph1_sp0
function_of = temperature
line_length = 0.9
line_direction = '1 1 1'
mass_fraction_component = 1
use_internal_energy = true
point_file = one_point.bh
SumQuantityUO = dummy_outflow4
character = 1.1
bottom_p_or_t = -7
unit_weight = '-1 2 3'
re_constant = 0.6
[]
[dirac5]
type = PorousFlowPeacemanBorehole
fluid_phase = 1
variable = temp
line_length = 0.9
function_of = temperature
line_direction = '1 2 3'
mass_fraction_component = 2
use_internal_energy = true
point_file = one_point.bh
SumQuantityUO = dummy_outflow5
character = 0.9
bottom_p_or_t = -8
unit_weight = '1 2 1'
re_constant = 0.7
[]
[dirac6]
type = PorousFlowPeacemanBorehole
fluid_phase = 0
variable = ppwater
point_file = nine_points.bh
SumQuantityUO = dummy_outflow6
character = 0
bottom_p_or_t = 10
unit_weight = '0.0 0.0 0.0'
[]
[dirac7]
type = PorousFlowPeacemanBorehole
fluid_phase = 1
variable = massfrac_ph0_sp0
use_mobility = true
mass_fraction_component = 1
use_relative_permeability = true
use_internal_energy = true
point_file = one_point.bh
#NOTE this commented-out line: point_file = ten_points.bh
SumQuantityUO = dummy_outflow7
character = -1
bottom_p_or_t = 10
unit_weight = '0.1 0.2 0.3'
[]
[]
[Preconditioning]
[check]
type = SMP
full = true
#petsc_options = '-snes_test_display'
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -snes_type'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000 test'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
[Outputs]
file_base = line_sink03
[]
(modules/porous_flow/test/tests/aux_kernels/darcy_velocity_lower_2D.i)
# checking that the PorousFlowDarcyVelocityComponentLowerDimensional AuxKernel works as expected in 1D+2D situation
# for the fully-saturated case (relative-permeability = 1)
# The 1_frac_in_2D_example.e has size 0.3x0.2x0, and a fracture running through its
# centre, with normal = (0, 1, 0)
# Porepressure is initialised to grad(P) = (1, 2, 0)
# Fluid_density = 2
# viscosity = 10
# relative_permeability = 1
# permeability = (5, 5, 5) (in the bulk, measured in m^2)
# permeability = (10, 10, 10) (in the fracture, measured in m^3)
# aperture = 0.01
# gravity = (1, 0.5, 0)
# So Darcy velocity in the bulk = (0.5, -0.5, 0)
# in the fracture grad(P) = (1, 0, 0)
# In the fracture the projected gravity vector is
# tangential_gravity = (1, 0, 0)
# So the Darcy velocity in the fracture = (100, 0, 0)
[Mesh]
type = FileMesh
file = 1_frac_in_2D_example.e
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '1 0.5 0'
[]
[Variables]
[pp]
[]
[]
[ICs]
[pinit]
type = FunctionIC
function = 'x+2*y'
variable = pp
[]
[]
[Kernels]
[dummy]
type = TimeDerivative
variable = pp
[]
[]
[AuxVariables]
[bulk_vel_x]
order = CONSTANT
family = MONOMIAL
block = '2 3'
[]
[bulk_vel_y]
order = CONSTANT
family = MONOMIAL
block = '2 3'
[]
[bulk_vel_z]
order = CONSTANT
family = MONOMIAL
block = '2 3'
[]
[fracture_vel_x]
order = CONSTANT
family = MONOMIAL
block = 1
[]
[fracture_vel_y]
order = CONSTANT
family = MONOMIAL
block = 1
[]
[fracture_vel_z]
order = CONSTANT
family = MONOMIAL
block = 1
[]
[]
[AuxKernels]
[bulk_vel_x]
type = PorousFlowDarcyVelocityComponent
variable = bulk_vel_x
component = x
fluid_phase = 0
[]
[bulk_vel_y]
type = PorousFlowDarcyVelocityComponent
variable = bulk_vel_y
component = y
fluid_phase = 0
[]
[bulk_vel_z]
type = PorousFlowDarcyVelocityComponent
variable = bulk_vel_z
component = z
fluid_phase = 0
[]
[fracture_vel_x]
type = PorousFlowDarcyVelocityComponentLowerDimensional
variable = fracture_vel_x
component = x
fluid_phase = 0
aperture = 0.01
[]
[fracture_vel_y]
type = PorousFlowDarcyVelocityComponentLowerDimensional
variable = fracture_vel_y
component = y
fluid_phase = 0
aperture = 0.01
[]
[fracture_vel_z]
type = PorousFlowDarcyVelocityComponentLowerDimensional
variable = fracture_vel_z
component = z
fluid_phase = 0
aperture = 0.01
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureConst
pc = 0
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1E16
viscosity = 10
density0 = 2
thermal_expansion = 0
[]
[]
[Postprocessors]
[bulk_vel_x]
type = PointValue
variable = bulk_vel_x
point = '0 -0.05 0'
[]
[bulk_vel_y]
type = PointValue
variable = bulk_vel_y
point = '0 -0.05 0'
[]
[bulk_vel_z]
type = PointValue
variable = bulk_vel_z
point = '0 -0.05 0'
[]
[fracture_vel_x]
type = PointValue
point = '0 0 0'
variable = fracture_vel_x
[]
[fracture_vel_y]
type = PointValue
point = '0 0 0'
variable = fracture_vel_y
[]
[fracture_vel_z]
type = PointValue
point = '0 0 0'
variable = fracture_vel_z
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '5 0 0 0 5 0 0 0 5'
block = '2 3'
[]
[permeability_fracture]
type = PorousFlowPermeabilityConst
permeability = '10 0 0 0 10 0 0 0 10'
block = 1
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[]
[Executioner]
type = Transient
dt = 1
end_time = 1
[]
[Outputs]
csv = true
[]
(modules/porous_flow/test/tests/relperm/corey3.i)
# Test Corey relative permeability curve by varying saturation over the mesh
# Residual saturation of phase 0: s0r = 0.2
# Residual saturation of phase 1: s1r = 0.3
[Mesh]
type = GeneratedMesh
dim = 1
nx = 20
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[p0]
initial_condition = 1e6
[]
[s1]
family = LAGRANGE
order = FIRST
[]
[]
[AuxVariables]
[s0aux]
family = MONOMIAL
order = CONSTANT
[]
[s1aux]
family = MONOMIAL
order = CONSTANT
[]
[kr0aux]
family = MONOMIAL
order = CONSTANT
[]
[kr1aux]
family = MONOMIAL
order = CONSTANT
[]
[]
[AuxKernels]
[s0]
type = PorousFlowPropertyAux
property = saturation
phase = 0
variable = s0aux
[]
[s1]
type = PorousFlowPropertyAux
property = saturation
phase = 1
variable = s1aux
[]
[kr0]
type = PorousFlowPropertyAux
property = relperm
phase = 0
variable = kr0aux
[]
[kr1]
type = PorousFlowPropertyAux
property = relperm
phase = 1
variable = kr1aux
[]
[]
[Functions]
[s1]
type = ParsedFunction
expression = x
[]
[]
[ICs]
[s1]
type = FunctionIC
variable = s1
function = s1
[]
[]
[Kernels]
[p0]
type = Diffusion
variable = p0
[]
[s1]
type = Diffusion
variable = s1
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'p0 s1'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureConst
pc = 0
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePS
phase0_porepressure = p0
phase1_saturation = s1
capillary_pressure = pc
[]
[kr0]
type = PorousFlowRelativePermeabilityCorey
phase = 0
n = 2
s_res = 0.2
sum_s_res = 0.5
[]
[kr1]
type = PorousFlowRelativePermeabilityCorey
phase = 1
n = 2
s_res = 0.3
sum_s_res = 0.5
[]
[]
[VectorPostprocessors]
[vpp]
type = LineValueSampler
warn_discontinuous_face_values = false
variable = 's0aux s1aux kr0aux kr1aux'
start_point = '0 0 0'
end_point = '1 0 0'
num_points = 20
sort_by = id
[]
[]
[Executioner]
type = Steady
solve_type = NEWTON
nl_abs_tol = 1e-8
[]
[BCs]
[sleft]
type = DirichletBC
variable = s1
value = 0
boundary = left
[]
[sright]
type = DirichletBC
variable = s1
value = 1
boundary = right
[]
[]
[Outputs]
csv = true
execute_on = timestep_end
[]
(modules/porous_flow/test/tests/actions/addmaterials.i)
# Test that the PorousFlowAddMaterialAction correctly handles the case where
# materials are added with the default add_nodes parameter, as well as
# at_nodes = true, to make sure that the action doesn't add a duplicate material
[Mesh]
type = GeneratedMesh
dim = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[Variables]
[pwater]
initial_condition = 1e6
[]
[sgas]
initial_condition = 0.3
[]
[temperature]
initial_condition = 50
[]
[]
[AuxVariables]
[x0]
initial_condition = 0.1
[]
[x1]
initial_condition = 0.5
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pwater
[]
[mass1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = sgas
[]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = pwater
[]
[flux1]
type = PorousFlowAdvectiveFlux
fluid_component = 1
variable = sgas
[]
[energy_dot]
type = PorousFlowEnergyTimeDerivative
variable = temperature
[]
[heat_advection]
type = PorousFlowHeatAdvection
variable = temperature
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pwater sgas temperature'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1e-5
pc_max = 1e7
sat_lr = 0.1
[]
[]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 1e9
viscosity = 1e-3
density0 = 1000
thermal_expansion = 0
cv = 2
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 1e9
viscosity = 1e-4
density0 = 20
thermal_expansion = 0
cv = 1
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = 50
[]
[temperature_nodal]
type = PorousFlowTemperature
at_nodes = true
temperature = 50
[]
[ppss]
type = PorousFlow2PhasePS
phase0_porepressure = pwater
phase1_saturation = sgas
capillary_pressure = pc
[]
[ppss_nodal]
type = PorousFlow2PhasePS
at_nodes = true
phase0_porepressure = pwater
phase1_saturation = sgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'x0 x1'
[]
[massfrac_nodal]
type = PorousFlowMassFraction
at_nodes = true
mass_fraction_vars = 'x0 x1'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid0_nodal]
type = PorousFlowSingleComponentFluid
at_nodes = true
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[simple_fluid1_nodal]
type = PorousFlowSingleComponentFluid
at_nodes = true
fp = simple_fluid1
phase = 1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-12 0 0 0 1e-12 0 0 0 1e-12'
[]
[relperm0]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
s_res = 0.1
sum_s_res = 0.11
[]
[relperm1]
type = PorousFlowRelativePermeabilityCorey
n = 3
phase = 1
s_res = 0.01
sum_s_res = 0.11
[]
[relperm0_nodal]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
at_nodes = true
[]
[relperm1_nodal]
type = PorousFlowRelativePermeabilityCorey
n = 3
phase = 1
at_nodes = true
[]
[porosity_nodal]
type = PorousFlowPorosityConst
porosity = 0.1
at_nodes = true
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[rock_heat]
type = PorousFlowMatrixInternalEnergy
specific_heat_capacity = 1.0
density = 125
[]
[unused]
type = GenericConstantMaterial
prop_names = unused
prop_values = 0
[]
[]
[Executioner]
type = Transient
end_time = 1
nl_abs_tol = 1e-14
[]
(modules/porous_flow/test/tests/gravity/grav02e.i)
# Checking that gravity head is established in the transient situation when 0<=saturation<=1 (note the less-than-or-equal-to).
# 2phase (PS), 2components, constant capillary pressure, constant fluid bulk-moduli for each phase, constant viscosity,
# constant permeability, Corey relative permeabilities with no residual saturation
[Mesh]
type = GeneratedMesh
dim = 2
ny = 10
ymax = 100
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 -10 0'
[]
[Variables]
[ppwater]
initial_condition = 1.5e6
[]
[sgas]
initial_condition = 0.3
[]
[]
[AuxVariables]
[massfrac_ph0_sp0]
initial_condition = 1
[]
[massfrac_ph1_sp0]
initial_condition = 0
[]
[ppgas]
family = MONOMIAL
order = FIRST
[]
[swater]
family = MONOMIAL
order = FIRST
[]
[relpermwater]
family = MONOMIAL
order = FIRST
[]
[relpermgas]
family = MONOMIAL
order = FIRST
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = ppwater
[]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = ppwater
[]
[mass1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = sgas
[]
[flux1]
type = PorousFlowAdvectiveFlux
fluid_component = 1
variable = sgas
[]
[]
[AuxKernels]
[ppgas]
type = PorousFlowPropertyAux
property = pressure
phase = 1
variable = ppgas
[]
[swater]
type = PorousFlowPropertyAux
property = saturation
phase = 0
variable = swater
[]
[relpermwater]
type = PorousFlowPropertyAux
property = relperm
phase = 0
variable = relpermwater
[]
[relpermgas]
type = PorousFlowPropertyAux
property = relperm
phase = 1
variable = relpermgas
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'ppwater sgas'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureConst
pc = 1e5
[]
[]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 2e9
density0 = 1000
viscosity = 1e-3
thermal_expansion = 0
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 2e9
density0 = 10
viscosity = 1e-5
thermal_expansion = 0
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePS
phase0_porepressure = ppwater
phase1_saturation = sgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph1_sp0'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-11 0 0 0 1e-11 0 0 0 1e-11'
[]
[relperm_water]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[relperm_gas]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 1
[]
[]
[Postprocessors]
[mass_ph0]
type = PorousFlowFluidMass
fluid_component = 0
execute_on = 'initial timestep_end'
[]
[mass_ph1]
type = PorousFlowFluidMass
fluid_component = 1
execute_on = 'initial timestep_end'
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol'
petsc_options_value = 'bcgs bjacobi 1E-12 1E-10'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
end_time = 1e5
[TimeStepper]
type = IterationAdaptiveDT
dt = 1e4
[]
[]
[Outputs]
execute_on = 'initial timestep_end'
file_base = grav02e
exodus = true
perf_graph = true
csv = false
[]
(modules/porous_flow/test/tests/dirackernels/theis3.i)
# Two phase Theis problem: Flow from single source
# Constant rate injection 0.5 kg/s
# 1D cylindrical mesh
[Mesh]
type = GeneratedMesh
dim = 1
nx = 100
xmax = 2000
bias_x = 1.05
coord_type = RZ
rz_coord_axis = Y
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[Variables]
[ppwater]
initial_condition = 20e6
[]
[sgas]
initial_condition = 0
[]
[]
[AuxVariables]
[massfrac_ph0_sp0]
initial_condition = 1
[]
[massfrac_ph1_sp0]
initial_condition = 0
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = ppwater
[]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = ppwater
[]
[mass1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = sgas
[]
[flux1]
type = PorousFlowAdvectiveFlux
fluid_component = 1
variable = sgas
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'ppwater sgas'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureConst
pc = 1e5
[]
[]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 2e9
density0 = 1000
viscosity = 1e-3
thermal_expansion = 0
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 2e9
density0 = 10
viscosity = 1e-4
thermal_expansion = 0
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePS
phase0_porepressure = ppwater
phase1_saturation = sgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph1_sp0'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
compute_enthalpy = false
compute_internal_energy = false
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
compute_enthalpy = false
compute_internal_energy = false
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.2
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-12 0 0 0 1e-12 0 0 0 1e-12'
[]
[relperm_water]
type = PorousFlowRelativePermeabilityCorey
n = 1
phase = 0
[]
[relperm_gas]
type = PorousFlowRelativePermeabilityCorey
n = 1
phase = 1
[]
[]
[BCs]
[rightwater]
type = DirichletBC
boundary = right
value = 20e6
variable = ppwater
[]
[]
[DiracKernels]
[source]
type = PorousFlowSquarePulsePointSource
point = '0 0 0'
mass_flux = 0.5
variable = sgas
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
petsc_options = '-snes_converged_reason -ksp_diagonal_scale -ksp_diagonal_scale_fix -ksp_gmres_modifiedgramschmidt -snes_linesearch_monitor'
petsc_options_iname = '-ksp_type -pc_type -sub_pc_type -sub_pc_factor_shift_type -pc_asm_overlap -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'gmres asm lu NONZERO 2 1E-8 1E-10 20'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
end_time = 1e4
[TimeStepper]
type = IterationAdaptiveDT
dt = 10
growth_factor = 2
[]
[]
[VectorPostprocessors]
[line]
type = NodalValueSampler
sort_by = x
variable = 'ppwater sgas'
execute_on = 'timestep_end'
[]
[]
[Postprocessors]
[ppwater]
type = PointValue
point = '4 0 0'
variable = ppwater
[]
[sgas]
type = PointValue
point = '4 0 0'
variable = sgas
[]
[massgas]
type = PorousFlowFluidMass
fluid_component = 1
[]
[]
[Outputs]
file_base = theis3
print_linear_residuals = false
perf_graph = true
[csv]
type = CSV
execute_on = timestep_end
execute_vector_postprocessors_on = final
[]
[]
(modules/porous_flow/test/tests/relperm/corey2.i)
# Test Corey relative permeability curve by varying saturation over the mesh
# Corey exponent n = 2 for both phases
# No residual saturation in either phase
[Mesh]
type = GeneratedMesh
dim = 1
nx = 20
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[p0]
initial_condition = 1e6
[]
[s1]
family = LAGRANGE
order = FIRST
[]
[]
[AuxVariables]
[s0aux]
family = MONOMIAL
order = CONSTANT
[]
[s1aux]
family = MONOMIAL
order = CONSTANT
[]
[kr0aux]
family = MONOMIAL
order = CONSTANT
[]
[kr1aux]
family = MONOMIAL
order = CONSTANT
[]
[]
[AuxKernels]
[s0]
type = PorousFlowPropertyAux
property = saturation
phase = 0
variable = s0aux
[]
[s1]
type = PorousFlowPropertyAux
property = saturation
phase = 1
variable = s1aux
[]
[kr0]
type = PorousFlowPropertyAux
property = relperm
phase = 0
variable = kr0aux
[]
[kr1]
type = PorousFlowPropertyAux
property = relperm
phase = 1
variable = kr1aux
[]
[]
[Functions]
[s1]
type = ParsedFunction
expression = x
[]
[]
[ICs]
[s1]
type = FunctionIC
variable = s1
function = s1
[]
[]
[Kernels]
[p0]
type = Diffusion
variable = p0
[]
[s1]
type = Diffusion
variable = s1
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'p0 s1'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureConst
pc = 0
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePS
phase0_porepressure = p0
phase1_saturation = s1
capillary_pressure = pc
[]
[kr0]
type = PorousFlowRelativePermeabilityCorey
phase = 0
n = 2
[]
[kr1]
type = PorousFlowRelativePermeabilityCorey
phase = 1
n = 2
[]
[]
[VectorPostprocessors]
[vpp]
type = LineValueSampler
warn_discontinuous_face_values = false
variable = 's0aux s1aux kr0aux kr1aux'
start_point = '0 0 0'
end_point = '1 0 0'
num_points = 20
sort_by = id
[]
[]
[Executioner]
type = Steady
solve_type = NEWTON
nl_abs_tol = 1e-8
[]
[BCs]
[sleft]
type = DirichletBC
variable = s1
value = 0
boundary = left
[]
[sright]
type = DirichletBC
variable = s1
value = 1
boundary = right
[]
[]
[Outputs]
csv = true
execute_on = timestep_end
[]
(modules/porous_flow/test/tests/jacobian/fflux06.i)
# 1phase with MD_Gaussian (var = log(mass-density) with Gaussian capillary) formulation
# constant viscosity, constant insitu permeability
# density with constant bulk, Corey relative perm, nonzero gravity
# unsaturated
[Mesh]
type = GeneratedMesh
dim = 2
nx = 2
xmin = 0
xmax = 1
ny = 1
ymin = 0
ymax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[md]
[]
[]
[ICs]
[md]
type = RandomIC
min = -1
max = -0.224 # unsaturated for md<log(density_P0=0.8)=-0.223
variable = md
[]
[]
[Kernels]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = md
gravity = '-1 -0.1 0'
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'md'
number_fluid_phases = 1
number_fluid_components = 1
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1.5
density0 = 1
thermal_expansion = 0
viscosity = 1
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseMD_Gaussian
mass_density = md
al = 1.1
density_P0 = 0.8
bulk_modulus = 1.5
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 2 0 0 0 3'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[]
[Preconditioning]
active = check
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000'
[]
[check]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -snes_type'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000 test'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
[Outputs]
exodus = false
[]
(modules/porous_flow/test/tests/fluidstate/brineco2.i)
# Tests correct calculation of properties in PorousFlowBrineCO2
[Mesh]
[mesh]
type = GeneratedMeshGenerator
dim = 2
[]
[]
[GlobalParams]
PorousFlowDictator = dictator
temperature = 30
[]
[Variables]
[pgas]
initial_condition = 20e6
[]
[z]
initial_condition = 0.2
[]
[]
[AuxVariables]
[xnacl]
initial_condition = 0.1
[]
[pressure_gas]
order = CONSTANT
family = MONOMIAL
[]
[pressure_water]
order = CONSTANT
family = MONOMIAL
[]
[saturation_gas]
order = CONSTANT
family = MONOMIAL
[]
[saturation_water]
order = CONSTANT
family = MONOMIAL
[]
[density_water]
order = CONSTANT
family = MONOMIAL
[]
[density_gas]
order = CONSTANT
family = MONOMIAL
[]
[viscosity_water]
order = CONSTANT
family = MONOMIAL
[]
[viscosity_gas]
order = CONSTANT
family = MONOMIAL
[]
[enthalpy_water]
order = CONSTANT
family = MONOMIAL
[]
[enthalpy_gas]
order = CONSTANT
family = MONOMIAL
[]
[internal_energy_water]
order = CONSTANT
family = MONOMIAL
[]
[internal_energy_gas]
order = CONSTANT
family = MONOMIAL
[]
[x0_water]
order = CONSTANT
family = MONOMIAL
[]
[x0_gas]
order = CONSTANT
family = MONOMIAL
[]
[x1_water]
order = CONSTANT
family = MONOMIAL
[]
[x1_gas]
order = CONSTANT
family = MONOMIAL
[]
[]
[AuxKernels]
[pressure_water]
type = PorousFlowPropertyAux
variable = pressure_water
property = pressure
phase = 0
execute_on = timestep_end
[]
[pressure_gas]
type = PorousFlowPropertyAux
variable = pressure_gas
property = pressure
phase = 1
execute_on = timestep_end
[]
[saturation_water]
type = PorousFlowPropertyAux
variable = saturation_water
property = saturation
phase = 0
execute_on = timestep_end
[]
[saturation_gas]
type = PorousFlowPropertyAux
variable = saturation_gas
property = saturation
phase = 1
execute_on = timestep_end
[]
[density_water]
type = PorousFlowPropertyAux
variable = density_water
property = density
phase = 0
execute_on = timestep_end
[]
[density_gas]
type = PorousFlowPropertyAux
variable = density_gas
property = density
phase = 1
execute_on = timestep_end
[]
[viscosity_water]
type = PorousFlowPropertyAux
variable = viscosity_water
property = viscosity
phase = 0
execute_on = timestep_end
[]
[viscosity_gas]
type = PorousFlowPropertyAux
variable = viscosity_gas
property = viscosity
phase = 1
execute_on = timestep_end
[]
[enthalpy_water]
type = PorousFlowPropertyAux
variable = enthalpy_water
property = enthalpy
phase = 0
execute_on = timestep_end
[]
[enthalpy_gas]
type = PorousFlowPropertyAux
variable = enthalpy_gas
property = enthalpy
phase = 1
execute_on = timestep_end
[]
[internal_energy_water]
type = PorousFlowPropertyAux
variable = internal_energy_water
property = internal_energy
phase = 0
execute_on = timestep_end
[]
[internal_energy_gas]
type = PorousFlowPropertyAux
variable = internal_energy_gas
property = internal_energy
phase = 1
execute_on = timestep_end
[]
[x1_water]
type = PorousFlowPropertyAux
variable = x1_water
property = mass_fraction
phase = 0
fluid_component = 1
execute_on = timestep_end
[]
[x1_gas]
type = PorousFlowPropertyAux
variable = x1_gas
property = mass_fraction
phase = 1
fluid_component = 1
execute_on = timestep_end
[]
[x0_water]
type = PorousFlowPropertyAux
variable = x0_water
property = mass_fraction
phase = 0
fluid_component = 0
execute_on = timestep_end
[]
[x0_gas]
type = PorousFlowPropertyAux
variable = x0_gas
property = mass_fraction
phase = 1
fluid_component = 0
execute_on = timestep_end
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
variable = pgas
fluid_component = 0
[]
[mass1]
type = PorousFlowMassTimeDerivative
variable = z
fluid_component = 1
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pgas z'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureConst
pc = 0
[]
[fs]
type = PorousFlowBrineCO2
brine_fp = brine
co2_fp = co2
capillary_pressure = pc
[]
[]
[FluidProperties]
[co2]
type = CO2FluidProperties
[]
[brine]
type = BrineFluidProperties
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[brineco2]
type = PorousFlowFluidState
gas_porepressure = pgas
z = z
temperature_unit = Celsius
xnacl = xnacl
capillary_pressure = pc
fluid_state = fs
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-12 0 0 0 1e-12 0 0 0 1e-12'
[]
[relperm0]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[relperm1]
type = PorousFlowRelativePermeabilityCorey
n = 3
phase = 1
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[]
[Executioner]
type = Transient
solve_type = NEWTON
dt = 1
end_time = 1
nl_abs_tol = 1e-12
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Postprocessors]
[density_water]
type = ElementIntegralVariablePostprocessor
variable = density_water
[]
[density_gas]
type = ElementIntegralVariablePostprocessor
variable = density_gas
[]
[viscosity_water]
type = ElementIntegralVariablePostprocessor
variable = viscosity_water
[]
[viscosity_gas]
type = ElementIntegralVariablePostprocessor
variable = viscosity_gas
[]
[enthalpy_water]
type = ElementIntegralVariablePostprocessor
variable = enthalpy_water
[]
[enthalpy_gas]
type = ElementIntegralVariablePostprocessor
variable = enthalpy_gas
[]
[internal_energy_water]
type = ElementIntegralVariablePostprocessor
variable = internal_energy_water
[]
[internal_energy_gas]
type = ElementIntegralVariablePostprocessor
variable = internal_energy_gas
[]
[x1_water]
type = ElementIntegralVariablePostprocessor
variable = x1_water
[]
[x0_water]
type = ElementIntegralVariablePostprocessor
variable = x0_water
[]
[x1_gas]
type = ElementIntegralVariablePostprocessor
variable = x1_gas
[]
[x0_gas]
type = ElementIntegralVariablePostprocessor
variable = x0_gas
[]
[sg]
type = ElementIntegralVariablePostprocessor
variable = saturation_gas
[]
[sw]
type = ElementIntegralVariablePostprocessor
variable = saturation_water
[]
[pwater]
type = ElementIntegralVariablePostprocessor
variable = pressure_water
[]
[pgas]
type = ElementIntegralVariablePostprocessor
variable = pressure_gas
[]
[x0mass]
type = PorousFlowFluidMass
fluid_component = 0
phase = '0 1'
[]
[x1mass]
type = PorousFlowFluidMass
fluid_component = 1
phase = '0 1'
[]
[]
[Outputs]
csv = true
file_base = brineco2
execute_on = 'TIMESTEP_END'
perf_graph = false
[]
(modules/porous_flow/test/tests/fluidstate/water_vapor.i)
# Tests correct calculation of properties in PorousFlowWaterVapor in the two-phase region
[Mesh]
type = GeneratedMesh
dim = 2
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pliq]
initial_condition = 1e6
[]
[h]
initial_condition = 8e5
scaling = 1e-3
[]
[]
[AuxVariables]
[pressure_gas]
order = CONSTANT
family = MONOMIAL
[]
[pressure_water]
order = CONSTANT
family = MONOMIAL
[]
[enthalpy_gas]
order = CONSTANT
family = MONOMIAL
[]
[enthalpy_water]
order = CONSTANT
family = MONOMIAL
[]
[saturation_gas]
order = CONSTANT
family = MONOMIAL
[]
[saturation_water]
order = CONSTANT
family = MONOMIAL
[]
[density_water]
order = CONSTANT
family = MONOMIAL
[]
[density_gas]
order = CONSTANT
family = MONOMIAL
[]
[viscosity_water]
order = CONSTANT
family = MONOMIAL
[]
[viscosity_gas]
order = CONSTANT
family = MONOMIAL
[]
[temperature]
order = CONSTANT
family = MONOMIAL
[]
[]
[AuxKernels]
[enthalpy_water]
type = PorousFlowPropertyAux
variable = enthalpy_water
property = enthalpy
phase = 0
execute_on = 'initial timestep_end'
[]
[enthalpy_gas]
type = PorousFlowPropertyAux
variable = enthalpy_gas
property = enthalpy
phase = 1
execute_on = 'initial timestep_end'
[]
[pressure_water]
type = PorousFlowPropertyAux
variable = pressure_water
property = pressure
phase = 0
execute_on = 'initial timestep_end'
[]
[pressure_gas]
type = PorousFlowPropertyAux
variable = pressure_gas
property = pressure
phase = 1
execute_on = 'initial timestep_end'
[]
[saturation_water]
type = PorousFlowPropertyAux
variable = saturation_water
property = saturation
phase = 0
execute_on = 'initial timestep_end'
[]
[saturation_gas]
type = PorousFlowPropertyAux
variable = saturation_gas
property = saturation
phase = 1
execute_on = 'initial timestep_end'
[]
[density_water]
type = PorousFlowPropertyAux
variable = density_water
property = density
phase = 0
execute_on = 'initial timestep_end'
[]
[density_gas]
type = PorousFlowPropertyAux
variable = density_gas
property = density
phase = 1
execute_on = 'initial timestep_end'
[]
[viscosity_water]
type = PorousFlowPropertyAux
variable = viscosity_water
property = viscosity
phase = 0
execute_on = 'initial timestep_end'
[]
[viscosity_gas]
type = PorousFlowPropertyAux
variable = viscosity_gas
property = viscosity
phase = 1
execute_on = 'initial timestep_end'
[]
[temperature]
type = PorousFlowPropertyAux
variable = temperature
property = temperature
execute_on = 'initial timestep_end'
[]
[]
[Kernels]
[mass]
type = PorousFlowMassTimeDerivative
variable = pliq
[]
[heat]
type = PorousFlowEnergyTimeDerivative
variable = h
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pliq h'
number_fluid_phases = 2
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureBC
pe = 1e5
lambda = 2
pc_max = 1e6
[]
[fs]
type = PorousFlowWaterVapor
water_fp = water
capillary_pressure = pc
[]
[]
[FluidProperties]
[water]
type = Water97FluidProperties
[]
[]
[Materials]
[watervapor]
type = PorousFlowFluidStateSingleComponent
porepressure = pliq
enthalpy = h
temperature_unit = Celsius
capillary_pressure = pc
fluid_state = fs
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-13 0 0 0 1e-13 0 0 0 1e-13'
[]
[relperm0]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[relperm1]
type = PorousFlowRelativePermeabilityCorey
n = 3
phase = 1
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[internal_energy]
type = PorousFlowMatrixInternalEnergy
density = 2500
specific_heat_capacity = 1200
[]
[]
[Executioner]
type = Transient
solve_type = NEWTON
end_time = 1
nl_abs_tol = 1e-12
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Postprocessors]
[density_water]
type = ElementAverageValue
variable = density_water
execute_on = 'initial timestep_end'
[]
[density_gas]
type = ElementAverageValue
variable = density_gas
execute_on = 'initial timestep_end'
[]
[viscosity_water]
type = ElementAverageValue
variable = viscosity_water
execute_on = 'initial timestep_end'
[]
[viscosity_gas]
type = ElementAverageValue
variable = viscosity_gas
execute_on = 'initial timestep_end'
[]
[enthalpy_water]
type = ElementAverageValue
variable = enthalpy_water
execute_on = 'initial timestep_end'
[]
[enthalpy_gas]
type = ElementAverageValue
variable = enthalpy_gas
execute_on = 'initial timestep_end'
[]
[sg]
type = ElementAverageValue
variable = saturation_gas
execute_on = 'initial timestep_end'
[]
[sw]
type = ElementAverageValue
variable = saturation_water
execute_on = 'initial timestep_end'
[]
[pwater]
type = ElementAverageValue
variable = pressure_water
execute_on = 'initial timestep_end'
[]
[pgas]
type = ElementAverageValue
variable = pressure_gas
execute_on = 'initial timestep_end'
[]
[temperature]
type = ElementAverageValue
variable = temperature
execute_on = 'initial timestep_end'
[]
[enthalpy]
type = ElementAverageValue
variable = h
execute_on = 'initial timestep_end'
[]
[liquid_mass]
type = PorousFlowFluidMass
phase = 0
execute_on = 'initial timestep_end'
[]
[vapor_mass]
type = PorousFlowFluidMass
phase = 1
execute_on = 'initial timestep_end'
[]
[]
[Outputs]
file_base = water_vapor_twophase
csv = true
[]
(modules/porous_flow/test/tests/pressure_pulse/pressure_pulse_1d_2phasePSVG.i)
# Pressure pulse in 1D with 2 phases, 2components - transient
[Mesh]
type = GeneratedMesh
dim = 1
nx = 10
xmin = 0
xmax = 100
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[Variables]
[ppwater]
initial_condition = 2e6
[]
[sgas]
initial_condition = 0.3
[]
[]
[AuxVariables]
[massfrac_ph0_sp0]
initial_condition = 1
[]
[massfrac_ph1_sp0]
initial_condition = 0
[]
[ppgas]
family = MONOMIAL
order = FIRST
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = ppwater
[]
[flux0]
type = PorousFlowAdvectiveFlux
variable = ppwater
fluid_component = 0
[]
[mass1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = sgas
[]
[flux1]
type = PorousFlowAdvectiveFlux
variable = sgas
fluid_component = 1
[]
[]
[AuxKernels]
[ppgas]
type = PorousFlowPropertyAux
property = pressure
phase = 1
variable = ppgas
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'ppwater sgas'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1e-4
sat_lr = 0.3
pc_max = 1e6
log_extension = false
[]
[]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 2e9
density0 = 1000
thermal_expansion = 0
viscosity = 1e-3
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 2e7
density0 = 1
thermal_expansion = 0
viscosity = 1e-5
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePS
phase0_porepressure = ppwater
phase1_saturation = sgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph1_sp0'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-15 0 0 0 1e-15 0 0 0 1e-15'
[]
[relperm_water]
type = PorousFlowRelativePermeabilityCorey
n = 1
phase = 0
[]
[relperm_gas]
type = PorousFlowRelativePermeabilityCorey
n = 1
phase = 1
[]
[]
[BCs]
[leftwater]
type = DirichletBC
boundary = left
value = 3e6
variable = ppwater
[]
[rightwater]
type = DirichletBC
boundary = right
value = 2e6
variable = ppwater
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-20 10000'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1e3
end_time = 1e4
[]
[VectorPostprocessors]
[pp]
type = LineValueSampler
warn_discontinuous_face_values = false
sort_by = x
variable = 'ppwater ppgas'
start_point = '0 0 0'
end_point = '100 0 0'
num_points = 11
[]
[]
[Outputs]
file_base = pressure_pulse_1d_2phasePSVG
print_linear_residuals = false
[csv]
type = CSV
execute_on = final
[]
[]
(modules/porous_flow/examples/restart/gas_injection_new_mesh.i)
# Using the results from the equilibrium run to provide the initial condition for
# porepressure, we now inject a gas phase into the brine-saturated reservoir. In this
# example, the mesh is not identical to the mesh used in gravityeq.i. Rather, it is
# generated so that it is more refined near the injection boundary and at the top of
# the model, as that is where the gas plume will be present.
#
# To use the hydrostatic pressure calculated using the gravity equilibrium run as the initial
# condition for the pressure, a SolutionUserObject is used, along with a SolutionFunction to
# interpolate the pressure from the gravity equilibrium run to the initial condition for liqiud
# porepressure in this example.
#
# Even though the gravity equilibrium is established using a 2D mesh, in this example,
# we use a mesh shifted 0.1 m to the right and rotate it about the Y axis to make a 2D radial
# model.
#
# Methane injection takes place over the surface of the hole created by rotating the mesh,
# and hence the injection area is 2 pi r h. We can calculate this using an AreaPostprocessor,
# and then use this in a ParsedFunction to calculate the injection rate so that 10 kg/s of
# methane is injected.
#
# Note: as this example uses the results from a previous simulation, gravityeq.i MUST be
# run before running this input file.
[Mesh]
type = GeneratedMesh
dim = 2
ny = 25
nx = 50
ymax = 100
xmin = 0.1
xmax = 5000
bias_x = 1.05
bias_y = 0.95
coord_type = RZ
rz_coord_axis = Y
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 -9.81 0'
temperature_unit = Celsius
[]
[Variables]
[pp_liq]
[]
[sat_gas]
initial_condition = 0
[]
[]
[ICs]
[ppliq_ic]
type = FunctionIC
variable = pp_liq
function = ppliq_ic
[]
[]
[AuxVariables]
[temperature]
initial_condition = 50
[]
[xnacl]
initial_condition = 0.1
[]
[brine_density]
family = MONOMIAL
order = CONSTANT
[]
[methane_density]
family = MONOMIAL
order = CONSTANT
[]
[massfrac_ph0_sp0]
initial_condition = 1
[]
[massfrac_ph1_sp0]
initial_condition = 0
[]
[pp_gas]
family = MONOMIAL
order = CONSTANT
[]
[sat_liq]
family = MONOMIAL
order = CONSTANT
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
variable = pp_liq
[]
[flux0]
type = PorousFlowAdvectiveFlux
variable = pp_liq
[]
[mass1]
type = PorousFlowMassTimeDerivative
variable = sat_gas
fluid_component = 1
[]
[flux1]
type = PorousFlowAdvectiveFlux
variable = sat_gas
fluid_component = 1
[]
[]
[AuxKernels]
[brine_density]
type = PorousFlowPropertyAux
property = density
variable = brine_density
execute_on = 'initial timestep_end'
[]
[methane_density]
type = PorousFlowPropertyAux
property = density
variable = methane_density
phase = 1
execute_on = 'initial timestep_end'
[]
[pp_gas]
type = PorousFlowPropertyAux
property = pressure
phase = 1
variable = pp_gas
execute_on = 'initial timestep_end'
[]
[sat_liq]
type = PorousFlowPropertyAux
property = saturation
variable = sat_liq
execute_on = 'initial timestep_end'
[]
[]
[BCs]
[gas_injection]
type = PorousFlowSink
boundary = left
variable = sat_gas
flux_function = injection_rate
fluid_phase = 1
[]
[brine_out]
type = PorousFlowPiecewiseLinearSink
boundary = right
variable = pp_liq
multipliers = '0 1e9'
pt_vals = '0 1e9'
fluid_phase = 0
flux_function = 1e-6
use_mobility = true
use_relperm = true
mass_fraction_component = 0
[]
[]
[Functions]
[injection_rate]
type = ParsedFunction
symbol_values = injection_area
symbol_names = area
expression = '-1/area'
[]
[ppliq_ic]
type = SolutionFunction
solution = soln
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp_liq sat_gas'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
alpha = 1e-5
m = 0.5
sat_lr = 0.2
pc_max = 1e7
[]
[soln]
type = SolutionUserObject
mesh = gravityeq_out.e
system_variables = porepressure
[]
[]
[FluidProperties]
[brine]
type = BrineFluidProperties
[]
[methane]
type = MethaneFluidProperties
[]
[methane_tab]
type = TabulatedBicubicFluidProperties
fp = methane
save_file = false
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = temperature
[]
[ps]
type = PorousFlow2PhasePS
phase0_porepressure = pp_liq
phase1_saturation = sat_gas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph1_sp0'
[]
[brine]
type = PorousFlowBrine
compute_enthalpy = false
compute_internal_energy = false
xnacl = xnacl
phase = 0
[]
[methane]
type = PorousFlowSingleComponentFluid
compute_enthalpy = false
compute_internal_energy = false
fp = methane_tab
phase = 1
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-13 0 0 0 5e-14 0 0 0 1e-13'
[]
[relperm_liq]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
s_res = 0.2
sum_s_res = 0.3
[]
[relperm_gas]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 1
s_res = 0.1
sum_s_res = 0.3
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
petsc_options_iname = '-pc_type -sub_pc_type -sub_pc_factor_shift_type'
petsc_options_value = ' asm lu NONZERO'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
end_time = 1e8
nl_abs_tol = 1e-12
nl_rel_tol = 1e-06
nl_max_its = 20
dtmax = 1e6
[TimeStepper]
type = IterationAdaptiveDT
dt = 1e1
growth_factor = 1.5
[]
[]
[Postprocessors]
[mass_ph0]
type = PorousFlowFluidMass
fluid_component = 0
execute_on = 'initial timestep_end'
[]
[mass_ph1]
type = PorousFlowFluidMass
fluid_component = 1
execute_on = 'initial timestep_end'
[]
[injection_area]
type = AreaPostprocessor
boundary = left
execute_on = initial
[]
[]
[Outputs]
execute_on = 'initial timestep_end'
exodus = true
perf_graph = true
[]
(modules/porous_flow/test/tests/dirackernels/bh_except16.i)
# fully-saturated
# production
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 1
xmin = -1
xmax = 1
ymin = -1
ymax = 1
zmin = -1
zmax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
initial_condition = 1E7
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[borehole_total_outflow_mass]
type = PorousFlowSumQuantity
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1e-7
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e9
viscosity = 1e-3
density0 = 1000
thermal_expansion = 0
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-12 0 0 0 1E-12 0 0 0 1E-12'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[]
[DiracKernels]
[bh]
type = PorousFlowPeacemanBorehole
function_of = temperature
bottom_p_or_t = 0
fluid_phase = 0
point_file = bh02.bh
SumQuantityUO = borehole_total_outflow_mass
variable = pp
unit_weight = '0 0 0'
character = 1
[]
[]
[Postprocessors]
[bh_report]
type = PorousFlowPlotQuantity
uo = borehole_total_outflow_mass
[]
[fluid_mass0]
type = PorousFlowFluidMass
execute_on = timestep_begin
[]
[fluid_mass1]
type = PorousFlowFluidMass
execute_on = timestep_end
[]
[zmass_error]
type = FunctionValuePostprocessor
function = mass_bal_fcn
execute_on = timestep_end
[]
[p0]
type = PointValue
variable = pp
point = '0 0 0'
execute_on = timestep_end
[]
[]
[Functions]
[mass_bal_fcn]
type = ParsedFunction
expression = abs((a-c+d)/2/(a+c))
symbol_names = 'a c d'
symbol_values = 'fluid_mass1 fluid_mass0 bh_report'
[]
[]
[Preconditioning]
[usual]
type = SMP
full = true
petsc_options = '-snes_converged_reason'
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -ksp_max_it'
petsc_options_value = 'bcgs bjacobi 1E-10 1E-10 10000 30'
[]
[]
[Executioner]
type = Transient
end_time = 0.5
dt = 1E-2
solve_type = NEWTON
[]
(modules/porous_flow/test/tests/gravity/grav02f.i)
# Checking that gravity head is established in the transient situation when 0<=saturation<=1 (note the less-than-or-equal-to).
# 2phase (PS), 2components, van Genuchten capillary pressure, constant fluid bulk-moduli for each phase, constant viscosity,
# constant permeability, Corey relative permeabilities with residual saturation
[Mesh]
type = GeneratedMesh
dim = 2
ny = 10
ymax = 100
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 -10 0'
[]
[Variables]
[ppwater]
initial_condition = 1.5e6
[]
[sgas]
initial_condition = 0.3
[]
[]
[AuxVariables]
[massfrac_ph0_sp0]
initial_condition = 1
[]
[massfrac_ph1_sp0]
initial_condition = 0
[]
[ppgas]
family = MONOMIAL
order = CONSTANT
[]
[swater]
family = MONOMIAL
order = CONSTANT
[]
[relpermwater]
family = MONOMIAL
order = CONSTANT
[]
[relpermgas]
family = MONOMIAL
order = CONSTANT
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = ppwater
[]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = ppwater
[]
[mass1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = sgas
[]
[flux1]
type = PorousFlowAdvectiveFlux
fluid_component = 1
variable = sgas
[]
[]
[AuxKernels]
[ppgas]
type = PorousFlowPropertyAux
property = pressure
phase = 1
variable = ppgas
[]
[swater]
type = PorousFlowPropertyAux
property = saturation
phase = 0
variable = swater
[]
[relpermwater]
type = MaterialStdVectorAux
property = PorousFlow_relative_permeability_qp
index = 0
variable = relpermwater
[]
[relpermgas]
type = PorousFlowPropertyAux
property = relperm
phase = 1
variable = relpermgas
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'ppwater sgas'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1e-4
pc_max = 2e5
[]
[]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 2e9
density0 = 1000
viscosity = 1e-3
thermal_expansion = 0
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 2e9
density0 = 10
viscosity = 1e-5
thermal_expansion = 0
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePS
phase0_porepressure = ppwater
phase1_saturation = sgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph1_sp0'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-11 0 0 0 1e-11 0 0 0 1e-11'
[]
[relperm_water]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
s_res = 0.25
sum_s_res = 0.35
[]
[relperm_gas]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 1
s_res = 0.1
sum_s_res = 0.35
[]
[]
[Postprocessors]
[mass_ph0]
type = PorousFlowFluidMass
fluid_component = 0
execute_on = 'initial timestep_end'
[]
[mass_ph1]
type = PorousFlowFluidMass
fluid_component = 1
execute_on = 'initial timestep_end'
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_stol -snes_max_it'
petsc_options_value = 'bcgs bjacobi 1E-13 15'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
end_time = 1e5
[TimeStepper]
type = IterationAdaptiveDT
dt = 1e4
[]
[]
[Outputs]
execute_on = 'initial timestep_end'
file_base = grav02f
exodus = true
perf_graph = true
csv = false
[]
(modules/porous_flow/test/tests/gravity/grav01a.i)
# Checking that gravity head is established
# 1phase, vanGenuchten, constant fluid-bulk, constant viscosity, constant permeability, Corey relative perm
# fully saturated
# For better agreement with the analytical solution (ana_pp), just increase nx
[Mesh]
type = GeneratedMesh
dim = 1
nx = 100
xmin = -1
xmax = 0
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
[InitialCondition]
type = RandomIC
min = 0
max = 1
[]
[]
[]
[Kernels]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = pp
gravity = '-1 0 0'
[]
[]
[Functions]
[ana_pp]
type = ParsedFunction
symbol_names = 'g B p0 rho0'
symbol_values = '1 1.2 0 1'
expression = '-B*log(exp(-p0/B)+g*rho0*x/B)' # expected pp at base
[]
[]
[BCs]
[z]
type = DirichletBC
variable = pp
boundary = right
value = 0
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1.2
density0 = 1
viscosity = 1
thermal_expansion = 0
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 2 0 0 0 3'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 1
phase = 0
[]
[]
[Postprocessors]
[pp_base]
type = PointValue
variable = pp
point = '-1 0 0'
[]
[pp_analytical]
type = FunctionValuePostprocessor
function = ana_pp
point = '-1 0 0'
[]
[pp_00]
type = PointValue
variable = pp
point = '0 0 0'
[]
[pp_01]
type = PointValue
variable = pp
point = '-0.1 0 0'
[]
[pp_02]
type = PointValue
variable = pp
point = '-0.2 0 0'
[]
[pp_03]
type = PointValue
variable = pp
point = '-0.3 0 0'
[]
[pp_04]
type = PointValue
variable = pp
point = '-0.4 0 0'
[]
[pp_05]
type = PointValue
variable = pp
point = '-0.5 0 0'
[]
[pp_06]
type = PointValue
variable = pp
point = '-0.6 0 0'
[]
[pp_07]
type = PointValue
variable = pp
point = '-0.7 0 0'
[]
[pp_08]
type = PointValue
variable = pp
point = '-0.8 0 0'
[]
[pp_09]
type = PointValue
variable = pp
point = '-0.9 0 0'
[]
[pp_10]
type = PointValue
variable = pp
point = '-1 0 0'
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
[]
[]
[Executioner]
type = Steady
solve_type = Newton
[]
[Outputs]
execute_on = 'timestep_end'
file_base = grav01a
[csv]
type = CSV
[]
[]
(modules/porous_flow/test/tests/poro_elasticity/pp_generation_unconfined_constM.i)
# A sample is constrained on all sides, except its top
# and its boundaries are
# also impermeable. Fluid is pumped into the sample via a
# volumetric source (ie kg/second per cubic meter), and the
# rise in the top surface, porepressure, and stress are observed.
#
# In the standard poromechanics scenario, the Biot Modulus is held
# fixed and the source, s, has units m^3/second/m^3. Then the expected result
# is
# strain_zz = disp_z = BiotCoefficient*BiotModulus*s*t/((bulk + 4*shear/3) + BiotCoefficient^2*BiotModulus)
# porepressure = BiotModulus*(s*t - BiotCoefficient*strain_zz)
# stress_xx = (bulk - 2*shear/3)*strain_zz (remember this is effective stress)
# stress_zz = (bulk + 4*shear/3)*strain_zz (remember this is effective stress)
#
# In porous_flow, however, the source has units kg/second/m^3. The ratios remain
# fixed:
# stress_xx/strain_zz = (bulk - 2*shear/3) = 1 (for the parameters used here)
# stress_zz/strain_zz = (bulk + 4*shear/3) = 4 (for the parameters used here)
# porepressure/strain_zz = 13.3333333 (for the parameters used here)
#
# Expect
# disp_z = 0.3*10*s*t/((2 + 4*1.5/3) + 0.3^2*10) = 0.612245*s*t
# porepressure = 10*(s*t - 0.3*0.612245*s*t) = 8.163265*s*t
# stress_xx = (2 - 2*1.5/3)*0.612245*s*t = 0.612245*s*t
# stress_zz = (2 + 4*shear/3)*0.612245*s*t = 2.44898*s*t
# The relationship between the constant poroelastic source
# s (m^3/second/m^3) and the PorousFlow source, S (kg/second/m^3) is
# S = fluid_density * s = s * exp(porepressure/fluid_bulk)
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 1
xmin = -0.5
xmax = 0.5
ymin = -0.5
ymax = 0.5
zmin = -0.5
zmax = 0.5
[]
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
PorousFlowDictator = dictator
block = 0
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'porepressure disp_x disp_y disp_z'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.8
alpha = 1e-5
[]
[]
[Variables]
[disp_x]
[]
[disp_y]
[]
[disp_z]
[]
[porepressure]
[]
[]
[BCs]
[confinex]
type = DirichletBC
variable = disp_x
value = 0
boundary = 'left right'
[]
[confiney]
type = DirichletBC
variable = disp_y
value = 0
boundary = 'bottom top'
[]
[confinez]
type = DirichletBC
variable = disp_z
value = 0
boundary = 'back'
[]
[]
[Kernels]
[grad_stress_x]
type = StressDivergenceTensors
variable = disp_x
component = 0
[]
[grad_stress_y]
type = StressDivergenceTensors
variable = disp_y
component = 1
[]
[grad_stress_z]
type = StressDivergenceTensors
variable = disp_z
component = 2
[]
[poro_x]
type = PorousFlowEffectiveStressCoupling
biot_coefficient = 0.3
variable = disp_x
component = 0
[]
[poro_y]
type = PorousFlowEffectiveStressCoupling
biot_coefficient = 0.3
variable = disp_y
component = 1
[]
[poro_z]
type = PorousFlowEffectiveStressCoupling
biot_coefficient = 0.3
component = 2
variable = disp_z
[]
[poro_vol_exp]
type = PorousFlowMassVolumetricExpansion
variable = porepressure
fluid_component = 0
[]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = porepressure
[]
[flux]
type = PorousFlowAdvectiveFlux
variable = porepressure
gravity = '0 0 0'
fluid_component = 0
[]
[source]
type = BodyForce
function = '0.1*exp(8.163265306*0.1*t/3.3333333333)'
variable = porepressure
[]
[]
[AuxVariables]
[stress_xx]
order = CONSTANT
family = MONOMIAL
[]
[stress_xy]
order = CONSTANT
family = MONOMIAL
[]
[stress_xz]
order = CONSTANT
family = MONOMIAL
[]
[stress_yy]
order = CONSTANT
family = MONOMIAL
[]
[stress_yz]
order = CONSTANT
family = MONOMIAL
[]
[stress_zz]
order = CONSTANT
family = MONOMIAL
[]
[]
[AuxKernels]
[stress_xx]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xx
index_i = 0
index_j = 0
[]
[stress_xy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xy
index_i = 0
index_j = 1
[]
[stress_xz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xz
index_i = 0
index_j = 2
[]
[stress_yy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yy
index_i = 1
index_j = 1
[]
[stress_yz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yz
index_i = 1
index_j = 2
[]
[stress_zz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_zz
index_i = 2
index_j = 2
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 3.3333333333
density0 = 1
thermal_expansion = 0
viscosity = 1
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[elasticity_tensor]
type = ComputeElasticityTensor
C_ijkl = '1 1.5'
# bulk modulus is lambda + 2*mu/3 = 1 + 2*1.5/3 = 2
fill_method = symmetric_isotropic
[]
[strain]
type = ComputeSmallStrain
displacements = 'disp_x disp_y disp_z'
[]
[stress]
type = ComputeLinearElasticStress
[]
[eff_fluid_pressure]
type = PorousFlowEffectiveFluidPressure
[]
[vol_strain]
type = PorousFlowVolumetricStrain
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = porepressure
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityHMBiotModulus
porosity_zero = 0.1
biot_coefficient = 0.3
solid_bulk = 2
constant_fluid_bulk_modulus = 3.3333333333
constant_biot_modulus = 10.0
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 1 0 0 0 1' # unimportant
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 0 # unimportant in this fully-saturated situation
phase = 0
[]
[]
[Postprocessors]
[p0]
type = PointValue
outputs = csv
point = '0 0 0'
variable = porepressure
[]
[zdisp]
type = PointValue
outputs = csv
point = '0 0 0.5'
variable = disp_z
[]
[stress_xx]
type = PointValue
outputs = csv
point = '0 0 0'
variable = stress_xx
[]
[stress_yy]
type = PointValue
outputs = csv
point = '0 0 0'
variable = stress_yy
[]
[stress_zz]
type = PointValue
outputs = csv
point = '0 0 0'
variable = stress_zz
[]
[]
[Functions]
[stress_xx_over_strain_fcn]
type = ParsedFunction
expression = a/b
symbol_names = 'a b'
symbol_values = 'stress_xx zdisp'
[]
[stress_zz_over_strain_fcn]
type = ParsedFunction
expression = a/b
symbol_names = 'a b'
symbol_values = 'stress_zz zdisp'
[]
[p_over_strain_fcn]
type = ParsedFunction
expression = a/b
symbol_names = 'a b'
symbol_values = 'p0 zdisp'
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'bcgs bjacobi 1E-14 1E-10 10000'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
start_time = 0
end_time = 10
dt = 1
[]
[Outputs]
execute_on = 'timestep_end'
file_base = pp_generation_unconfined_constM
[csv]
type = CSV
[]
[]
(modules/porous_flow/test/tests/dirackernels/bh_except03.i)
# PorousFlowPeacemanBorehole exception test
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 1
xmin = -1
xmax = 1
ymin = -1
ymax = 1
zmin = -1
zmax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
initial_condition = 1E7
[]
[]
[Kernels]
[mass0]
type = TimeDerivative
variable = pp
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[borehole_total_outflow_mass]
type = PorousFlowSumQuantity
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1e-7
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e9
viscosity = 1e-3
density0 = 1000
thermal_expansion = 0
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
at_nodes = true # Needed to force expected error
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-12 0 0 0 1E-12 0 0 0 1E-12'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[]
[DiracKernels]
[bh]
type = PorousFlowPeacemanBorehole
bottom_p_or_t = 0
fluid_phase = 0
point_file = bh02.bh
SumQuantityUO = borehole_total_outflow_mass
variable = pp
unit_weight = '0 0 0'
character = 1
[]
[]
[Postprocessors]
[bh_report]
type = PorousFlowPlotQuantity
uo = borehole_total_outflow_mass
[]
[fluid_mass0]
type = PorousFlowFluidMass
execute_on = timestep_begin
[]
[fluid_mass1]
type = PorousFlowFluidMass
execute_on = timestep_end
[]
[zmass_error]
type = FunctionValuePostprocessor
function = mass_bal_fcn
execute_on = timestep_end
[]
[p0]
type = PointValue
variable = pp
point = '0 0 0'
execute_on = timestep_end
[]
[]
[Functions]
[mass_bal_fcn]
type = ParsedFunction
expression = abs((a-c+d)/2/(a+c))
symbol_names = 'a c d'
symbol_values = 'fluid_mass1 fluid_mass0 bh_report'
[]
[]
[Preconditioning]
[usual]
type = SMP
full = true
petsc_options = '-snes_converged_reason'
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -ksp_max_it'
petsc_options_value = 'bcgs bjacobi 1E-10 1E-10 10000 30'
[]
[]
[Executioner]
type = Transient
end_time = 0.5
dt = 1E-2
solve_type = NEWTON
[]
(modules/porous_flow/test/tests/dirackernels/bh_except09.i)
# PorousFlowPeacemanBorehole exception test
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 1
xmin = -1
xmax = 1
ymin = -1
ymax = 1
zmin = -1
zmax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
initial_condition = 1E7
[]
[]
[Kernels]
[mass0]
type = TimeDerivative
variable = pp
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[borehole_total_outflow_mass]
type = PorousFlowSumQuantity
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1e-7
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e9
viscosity = 1e-3
density0 = 1000
thermal_expansion = 0
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
compute_enthalpy = false
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[]
[DiracKernels]
[bh]
type = PorousFlowPeacemanBorehole
bottom_p_or_t = 0
fluid_phase = 0
point_file = bh02.bh
use_mobility = true
use_enthalpy = true
SumQuantityUO = borehole_total_outflow_mass
variable = pp
unit_weight = '0 0 0'
character = 1
[]
[]
[Postprocessors]
[bh_report]
type = PorousFlowPlotQuantity
uo = borehole_total_outflow_mass
[]
[fluid_mass0]
type = PorousFlowFluidMass
execute_on = timestep_begin
[]
[fluid_mass1]
type = PorousFlowFluidMass
execute_on = timestep_end
[]
[zmass_error]
type = FunctionValuePostprocessor
function = mass_bal_fcn
execute_on = timestep_end
[]
[p0]
type = PointValue
variable = pp
point = '0 0 0'
execute_on = timestep_end
[]
[]
[Functions]
[mass_bal_fcn]
type = ParsedFunction
expression = abs((a-c+d)/2/(a+c))
symbol_names = 'a c d'
symbol_values = 'fluid_mass1 fluid_mass0 bh_report'
[]
[]
[Preconditioning]
[usual]
type = SMP
full = true
petsc_options = '-snes_converged_reason'
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -ksp_max_it'
petsc_options_value = 'bcgs bjacobi 1E-10 1E-10 10000 30'
[]
[]
[Executioner]
type = Transient
end_time = 0.5
dt = 1E-2
solve_type = NEWTON
[]
(modules/porous_flow/test/tests/relperm/corey1.i)
# Test Corey relative permeability curve by varying saturation over the mesh
# Corey exponent n = 1 for both phases (linear residual saturation)
# No residual saturation in either phase
[Mesh]
type = GeneratedMesh
dim = 1
nx = 20
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[p0]
initial_condition = 1e6
[]
[s1]
[]
[]
[AuxVariables]
[s0aux]
family = MONOMIAL
order = CONSTANT
[]
[s1aux]
family = MONOMIAL
order = CONSTANT
[]
[kr0aux]
family = MONOMIAL
order = CONSTANT
[]
[kr1aux]
family = MONOMIAL
order = CONSTANT
[]
[]
[AuxKernels]
[s0]
type = PorousFlowPropertyAux
property = saturation
phase = 0
variable = s0aux
[]
[s1]
type = PorousFlowPropertyAux
property = saturation
phase = 1
variable = s1aux
[]
[kr0]
type = PorousFlowPropertyAux
property = relperm
phase = 0
variable = kr0aux
[]
[kr1]
type = PorousFlowPropertyAux
property = relperm
phase = 1
variable = kr1aux
[]
[]
[Functions]
[s1]
type = ParsedFunction
expression = x
[]
[]
[ICs]
[s1]
type = FunctionIC
variable = s1
function = s1
[]
[]
[Kernels]
[p0]
type = Diffusion
variable = p0
[]
[s1]
type = Diffusion
variable = s1
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'p0 s1'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureConst
pc = 0
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePS
phase0_porepressure = p0
phase1_saturation = s1
capillary_pressure = pc
[]
[kr0]
type = PorousFlowRelativePermeabilityCorey
phase = 0
n = 1
[]
[kr1]
type = PorousFlowRelativePermeabilityCorey
phase = 1
n = 1
[]
[]
[VectorPostprocessors]
[vpp]
type = LineValueSampler
warn_discontinuous_face_values = false
variable = 's0aux s1aux kr0aux kr1aux'
start_point = '0 0 0'
end_point = '1 0 0'
num_points = 20
sort_by = id
[]
[]
[Executioner]
type = Steady
solve_type = NEWTON
nl_abs_tol = 1e-8
[]
[BCs]
[sleft]
type = DirichletBC
variable = s1
value = 0
boundary = left
[]
[sright]
type = DirichletBC
variable = s1
value = 1
boundary = right
[]
[]
[Outputs]
csv = true
execute_on = timestep_end
[]
(modules/porous_flow/examples/restart/gas_injection.i)
# Using the results from the equilibrium run to provide the initial condition for
# porepressure, we now inject a gas phase into the brine-saturated reservoir. In this
# example, where the mesh used is identical to the mesh used in gravityeq.i, we can use
# the basic restart capability by simply setting the initial condition for porepressure
# using the results from gravityeq.i.
#
# Even though the gravity equilibrium is established using a 2D mesh, in this example,
# we shift the mesh 0.1 m to the right and rotate it about the Y axis to make a 2D radial
# model.
#
# Methane injection takes place over the surface of the hole created by rotating the mesh,
# and hence the injection area is 2 pi r h. We can calculate this using an AreaPostprocessor,
# and then use this in a ParsedFunction to calculate the injection rate so that 10 kg/s of
# methane is injected.
#
# Results can be improved by uniformly refining the initial mesh.
#
# Note: as this example uses the results from a previous simulation, gravityeq.i MUST be
# run before running this input file.
[Mesh]
uniform_refine = 1
[file]
type = FileMeshGenerator
file = gravityeq_out.e
[]
[translate]
type = TransformGenerator
transform = TRANSLATE
vector_value = '0.1 0 0'
input = file
[]
coord_type = RZ
rz_coord_axis = Y
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 -9.81 0'
temperature_unit = Celsius
[]
[Variables]
[pp_liq]
initial_from_file_var = porepressure
[]
[sat_gas]
initial_condition = 0
[]
[]
[AuxVariables]
[temperature]
initial_condition = 50
[]
[xnacl]
initial_condition = 0.1
[]
[brine_density]
family = MONOMIAL
order = CONSTANT
[]
[methane_density]
family = MONOMIAL
order = CONSTANT
[]
[massfrac_ph0_sp0]
initial_condition = 1
[]
[massfrac_ph1_sp0]
initial_condition = 0
[]
[pp_gas]
family = MONOMIAL
order = CONSTANT
[]
[sat_liq]
family = MONOMIAL
order = CONSTANT
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
variable = pp_liq
[]
[flux0]
type = PorousFlowAdvectiveFlux
variable = pp_liq
[]
[mass1]
type = PorousFlowMassTimeDerivative
variable = sat_gas
fluid_component = 1
[]
[flux1]
type = PorousFlowAdvectiveFlux
variable = sat_gas
fluid_component = 1
[]
[]
[AuxKernels]
[brine_density]
type = PorousFlowPropertyAux
property = density
variable = brine_density
execute_on = 'initial timestep_end'
[]
[methane_density]
type = PorousFlowPropertyAux
property = density
variable = methane_density
phase = 1
execute_on = 'initial timestep_end'
[]
[pp_gas]
type = PorousFlowPropertyAux
property = pressure
phase = 1
variable = pp_gas
execute_on = 'initial timestep_end'
[]
[sat_liq]
type = PorousFlowPropertyAux
property = saturation
variable = sat_liq
execute_on = 'initial timestep_end'
[]
[]
[BCs]
[gas_injection]
type = PorousFlowSink
boundary = left
variable = sat_gas
flux_function = injection_rate
fluid_phase = 1
[]
[brine_out]
type = PorousFlowPiecewiseLinearSink
boundary = right
variable = pp_liq
multipliers = '0 1e9'
pt_vals = '0 1e9'
fluid_phase = 0
flux_function = 1e-6
use_mobility = true
[]
[]
[Functions]
[injection_rate]
type = ParsedFunction
symbol_values = injection_area
symbol_names = area
expression = '-10/area'
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp_liq sat_gas'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
alpha = 1e-5
m = 0.5
sat_lr = 0.2
[]
[]
[FluidProperties]
[brine]
type = BrineFluidProperties
[]
[methane]
type = MethaneFluidProperties
[]
[methane_tab]
type = TabulatedBicubicFluidProperties
fp = methane
save_file = false
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = temperature
[]
[ps]
type = PorousFlow2PhasePS
phase0_porepressure = pp_liq
phase1_saturation = sat_gas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph1_sp0'
[]
[brine]
type = PorousFlowBrine
compute_enthalpy = false
compute_internal_energy = false
xnacl = xnacl
phase = 0
[]
[methane]
type = PorousFlowSingleComponentFluid
compute_enthalpy = false
compute_internal_energy = false
fp = methane_tab
phase = 1
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-13 0 0 0 1e-13 0 0 0 1e-13'
[]
[relperm_liq]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
s_res = 0.2
sum_s_res = 0.3
[]
[relperm_gas]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 1
s_res = 0.1
sum_s_res = 0.3
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
petsc_options_iname = '-pc_type -sub_pc_type -sub_pc_factor_shift_type'
petsc_options_value = ' asm lu NONZERO'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
end_time = 1e8
nl_abs_tol = 1e-12
nl_rel_tol = 1e-06
nl_max_its = 20
dtmax = 1e6
[TimeStepper]
type = IterationAdaptiveDT
dt = 1e1
[]
[]
[Postprocessors]
[mass_ph0]
type = PorousFlowFluidMass
fluid_component = 0
execute_on = 'initial timestep_end'
[]
[mass_ph1]
type = PorousFlowFluidMass
fluid_component = 1
execute_on = 'initial timestep_end'
[]
[injection_area]
type = AreaPostprocessor
boundary = left
execute_on = initial
[]
[]
[Outputs]
execute_on = 'initial timestep_end'
exodus = true
perf_graph = true
checkpoint = true
[]
(modules/porous_flow/test/tests/capillary_pressure/brooks_corey1.i)
# Test Brooks-Corey capillary pressure curve by varying saturation over the mesh
# lambda = 2, sat_lr = 0.1, log_extension = false
[Mesh]
type = GeneratedMesh
dim = 1
nx = 500
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[p0]
initial_condition = 1e6
[]
[s1]
[]
[]
[AuxVariables]
[s0aux]
family = MONOMIAL
order = CONSTANT
[]
[s1aux]
family = MONOMIAL
order = CONSTANT
[]
[p0aux]
family = MONOMIAL
order = CONSTANT
[]
[p1aux]
family = MONOMIAL
order = CONSTANT
[]
[]
[AuxKernels]
[s0]
type = PorousFlowPropertyAux
property = saturation
phase = 0
variable = s0aux
[]
[s1]
type = PorousFlowPropertyAux
property = saturation
phase = 1
variable = s1aux
[]
[p0]
type = PorousFlowPropertyAux
property = pressure
phase = 0
variable = p0aux
[]
[p1]
type = PorousFlowPropertyAux
property = pressure
phase = 1
variable = p1aux
[]
[]
[Functions]
[s1]
type = ParsedFunction
expression = x
[]
[]
[ICs]
[s1]
type = FunctionIC
variable = s1
function = s1
[]
[]
[Kernels]
[p0]
type = Diffusion
variable = p0
[]
[s1]
type = Diffusion
variable = s1
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'p0 s1'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureBC
lambda = 2
log_extension = false
pe = 1e5
sat_lr = 0.1
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePS
phase0_porepressure = p0
phase1_saturation = s1
capillary_pressure = pc
[]
[kr0]
type = PorousFlowRelativePermeabilityVG
phase = 0
m = 0.5
[]
[kr1]
type = PorousFlowRelativePermeabilityCorey
phase = 1
n = 2
[]
[]
[VectorPostprocessors]
[vpp]
type = LineValueSampler
variable = 's0aux s1aux p0aux p1aux'
start_point = '0 0 0'
end_point = '1 0 0'
num_points = 500
sort_by = id
[]
[]
[Executioner]
type = Steady
solve_type = NEWTON
nl_abs_tol = 1e-6
[]
[BCs]
[sleft]
type = DirichletBC
variable = s1
value = 0
boundary = left
[]
[sright]
type = DirichletBC
variable = s1
value = 1
boundary = right
[]
[]
[Outputs]
csv = true
execute_on = timestep_end
[]
(modules/porous_flow/test/tests/basic_advection/except2.i)
# PorousFlowDarcyVelocityMaterial attempts to have at_nodes = true
[Mesh]
type = GeneratedMesh
dim = 1
nx = 100
xmin = 0
xmax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[u]
[]
[]
[AuxVariables]
[P]
[]
[]
[ICs]
[P]
type = FunctionIC
variable = P
function = '2*(1-x)'
[]
[u]
type = FunctionIC
variable = u
function = 'if(x<0.1,1,0)'
[]
[]
[Kernels]
[u_dot]
type = TimeDerivative
variable = u
[]
[u_advection]
type = PorousFlowBasicAdvection
variable = u
phase = 1
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = ''
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureConst
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e9
density0 = 4
thermal_expansion = 0
viscosity = 150.0
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = P
capillary_pressure = pc
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '5 0 0 0 5 0 0 0 5'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 0
phase = 0
[]
[darcy_velocity]
type = PorousFlowDarcyVelocityMaterial
gravity = '0.25 0 0'
at_nodes = true
[]
[]
[BCs]
[left]
type = DirichletBC
boundary = left
value = 1
variable = u
[]
[right]
type = DirichletBC
boundary = right
value = 0
variable = u
[]
[]
[Preconditioning]
[basic]
type = SMP
full = true
petsc_options_iname = '-pc_type -snes_rtol'
petsc_options_value = ' lu 1E-10'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 5
[]
[Outputs]
exodus = true
print_linear_residuals = false
[]
(modules/porous_flow/test/tests/heat_advection/heat_advection_1d_KT.i)
# 1phase, heat advecting with a moving fluid
# Using the Kuzmin-Turek stabilization scheme
[Mesh]
type = GeneratedMesh
dim = 1
nx = 50
xmin = 0
xmax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[Variables]
[temp]
initial_condition = 200
[]
[pp]
[]
[]
[ICs]
[pp]
type = FunctionIC
variable = pp
function = '1-x'
[]
[]
[BCs]
[pp0]
type = DirichletBC
variable = pp
boundary = left
value = 1
[]
[pp1]
type = DirichletBC
variable = pp
boundary = right
value = 0
[]
[spit_heat]
type = DirichletBC
variable = temp
boundary = left
value = 300
[]
[suck_heat]
type = DirichletBC
variable = temp
boundary = right
value = 200
[]
[]
[Kernels]
[mass_dot]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
[]
[fluid_advection]
type = PorousFlowFluxLimitedTVDAdvection
variable = pp
advective_flux_calculator = fluid_advective_flux
[]
[energy_dot]
type = PorousFlowEnergyTimeDerivative
variable = temp
[]
[heat_advection]
type = PorousFlowFluxLimitedTVDAdvection
variable = temp
advective_flux_calculator = heat_advective_flux
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'temp pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.6
alpha = 1.3
[]
[fluid_advective_flux]
type = PorousFlowAdvectiveFluxCalculatorSaturated
flux_limiter_type = superbee
[]
[heat_advective_flux]
type = PorousFlowAdvectiveFluxCalculatorSaturatedHeat
flux_limiter_type = superbee
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 100
density0 = 1000
viscosity = 4.4
thermal_expansion = 0
cv = 2
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = temp
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.2
[]
[rock_heat]
type = PorousFlowMatrixInternalEnergy
specific_heat_capacity = 1.0
density = 125
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1.1 0 0 0 2 0 0 0 3'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[massfrac]
type = PorousFlowMassFraction
[]
[PS]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'gmres bjacobi 1E-15 1E-10 10000'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 0.01
end_time = 0.6
[]
[VectorPostprocessors]
[T]
type = LineValueSampler
start_point = '0 0 0'
end_point = '1 0 0'
num_points = 51
sort_by = x
variable = temp
[]
[]
[Outputs]
file_base = heat_advection_1d_KT
[csv]
type = CSV
sync_times = '0.1 0.6'
sync_only = true
[]
[]
(modules/porous_flow/test/tests/basic_advection/1phase.i)
# Basic advection of u in a 1-phase situation
#
# grad(P) = -2
# density * gravity = 4 * 0.25
# grad(P) - density * gravity = -3
# permeability = 5
# viscosity = 150
# so Darcy velocity = 0.1
[Mesh]
type = GeneratedMesh
dim = 1
nx = 10
xmin = 0
xmax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[u]
[]
[]
[AuxVariables]
[P]
[]
[]
[ICs]
[P]
type = FunctionIC
variable = P
function = '2*(1-x)'
[]
[u]
type = FunctionIC
variable = u
function = 'if(x<0.1,1,0)'
[]
[]
[Kernels]
[u_dot]
type = TimeDerivative
variable = u
[]
[u_advection]
type = PorousFlowBasicAdvection
variable = u
phase = 0
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = ''
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureConst
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e9
density0 = 4
thermal_expansion = 0
viscosity = 150.0
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = P
capillary_pressure = pc
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '5 0 0 0 5 0 0 0 5'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 0
phase = 0
[]
[darcy_velocity]
type = PorousFlowDarcyVelocityMaterial
gravity = '0.25 0 0'
[]
[]
[BCs]
[left]
type = DirichletBC
boundary = left
value = 1
variable = u
[]
[right]
type = DirichletBC
boundary = right
value = 0
variable = u
[]
[]
[Preconditioning]
[basic]
type = SMP
full = true
petsc_options_iname = '-pc_type -snes_rtol'
petsc_options_value = ' lu 1E-10'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 5
[]
[Outputs]
exodus = true
print_linear_residuals = false
[]
(modules/porous_flow/test/tests/sinks/s03.i)
# apply a sink flux with use_relperm=true and observe the correct behavior
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 1
xmin = 0
xmax = 1
ymin = 0
ymax = 1
zmin = 0
zmax = 2
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1.1
[]
[]
[Variables]
[pp]
[]
[]
[ICs]
[pp]
type = FunctionIC
variable = pp
function = -y
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1.3
density0 = 1.1
thermal_expansion = 0
viscosity = 1.1
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '0.2 0 0 0 0.1 0 0 0 0.1'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[]
[AuxVariables]
[flux_out]
[]
[xval]
[]
[yval]
[]
[]
[ICs]
[xval]
type = FunctionIC
variable = xval
function = x
[]
[yval]
type = FunctionIC
variable = yval
function = y
[]
[]
[Functions]
[mass00]
type = ParsedFunction
expression = 'vol*por*dens0*exp(pp/bulk)*pow(1+pow(-al*pp,1.0/(1-m)),-m)'
symbol_names = 'vol por dens0 pp bulk al m'
symbol_values = '0.25 0.1 1.1 p00 1.3 1.1 0.5'
[]
[sat00]
type = ParsedFunction
expression = 'pow(1+pow(-al*pp,1.0/(1-m)),-m)'
symbol_names = 'pp al m'
symbol_values = 'p00 1.1 0.5'
[]
[mass01]
type = ParsedFunction
expression = 'vol*por*dens0*exp(pp/bulk)*pow(1+pow(-al*pp,1.0/(1-m)),-m)'
symbol_names = 'vol por dens0 pp bulk al m'
symbol_values = '0.25 0.1 1.1 p01 1.3 1.1 0.5'
[]
[expected_mass_change00]
type = ParsedFunction
expression = 'fcn*pow(pow(1+pow(-al*pp,1.0/(1-m)),-m),2)*area*dt'
symbol_names = 'fcn perm dens0 pp bulk visc area dt al m'
symbol_values = '6 0.2 1.1 p00 1.3 1.1 0.5 1E-3 1.1 0.5'
[]
[expected_mass_change01]
type = ParsedFunction
expression = 'fcn*pow(pow(1+pow(-al*pp,1.0/(1-m)),-m),2)*area*dt'
symbol_names = 'fcn perm dens0 pp bulk visc area dt al m'
symbol_values = '6 0.2 1.1 p01 1.3 1.1 0.5 1E-3 1.1 0.5'
[]
[mass00_expect]
type = ParsedFunction
expression = 'mass_prev-mass_change'
symbol_names = 'mass_prev mass_change'
symbol_values = 'm00_prev del_m00'
[]
[mass01_expect]
type = ParsedFunction
expression = 'mass_prev-mass_change'
symbol_names = 'mass_prev mass_change'
symbol_values = 'm01_prev del_m01'
[]
[sat01]
type = ParsedFunction
expression = 'pow(1+pow(-al*pp,1.0/(1-m)),-m)'
symbol_names = 'pp al m'
symbol_values = 'p01 1.1 0.5'
[]
[expected_mass_change_rate]
type = ParsedFunction
expression = 'fcn*pow(pow(1+pow(-al*pp,1.0/(1-m)),-m),2)*area'
symbol_names = 'fcn perm dens0 pp bulk visc area dt al m'
symbol_values = '6 0.2 1.1 p00 1.3 1.1 0.5 1E-3 1.1 0.5'
[]
[]
[Postprocessors]
[p00]
type = PointValue
point = '0 0 0'
variable = pp
execute_on = 'initial timestep_end'
[]
[m00]
type = FunctionValuePostprocessor
function = mass00
execute_on = 'initial timestep_end'
[]
[m00_prev]
type = FunctionValuePostprocessor
function = mass00
execute_on = 'timestep_begin'
outputs = 'console'
[]
[del_m00]
type = FunctionValuePostprocessor
function = expected_mass_change00
execute_on = 'timestep_end'
outputs = 'console'
[]
[m00_expect]
type = FunctionValuePostprocessor
function = mass00_expect
execute_on = 'timestep_end'
[]
[p10]
type = PointValue
point = '1 0 0'
variable = pp
execute_on = 'initial timestep_end'
[]
[p01]
type = PointValue
point = '0 1 0'
variable = pp
execute_on = 'initial timestep_end'
[]
[m01]
type = FunctionValuePostprocessor
function = mass01
execute_on = 'initial timestep_end'
[]
[m01_prev]
type = FunctionValuePostprocessor
function = mass01
execute_on = 'timestep_begin'
outputs = 'console'
[]
[del_m01]
type = FunctionValuePostprocessor
function = expected_mass_change01
execute_on = 'timestep_end'
outputs = 'console'
[]
[m01_expect]
type = FunctionValuePostprocessor
function = mass01_expect
execute_on = 'timestep_end'
[]
[p11]
type = PointValue
point = '1 1 0'
variable = pp
execute_on = 'initial timestep_end'
[]
[s00]
type = FunctionValuePostprocessor
function = sat00
execute_on = 'initial timestep_end'
[]
[mass00_rate]
type = FunctionValuePostprocessor
function = expected_mass_change_rate
execute_on = 'initial timestep_end'
[]
[]
[BCs]
[flux]
type = PorousFlowSink
boundary = 'left'
variable = pp
use_mobility = false
use_relperm = true
fluid_phase = 0
flux_function = 6
save_in = flux_out
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -sub_pc_type -snes_max_it -sub_pc_factor_shift_type -pc_asm_overlap'
petsc_options_value = 'gmres asm lu 10 NONZERO 2'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1E-3
end_time = 0.018
nl_rel_tol = 1E-12
nl_abs_tol = 1E-12
[]
[Outputs]
file_base = s03
[console]
type = Console
execute_on = 'nonlinear linear'
time_step_interval = 5
[]
[csv]
type = CSV
execute_on = 'timestep_end'
time_step_interval = 2
[]
[]
(modules/porous_flow/test/tests/jacobian/waterncg_twophase.i)
# Tests correct calculation of properties derivatives in PorousFlowWaterNCG
# for conditions for two phases
[Mesh]
type = GeneratedMesh
dim = 2
nx = 2
ny = 2
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[Variables]
[pgas]
[]
[z]
[]
[]
[ICs]
[pgas]
type = RandomIC
min = 1e5
max = 5e5
variable = pgas
[]
[z]
type = RandomIC
min = 0.01
max = 0.06
variable = z
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
variable = pgas
fluid_component = 0
[]
[mass1]
type = PorousFlowMassTimeDerivative
variable = z
fluid_component = 1
[]
[adv0]
type = PorousFlowAdvectiveFlux
variable = pgas
fluid_component = 0
[]
[adv1]
type = PorousFlowAdvectiveFlux
variable = z
fluid_component = 1
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pgas z'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1e1
pc_max = 1e4
[]
[fs]
type = PorousFlowWaterNCG
water_fp = water
gas_fp = co2
capillary_pressure = pc
[]
[]
[FluidProperties]
[co2]
type = CO2FluidProperties
[]
[water]
type = Water97FluidProperties
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = 50
[]
[waterncg]
type = PorousFlowFluidState
gas_porepressure = pgas
z = z
temperature_unit = Celsius
capillary_pressure = pc
fluid_state = fs
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-12 0 0 0 1e-12 0 0 0 1e-12'
[]
[relperm0]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[relperm1]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 1
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[]
[Executioner]
type = Transient
solve_type = NEWTON
dt = 1
end_time = 1
nl_abs_tol = 1e-12
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[AuxVariables]
[sgas]
family = MONOMIAL
order = CONSTANT
[]
[]
[AuxKernels]
[sgas]
type = PorousFlowPropertyAux
property = saturation
phase = 1
variable = sgas
[]
[]
[Postprocessors]
[sgas_min]
type = ElementExtremeValue
variable = sgas
value_type = min
[]
[sgas_max]
type = ElementExtremeValue
variable = sgas
value_type = max
[]
[]
(modules/porous_flow/test/tests/newton_cooling/nc08.i)
# Newton cooling from a bar. 1-phase ideal fluid and heat, steady
[Mesh]
type = GeneratedMesh
dim = 2
nx = 100
ny = 1
xmin = 0
xmax = 100
ymin = 0
ymax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pressure temp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.8
alpha = 1e-5
[]
[]
[Variables]
[pressure]
[]
[temp]
[]
[]
[ICs]
# have to start these reasonably close to their steady-state values
[pressure]
type = FunctionIC
variable = pressure
function = '200-0.5*x'
[]
[temperature]
type = FunctionIC
variable = temp
function = 180+0.1*x
[]
[]
[Kernels]
[flux]
type = PorousFlowAdvectiveFlux
fluid_component = 0
gravity = '0 0 0'
variable = pressure
[]
[heat_advection]
type = PorousFlowHeatAdvection
gravity = '0 0 0'
variable = temp
[]
[]
[FluidProperties]
[idealgas]
type = IdealGasFluidProperties
molar_mass = 1.4
gamma = 1.2
mu = 1.2
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = temp
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pressure
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[dens0]
type = PorousFlowSingleComponentFluid
fp = idealgas
phase = 0
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1.1 0 0 0 1.1 0 0 0 1.1'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey # irrelevant in this fully-saturated situation
n = 2
phase = 0
[]
[]
[BCs]
[leftp]
type = DirichletBC
variable = pressure
boundary = left
value = 200
[]
[leftt]
type = DirichletBC
variable = temp
boundary = left
value = 180
[]
[newtonp]
type = PorousFlowPiecewiseLinearSink
variable = pressure
boundary = right
pt_vals = '-200 0 200'
multipliers = '-200 0 200'
use_mobility = true
use_relperm = true
fluid_phase = 0
flux_function = 0.005 # 1/2/L
[]
[newtont]
type = PorousFlowPiecewiseLinearSink
variable = temp
boundary = right
pt_vals = '-200 0 200'
multipliers = '-200 0 200'
use_mobility = true
use_relperm = true
use_enthalpy = true
fluid_phase = 0
flux_function = 0.005 # 1/2/L
[]
[]
[VectorPostprocessors]
[porepressure]
type = LineValueSampler
variable = pressure
start_point = '0 0.5 0'
end_point = '100 0.5 0'
sort_by = x
num_points = 11
execute_on = timestep_end
[]
[temperature]
type = LineValueSampler
variable = temp
start_point = '0 0.5 0'
end_point = '100 0.5 0'
sort_by = x
num_points = 11
execute_on = timestep_end
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
[]
[]
[Executioner]
type = Steady
solve_type = Newton
nl_rel_tol = 1E-10
nl_abs_tol = 1E-15
[]
[Outputs]
file_base = nc08
execute_on = timestep_end
[along_line]
type = CSV
execute_vector_postprocessors_on = timestep_end
[]
[]
(modules/porous_flow/test/tests/jacobian/fflux09.i)
# 2phase (PP), 3components (that exist in both phases), constant viscosity, constant insitu permeability
# density with constant bulk, Corey relative perm, nonzero gravity, unsaturated with RSC capillary
[Mesh]
type = GeneratedMesh
dim = 2
nx = 2
xmin = 0
xmax = 1
ny = 1
ymin = 0
ymax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[ppwater]
[]
[ppgas]
[]
[massfrac_ph0_sp0]
[]
[]
[AuxVariables]
[massfrac_ph0_sp1]
[]
[massfrac_ph1_sp0]
[]
[massfrac_ph1_sp1]
[]
[]
[ICs]
[ppwater]
type = RandomIC
variable = ppwater
min = -1
max = 0
[]
[ppgas]
type = RandomIC
variable = ppgas
min = 0
max = 1
[]
[massfrac_ph0_sp0]
type = RandomIC
variable = massfrac_ph0_sp0
min = 0
max = 0.4
[]
[massfrac_ph0_sp1]
type = RandomIC
variable = massfrac_ph0_sp1
min = 0
max = 0.4
[]
[massfrac_ph1_sp0]
type = RandomIC
variable = massfrac_ph1_sp0
min = 0
max = 0.4
[]
[massfrac_ph1_sp1]
type = RandomIC
variable = massfrac_ph1_sp1
min = 0
max = 0.4
[]
[]
[Kernels]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = ppwater
gravity = '-1 -0.1 0'
[]
[flux1]
type = PorousFlowAdvectiveFlux
fluid_component = 1
variable = ppgas
gravity = '-1 -0.1 0'
[]
[flux2]
type = PorousFlowAdvectiveFlux
fluid_component = 2
variable = massfrac_ph0_sp0
gravity = '-1 -0.1 0'
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'ppwater ppgas massfrac_ph0_sp0'
number_fluid_phases = 2
number_fluid_components = 3
[]
[pc]
type = PorousFlowCapillaryPressureRSC
shift = -0.1
scale_ratio = 3
oil_viscosity = 2
[]
[]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 1.5
density0 = 1
thermal_expansion = 0
viscosity = 1
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 0.5
density0 = 0.5
thermal_expansion = 0
viscosity = 1
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePP
phase0_porepressure = ppwater
phase1_porepressure = ppgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph0_sp1 massfrac_ph1_sp0 massfrac_ph1_sp1'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 2 0 0 0 3'
[]
[relperm0]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[relperm1]
type = PorousFlowRelativePermeabilityCorey
n = 3
phase = 1
[]
[]
[Preconditioning]
active = check
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000'
[]
[check]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -snes_type'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000 test'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
[Outputs]
exodus = false
[]
(modules/porous_flow/test/tests/poro_elasticity/mandel.i)
# Mandel's problem of consolodation of a drained medium
#
# A sample is in plane strain.
# -a <= x <= a
# -b <= y <= b
# It is squashed with constant force by impermeable, frictionless plattens on its top and bottom surfaces (at y=+/-b)
# Fluid is allowed to leak out from its sides (at x=+/-a)
# The porepressure within the sample is monitored.
#
# As is common in the literature, this is simulated by
# considering the quarter-sample, 0<=x<=a and 0<=y<=b, with
# impermeable, roller BCs at x=0 and y=0 and y=b.
# Porepressure is fixed at zero on x=a.
# Porepressure and displacement are initialised to zero.
# Then the top (y=b) is moved downwards with prescribed velocity,
# so that the total force that is inducing this downwards velocity
# is fixed. The velocity is worked out by solving Mandel's problem
# analytically, and the total force is monitored in the simulation
# to check that it indeed remains constant.
#
# Here are the problem's parameters, and their values:
# Soil width. a = 1
# Soil height. b = 0.1
# Soil's Lame lambda. la = 0.5
# Soil's Lame mu, which is also the Soil's shear modulus. mu = G = 0.75
# Soil bulk modulus. K = la + 2*mu/3 = 1
# Drained Poisson ratio. nu = (3K - 2G)/(6K + 2G) = 0.2
# Soil bulk compliance. 1/K = 1
# Fluid bulk modulus. Kf = 8
# Fluid bulk compliance. 1/Kf = 0.125
# Soil initial porosity. phi0 = 0.1
# Biot coefficient. alpha = 0.6
# Biot modulus. M = 1/(phi0/Kf + (alpha - phi0)(1 - alpha)/K) = 4.705882
# Undrained bulk modulus. Ku = K + alpha^2*M = 2.694118
# Undrained Poisson ratio. nuu = (3Ku - 2G)/(6Ku + 2G) = 0.372627
# Skempton coefficient. B = alpha*M/Ku = 1.048035
# Fluid mobility (soil permeability/fluid viscosity). k = 1.5
# Consolidation coefficient. c = 2*k*B^2*G*(1-nu)*(1+nuu)^2/9/(1-nuu)/(nuu-nu) = 3.821656
# Normal stress on top. F = 1
#
# The solution for porepressure and displacements is given in
# AHD Cheng and E Detournay "A direct boundary element method for plane strain poroelasticity" International Journal of Numerical and Analytical Methods in Geomechanics 12 (1988) 551-572.
# The solution involves complicated infinite series, so I shall not write it here
#
# FINAL NOTE: The above solution assumes constant Biot Modulus.
# In porous_flow this is not true. Therefore the solution is
# a little different than in the paper. This test was therefore
# validated against MOOSE's poromechanics, which can choose either
# a constant Biot Modulus (which has been shown to agree with
# the analytic solution), or a non-constant Biot Modulus (which
# gives the same results as porous_flow).
[Mesh]
type = GeneratedMesh
dim = 3
nx = 10
ny = 1
nz = 1
xmin = 0
xmax = 1
ymin = 0
ymax = 0.1
zmin = 0
zmax = 1
[]
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
PorousFlowDictator = dictator
block = 0
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'porepressure disp_x disp_y disp_z'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.8
alpha = 1e-5
[]
[]
[Variables]
[disp_x]
[]
[disp_y]
[]
[disp_z]
[]
[porepressure]
[]
[]
[BCs]
[roller_xmin]
type = DirichletBC
variable = disp_x
value = 0
boundary = 'left'
[]
[roller_ymin]
type = DirichletBC
variable = disp_y
value = 0
boundary = 'bottom'
[]
[plane_strain]
type = DirichletBC
variable = disp_z
value = 0
boundary = 'back front'
[]
[xmax_drained]
type = DirichletBC
variable = porepressure
value = 0
boundary = right
[]
[top_velocity]
type = FunctionDirichletBC
variable = disp_y
function = top_velocity
boundary = top
[]
[]
[Functions]
[top_velocity]
type = PiecewiseLinear
x = '0 0.002 0.006 0.014 0.03 0.046 0.062 0.078 0.094 0.11 0.126 0.142 0.158 0.174 0.19 0.206 0.222 0.238 0.254 0.27 0.286 0.302 0.318 0.334 0.35 0.366 0.382 0.398 0.414 0.43 0.446 0.462 0.478 0.494 0.51 0.526 0.542 0.558 0.574 0.59 0.606 0.622 0.638 0.654 0.67 0.686 0.702'
y = '-0.041824842 -0.042730269 -0.043412712 -0.04428867 -0.045509181 -0.04645965 -0.047268246 -0.047974749 -0.048597109 -0.0491467 -0.049632388 -0.050061697 -0.050441198 -0.050776675 -0.051073238 -0.0513354 -0.051567152 -0.051772022 -0.051953128 -0.052113227 -0.052254754 -0.052379865 -0.052490464 -0.052588233 -0.052674662 -0.052751065 -0.052818606 -0.052878312 -0.052931093 -0.052977751 -0.053018997 -0.053055459 -0.053087691 -0.053116185 -0.053141373 -0.05316364 -0.053183324 -0.053200724 -0.053216106 -0.053229704 -0.053241725 -0.053252351 -0.053261745 -0.053270049 -0.053277389 -0.053283879 -0.053289615'
[]
[]
[AuxVariables]
[stress_yy]
order = CONSTANT
family = MONOMIAL
[]
[tot_force]
order = CONSTANT
family = MONOMIAL
[]
[]
[AuxKernels]
[stress_yy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yy
index_i = 1
index_j = 1
[]
[tot_force]
type = ParsedAux
coupled_variables = 'stress_yy porepressure'
execute_on = timestep_end
variable = tot_force
expression = '-stress_yy+0.6*porepressure'
[]
[]
[Kernels]
[grad_stress_x]
type = StressDivergenceTensors
variable = disp_x
component = 0
[]
[grad_stress_y]
type = StressDivergenceTensors
variable = disp_y
component = 1
[]
[grad_stress_z]
type = StressDivergenceTensors
variable = disp_z
component = 2
[]
[poro_x]
type = PorousFlowEffectiveStressCoupling
biot_coefficient = 0.6
variable = disp_x
component = 0
[]
[poro_y]
type = PorousFlowEffectiveStressCoupling
biot_coefficient = 0.6
variable = disp_y
component = 1
[]
[poro_z]
type = PorousFlowEffectiveStressCoupling
biot_coefficient = 0.6
component = 2
variable = disp_z
[]
[poro_vol_exp]
type = PorousFlowMassVolumetricExpansion
variable = porepressure
fluid_component = 0
[]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = porepressure
[]
[flux]
type = PorousFlowAdvectiveFlux
variable = porepressure
gravity = '0 0 0'
fluid_component = 0
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 8
density0 = 1
thermal_expansion = 0
viscosity = 1
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[elasticity_tensor]
type = ComputeElasticityTensor
C_ijkl = '0.5 0.75'
# bulk modulus is lambda + 2*mu/3 = 0.5 + 2*0.75/3 = 1
fill_method = symmetric_isotropic
[]
[strain]
type = ComputeSmallStrain
[]
[stress]
type = ComputeLinearElasticStress
[]
[eff_fluid_pressure]
type = PorousFlowEffectiveFluidPressure
[]
[vol_strain]
type = PorousFlowVolumetricStrain
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = porepressure
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosity
fluid = true
mechanical = true
ensure_positive = false
porosity_zero = 0.1
biot_coefficient = 0.6
solid_bulk = 1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1.5 0 0 0 1.5 0 0 0 1.5'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 0 # unimportant in this fully-saturated situation
phase = 0
[]
[]
[Postprocessors]
[p0]
type = PointValue
outputs = csv
point = '0.0 0 0'
variable = porepressure
[]
[p1]
type = PointValue
outputs = csv
point = '0.1 0 0'
variable = porepressure
[]
[p2]
type = PointValue
outputs = csv
point = '0.2 0 0'
variable = porepressure
[]
[p3]
type = PointValue
outputs = csv
point = '0.3 0 0'
variable = porepressure
[]
[p4]
type = PointValue
outputs = csv
point = '0.4 0 0'
variable = porepressure
[]
[p5]
type = PointValue
outputs = csv
point = '0.5 0 0'
variable = porepressure
[]
[p6]
type = PointValue
outputs = csv
point = '0.6 0 0'
variable = porepressure
[]
[p7]
type = PointValue
outputs = csv
point = '0.7 0 0'
variable = porepressure
[]
[p8]
type = PointValue
outputs = csv
point = '0.8 0 0'
variable = porepressure
[]
[p9]
type = PointValue
outputs = csv
point = '0.9 0 0'
variable = porepressure
[]
[p99]
type = PointValue
outputs = csv
point = '1 0 0'
variable = porepressure
[]
[xdisp]
type = PointValue
outputs = csv
point = '1 0.1 0'
variable = disp_x
[]
[ydisp]
type = PointValue
outputs = csv
point = '1 0.1 0'
variable = disp_y
[]
[total_downwards_force]
type = ElementAverageValue
outputs = csv
variable = tot_force
[]
[dt]
type = FunctionValuePostprocessor
outputs = console
function = if(0.15*t<0.01,0.15*t,0.01)
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -sub_pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'gmres asm lu 1E-14 1E-10 10000'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
start_time = 0
end_time = 0.7
[TimeStepper]
type = PostprocessorDT
postprocessor = dt
dt = 0.001
[]
[]
[Outputs]
execute_on = 'timestep_end'
file_base = mandel
[csv]
time_step_interval = 3
type = CSV
[]
[]
(modules/porous_flow/examples/thm_example/2D.i)
# Two phase, temperature-dependent, with mechanics, radial with fine mesh, constant injection of cold co2 into a overburden-reservoir-underburden containing mostly water
# species=0 is water
# species=1 is co2
# phase=0 is liquid, and since massfrac_ph0_sp0 = 1, this is all water
# phase=1 is gas, and since massfrac_ph1_sp0 = 0, this is all co2
#
# The mesh used below has very high resolution, so the simulation takes a long time to complete.
# Some suggested meshes of different resolution:
# nx=50, bias_x=1.2
# nx=100, bias_x=1.1
# nx=200, bias_x=1.05
# nx=400, bias_x=1.02
# nx=1000, bias_x=1.01
# nx=2000, bias_x=1.003
[Mesh]
type = GeneratedMesh
dim = 2
nx = 2000
bias_x = 1.003
xmin = 0.1
xmax = 5000
ny = 1
ymin = 0
ymax = 11
[]
[Problem]
coord_type = RZ
[]
[GlobalParams]
displacements = 'disp_r disp_z'
PorousFlowDictator = dictator
gravity = '0 0 0'
biot_coefficient = 1.0
[]
[Variables]
[pwater]
initial_condition = 18.3e6
[]
[sgas]
initial_condition = 0.0
[]
[temp]
initial_condition = 358
[]
[disp_r]
[]
[]
[AuxVariables]
[rate]
[]
[disp_z]
[]
[massfrac_ph0_sp0]
initial_condition = 1 # all H20 in phase=0
[]
[massfrac_ph1_sp0]
initial_condition = 0 # no H2O in phase=1
[]
[pgas]
family = MONOMIAL
order = FIRST
[]
[swater]
family = MONOMIAL
order = FIRST
[]
[stress_rr]
order = CONSTANT
family = MONOMIAL
[]
[stress_tt]
order = CONSTANT
family = MONOMIAL
[]
[stress_zz]
order = CONSTANT
family = MONOMIAL
[]
[]
[Kernels]
[mass_water_dot]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pwater
[]
[flux_water]
type = PorousFlowAdvectiveFlux
fluid_component = 0
use_displaced_mesh = false
variable = pwater
[]
[mass_co2_dot]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = sgas
[]
[flux_co2]
type = PorousFlowAdvectiveFlux
fluid_component = 1
use_displaced_mesh = false
variable = sgas
[]
[energy_dot]
type = PorousFlowEnergyTimeDerivative
variable = temp
[]
[advection]
type = PorousFlowHeatAdvection
use_displaced_mesh = false
variable = temp
[]
[conduction]
type = PorousFlowExponentialDecay
use_displaced_mesh = false
variable = temp
reference = 358
rate = rate
[]
[grad_stress_r]
type = StressDivergenceRZTensors
temperature = temp
eigenstrain_names = thermal_contribution
variable = disp_r
use_displaced_mesh = false
component = 0
[]
[poro_r]
type = PorousFlowEffectiveStressCoupling
variable = disp_r
use_displaced_mesh = false
component = 0
[]
[]
[AuxKernels]
[rate]
type = FunctionAux
variable = rate
execute_on = timestep_begin
function = decay_rate
[]
[pgas]
type = PorousFlowPropertyAux
property = pressure
phase = 1
variable = pgas
[]
[swater]
type = PorousFlowPropertyAux
property = saturation
phase = 0
variable = swater
[]
[stress_rr]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_rr
index_i = 0
index_j = 0
[]
[stress_tt]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_tt
index_i = 2
index_j = 2
[]
[stress_zz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_zz
index_i = 1
index_j = 1
[]
[]
[Functions]
[decay_rate]
# Eqn(26) of the first paper of LaForce et al.
# Ka * (rho C)_a = 10056886.914
# h = 11
type = ParsedFunction
expression = 'sqrt(10056886.914/t)/11.0'
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'temp pwater sgas disp_r'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureConst
pc = 0
[]
[]
[FluidProperties]
[water]
type = SimpleFluidProperties
bulk_modulus = 2.27e14
density0 = 970.0
viscosity = 0.3394e-3
cv = 4149.0
cp = 4149.0
porepressure_coefficient = 0.0
thermal_expansion = 0
[]
[co2]
type = SimpleFluidProperties
bulk_modulus = 2.27e14
density0 = 516.48
viscosity = 0.0393e-3
cv = 2920.5
cp = 2920.5
porepressure_coefficient = 0.0
thermal_expansion = 0
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = temp
[]
[ppss]
type = PorousFlow2PhasePS
phase0_porepressure = pwater
phase1_saturation = sgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph1_sp0'
[]
[water]
type = PorousFlowSingleComponentFluid
fp = water
phase = 0
[]
[gas]
type = PorousFlowSingleComponentFluid
fp = co2
phase = 1
[]
[porosity_reservoir]
type = PorousFlowPorosityConst
porosity = 0.2
[]
[permeability_reservoir]
type = PorousFlowPermeabilityConst
permeability = '2e-12 0 0 0 0 0 0 0 0'
[]
[relperm_liquid]
type = PorousFlowRelativePermeabilityCorey
n = 4
phase = 0
s_res = 0.200
sum_s_res = 0.405
[]
[relperm_gas]
type = PorousFlowRelativePermeabilityBC
phase = 1
s_res = 0.205
sum_s_res = 0.405
nw_phase = true
lambda = 2
[]
[thermal_conductivity_reservoir]
type = PorousFlowThermalConductivityIdeal
dry_thermal_conductivity = '0 0 0 0 1.320 0 0 0 0'
wet_thermal_conductivity = '0 0 0 0 3.083 0 0 0 0'
[]
[internal_energy_reservoir]
type = PorousFlowMatrixInternalEnergy
specific_heat_capacity = 1100
density = 2350.0
[]
[elasticity_tensor]
type = ComputeIsotropicElasticityTensor
shear_modulus = 6.0E9
poissons_ratio = 0.2
[]
[strain]
type = ComputeAxisymmetricRZSmallStrain
eigenstrain_names = 'thermal_contribution ini_stress'
[]
[ini_strain]
type = ComputeEigenstrainFromInitialStress
initial_stress = '-12.8E6 0 0 0 -51.3E6 0 0 0 -12.8E6'
eigenstrain_name = ini_stress
[]
[thermal_contribution]
type = ComputeThermalExpansionEigenstrain
temperature = temp
stress_free_temperature = 358
thermal_expansion_coeff = 5E-6
eigenstrain_name = thermal_contribution
[]
[stress]
type = ComputeLinearElasticStress
[]
[eff_fluid_pressure]
type = PorousFlowEffectiveFluidPressure
[]
[vol_strain]
type = PorousFlowVolumetricStrain
[]
[]
[BCs]
[outer_pressure_fixed]
type = DirichletBC
boundary = right
value = 18.3e6
variable = pwater
[]
[outer_saturation_fixed]
type = DirichletBC
boundary = right
value = 0.0
variable = sgas
[]
[outer_temp_fixed]
type = DirichletBC
boundary = right
value = 358
variable = temp
[]
[fixed_outer_r]
type = DirichletBC
variable = disp_r
value = 0
boundary = right
[]
[co2_injection]
type = PorousFlowSink
boundary = left
variable = sgas
use_mobility = false
use_relperm = false
fluid_phase = 1
flux_function = 'min(t/100.0,1)*(-2.294001475)' # 5.0E5 T/year = 15.855 kg/s, over area of 2Pi*0.1*11
[]
[cold_co2]
type = DirichletBC
boundary = left
variable = temp
value = 294
[]
[cavity_pressure_x]
type = Pressure
boundary = left
variable = disp_r
component = 0
postprocessor = p_bh # note, this lags
use_displaced_mesh = false
[]
[]
[Postprocessors]
[p_bh]
type = PointValue
variable = pwater
point = '0.1 0 0'
execute_on = timestep_begin
use_displaced_mesh = false
[]
[]
[VectorPostprocessors]
[ptsuss]
type = LineValueSampler
use_displaced_mesh = false
start_point = '0.1 0 0'
end_point = '5000 0 0'
sort_by = x
num_points = 50000
outputs = csv
variable = 'pwater temp sgas disp_r stress_rr stress_tt'
[]
[]
[Preconditioning]
active = 'smp'
[smp]
type = SMP
full = true
#petsc_options = '-snes_converged_reason -ksp_diagonal_scale -ksp_diagonal_scale_fix -ksp_gmres_modifiedgramschmidt -snes_linesearch_monitor'
petsc_options_iname = '-ksp_type -pc_type -sub_pc_type -sub_pc_factor_shift_type -pc_asm_overlap -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'gmres asm lu NONZERO 2 1E2 1E-5 500'
[]
[mumps]
type = SMP
full = true
petsc_options = '-snes_converged_reason -ksp_diagonal_scale -ksp_diagonal_scale_fix -ksp_gmres_modifiedgramschmidt -snes_linesearch_monitor'
petsc_options_iname = '-ksp_type -pc_type -pc_factor_mat_solver_package -pc_factor_shift_type -snes_rtol -snes_atol -snes_max_it'
petsc_options_value = 'gmres lu mumps NONZERO 1E-5 1E2 50'
[]
[]
[Executioner]
type = Transient
solve_type = NEWTON
end_time = 1.5768e8
#dtmax = 1e6
[TimeStepper]
type = IterationAdaptiveDT
dt = 1
growth_factor = 1.1
[]
[]
[Outputs]
print_linear_residuals = false
sync_times = '3600 86400 2.592E6 1.5768E8'
perf_graph = true
exodus = true
[csv]
type = CSV
sync_only = true
[]
[]
(modules/porous_flow/examples/tutorial/11_2D.i)
# Two-phase borehole injection problem in RZ coordinates
[Mesh]
[gen]
type = GeneratedMeshGenerator
dim = 2
nx = 10
xmin = 1.0
xmax = 10
bias_x = 1.4
ny = 3
ymin = -6
ymax = 6
[]
[aquifer]
input = gen
type = SubdomainBoundingBoxGenerator
block_id = 1
bottom_left = '0 -2 0'
top_right = '10 2 0'
[]
[injection_area]
type = ParsedGenerateSideset
combinatorial_geometry = 'x<1.0001'
included_subdomains = 1
new_sideset_name = 'injection_area'
input = 'aquifer'
[]
[rename]
type = RenameBlockGenerator
old_block = '0 1'
new_block = 'caps aquifer'
input = 'injection_area'
[]
coord_type = RZ
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pwater pgas T disp_r'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
alpha = 1E-6
m = 0.6
[]
[]
[GlobalParams]
displacements = 'disp_r disp_z'
gravity = '0 0 0'
biot_coefficient = 1.0
PorousFlowDictator = dictator
[]
[Variables]
[pwater]
initial_condition = 20E6
[]
[pgas]
initial_condition = 20.1E6
[]
[T]
initial_condition = 330
scaling = 1E-5
[]
[disp_r]
scaling = 1E-5
[]
[]
[Kernels]
[mass_water_dot]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pwater
[]
[flux_water]
type = PorousFlowAdvectiveFlux
fluid_component = 0
use_displaced_mesh = false
variable = pwater
[]
[vol_strain_rate_water]
type = PorousFlowMassVolumetricExpansion
fluid_component = 0
variable = pwater
[]
[mass_co2_dot]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = pgas
[]
[flux_co2]
type = PorousFlowAdvectiveFlux
fluid_component = 1
use_displaced_mesh = false
variable = pgas
[]
[vol_strain_rate_co2]
type = PorousFlowMassVolumetricExpansion
fluid_component = 1
variable = pgas
[]
[energy_dot]
type = PorousFlowEnergyTimeDerivative
variable = T
[]
[advection]
type = PorousFlowHeatAdvection
use_displaced_mesh = false
variable = T
[]
[conduction]
type = PorousFlowHeatConduction
use_displaced_mesh = false
variable = T
[]
[vol_strain_rate_heat]
type = PorousFlowHeatVolumetricExpansion
variable = T
[]
[grad_stress_r]
type = StressDivergenceRZTensors
temperature = T
variable = disp_r
eigenstrain_names = thermal_contribution
use_displaced_mesh = false
component = 0
[]
[poro_r]
type = PorousFlowEffectiveStressCoupling
variable = disp_r
use_displaced_mesh = false
component = 0
[]
[]
[AuxVariables]
[disp_z]
[]
[effective_fluid_pressure]
family = MONOMIAL
order = CONSTANT
[]
[mass_frac_phase0_species0]
initial_condition = 1 # all water in phase=0
[]
[mass_frac_phase1_species0]
initial_condition = 0 # no water in phase=1
[]
[sgas]
family = MONOMIAL
order = CONSTANT
[]
[swater]
family = MONOMIAL
order = CONSTANT
[]
[stress_rr]
family = MONOMIAL
order = CONSTANT
[]
[stress_tt]
family = MONOMIAL
order = CONSTANT
[]
[stress_zz]
family = MONOMIAL
order = CONSTANT
[]
[porosity]
family = MONOMIAL
order = CONSTANT
[]
[]
[AuxKernels]
[effective_fluid_pressure]
type = ParsedAux
coupled_variables = 'pwater pgas swater sgas'
expression = 'pwater * swater + pgas * sgas'
variable = effective_fluid_pressure
[]
[swater]
type = PorousFlowPropertyAux
variable = swater
property = saturation
phase = 0
execute_on = timestep_end
[]
[sgas]
type = PorousFlowPropertyAux
variable = sgas
property = saturation
phase = 1
execute_on = timestep_end
[]
[stress_rr_aux]
type = RankTwoAux
variable = stress_rr
rank_two_tensor = stress
index_i = 0
index_j = 0
[]
[stress_tt]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_tt
index_i = 2
index_j = 2
[]
[stress_zz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_zz
index_i = 1
index_j = 1
[]
[porosity]
type = PorousFlowPropertyAux
variable = porosity
property = porosity
execute_on = timestep_end
[]
[]
[BCs]
[pinned_top_bottom_r]
type = DirichletBC
variable = disp_r
value = 0
boundary = 'top bottom'
[]
[cavity_pressure_r]
type = Pressure
boundary = injection_area
variable = disp_r
postprocessor = constrained_effective_fluid_pressure_at_wellbore
use_displaced_mesh = false
[]
[cold_co2]
type = DirichletBC
boundary = injection_area
variable = T
value = 290 # injection temperature
use_displaced_mesh = false
[]
[constant_co2_injection]
type = PorousFlowSink
boundary = injection_area
variable = pgas
fluid_phase = 1
flux_function = -1E-4
use_displaced_mesh = false
[]
[outer_water_removal]
type = PorousFlowPiecewiseLinearSink
boundary = right
variable = pwater
fluid_phase = 0
pt_vals = '0 1E9'
multipliers = '0 1E8'
PT_shift = 20E6
use_mobility = true
use_relperm = true
use_displaced_mesh = false
[]
[outer_co2_removal]
type = PorousFlowPiecewiseLinearSink
boundary = right
variable = pgas
fluid_phase = 1
pt_vals = '0 1E9'
multipliers = '0 1E8'
PT_shift = 20.1E6
use_mobility = true
use_relperm = true
use_displaced_mesh = false
[]
[]
[FluidProperties]
[true_water]
type = Water97FluidProperties
[]
[tabulated_water]
type = TabulatedBicubicFluidProperties
fp = true_water
temperature_min = 275
pressure_max = 1E8
fluid_property_file = water97_tabulated_11.csv
[]
[true_co2]
type = CO2FluidProperties
[]
[tabulated_co2]
type = TabulatedBicubicFluidProperties
fp = true_co2
temperature_min = 275
pressure_max = 1E8
fluid_property_file = co2_tabulated_11.csv
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = T
[]
[saturation_calculator]
type = PorousFlow2PhasePP
phase0_porepressure = pwater
phase1_porepressure = pgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'mass_frac_phase0_species0 mass_frac_phase1_species0'
[]
[water]
type = PorousFlowSingleComponentFluid
fp = tabulated_water
phase = 0
[]
[co2]
type = PorousFlowSingleComponentFluid
fp = tabulated_co2
phase = 1
[]
[relperm_water]
type = PorousFlowRelativePermeabilityCorey
n = 4
s_res = 0.1
sum_s_res = 0.2
phase = 0
[]
[relperm_co2]
type = PorousFlowRelativePermeabilityBC
nw_phase = true
lambda = 2
s_res = 0.1
sum_s_res = 0.2
phase = 1
[]
[porosity]
type = PorousFlowPorosity
fluid = true
mechanical = true
thermal = true
porosity_zero = 0.1
reference_temperature = 330
reference_porepressure = 20E6
thermal_expansion_coeff = 15E-6 # volumetric
solid_bulk = 8E9 # unimportant since biot = 1
[]
[permeability_aquifer]
type = PorousFlowPermeabilityKozenyCarman
block = aquifer
poroperm_function = kozeny_carman_phi0
phi0 = 0.1
n = 2
m = 2
k0 = 1E-12
[]
[permeability_caps]
type = PorousFlowPermeabilityKozenyCarman
block = caps
poroperm_function = kozeny_carman_phi0
phi0 = 0.1
n = 2
m = 2
k0 = 1E-15
k_anisotropy = '1 0 0 0 1 0 0 0 0.1'
[]
[rock_thermal_conductivity]
type = PorousFlowThermalConductivityIdeal
dry_thermal_conductivity = '2 0 0 0 2 0 0 0 2'
[]
[rock_internal_energy]
type = PorousFlowMatrixInternalEnergy
specific_heat_capacity = 1100
density = 2300
[]
[elasticity_tensor]
type = ComputeIsotropicElasticityTensor
youngs_modulus = 5E9
poissons_ratio = 0.0
[]
[strain]
type = ComputeAxisymmetricRZSmallStrain
eigenstrain_names = 'thermal_contribution initial_stress'
[]
[thermal_contribution]
type = ComputeThermalExpansionEigenstrain
temperature = T
thermal_expansion_coeff = 5E-6 # this is the linear thermal expansion coefficient
eigenstrain_name = thermal_contribution
stress_free_temperature = 330
[]
[initial_strain]
type = ComputeEigenstrainFromInitialStress
initial_stress = '20E6 0 0 0 20E6 0 0 0 20E6'
eigenstrain_name = initial_stress
[]
[stress]
type = ComputeLinearElasticStress
[]
[effective_fluid_pressure]
type = PorousFlowEffectiveFluidPressure
[]
[volumetric_strain]
type = PorousFlowVolumetricStrain
[]
[]
[Postprocessors]
[effective_fluid_pressure_at_wellbore]
type = PointValue
variable = effective_fluid_pressure
point = '1 0 0'
execute_on = timestep_begin
use_displaced_mesh = false
[]
[constrained_effective_fluid_pressure_at_wellbore]
type = FunctionValuePostprocessor
function = constrain_effective_fluid_pressure
execute_on = timestep_begin
[]
[]
[Functions]
[constrain_effective_fluid_pressure]
type = ParsedFunction
symbol_names = effective_fluid_pressure_at_wellbore
symbol_values = effective_fluid_pressure_at_wellbore
expression = 'max(effective_fluid_pressure_at_wellbore, 20E6)'
[]
[]
[Preconditioning]
active = basic
[basic]
type = SMP
full = true
petsc_options = '-ksp_diagonal_scale -ksp_diagonal_scale_fix'
petsc_options_iname = '-pc_type -sub_pc_type -sub_pc_factor_shift_type -pc_asm_overlap'
petsc_options_value = ' asm lu NONZERO 2'
[]
[preferred_but_might_not_be_installed]
type = SMP
full = true
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = ' lu mumps'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
end_time = 1E3
[TimeStepper]
type = IterationAdaptiveDT
dt = 1E3
growth_factor = 1.2
optimal_iterations = 10
[]
nl_abs_tol = 1E-7
[]
[Outputs]
exodus = true
[]
(modules/porous_flow/test/tests/fluidstate/theis_tabulated.i)
# Two phase Theis problem: Flow from single source using WaterNCG fluidstate.
# Constant rate injection 2 kg/s
# 1D cylindrical mesh
# Initially, system has only a liquid phase, until enough gas is injected
# to form a gas phase, in which case the system becomes two phase.
# Note: this test is the same as theis.i, but uses the tabulated version of the CO2FluidProperties
[Mesh]
type = GeneratedMesh
dim = 1
nx = 80
xmax = 200
bias_x = 1.05
coord_type = RZ
rz_coord_axis = Y
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[AuxVariables]
[saturation_gas]
order = CONSTANT
family = MONOMIAL
[]
[x1]
order = CONSTANT
family = MONOMIAL
[]
[y0]
order = CONSTANT
family = MONOMIAL
[]
[]
[AuxKernels]
[saturation_gas]
type = PorousFlowPropertyAux
variable = saturation_gas
property = saturation
phase = 1
execute_on = timestep_end
[]
[x1]
type = PorousFlowPropertyAux
variable = x1
property = mass_fraction
phase = 0
fluid_component = 1
execute_on = timestep_end
[]
[y0]
type = PorousFlowPropertyAux
variable = y0
property = mass_fraction
phase = 1
fluid_component = 0
execute_on = timestep_end
[]
[]
[Variables]
[pgas]
initial_condition = 20e6
[]
[zi]
initial_condition = 0
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pgas
[]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = pgas
[]
[mass1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = zi
[]
[flux1]
type = PorousFlowAdvectiveFlux
fluid_component = 1
variable = zi
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pgas zi'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureConst
pc = 0
[]
[fs]
type = PorousFlowWaterNCG
water_fp = water
gas_fp = tabulated
capillary_pressure = pc
[]
[]
[FluidProperties]
[co2]
type = CO2FluidProperties
[]
[tabulated]
type = TabulatedBicubicFluidProperties
fp = co2
fluid_property_file = fluid_properties.csv
[]
[water]
type = Water97FluidProperties
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = 20
[]
[waterncg]
type = PorousFlowFluidState
gas_porepressure = pgas
z = zi
temperature_unit = Celsius
capillary_pressure = pc
fluid_state = fs
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.2
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-12 0 0 0 1e-12 0 0 0 1e-12'
[]
[relperm_water]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
s_res = 0.1
sum_s_res = 0.1
[]
[relperm_gas]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 1
[]
[]
[BCs]
[rightwater]
type = DirichletBC
boundary = right
value = 20e6
variable = pgas
[]
[]
[DiracKernels]
[source]
type = PorousFlowSquarePulsePointSource
point = '0 0 0'
mass_flux = 2
variable = zi
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
petsc_options = '-snes_converged_reason -ksp_diagonal_scale -ksp_diagonal_scale_fix -ksp_gmres_modifiedgramschmidt -snes_linesearch_monitor'
petsc_options_iname = '-ksp_type -pc_type -sub_pc_type -sub_pc_factor_shift_type -pc_asm_overlap -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'gmres asm lu NONZERO 2 1E-8 1E-10 20'
[]
[]
[Executioner]
type = Transient
solve_type = NEWTON
end_time = 8e2
[TimeStepper]
type = IterationAdaptiveDT
dt = 2
growth_factor = 2
[]
[]
[VectorPostprocessors]
[line]
type = LineValueSampler
warn_discontinuous_face_values = false
sort_by = x
start_point = '0 0 0'
end_point = '200 0 0'
num_points = 1000
variable = 'pgas zi x1 saturation_gas'
execute_on = 'timestep_end'
[]
[]
[Postprocessors]
[pgas]
type = PointValue
point = '1 0 0'
variable = pgas
[]
[sgas]
type = PointValue
point = '1 0 0'
variable = saturation_gas
[]
[zi]
type = PointValue
point = '1 0 0'
variable = zi
[]
[massgas]
type = PorousFlowFluidMass
fluid_component = 1
[]
[x1]
type = PointValue
point = '1 0 0'
variable = x1
[]
[y0]
type = PointValue
point = '1 0 0'
variable = y0
[]
[]
[Outputs]
print_linear_residuals = false
perf_graph = true
[csvout]
type = CSV
file_base = theis_tabulated_csvout
execute_on = timestep_end
execute_vector_postprocessors_on = final
[]
[]
(modules/porous_flow/test/tests/jacobian/line_sink01.i)
# PorousFlowPeacemanBorehole with 2-phase, 3-components, with enthalpy, internal_energy, and thermal_conductivity
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 1
xmin = -1
xmax = 1
ymin = -1
ymax = 1
zmin = -1
zmax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[ppwater]
[]
[ppgas]
[]
[massfrac_ph0_sp0]
[]
[massfrac_ph0_sp1]
[]
[massfrac_ph1_sp0]
[]
[massfrac_ph1_sp1]
[]
[temp]
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'temp ppwater ppgas massfrac_ph0_sp0 massfrac_ph0_sp1 massfrac_ph1_sp0 massfrac_ph1_sp1'
number_fluid_phases = 2
number_fluid_components = 3
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[dummy_outflow0]
type = PorousFlowSumQuantity
[]
[dummy_outflow1]
type = PorousFlowSumQuantity
[]
[dummy_outflow2]
type = PorousFlowSumQuantity
[]
[dummy_outflow3]
type = PorousFlowSumQuantity
[]
[dummy_outflow4]
type = PorousFlowSumQuantity
[]
[dummy_outflow5]
type = PorousFlowSumQuantity
[]
[dummy_outflow6]
type = PorousFlowSumQuantity
[]
[dummy_outflow7]
type = PorousFlowSumQuantity
[]
[]
[ICs]
[temp]
type = RandomIC
variable = temp
min = 1
max = 2
[]
[ppwater]
type = RandomIC
variable = ppwater
min = -1
max = 0
[]
[ppgas]
type = RandomIC
variable = ppgas
min = 0
max = 1
[]
[massfrac_ph0_sp0]
type = RandomIC
variable = massfrac_ph0_sp0
min = 0
max = 1
[]
[massfrac_ph0_sp1]
type = RandomIC
variable = massfrac_ph0_sp1
min = 0
max = 1
[]
[massfrac_ph1_sp0]
type = RandomIC
variable = massfrac_ph1_sp0
min = 0
max = 1
[]
[massfrac_ph1_sp1]
type = RandomIC
variable = massfrac_ph1_sp1
min = 0
max = 1
[]
[]
[Kernels]
[dummy_temp]
type = TimeDerivative
variable = temp
[]
[dummy_ppwater]
type = TimeDerivative
variable = ppwater
[]
[dummy_ppgas]
type = TimeDerivative
variable = ppgas
[]
[dummy_m00]
type = TimeDerivative
variable = massfrac_ph0_sp0
[]
[dummy_m01]
type = TimeDerivative
variable = massfrac_ph0_sp1
[]
[dummy_m10]
type = TimeDerivative
variable = massfrac_ph1_sp0
[]
[dummy_m11]
type = TimeDerivative
variable = massfrac_ph1_sp1
[]
[]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 1.5
density0 = 1
thermal_expansion = 0
viscosity = 1
cv = 1.1
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 0.5
density0 = 0.5
thermal_expansion = 0
viscosity = 1.4
cv = 1.8
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = temp
[]
[ppss]
type = PorousFlow2PhasePP
phase0_porepressure = ppwater
phase1_porepressure = ppgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph0_sp1 massfrac_ph1_sp0 massfrac_ph1_sp1'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 2 0 0 0 3'
[]
[relperm0]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[relperm1]
type = PorousFlowRelativePermeabilityCorey
n = 3
phase = 1
[]
[thermal_conductivity]
type = PorousFlowThermalConductivityIdeal
dry_thermal_conductivity = '0.1 0.02 0.03 0.02 0.0 0.01 0.03 0.01 0.3'
[]
[]
[DiracKernels]
[dirac0]
type = PorousFlowPeacemanBorehole
fluid_phase = 0
variable = ppwater
point_file = one_point.bh
line_length = 1
SumQuantityUO = dummy_outflow0
character = 1
bottom_p_or_t = -10
unit_weight = '1 2 3'
re_constant = 0.123
[]
[dirac1]
type = PorousFlowPeacemanBorehole
fluid_phase = 1
variable = ppgas
line_length = 1
line_direction = '-1 -1 -1'
use_relative_permeability = true
point_file = one_point.bh
SumQuantityUO = dummy_outflow1
character = -0.5
bottom_p_or_t = 10
unit_weight = '1 2 -3'
re_constant = 0.3
[]
[dirac2]
type = PorousFlowPeacemanBorehole
fluid_phase = 0
variable = massfrac_ph0_sp0
line_length = 1.3
line_direction = '1 0 1'
use_mobility = true
point_file = one_point.bh
SumQuantityUO = dummy_outflow2
character = 0.6
bottom_p_or_t = -4
unit_weight = '-1 -2 -3'
re_constant = 0.4
[]
[dirac3]
type = PorousFlowPeacemanBorehole
fluid_phase = 0
variable = massfrac_ph0_sp1
line_length = 1.3
line_direction = '1 1 1'
use_enthalpy = true
mass_fraction_component = 0
point_file = one_point.bh
SumQuantityUO = dummy_outflow3
character = -1
bottom_p_or_t = 3
unit_weight = '0.1 0.2 0.3'
re_constant = 0.5
[]
[dirac4]
type = PorousFlowPeacemanBorehole
fluid_phase = 1
variable = massfrac_ph1_sp0
function_of = temperature
line_length = 0.9
line_direction = '1 1 1'
mass_fraction_component = 1
use_internal_energy = true
point_file = one_point.bh
SumQuantityUO = dummy_outflow4
character = 1.1
bottom_p_or_t = -7
unit_weight = '-1 2 3'
re_constant = 0.6
[]
[dirac5]
type = PorousFlowPeacemanBorehole
fluid_phase = 1
variable = temp
line_length = 0.9
function_of = temperature
line_direction = '1 2 3'
mass_fraction_component = 2
use_internal_energy = true
point_file = one_point.bh
SumQuantityUO = dummy_outflow5
character = 0.9
bottom_p_or_t = -8
unit_weight = '1 2 1'
re_constant = 0.7
[]
[dirac6]
type = PorousFlowPeacemanBorehole
fluid_phase = 0
variable = ppwater
point_file = one_point.bh
SumQuantityUO = dummy_outflow6
character = 0
bottom_p_or_t = 10
unit_weight = '0.0 0.0 0.0'
[]
[dirac7]
type = PorousFlowPeacemanBorehole
fluid_phase = 1
variable = massfrac_ph0_sp0
use_mobility = true
mass_fraction_component = 1
use_relative_permeability = true
use_internal_energy = true
point_file = one_point.bh
SumQuantityUO = dummy_outflow7
character = -1
bottom_p_or_t = 10
unit_weight = '0.1 0.2 0.3'
[]
[]
[Preconditioning]
[check]
type = SMP
full = true
#petsc_options = '-snes_test_display'
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -snes_type'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000 test'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
[Outputs]
file_base = line_sink01
[]
(modules/porous_flow/test/tests/basic_advection/2phase.i)
# Basic advection of u in a 2-phase situation
#
# grad(P) = -2
# density * gravity = 4 * 0.25
# grad(P) - density * gravity = -3
# permeability = 10
# relative permeability = 0.5
# viscosity = 150
# so Darcy velocity = 0.1
[Mesh]
type = GeneratedMesh
dim = 1
nx = 10
xmin = 0
xmax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[u]
[]
[]
[AuxVariables]
[P0]
[]
[P1]
[]
[]
[ICs]
[P0]
type = FunctionIC
variable = P0
function = '0'
[]
[P1]
type = FunctionIC
variable = P1
function = '2*(1-x)'
[]
[u]
type = FunctionIC
variable = u
function = 'if(x<0.1,1,0)'
[]
[]
[Kernels]
[u_dot]
type = TimeDerivative
variable = u
[]
[u_advection]
type = PorousFlowBasicAdvection
variable = u
phase = 1
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = ''
number_fluid_phases = 2
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureConst
[]
[]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
density0 = 32
viscosity = 123
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 2e9
density0 = 4
thermal_expansion = 0
viscosity = 150.0
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePP
phase0_porepressure = P0
phase1_porepressure = P1
capillary_pressure = pc
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '10 0 0 0 10 0 0 0 10'
[]
[relperm0]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[relperm1]
type = PorousFlowRelativePermeabilityConst
kr = 0.5
phase = 1
[]
[darcy_velocity]
type = PorousFlowDarcyVelocityMaterial
gravity = '0.25 0 0'
[]
[]
[BCs]
[left]
type = DirichletBC
boundary = left
value = 1
variable = u
[]
[right]
type = DirichletBC
boundary = right
value = 0
variable = u
[]
[]
[Preconditioning]
[basic]
type = SMP
full = true
petsc_options_iname = '-pc_type -snes_rtol'
petsc_options_value = ' lu 1E-10'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 5
[]
[Outputs]
exodus = true
print_linear_residuals = false
[]
(modules/porous_flow/examples/tutorial/11.i)
# Two-phase borehole injection problem
[Mesh]
[annular]
type = AnnularMeshGenerator
nr = 10
rmin = 1.0
rmax = 10
growth_r = 1.4
nt = 4
dmin = 0
dmax = 90
[]
[make3D]
input = annular
type = MeshExtruderGenerator
extrusion_vector = '0 0 12'
num_layers = 3
bottom_sideset = 'bottom'
top_sideset = 'top'
[]
[shift_down]
type = TransformGenerator
transform = TRANSLATE
vector_value = '0 0 -6'
input = make3D
[]
[aquifer]
type = SubdomainBoundingBoxGenerator
block_id = 1
bottom_left = '0 0 -2'
top_right = '10 10 2'
input = shift_down
[]
[injection_area]
type = ParsedGenerateSideset
combinatorial_geometry = 'x*x+y*y<1.01'
included_subdomains = 1
new_sideset_name = 'injection_area'
input = 'aquifer'
[]
[rename]
type = RenameBlockGenerator
old_block = '0 1'
new_block = 'caps aquifer'
input = 'injection_area'
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pwater pgas T disp_x disp_y'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
alpha = 1E-6
m = 0.6
[]
[]
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
gravity = '0 0 0'
biot_coefficient = 1.0
PorousFlowDictator = dictator
[]
[Variables]
[pwater]
initial_condition = 20E6
[]
[pgas]
initial_condition = 20.1E6
[]
[T]
initial_condition = 330
scaling = 1E-5
[]
[disp_x]
scaling = 1E-5
[]
[disp_y]
scaling = 1E-5
[]
[]
[Kernels]
[mass_water_dot]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pwater
[]
[flux_water]
type = PorousFlowAdvectiveFlux
fluid_component = 0
use_displaced_mesh = false
variable = pwater
[]
[vol_strain_rate_water]
type = PorousFlowMassVolumetricExpansion
fluid_component = 0
variable = pwater
[]
[mass_co2_dot]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = pgas
[]
[flux_co2]
type = PorousFlowAdvectiveFlux
fluid_component = 1
use_displaced_mesh = false
variable = pgas
[]
[vol_strain_rate_co2]
type = PorousFlowMassVolumetricExpansion
fluid_component = 1
variable = pgas
[]
[energy_dot]
type = PorousFlowEnergyTimeDerivative
variable = T
[]
[advection]
type = PorousFlowHeatAdvection
use_displaced_mesh = false
variable = T
[]
[conduction]
type = PorousFlowHeatConduction
use_displaced_mesh = false
variable = T
[]
[vol_strain_rate_heat]
type = PorousFlowHeatVolumetricExpansion
variable = T
[]
[grad_stress_x]
type = StressDivergenceTensors
temperature = T
variable = disp_x
eigenstrain_names = thermal_contribution
use_displaced_mesh = false
component = 0
[]
[poro_x]
type = PorousFlowEffectiveStressCoupling
variable = disp_x
use_displaced_mesh = false
component = 0
[]
[grad_stress_y]
type = StressDivergenceTensors
temperature = T
variable = disp_y
eigenstrain_names = thermal_contribution
use_displaced_mesh = false
component = 1
[]
[poro_y]
type = PorousFlowEffectiveStressCoupling
variable = disp_y
use_displaced_mesh = false
component = 1
[]
[]
[AuxVariables]
[disp_z]
[]
[effective_fluid_pressure]
family = MONOMIAL
order = CONSTANT
[]
[mass_frac_phase0_species0]
initial_condition = 1 # all water in phase=0
[]
[mass_frac_phase1_species0]
initial_condition = 0 # no water in phase=1
[]
[sgas]
family = MONOMIAL
order = CONSTANT
[]
[swater]
family = MONOMIAL
order = CONSTANT
[]
[stress_rr]
family = MONOMIAL
order = CONSTANT
[]
[stress_tt]
family = MONOMIAL
order = CONSTANT
[]
[stress_zz]
family = MONOMIAL
order = CONSTANT
[]
[porosity]
family = MONOMIAL
order = CONSTANT
[]
[]
[AuxKernels]
[effective_fluid_pressure]
type = ParsedAux
coupled_variables = 'pwater pgas swater sgas'
expression = 'pwater * swater + pgas * sgas'
variable = effective_fluid_pressure
[]
[swater]
type = PorousFlowPropertyAux
variable = swater
property = saturation
phase = 0
execute_on = timestep_end
[]
[sgas]
type = PorousFlowPropertyAux
variable = sgas
property = saturation
phase = 1
execute_on = timestep_end
[]
[stress_rr]
type = RankTwoScalarAux
variable = stress_rr
rank_two_tensor = stress
scalar_type = RadialStress
point1 = '0 0 0'
point2 = '0 0 1'
execute_on = timestep_end
[]
[stress_tt]
type = RankTwoScalarAux
variable = stress_tt
rank_two_tensor = stress
scalar_type = HoopStress
point1 = '0 0 0'
point2 = '0 0 1'
execute_on = timestep_end
[]
[stress_zz]
type = RankTwoAux
variable = stress_zz
rank_two_tensor = stress
index_i = 2
index_j = 2
execute_on = timestep_end
[]
[porosity]
type = PorousFlowPropertyAux
variable = porosity
property = porosity
execute_on = timestep_end
[]
[]
[BCs]
[roller_tmax]
type = DirichletBC
variable = disp_x
value = 0
boundary = dmax
[]
[roller_tmin]
type = DirichletBC
variable = disp_y
value = 0
boundary = dmin
[]
[pinned_top_bottom_x]
type = DirichletBC
variable = disp_x
value = 0
boundary = 'top bottom'
[]
[pinned_top_bottom_y]
type = DirichletBC
variable = disp_y
value = 0
boundary = 'top bottom'
[]
[cavity_pressure_x]
type = Pressure
boundary = injection_area
variable = disp_x
component = 0
postprocessor = constrained_effective_fluid_pressure_at_wellbore
use_displaced_mesh = false
[]
[cavity_pressure_y]
type = Pressure
boundary = injection_area
variable = disp_y
component = 1
postprocessor = constrained_effective_fluid_pressure_at_wellbore
use_displaced_mesh = false
[]
[cold_co2]
type = DirichletBC
boundary = injection_area
variable = T
value = 290 # injection temperature
use_displaced_mesh = false
[]
[constant_co2_injection]
type = PorousFlowSink
boundary = injection_area
variable = pgas
fluid_phase = 1
flux_function = -1E-4
use_displaced_mesh = false
[]
[outer_water_removal]
type = PorousFlowPiecewiseLinearSink
boundary = rmax
variable = pwater
fluid_phase = 0
pt_vals = '0 1E9'
multipliers = '0 1E8'
PT_shift = 20E6
use_mobility = true
use_relperm = true
use_displaced_mesh = false
[]
[outer_co2_removal]
type = PorousFlowPiecewiseLinearSink
boundary = rmax
variable = pgas
fluid_phase = 1
pt_vals = '0 1E9'
multipliers = '0 1E8'
PT_shift = 20.1E6
use_mobility = true
use_relperm = true
use_displaced_mesh = false
[]
[]
[FluidProperties]
[true_water]
type = Water97FluidProperties
[]
[tabulated_water]
type = TabulatedFluidProperties
fp = true_water
temperature_min = 275
pressure_max = 1E8
interpolated_properties = 'density viscosity enthalpy internal_energy'
fluid_property_file = water97_tabulated_11.csv
[]
[true_co2]
type = CO2FluidProperties
[]
[tabulated_co2]
type = TabulatedFluidProperties
fp = true_co2
temperature_min = 275
pressure_max = 1E8
interpolated_properties = 'density viscosity enthalpy internal_energy'
fluid_property_file = co2_tabulated_11.csv
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = T
[]
[saturation_calculator]
type = PorousFlow2PhasePP
phase0_porepressure = pwater
phase1_porepressure = pgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'mass_frac_phase0_species0 mass_frac_phase1_species0'
[]
[water]
type = PorousFlowSingleComponentFluid
fp = tabulated_water
phase = 0
[]
[co2]
type = PorousFlowSingleComponentFluid
fp = tabulated_co2
phase = 1
[]
[relperm_water]
type = PorousFlowRelativePermeabilityCorey
n = 4
s_res = 0.1
sum_s_res = 0.2
phase = 0
[]
[relperm_co2]
type = PorousFlowRelativePermeabilityBC
nw_phase = true
lambda = 2
s_res = 0.1
sum_s_res = 0.2
phase = 1
[]
[porosity_mat]
type = PorousFlowPorosity
fluid = true
mechanical = true
thermal = true
porosity_zero = 0.1
reference_temperature = 330
reference_porepressure = 20E6
thermal_expansion_coeff = 15E-6 # volumetric
solid_bulk = 8E9 # unimportant since biot = 1
[]
[permeability_aquifer]
type = PorousFlowPermeabilityKozenyCarman
block = aquifer
poroperm_function = kozeny_carman_phi0
phi0 = 0.1
n = 2
m = 2
k0 = 1E-12
[]
[permeability_caps]
type = PorousFlowPermeabilityKozenyCarman
block = caps
poroperm_function = kozeny_carman_phi0
phi0 = 0.1
n = 2
m = 2
k0 = 1E-15
k_anisotropy = '1 0 0 0 1 0 0 0 0.1'
[]
[rock_thermal_conductivity]
type = PorousFlowThermalConductivityIdeal
dry_thermal_conductivity = '2 0 0 0 2 0 0 0 2'
[]
[rock_internal_energy]
type = PorousFlowMatrixInternalEnergy
specific_heat_capacity = 1100
density = 2300
[]
[elasticity_tensor]
type = ComputeIsotropicElasticityTensor
youngs_modulus = 5E9
poissons_ratio = 0.0
[]
[strain]
type = ComputeSmallStrain
eigenstrain_names = 'thermal_contribution initial_stress'
[]
[thermal_contribution]
type = ComputeThermalExpansionEigenstrain
temperature = T
thermal_expansion_coeff = 5E-6 # this is the linear thermal expansion coefficient
eigenstrain_name = thermal_contribution
stress_free_temperature = 330
[]
[initial_strain]
type = ComputeEigenstrainFromInitialStress
initial_stress = '20E6 0 0 0 20E6 0 0 0 20E6'
eigenstrain_name = initial_stress
[]
[stress]
type = ComputeLinearElasticStress
[]
[effective_fluid_pressure_mat]
type = PorousFlowEffectiveFluidPressure
[]
[volumetric_strain]
type = PorousFlowVolumetricStrain
[]
[]
[Postprocessors]
[effective_fluid_pressure_at_wellbore]
type = PointValue
variable = effective_fluid_pressure
point = '1 0 0'
execute_on = timestep_begin
use_displaced_mesh = false
[]
[constrained_effective_fluid_pressure_at_wellbore]
type = FunctionValuePostprocessor
function = constrain_effective_fluid_pressure
execute_on = timestep_begin
[]
[]
[Functions]
[constrain_effective_fluid_pressure]
type = ParsedFunction
symbol_names = effective_fluid_pressure_at_wellbore
symbol_values = effective_fluid_pressure_at_wellbore
expression = 'max(effective_fluid_pressure_at_wellbore, 20E6)'
[]
[]
[Preconditioning]
active = basic
[basic]
type = SMP
full = true
petsc_options = '-ksp_diagonal_scale -ksp_diagonal_scale_fix'
petsc_options_iname = '-pc_type -sub_pc_type -sub_pc_factor_shift_type -pc_asm_overlap'
petsc_options_value = ' asm lu NONZERO 2'
[]
[preferred_but_might_not_be_installed]
type = SMP
full = true
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = ' lu mumps'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
end_time = 1E3
[TimeStepper]
type = IterationAdaptiveDT
dt = 1E3
growth_factor = 1.2
optimal_iterations = 10
[]
nl_abs_tol = 1E-7
[]
[Outputs]
exodus = true
[]
(modules/porous_flow/test/tests/sinks/s01.i)
# apply a sink flux and observe the correct behavior
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 1
xmin = 0
xmax = 1
ymin = 0
ymax = 1
zmin = 0
zmax = 2
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[Variables]
[pp]
[]
[]
[ICs]
[pp]
type = FunctionIC
variable = pp
function = y+1
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1.3
density0 = 1.1
thermal_expansion = 0
viscosity = 1.1
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-5 0 0 0 1E-5 0 0 0 1E-5'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[]
[AuxVariables]
[flux_out]
[]
[xval]
[]
[yval]
[]
[]
[ICs]
[xval]
type = FunctionIC
variable = xval
function = x
[]
[yval]
type = FunctionIC
variable = yval
function = y
[]
[]
[Functions]
[mass00]
type = ParsedFunction
expression = 'vol*por*dens0*exp(pp/bulk)'
symbol_names = 'vol por dens0 pp bulk'
symbol_values = '0.25 0.1 1.1 p00 1.3'
[]
[mass01]
type = ParsedFunction
expression = 'vol*por*dens0*exp(pp/bulk)'
symbol_names = 'vol por dens0 pp bulk'
symbol_values = '0.25 0.1 1.1 p01 1.3'
[]
[expected_mass_change00]
type = ParsedFunction
expression = 'fcn*perm*dens0*exp(pp/bulk)/visc*area*dt'
symbol_names = 'fcn perm dens0 pp bulk visc area dt'
symbol_values = '6 1 1 0 1.3 1 0.5 1E-3'
[]
[]
[Postprocessors]
[p00]
type = PointValue
point = '0 0 0'
variable = pp
execute_on = 'initial timestep_end'
[]
[m00]
type = FunctionValuePostprocessor
function = mass00
execute_on = 'initial timestep_end'
[]
[del_m00]
type = FunctionValuePostprocessor
function = expected_mass_change00
execute_on = 'timestep_end'
[]
[p10]
type = PointValue
point = '1 0 0'
variable = pp
execute_on = 'initial timestep_end'
[]
[p01]
type = PointValue
point = '0 1 0'
variable = pp
execute_on = 'initial timestep_end'
[]
[m01]
type = FunctionValuePostprocessor
function = mass01
execute_on = 'initial timestep_end'
[]
[p11]
type = PointValue
point = '1 1 0'
variable = pp
execute_on = 'initial timestep_end'
[]
[]
[BCs]
[flux]
type = PorousFlowSink
boundary = 'left'
variable = pp
use_mobility = false
use_relperm = true
fluid_phase = 0
flux_function = 6
save_in = flux_out
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -sub_pc_type -snes_max_it -sub_pc_factor_shift_type -pc_asm_overlap'
petsc_options_value = 'gmres asm lu 10000 NONZERO 2'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1E-3
end_time = 1E-2
nl_rel_tol = 1E-12
nl_abs_tol = 1E-12
[]
[Outputs]
file_base = s01
[console]
type = Console
execute_on = 'nonlinear linear'
[]
[csv]
type = CSV
execute_on = 'initial timestep_end'
[]
[]
(modules/porous_flow/test/tests/aux_kernels/darcy_velocity_lower_except.i)
# Exception testing for PorousFlowDarcyVelocityComponentLowerDimensional
# Checking that an error is produced if the AuxVariable is not defined only on
# lower-dimensional elements
[Mesh]
type = FileMesh
file = fractured_block.e
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '1 0.5 0.2'
[]
[Variables]
[pp]
[]
[]
[Kernels]
[dummy]
type = TimeDerivative
variable = pp
[]
[]
[AuxVariables]
[fracture_vel_x]
order = CONSTANT
family = MONOMIAL
[]
[]
[AuxKernels]
[fracture_vel_x]
type = PorousFlowDarcyVelocityComponentLowerDimensional
variable = fracture_vel_x
component = x
fluid_phase = 0
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureConst
pc = 0
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1E16
viscosity = 10
density0 = 2
thermal_expansion = 0
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '5 0 0 0 5 0 0 0 5'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[]
[Executioner]
type = Transient
dt = 1
end_time = 1
[]
(modules/porous_flow/test/tests/dirackernels/bh_except15.i)
# fully-saturated
# production
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 1
xmin = -1
xmax = 1
ymin = -1
ymax = 1
zmin = -1
zmax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
initial_condition = 1E7
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[borehole_total_outflow_mass]
type = PorousFlowSumQuantity
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1e-7
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e9
viscosity = 1e-3
density0 = 1000
thermal_expansion = 0
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[]
[DiracKernels]
[bh]
type = PorousFlowPeacemanBorehole
bottom_p_or_t = 0
fluid_phase = 0
point_file = bh02.bh
SumQuantityUO = borehole_total_outflow_mass
variable = pp
unit_weight = '0 0 0'
character = 1
[]
[]
[Postprocessors]
[bh_report]
type = PorousFlowPlotQuantity
uo = borehole_total_outflow_mass
[]
[fluid_mass0]
type = PorousFlowFluidMass
execute_on = timestep_begin
[]
[fluid_mass1]
type = PorousFlowFluidMass
execute_on = timestep_end
[]
[zmass_error]
type = FunctionValuePostprocessor
function = mass_bal_fcn
execute_on = timestep_end
[]
[p0]
type = PointValue
variable = pp
point = '0 0 0'
execute_on = timestep_end
[]
[]
[Functions]
[mass_bal_fcn]
type = ParsedFunction
expression = abs((a-c+d)/2/(a+c))
symbol_names = 'a c d'
symbol_values = 'fluid_mass1 fluid_mass0 bh_report'
[]
[]
[Preconditioning]
[usual]
type = SMP
full = true
petsc_options = '-snes_converged_reason'
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -ksp_max_it'
petsc_options_value = 'bcgs bjacobi 1E-10 1E-10 10000 30'
[]
[]
[Executioner]
type = Transient
end_time = 0.5
dt = 1E-2
solve_type = NEWTON
[]
(modules/porous_flow/test/tests/jacobian/basic_advection3.i)
# Basic advection with 1 porepressure as a PorousFlow variable
# Constant permeability
# Constant viscosity
[Mesh]
type = GeneratedMesh
dim = 1
nx = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[u]
[]
[P]
[]
[]
[ICs]
[P]
type = RandomIC
variable = P
min = -1
max = 0
[]
[u]
type = RandomIC
variable = u
[]
[]
[Kernels]
[dummy_P]
type = NullKernel
variable = P
[]
[u_advection]
type = PorousFlowBasicAdvection
variable = u
phase = 0
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = P
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
alpha = 1
m = 0.6
sat_lr = 0.1
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 3
density0 = 4
thermal_expansion = 0
viscosity = 150.0
[]
[]
[Materials]
[temperature_qp]
type = PorousFlowTemperature
[]
[ppss_qp]
type = PorousFlow1PhaseP
porepressure = P
capillary_pressure = pc
[]
[simple_fluid_qp]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '5 0 0 0 5 0 0 0 5'
[]
[relperm_qp]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
s_res = 0.1
sum_s_res = 0.1
[]
[darcy_velocity_qp]
type = PorousFlowDarcyVelocityMaterial
gravity = '0.25 0 0'
[]
[]
[Preconditioning]
[check]
type = SMP
full = true
#petsc_options = '-snes_test_display'
petsc_options_iname = '-snes_type'
petsc_options_value = ' test'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
end_time = 1
[]
(modules/porous_flow/test/tests/gravity/grav01a_fv.i)
# Checking that gravity head is established using FV
# 1phase, vanGenuchten, constant fluid-bulk, constant viscosity, constant permeability, Corey relative perm
# fully saturated
# For better agreement with the analytical solution (ana_pp), just increase nx
[Mesh]
type = GeneratedMesh
dim = 1
nx = 100
xmin = -1
xmax = 0
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
type = MooseVariableFVReal
[]
[]
[ICs]
[p]
type = RandomIC
variable = pp
min = 0
max = 1
[]
[]
[FVKernels]
[flux0]
type = FVPorousFlowAdvectiveFlux
fluid_component = 0
variable = pp
gravity = '-1 0 0'
[]
[]
[Functions]
[ana_pp]
type = ParsedFunction
symbol_names = 'g B p0 rho0'
symbol_values = '1 1.2 0 1'
expression = '-B*log(exp(-p0/B)+g*rho0*x/B)' # expected pp at base
[]
[]
[FVBCs]
[z]
type = FVDirichletBC
variable = pp
boundary = right
value = 0
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1.2
density0 = 1
viscosity = 1
thermal_expansion = 0
[]
[]
[Materials]
[temperature]
type = ADPorousFlowTemperature
[]
[ppss]
type = ADPorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = ADPorousFlowMassFraction
[]
[simple_fluid]
type = ADPorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[permeability]
type = ADPorousFlowPermeabilityConst
permeability = '1 0 0 0 2 0 0 0 3'
[]
[relperm]
type = ADPorousFlowRelativePermeabilityCorey
n = 1
phase = 0
[]
[]
[Postprocessors]
[pp_base]
type = PointValue
variable = pp
point = '-1 0 0'
[]
[pp_analytical]
type = FunctionValuePostprocessor
function = ana_pp
point = '-1 0 0'
[]
[pp_00]
type = PointValue
variable = pp
point = '0 0 0'
[]
[pp_01]
type = PointValue
variable = pp
point = '-0.1 0 0'
[]
[pp_02]
type = PointValue
variable = pp
point = '-0.2 0 0'
[]
[pp_03]
type = PointValue
variable = pp
point = '-0.3 0 0'
[]
[pp_04]
type = PointValue
variable = pp
point = '-0.4 0 0'
[]
[pp_05]
type = PointValue
variable = pp
point = '-0.5 0 0'
[]
[pp_06]
type = PointValue
variable = pp
point = '-0.6 0 0'
[]
[pp_07]
type = PointValue
variable = pp
point = '-0.7 0 0'
[]
[pp_08]
type = PointValue
variable = pp
point = '-0.8 0 0'
[]
[pp_09]
type = PointValue
variable = pp
point = '-0.9 0 0'
[]
[pp_10]
type = PointValue
variable = pp
point = '-1 0 0'
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Steady
solve_type = Newton
[]
[Outputs]
[csv]
type = CSV
[]
[]
(modules/porous_flow/test/tests/poroperm/PermFromPoro05.i)
# Testing permeability from porosity
# Trivial test, checking calculated permeability is correct
# k = k_anisotropic * k
# with ln k = A * phi + B
[Mesh]
type = GeneratedMesh
dim = 1
nx = 3
xmin = 0
xmax = 3
[]
[GlobalParams]
block = 0
PorousFlowDictator = dictator
[]
[Variables]
[pp]
[InitialCondition]
type = ConstantIC
value = 0
[]
[]
[]
[Kernels]
[flux]
type = PorousFlowAdvectiveFlux
gravity = '0 0 0'
variable = pp
[]
[]
[BCs]
[ptop]
type = DirichletBC
variable = pp
boundary = right
value = 0
[]
[pbase]
type = DirichletBC
variable = pp
boundary = left
value = 1
[]
[]
[AuxVariables]
[poro]
order = CONSTANT
family = MONOMIAL
[]
[perm_x]
order = CONSTANT
family = MONOMIAL
[]
[perm_y]
order = CONSTANT
family = MONOMIAL
[]
[perm_z]
order = CONSTANT
family = MONOMIAL
[]
[]
[AuxKernels]
[poro]
type = PorousFlowPropertyAux
property = porosity
variable = poro
[]
[perm_x]
type = PorousFlowPropertyAux
property = permeability
variable = perm_x
row = 0
column = 0
[]
[perm_y]
type = PorousFlowPropertyAux
property = permeability
variable = perm_y
row = 1
column = 1
[]
[perm_z]
type = PorousFlowPropertyAux
property = permeability
variable = perm_z
row = 2
column = 2
[]
[]
[Postprocessors]
[perm_x_bottom]
type = PointValue
variable = perm_x
point = '0 0 0'
[]
[perm_y_bottom]
type = PointValue
variable = perm_y
point = '0 0 0'
[]
[perm_z_bottom]
type = PointValue
variable = perm_z
point = '0 0 0'
[]
[perm_x_top]
type = PointValue
variable = perm_x
point = '3 0 0'
[]
[perm_y_top]
type = PointValue
variable = perm_y
point = '3 0 0'
[]
[perm_z_top]
type = PointValue
variable = perm_z
point = '3 0 0'
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
# unimportant in this fully-saturated test
m = 0.8
alpha = 1e-4
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2.2e9
viscosity = 1e-3
density0 = 1000
thermal_expansion = 0
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[massfrac]
type = PorousFlowMassFraction
[]
[eff_fluid_pressure]
type = PorousFlowEffectiveFluidPressure
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosity
porosity_zero = 0.1
[]
[permeability]
type = PorousFlowPermeabilityExponential
k_anisotropy = '1 0 0 0 2 0 0 0 0.1'
poroperm_function = ln_k
A = 10.0
B = -18.420681
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 0 # unimportant in this fully-saturated situation
phase = 0
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
[]
[]
[Executioner]
solve_type = Newton
type = Steady
l_tol = 1E-5
nl_abs_tol = 1E-3
nl_rel_tol = 1E-8
l_max_its = 200
nl_max_its = 400
petsc_options_iname = '-pc_type -pc_asm_overlap -sub_pc_type -ksp_type -ksp_gmres_restart'
petsc_options_value = ' asm 2 lu gmres 200'
[]
[Outputs]
csv = true
execute_on = 'timestep_end'
[]
(modules/porous_flow/test/tests/actions/addmaterials2.i)
# Test that the PorousFlowAddMaterialAction correctly handles the case where
# the at_nodes parameter isn't provided. In this case, only a single material
# is given, and the action must correctly identify if materials should be added
# at the nodes, qps, or even both
[Mesh]
type = GeneratedMesh
dim = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[Variables]
[pwater]
initial_condition = 1e6
[]
[sgas]
initial_condition = 0.3
[]
[temperature]
initial_condition = 50
[]
[]
[AuxVariables]
[x0]
initial_condition = 0.1
[]
[x1]
initial_condition = 0.5
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pwater
[]
[mass1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = sgas
[]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = pwater
[]
[flux1]
type = PorousFlowAdvectiveFlux
fluid_component = 1
variable = sgas
[]
[energy_dot]
type = PorousFlowEnergyTimeDerivative
variable = temperature
[]
[heat_advection]
type = PorousFlowHeatAdvection
variable = temperature
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pwater sgas temperature'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1e-5
pc_max = 1e7
sat_lr = 0.1
[]
[]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 1e9
viscosity = 1e-3
density0 = 1000
thermal_expansion = 0
cv = 2
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 1e9
viscosity = 1e-4
density0 = 20
thermal_expansion = 0
cv = 1
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = 50
[]
[ppss]
type = PorousFlow2PhasePS
phase0_porepressure = pwater
phase1_saturation = sgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'x0 x1'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-12 0 0 0 1e-12 0 0 0 1e-12'
[]
[relperm0]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
s_res = 0.1
sum_s_res = 0.11
[]
[relperm1]
type = PorousFlowRelativePermeabilityCorey
n = 3
phase = 1
s_res = 0.01
sum_s_res = 0.11
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[rock_heat]
type = PorousFlowMatrixInternalEnergy
specific_heat_capacity = 1.0
density = 125
[]
[unused]
type = GenericConstantMaterial
prop_names = unused
prop_values = 0
[]
[]
[Executioner]
type = Transient
end_time = 1
nl_abs_tol = 1e-14
[]
(modules/porous_flow/test/tests/aux_kernels/darcy_velocity.i)
# checking that the PorousFlowDarcyVelocityComponent AuxKernel works as expected
# for the fully-saturated case (relative-permeability = 1)
# There is one element, of unit size. The pressures and fluid densities at the qps are:
# (x,y,z)=( 0.211325 , 0.211325 , 0.211325 ). p = 1.479 rho = 3.217
# (x,y,z)=( 0.788675 , 0.211325 , 0.211325 ). p = 2.057 rho = 4.728
# (x,y,z)=( 0.211325 , 0.788675 , 0.211325 ). p = 2.634 rho = 6.947
# (x,y,z)=( 0.788675 , 0.788675 , 0.211325 ). p = 3.211 rho = 10.208
# (x,y,z)=( 0.211325 , 0.211325 , 0.788675 ). p = 3.789 rho = 15.001
# (x,y,z)=( 0.788675 , 0.211325 , 0.788675 ). p = 4.367 rho = 22.043
# (x,y,z)=( 0.211325 , 0.788675 , 0.788675 ). p = 4.943 rho = 32.392
# (x,y,z)=( 0.788675 , 0.788675 , 0.788675 ). p = 5.521 rho = 47.599
# Average density = 17.7668
# grad(P) = (1, 2, 4)
# with permeability = diag(1, 2, 3) and gravity = (1, -2, 3) and viscosity = 3.2
# So Darcy velocity = (5.23963, -23.4585, 46.2192)
[Mesh]
type = GeneratedMesh
dim = 3
xmin = 0
xmax = 1
ymin = 0
ymax = 1
zmin = 0
zmax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '1 -2 3'
[]
[Variables]
[pp]
[]
[]
[ICs]
[pinit]
type = FunctionIC
function = x+2*y+4*z
variable = pp
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
[]
[]
[AuxVariables]
[vel_x]
order = CONSTANT
family = MONOMIAL
[]
[vel_y]
order = CONSTANT
family = MONOMIAL
[]
[vel_z]
order = CONSTANT
family = MONOMIAL
[]
[]
[AuxKernels]
[vel_x]
type = PorousFlowDarcyVelocityComponent
variable = vel_x
component = x
fluid_phase = 0
[]
[vel_y]
type = PorousFlowDarcyVelocityComponent
variable = vel_y
component = y
fluid_phase = 0
[]
[vel_z]
type = PorousFlowDarcyVelocityComponent
variable = vel_z
component = z
fluid_phase = 0
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1.5
viscosity = 3.2
density0 = 1.2
thermal_expansion = 0
[]
[]
[Postprocessors]
[vel_x]
type = PointValue
variable = vel_x
point = '0.5 0.5 0.5'
[]
[vel_y]
type = PointValue
variable = vel_y
point = '0.5 0.5 0.5'
[]
[vel_z]
type = PointValue
variable = vel_z
point = '0.5 0.5 0.5'
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 2 0 0 0 3'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[]
[Executioner]
type = Transient
solve_type = Newton
nl_abs_tol = 1e-16
dt = 1
end_time = 1
[]
[Outputs]
execute_on = 'timestep_end'
file_base = darcy_velocity
csv = true
[]
(modules/porous_flow/test/tests/pressure_pulse/pressure_pulse_1d_2phasePS_KT.i)
# Pressure pulse in 1D with 2 phases, 2components - transient
# Using KT stabilization
[Mesh]
type = GeneratedMesh
dim = 1
nx = 10
xmin = 0
xmax = 100
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[Variables]
[ppwater]
initial_condition = 2e6
[]
[sgas]
initial_condition = 0.3
[]
[]
[AuxVariables]
[massfrac_ph0_sp0]
initial_condition = 1
[]
[massfrac_ph1_sp0]
initial_condition = 0
[]
[ppgas]
family = MONOMIAL
order = FIRST
[]
[]
[Kernels]
[mass_component0]
type = PorousFlowMassTimeDerivative
variable = ppwater
fluid_component = 0
[]
[flux_component0_phase0]
type = PorousFlowFluxLimitedTVDAdvection
variable = ppwater
advective_flux_calculator = afc_component0_phase0
[]
[flux_component0_phase1]
type = PorousFlowFluxLimitedTVDAdvection
variable = ppwater
advective_flux_calculator = afc_component0_phase1
[]
[mass_component1]
type = PorousFlowMassTimeDerivative
variable = sgas
fluid_component = 1
[]
[flux_component1_phase0]
type = PorousFlowFluxLimitedTVDAdvection
variable = sgas
advective_flux_calculator = afc_component1_phase0
[]
[flux_component1_phase1]
type = PorousFlowFluxLimitedTVDAdvection
variable = sgas
advective_flux_calculator = afc_component1_phase1
[]
[]
[AuxKernels]
[ppgas]
type = PorousFlowPropertyAux
property = pressure
phase = 1
variable = ppgas
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'ppwater sgas'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureConst
pc = 1e5
[]
[afc_component0_phase0]
type = PorousFlowAdvectiveFluxCalculatorUnsaturatedMultiComponent
fluid_component = 0
phase = 0
flux_limiter_type = superbee
[]
[afc_component0_phase1]
type = PorousFlowAdvectiveFluxCalculatorUnsaturatedMultiComponent
fluid_component = 0
phase = 1
flux_limiter_type = superbee
[]
[afc_component1_phase0]
type = PorousFlowAdvectiveFluxCalculatorUnsaturatedMultiComponent
fluid_component = 1
phase = 0
flux_limiter_type = superbee
[]
[afc_component1_phase1]
type = PorousFlowAdvectiveFluxCalculatorUnsaturatedMultiComponent
fluid_component = 1
phase = 1
flux_limiter_type = superbee
[]
[]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 2e9
density0 = 1000
thermal_expansion = 0
viscosity = 1e-3
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 2e7
density0 = 1
thermal_expansion = 0
viscosity = 1e-5
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePS
phase0_porepressure = ppwater
phase1_saturation = sgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph1_sp0'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-15 0 0 0 1e-15 0 0 0 1e-15'
[]
[relperm_water]
type = PorousFlowRelativePermeabilityCorey
n = 1
phase = 0
[]
[relperm_gas]
type = PorousFlowRelativePermeabilityCorey
n = 1
phase = 1
[]
[]
[BCs]
[leftwater]
type = DirichletBC
boundary = left
value = 3e6
variable = ppwater
[]
[rightwater]
type = DirichletBC
boundary = right
value = 2e6
variable = ppwater
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-20 10000'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1e3
end_time = 1e4
[]
[VectorPostprocessors]
[pp]
type = LineValueSampler
warn_discontinuous_face_values = false
sort_by = x
variable = 'ppwater ppgas'
start_point = '0 0 0'
end_point = '100 0 0'
num_points = 11
[]
[]
[Outputs]
file_base = pressure_pulse_1d_2phasePS_KT
print_linear_residuals = false
[csv]
type = CSV
execute_on = final
[]
[]
(modules/porous_flow/test/tests/dirackernels/hfrompps.i)
[Mesh]
type = GeneratedMesh
dim = 2
nx = 3
ny = 3
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pressure]
[]
[temperature]
scaling = 1E-6
[]
[]
[ICs]
[pressure_ic]
type = ConstantIC
variable = pressure
value = 1e6
[]
[temperature_ic]
type = ConstantIC
variable = temperature
value = 400
[]
[]
[Kernels]
[P_time_deriv]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pressure
[]
[P_flux]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = pressure
gravity = '0 -9.8 0'
[]
[energy_dot]
type = PorousFlowEnergyTimeDerivative
variable = temperature
[]
[heat_conduction]
type = PorousFlowHeatConduction
variable = temperature
[]
[heat_advection]
type = PorousFlowHeatAdvection
variable = temperature
gravity = '0 -9.8 0'
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pressure temperature'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureConst
[]
[]
[Functions]
[mass_flux_in_fn]
type = PiecewiseConstant
direction = left
xy_data = '
0 0
100 0.1
300 0
600 0.1
1400 0
1500 0.2'
[]
[T_in_fn]
type = PiecewiseLinear
xy_data = '
0 400
600 450'
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e9
density0 = 1000
thermal_expansion = 0
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = temperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pressure
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
at_nodes = true
[]
[fluid_props]
type = PorousFlowSingleComponentFluid
phase = 0
fp = simple_fluid
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 1
phase = 0
[]
[fp_mat]
type = FluidPropertiesMaterialPT
pressure = pressure
temperature = temperature
fp = simple_fluid
[]
[rock_heat]
type = PorousFlowMatrixInternalEnergy
specific_heat_capacity = 830.0
density = 2750
[]
[thermal_conductivity]
type = PorousFlowThermalConductivityIdeal
dry_thermal_conductivity = '2.5 0 0 0 2.5 0 0 0 2.5'
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1.0E-15 0 0 0 1.0E-15 0 0 0 1.0E-14'
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[]
[DiracKernels]
[source]
type = PorousFlowPointSourceFromPostprocessor
variable = pressure
mass_flux = mass_flux_in
point = '0.5 0.5 0'
[]
[source_h]
type = PorousFlowPointEnthalpySourceFromPostprocessor
variable = temperature
mass_flux = mass_flux_in
point = '0.5 0.5 0'
T_in = T_in
pressure = pressure
fp = simple_fluid
[]
[]
[Preconditioning]
[preferred]
type = SMP
full = true
petsc_options_iname = '-pc_type'
petsc_options_value = ' lu '
[]
[]
[Postprocessors]
[total_mass]
type = PorousFlowFluidMass
execute_on = 'initial timestep_end'
[]
[total_heat]
type = PorousFlowHeatEnergy
[]
[mass_flux_in]
type = FunctionValuePostprocessor
function = mass_flux_in_fn
execute_on = 'initial timestep_end'
[]
[avg_temp]
type = ElementAverageValue
variable = temperature
execute_on = 'initial timestep_end'
[]
[T_in]
type = FunctionValuePostprocessor
function = T_in_fn
execute_on = 'initial timestep_end'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
nl_abs_tol = 1e-14
dt = 100
end_time = 2000
[]
[Outputs]
csv = true
execute_on = 'initial timestep_end'
file_base = hfrompps
[]
(modules/porous_flow/test/tests/pressure_pulse/pressure_pulse_1d_2phase_monomial.i)
# Pressure pulse in 1D with 2 phases (with one having zero saturation), 2components - transient
#
# Note: this is identical to pressure_pules_1d_2phase.i, except that the mass fraction AuxVariables are
# constant monomials. The result should be identical though.
[Mesh]
type = GeneratedMesh
dim = 1
nx = 10
xmin = 0
xmax = 100
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[ppwater]
initial_condition = 2E6
[]
[ppgas]
initial_condition = 2E6
[]
[]
[AuxVariables]
[massfrac_ph0_sp0]
order = CONSTANT
family = MONOMIAL
initial_condition = 1
[]
[massfrac_ph1_sp0]
order = CONSTANT
family = MONOMIAL
initial_condition = 0
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = ppwater
[]
[flux0]
type = PorousFlowAdvectiveFlux
variable = ppwater
gravity = '0 0 0'
fluid_component = 0
[]
[mass1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = ppgas
[]
[flux1]
type = PorousFlowAdvectiveFlux
variable = ppgas
gravity = '0 0 0'
fluid_component = 1
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'ppwater ppgas'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 2e9
density0 = 1000
thermal_expansion = 0
viscosity = 1e-3
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 2e6
density0 = 1
thermal_expansion = 0
viscosity = 1e-5
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePP
phase0_porepressure = ppwater
phase1_porepressure = ppgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph1_sp0'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-15 0 0 0 1E-15 0 0 0 1E-15'
[]
[relperm_water]
type = PorousFlowRelativePermeabilityCorey
n = 1
phase = 0
[]
[relperm_gas]
type = PorousFlowRelativePermeabilityCorey
n = 1
phase = 1
[]
[]
[BCs]
[leftwater]
type = DirichletBC
boundary = left
value = 3E6
variable = ppwater
[]
[leftgas]
type = DirichletBC
boundary = left
value = 3E6
variable = ppgas
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
petsc_options = '-snes_converged_reason -ksp_diagonal_scale -ksp_diagonal_scale_fix -ksp_gmres_modifiedgramschmidt -snes_linesearch_monitor'
petsc_options_iname = '-ksp_type -pc_type -sub_pc_type -sub_pc_factor_shift_type -pc_asm_overlap -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'gmres asm lu NONZERO 2 1E-15 1E-20 20'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1E3
end_time = 1E4
[]
[Postprocessors]
[p000]
type = PointValue
variable = ppwater
point = '0 0 0'
execute_on = 'initial timestep_end'
[]
[p010]
type = PointValue
variable = ppwater
point = '10 0 0'
execute_on = 'initial timestep_end'
[]
[p020]
type = PointValue
variable = ppwater
point = '20 0 0'
execute_on = 'initial timestep_end'
[]
[p030]
type = PointValue
variable = ppwater
point = '30 0 0'
execute_on = 'initial timestep_end'
[]
[p040]
type = PointValue
variable = ppwater
point = '40 0 0'
execute_on = 'initial timestep_end'
[]
[p050]
type = PointValue
variable = ppwater
point = '50 0 0'
execute_on = 'initial timestep_end'
[]
[p060]
type = PointValue
variable = ppwater
point = '60 0 0'
execute_on = 'initial timestep_end'
[]
[p070]
type = PointValue
variable = ppwater
point = '70 0 0'
execute_on = 'initial timestep_end'
[]
[p080]
type = PointValue
variable = ppwater
point = '80 0 0'
execute_on = 'initial timestep_end'
[]
[p090]
type = PointValue
variable = ppwater
point = '90 0 0'
execute_on = 'initial timestep_end'
[]
[p100]
type = PointValue
variable = ppwater
point = '100 0 0'
execute_on = 'initial timestep_end'
[]
[]
[Outputs]
file_base = pressure_pulse_1d_2phase
print_linear_residuals = false
csv = true
[]
(modules/porous_flow/test/tests/jacobian/fflux13.i)
# 2phase (PP), 3components (that exist in both phases), constant viscosity, constant insitu permeability
# density with constant bulk, Corey relative perm, nonzero gravity, unsaturated with vanGenuchten
# using harmonic-mean mobility
[Mesh]
type = GeneratedMesh
dim = 2
nx = 2
xmin = 0
xmax = 1
ny = 1
ymin = 0
ymax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[ppwater]
[]
[ppgas]
[]
[massfrac_ph0_sp0]
[]
[]
[AuxVariables]
[massfrac_ph0_sp1]
[]
[massfrac_ph1_sp0]
[]
[massfrac_ph1_sp1]
[]
[]
[ICs]
[ppwater]
type = RandomIC
variable = ppwater
min = -1
max = 0
[]
[ppgas]
type = RandomIC
variable = ppgas
min = 0
max = 1
[]
[massfrac_ph0_sp0]
type = RandomIC
variable = massfrac_ph0_sp0
min = 0
max = 0.4
[]
[massfrac_ph0_sp1]
type = RandomIC
variable = massfrac_ph0_sp1
min = 0
max = 0.4
[]
[massfrac_ph1_sp0]
type = RandomIC
variable = massfrac_ph1_sp0
min = 0
max = 0.4
[]
[massfrac_ph1_sp1]
type = RandomIC
variable = massfrac_ph1_sp1
min = 0
max = 0.4
[]
[]
[Kernels]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = ppwater
gravity = '-1 -0.1 0'
full_upwind_threshold = 0
[]
[flux1]
type = PorousFlowAdvectiveFlux
fluid_component = 1
variable = ppgas
gravity = '-1 -0.1 0'
full_upwind_threshold = 0
fallback_scheme = harmonic
[]
[flux2]
type = PorousFlowAdvectiveFlux
fluid_component = 2
variable = massfrac_ph0_sp0
gravity = '-1 -0.1 0'
full_upwind_threshold = 0
fallback_scheme = harmonic
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'ppwater ppgas massfrac_ph0_sp0'
number_fluid_phases = 2
number_fluid_components = 3
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 1.5
density0 = 1
thermal_expansion = 0
viscosity = 1
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 0.5
density0 = 0.5
thermal_expansion = 0
viscosity = 1
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePP
phase0_porepressure = ppwater
phase1_porepressure = ppgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph0_sp1 massfrac_ph1_sp0 massfrac_ph1_sp1'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 2 0 0 0 3'
[]
[relperm0]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[relperm1]
type = PorousFlowRelativePermeabilityCorey
n = 3
phase = 1
[]
[]
[Preconditioning]
active = check
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000'
[]
[check]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -snes_type'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000 test'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
[Outputs]
exodus = false
[]
(modules/porous_flow/test/tests/dirackernels/bh_except06.i)
# PorousFlowPeacemanBorehole exception test
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 1
xmin = -1
xmax = 1
ymin = -1
ymax = 1
zmin = -1
zmax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
initial_condition = 1E7
[]
[]
[Kernels]
[mass0]
type = TimeDerivative
variable = pp
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[borehole_total_outflow_mass]
type = PorousFlowSumQuantity
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1e-7
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e9
viscosity = 1e-3
density0 = 1000
thermal_expansion = 0
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-12 0 0 0 1E-12 0 0 0 1E-12'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[]
[DiracKernels]
[bh]
type = PorousFlowPeacemanBorehole
bottom_p_or_t = 0
fluid_phase = 0
point_file = bh02.bh
use_mobility = true
SumQuantityUO = borehole_total_outflow_mass
variable = pp
unit_weight = '0 0 0'
character = 1
[]
[]
[Postprocessors]
[bh_report]
type = PorousFlowPlotQuantity
uo = borehole_total_outflow_mass
[]
[fluid_mass0]
type = PorousFlowFluidMass
execute_on = timestep_begin
[]
[fluid_mass1]
type = PorousFlowFluidMass
execute_on = timestep_end
[]
[zmass_error]
type = FunctionValuePostprocessor
function = mass_bal_fcn
execute_on = timestep_end
[]
[p0]
type = PointValue
variable = pp
point = '0 0 0'
execute_on = timestep_end
[]
[]
[Functions]
[mass_bal_fcn]
type = ParsedFunction
expression = abs((a-c+d)/2/(a+c))
symbol_names = 'a c d'
symbol_values = 'fluid_mass1 fluid_mass0 bh_report'
[]
[]
[Preconditioning]
[usual]
type = SMP
full = true
petsc_options = '-snes_converged_reason'
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -ksp_max_it'
petsc_options_value = 'bcgs bjacobi 1E-10 1E-10 10000 30'
[]
[]
[Executioner]
type = Transient
end_time = 0.5
dt = 1E-2
solve_type = NEWTON
[]
(modules/porous_flow/test/tests/dirackernels/bh02reporter.i)
# fully-saturated
# production
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 1
xmin = -1
xmax = 1
ymin = -1
ymax = 1
zmin = -1
zmax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
initial_condition = 1E7
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
[]
[]
[UserObjects]
[borehole_total_outflow_mass]
type = PorousFlowSumQuantity
[]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1e-7
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e9
viscosity = 1e-3
density0 = 1000
thermal_expansion = 0
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-12 0 0 0 1E-12 0 0 0 1E-12'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[]
[DiracKernels]
[bh]
type = PorousFlowPeacemanBorehole
# Because the Variable for this Sink is pp, and pp is associated
# with the fluid-mass conservation equation, this sink is extracting
# fluid mass (and not heat energy or something else)
variable = pp
# The following specfies that the total fluid mass coming out of
# the porespace via this sink in this timestep should be recorded
# in the pls_total_outflow_mass UserObject
SumQuantityUO = borehole_total_outflow_mass
# The following file defines the polyline geometry
# which is just two points in this particular example
weight_reporter='bh02file/column_0'
x_coord_reporter='bh02file/column_1'
y_coord_reporter='bh02file/column_2'
z_coord_reporter='bh02file/column_3'
# First, we want Peacemans f to be a function of porepressure (and not
# temperature or something else). So bottom_p_or_t is actually porepressure
function_of = pressure
fluid_phase = 0
# The bottomhole pressure
bottom_p_or_t = 0
# In this example there is no increase of the wellbore pressure
# due to gravity:
unit_weight = '0 0 0'
# PeacemanBoreholes should almost always have use_mobility = true
use_mobility = true
# This is a production wellbore (a sink of fluid that removes fluid from porespace)
character = 1
[]
[]
[VectorPostprocessors]
[bh02file]
type = CSVReader
csv_file = bh02.bh
[]
[]
[Postprocessors]
[bh_report]
type = PorousFlowPlotQuantity
uo = borehole_total_outflow_mass
[]
[fluid_mass0]
type = PorousFlowFluidMass
execute_on = timestep_begin
[]
[fluid_mass1]
type = PorousFlowFluidMass
execute_on = timestep_end
[]
[zmass_error]
type = FunctionValuePostprocessor
function = mass_bal_fcn
execute_on = timestep_end
indirect_dependencies = 'fluid_mass1 fluid_mass0 bh_report'
[]
[p0]
type = PointValue
variable = pp
point = '0 0 0'
execute_on = timestep_end
[]
[]
[Functions]
[mass_bal_fcn]
type = ParsedFunction
expression = abs((a-c+d)/2/(a+c))
symbol_names = 'a c d'
symbol_values = 'fluid_mass1 fluid_mass0 bh_report'
[]
[]
[Preconditioning]
[usual]
type = SMP
full = true
petsc_options = '-snes_converged_reason'
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -ksp_max_it'
petsc_options_value = 'bcgs bjacobi 1E-10 1E-10 10000 30'
[]
[]
[Executioner]
type = Transient
end_time = 0.5
dt = 1E-2
solve_type = NEWTON
[]
[Outputs]
exodus = false
csv = true
execute_on = timestep_end
[]
(modules/porous_flow/test/tests/gravity/grav02d.i)
# Checking that gravity head is established in the transient situation when 0<=saturation<=1 (note the less-than-or-equal-to).
# 2phase (PP), 2components, vanGenuchten, constant fluid bulk-moduli for each phase, constant viscosity, constant permeability, Corey relative perm.
# A boundary condition enforces porepressures at the right boundary
# For better agreement with the analytical solution (ana_pp), just increase nx
[Mesh]
type = GeneratedMesh
dim = 1
nx = 10
xmin = -1
xmax = 0
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Functions]
[dts]
type = PiecewiseLinear
x = '1E-3 1E-2 1E-1 2E-1'
y = '1E-3 1E-2 0.2E-1 1E-1'
[]
[]
[Variables]
[ppwater]
initial_condition = 0
[]
[ppgas]
initial_condition = 0.5
[]
[]
[AuxVariables]
[massfrac_ph0_sp0]
initial_condition = 1
[]
[massfrac_ph1_sp0]
initial_condition = 0
[]
[]
[BCs]
[ppwater]
type = DirichletBC
boundary = right
variable = ppwater
value = 0
[]
[ppgas]
type = DirichletBC
boundary = right
variable = ppgas
value = 0.5
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = ppwater
[]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = ppwater
gravity = '-1 0 0'
[]
[mass1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = ppgas
[]
[flux1]
type = PorousFlowAdvectiveFlux
fluid_component = 1
variable = ppgas
gravity = '-1 0 0'
[]
[]
[Functions]
[ana_ppwater]
type = ParsedFunction
symbol_names = 'g B p0 rho0'
symbol_values = '1 2 pp_water_top 1'
expression = '-B*log(exp(-p0/B)+g*rho0*x/B)' # expected pp at base
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'ppwater ppgas'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 1.2
density0 = 1
viscosity = 1
thermal_expansion = 0
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 1
density0 = 0.1
viscosity = 0.5
thermal_expansion = 0
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePP
phase0_porepressure = ppwater
phase1_porepressure = ppgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph1_sp0'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 2 0 0 0 3'
[]
[relperm_water]
type = PorousFlowRelativePermeabilityCorey
n = 1
phase = 0
[]
[relperm_gas]
type = PorousFlowRelativePermeabilityCorey
n = 1
phase = 1
[]
[]
[Postprocessors]
[pp_water_top]
type = PointValue
variable = ppwater
point = '0 0 0'
[]
[pp_water_base]
type = PointValue
variable = ppwater
point = '-1 0 0'
[]
[pp_water_analytical]
type = FunctionValuePostprocessor
function = ana_ppwater
point = '-1 0 0'
[]
[ppwater_00]
type = PointValue
variable = ppwater
point = '0 0 0'
[]
[ppwater_01]
type = PointValue
variable = ppwater
point = '-0.1 0 0'
[]
[ppwater_02]
type = PointValue
variable = ppwater
point = '-0.2 0 0'
[]
[ppwater_03]
type = PointValue
variable = ppwater
point = '-0.3 0 0'
[]
[ppwater_04]
type = PointValue
variable = ppwater
point = '-0.4 0 0'
[]
[ppwater_05]
type = PointValue
variable = ppwater
point = '-0.5 0 0'
[]
[ppwater_06]
type = PointValue
variable = ppwater
point = '-0.6 0 0'
[]
[ppwater_07]
type = PointValue
variable = ppwater
point = '-0.7 0 0'
[]
[ppwater_08]
type = PointValue
variable = ppwater
point = '-0.8 0 0'
[]
[ppwater_09]
type = PointValue
variable = ppwater
point = '-0.9 0 0'
[]
[ppwater_10]
type = PointValue
variable = ppwater
point = '-1 0 0'
[]
[ppgas_00]
type = PointValue
variable = ppgas
point = '0 0 0'
[]
[ppgas_01]
type = PointValue
variable = ppgas
point = '-0.1 0 0'
[]
[ppgas_02]
type = PointValue
variable = ppgas
point = '-0.2 0 0'
[]
[ppgas_03]
type = PointValue
variable = ppgas
point = '-0.3 0 0'
[]
[ppgas_04]
type = PointValue
variable = ppgas
point = '-0.4 0 0'
[]
[ppgas_05]
type = PointValue
variable = ppgas
point = '-0.5 0 0'
[]
[ppgas_06]
type = PointValue
variable = ppgas
point = '-0.6 0 0'
[]
[ppgas_07]
type = PointValue
variable = ppgas
point = '-0.7 0 0'
[]
[ppgas_08]
type = PointValue
variable = ppgas
point = '-0.8 0 0'
[]
[ppgas_09]
type = PointValue
variable = ppgas
point = '-0.9 0 0'
[]
[ppgas_10]
type = PointValue
variable = ppgas
point = '-1 0 0'
[]
[]
[Preconditioning]
active = andy
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'bcgs bjacobi 1E-12 1E-10 10000'
[]
[check]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -snes_type'
petsc_options_value = 'bcgs bjacobi 1E-12 1E-10 10000 test'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
[TimeStepper]
type = FunctionDT
function = dts
[]
end_time = 1.0
[]
[Outputs]
[csv]
type = CSV
execute_on = 'initial final'
file_base = grav02d
[]
[]
(modules/porous_flow/test/tests/jacobian/fflux03.i)
# 2phase (PP), 2components (that exist in both phases), constant viscosity, constant insitu permeability
# density with constant bulk, Corey relative perm, nonzero gravity, unsaturated with vanGenuchten
[Mesh]
type = GeneratedMesh
dim = 2
nx = 2
xmin = 0
xmax = 1
ny = 1
ymin = 0
ymax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[ppwater]
[]
[ppgas]
[]
[]
[AuxVariables]
[massfrac_ph0_sp0]
[]
[massfrac_ph1_sp0]
[]
[]
[ICs]
[ppwater]
type = RandomIC
variable = ppwater
min = -1
max = 0
[]
[ppgas]
type = RandomIC
variable = ppgas
min = 0
max = 1
[]
[massfrac_ph0_sp0]
type = RandomIC
variable = massfrac_ph0_sp0
min = 0
max = 1
[]
[massfrac_ph1_sp0]
type = RandomIC
variable = massfrac_ph1_sp0
min = 0
max = 1
[]
[]
[Kernels]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = ppwater
gravity = '-1 -0.1 0'
[]
[flux1]
type = PorousFlowAdvectiveFlux
fluid_component = 1
variable = ppgas
gravity = '-1 -0.1 0'
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'ppwater ppgas'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 1.5
density0 = 1
thermal_expansion = 0
viscosity = 1
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 0.5
density0 = 0.5
thermal_expansion = 0
viscosity = 1
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePP
phase0_porepressure = ppwater
phase1_porepressure = ppgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph1_sp0'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 2 0 0 0 3'
[]
[relperm0]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[relperm1]
type = PorousFlowRelativePermeabilityCorey
n = 3
phase = 1
[]
[]
[Preconditioning]
active = check
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000'
[]
[check]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -snes_type'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000 test'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
[Outputs]
exodus = false
[]
(modules/porous_flow/test/tests/pressure_pulse/pressure_pulse_1d_2phasePS_fv.i)
# Pressure pulse in 1D with 2 phases, 2components - transient using FV
[Mesh]
[mesh]
type = GeneratedMeshGenerator
dim = 1
nx = 10
xmin = 0
xmax = 100
[]
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[Variables]
[ppwater]
type = MooseVariableFVReal
initial_condition = 2e6
[]
[sgas]
type = MooseVariableFVReal
initial_condition = 0.3
[]
[]
[AuxVariables]
[massfrac_ph0_sp0]
type = MooseVariableFVReal
initial_condition = 1
[]
[massfrac_ph1_sp0]
type = MooseVariableFVReal
initial_condition = 0
[]
[ppgas]
family = MONOMIAL
order = CONSTANT
[]
[]
[FVKernels]
[mass0]
type = FVPorousFlowMassTimeDerivative
fluid_component = 0
variable = ppwater
[]
[flux0]
type = FVPorousFlowAdvectiveFlux
variable = ppwater
fluid_component = 0
[]
[mass1]
type = FVPorousFlowMassTimeDerivative
fluid_component = 1
variable = sgas
[]
[flux1]
type = FVPorousFlowAdvectiveFlux
variable = sgas
fluid_component = 1
[]
[]
[AuxKernels]
[ppgas]
type = ADPorousFlowPropertyAux
property = pressure
phase = 1
variable = ppgas
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'ppwater sgas'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureConst
pc = 1e5
[]
[]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 2e9
density0 = 1000
thermal_expansion = 0
viscosity = 1e-3
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 2e7
density0 = 1
thermal_expansion = 0
viscosity = 1e-5
[]
[]
[Materials]
[temperature]
type = ADPorousFlowTemperature
[]
[ppss]
type = ADPorousFlow2PhasePS
phase0_porepressure = ppwater
phase1_saturation = sgas
capillary_pressure = pc
[]
[massfrac]
type = ADPorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph1_sp0'
[]
[simple_fluid0]
type = ADPorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = ADPorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[porosity]
type = ADPorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = ADPorousFlowPermeabilityConst
permeability = '1e-15 0 0 0 1e-15 0 0 0 1e-15'
[]
[relperm_water]
type = ADPorousFlowRelativePermeabilityCorey
n = 1
phase = 0
[]
[relperm_gas]
type = ADPorousFlowRelativePermeabilityCorey
n = 1
phase = 1
[]
[]
[FVBCs]
[leftwater]
type = FVDirichletBC
boundary = left
value = 3e6
variable = ppwater
[]
[rightwater]
type = FVDirichletBC
boundary = right
value = 2e6
variable = ppwater
[]
[sgas]
type = FVDirichletBC
boundary = 'left right'
value = 0.3
variable = sgas
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1e3
end_time = 1e4
[]
[VectorPostprocessors]
[pp]
type = ElementValueSampler
sort_by = x
variable = 'ppwater ppgas'
[]
[]
[Outputs]
file_base = pressure_pulse_1d_2phasePS_fv
print_linear_residuals = false
[csv]
type = CSV
execute_on = final
[]
exodus = true
[]
(modules/porous_flow/test/tests/capillary_pressure/brooks_corey2.i)
# Test Brooks-Corey capillary pressure curve by varying saturation over the mesh
# lambda = 2, sat_lr = 0.1, log_extension = true
[Mesh]
type = GeneratedMesh
dim = 1
nx = 500
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[p0]
initial_condition = 1e6
[]
[s1]
[]
[]
[AuxVariables]
[s0aux]
family = MONOMIAL
order = CONSTANT
[]
[s1aux]
family = MONOMIAL
order = CONSTANT
[]
[p0aux]
family = MONOMIAL
order = CONSTANT
[]
[p1aux]
family = MONOMIAL
order = CONSTANT
[]
[]
[AuxKernels]
[s0]
type = PorousFlowPropertyAux
property = saturation
phase = 0
variable = s0aux
[]
[s1]
type = PorousFlowPropertyAux
property = saturation
phase = 1
variable = s1aux
[]
[p0]
type = PorousFlowPropertyAux
property = pressure
phase = 0
variable = p0aux
[]
[p1]
type = PorousFlowPropertyAux
property = pressure
phase = 1
variable = p1aux
[]
[]
[Functions]
[s1]
type = ParsedFunction
expression = x
[]
[]
[ICs]
[s1]
type = FunctionIC
variable = s1
function = s1
[]
[]
[Kernels]
[p0]
type = Diffusion
variable = p0
[]
[s1]
type = Diffusion
variable = s1
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'p0 s1'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureBC
lambda = 2
log_extension = true
pe = 1e5
sat_lr = 0.1
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePS
phase0_porepressure = p0
phase1_saturation = s1
capillary_pressure = pc
[]
[kr0]
type = PorousFlowRelativePermeabilityVG
phase = 0
m = 0.5
[]
[kr1]
type = PorousFlowRelativePermeabilityCorey
phase = 1
n = 2
[]
[]
[VectorPostprocessors]
[vpp]
type = LineValueSampler
variable = 's0aux s1aux p0aux p1aux'
start_point = '0 0 0'
end_point = '1 0 0'
num_points = 500
sort_by = id
[]
[]
[Executioner]
type = Steady
solve_type = NEWTON
nl_abs_tol = 1e-6
[]
[BCs]
[sleft]
type = DirichletBC
variable = s1
value = 0
boundary = left
[]
[sright]
type = DirichletBC
variable = s1
value = 1
boundary = right
[]
[]
[Outputs]
csv = true
execute_on = timestep_end
[]
(modules/porous_flow/test/tests/dirackernels/bh03.i)
# fully-saturated
# injection
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 1
xmin = 1
xmax = 3
ymin = -1
ymax = 1
zmin = -1
zmax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
initial_condition = 0
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[borehole_total_outflow_mass]
type = PorousFlowSumQuantity
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1e-7
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e9
viscosity = 1e-3
density0 = 1000
thermal_expansion = 0
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-12 0 0 0 1E-12 0 0 0 1E-12'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[]
[DiracKernels]
[bh]
type = PorousFlowPeacemanBorehole
variable = pp
SumQuantityUO = borehole_total_outflow_mass
point_file = bh03.bh
function_of = pressure
fluid_phase = 0
bottom_p_or_t = 'insitu_pp'
unit_weight = '0 0 0'
use_mobility = true
character = -1
[]
[]
[Postprocessors]
[bh_report]
type = PorousFlowPlotQuantity
uo = borehole_total_outflow_mass
[]
[fluid_mass0]
type = PorousFlowFluidMass
execute_on = timestep_begin
[]
[fluid_mass1]
type = PorousFlowFluidMass
execute_on = timestep_end
[]
[zmass_error]
type = FunctionValuePostprocessor
function = mass_bal_fcn
execute_on = timestep_end
indirect_dependencies = 'fluid_mass1 fluid_mass0 bh_report'
[]
[p0]
type = PointValue
variable = pp
point = '2 0 0'
execute_on = timestep_end
[]
[]
[Functions]
[mass_bal_fcn]
type = ParsedFunction
expression = abs((a-c+d)/2/(a+c))
symbol_names = 'a c d'
symbol_values = 'fluid_mass1 fluid_mass0 bh_report'
[]
[insitu_pp]
type = ParsedFunction
expression = '0.5e7*x' #bh is located at x=2
[]
[]
[Preconditioning]
[usual]
type = SMP
full = true
petsc_options = '-snes_converged_reason'
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -ksp_max_it'
petsc_options_value = 'bcgs bjacobi 1E-10 1E-10 10000 30'
[]
[]
[Executioner]
type = Transient
end_time = 0.5
dt = 1E-2
solve_type = NEWTON
[]
[Outputs]
file_base = bh03
exodus = false
csv = true
execute_on = timestep_end
[]
(modules/porous_flow/examples/co2_intercomparison/1Dradial/1Dradial.i)
# Intercomparison problem 3: Radial flow from an injection well
#
# From Pruess et al, Code intercomparison builds confidence in
# numerical simulation models for geologic disposal of CO2, Energy 29 (2004)
#
# A variation with zero salinity can be run by changing the initial condition
# of the AuxVariable xnacl
[Mesh]
type = GeneratedMesh
dim = 1
nx = 500
xmax = 10000
bias_x = 1.01
coord_type = 'RZ'
rz_coord_axis = Y
[]
[GlobalParams]
PorousFlowDictator = 'dictator'
gravity = '0 0 0'
[]
[AuxVariables]
[pressure_liquid]
order = CONSTANT
family = MONOMIAL
[]
[saturation_gas]
order = CONSTANT
family = MONOMIAL
[]
[x1]
order = CONSTANT
family = MONOMIAL
[]
[y0]
order = CONSTANT
family = MONOMIAL
[]
[xnacl]
initial_condition = 0.15
[]
[]
[AuxKernels]
[pressure_liquid]
type = PorousFlowPropertyAux
variable = pressure_liquid
property = pressure
phase = 0
execute_on = 'timestep_end'
[]
[saturation_gas]
type = PorousFlowPropertyAux
variable = saturation_gas
property = saturation
phase = 1
execute_on = 'timestep_end'
[]
[x1]
type = PorousFlowPropertyAux
variable = x1
property = mass_fraction
phase = 0
fluid_component = 1
execute_on = 'timestep_end'
[]
[y0]
type = PorousFlowPropertyAux
variable = y0
property = mass_fraction
phase = 1
fluid_component = 0
execute_on = 'timestep_end'
[]
[]
[Variables]
[pgas]
initial_condition = 12e6
[]
[zi]
initial_condition = 0
scaling = 1e4
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pgas
[]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = pgas
[]
[mass1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = zi
[]
[flux1]
type = PorousFlowAdvectiveFlux
fluid_component = 1
variable = zi
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pgas zi'
number_fluid_phases = 2
number_fluid_components = 3
[]
[pc]
type = PorousFlowCapillaryPressureVG
alpha = 5.099e-5
m = 0.457
sat_lr = 0.0
pc_max = 1e7
[]
[fs]
type = PorousFlowBrineCO2
brine_fp = brine
co2_fp = co2
capillary_pressure = pc
[]
[]
[FluidProperties]
[co2sw]
type = CO2FluidProperties
[]
[co2]
type = TabulatedBicubicFluidProperties
fp = co2sw
[]
[water]
type = Water97FluidProperties
[]
[watertab]
type = TabulatedBicubicFluidProperties
fp = water
temperature_min = 273.15
temperature_max = 573.15
fluid_property_file = water_fluid_properties.csv
save_file = false
[]
[brine]
type = BrineFluidProperties
water_fp = watertab
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = '45'
[]
[brineco2]
type = PorousFlowFluidState
gas_porepressure = 'pgas'
z = 'zi'
temperature_unit = Celsius
xnacl = 'xnacl'
capillary_pressure = pc
fluid_state = fs
[]
[porosity]
type = PorousFlowPorosityConst
porosity = '0.12'
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-13 0 0 0 1e-13 0 0 0 1e-13'
[]
[relperm_water]
type = PorousFlowRelativePermeabilityVG
m = 0.457
phase = 0
s_res = 0.3
sum_s_res = 0.35
[]
[relperm_gas]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 1
s_res = 0.05
sum_s_res = 0.35
[]
[]
[BCs]
[rightwater]
type = PorousFlowPiecewiseLinearSink
boundary = 'right'
variable = pgas
use_mobility = true
PorousFlowDictator = dictator
fluid_phase = 0
multipliers = '0 1e9'
PT_shift = '12e6'
pt_vals = '0 1e9'
mass_fraction_component = 0
use_relperm = true
[]
[rightco2]
type = PorousFlowPiecewiseLinearSink
variable = zi
boundary = 'right'
use_mobility = true
PorousFlowDictator = dictator
fluid_phase = 1
multipliers = '0 1e9'
PT_shift = '12e6'
pt_vals = '0 1e9'
mass_fraction_component = 1
use_relperm = true
[]
[]
[DiracKernels]
[source]
type = PorousFlowSquarePulsePointSource
point = '0 0 0'
mass_flux = 1
variable = zi
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -sub_pc_type -sub_pc_factor_shift_type'
petsc_options_value = 'gmres bjacobi lu NONZERO'
[]
[]
[Executioner]
type = Transient
solve_type = NEWTON
end_time = 8.64e8
nl_max_its = 25
l_max_its = 100
dtmax = 5e6
[TimeStepper]
type = IterationAdaptiveDT
dt = 100
[]
[]
[VectorPostprocessors]
[vars]
type = NodalValueSampler
sort_by = x
variable = 'pgas zi xnacl'
execute_on = 'timestep_end'
outputs = spatial
[]
[auxvars]
type = ElementValueSampler
sort_by = x
variable = 'saturation_gas x1 y0'
execute_on = 'timestep_end'
outputs = spatial
[]
[]
[Postprocessors]
[pgas]
type = PointValue
point = '25.25 0 0'
variable = pgas
outputs = time
[]
[sgas]
type = PointValue
point = '25.25 0 0'
variable = saturation_gas
outputs = time
[]
[zi]
type = PointValue
point = '25.25 0 0'
variable = zi
outputs = time
[]
[massgas]
type = PorousFlowFluidMass
fluid_component = 1
outputs = time
[]
[x1]
type = PointValue
point = '25.25 0 0'
variable = x1
outputs = time
[]
[y0]
type = PointValue
point = '25.25 0 0'
variable = y0
outputs = time
[]
[xnacl]
type = PointValue
point = '25.25 0 0'
variable = xnacl
outputs = time
[]
[]
[Outputs]
print_linear_residuals = false
perf_graph = true
sync_times = '2.592e6 8.64e6 8.64e7 8.64e8'
[time]
type = CSV
[]
[spatial]
type = CSV
sync_only = true
[]
[]
(modules/porous_flow/test/tests/dirackernels/bh_except01.i)
# PorousFlowPeacemanBorehole exception test
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 1
xmin = -1
xmax = 1
ymin = -1
ymax = 1
zmin = -1
zmax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
initial_condition = 1E7
[]
[]
[Kernels]
[mass0]
type = TimeDerivative
variable = pp
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[borehole_total_outflow_mass]
type = PorousFlowSumQuantity
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1e-7
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e9
viscosity = 1e-3
density0 = 1000
thermal_expansion = 0
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-12 0 0 0 1E-12 0 0 0 1E-12'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[]
[DiracKernels]
[bh]
type = PorousFlowPeacemanBorehole
bottom_p_or_t = 0
fluid_phase = 1
point_file = bh02.bh
SumQuantityUO = borehole_total_outflow_mass
variable = pp
unit_weight = '0 0 0'
character = 1
[]
[]
[Postprocessors]
[bh_report]
type = PorousFlowPlotQuantity
uo = borehole_total_outflow_mass
[]
[fluid_mass0]
type = PorousFlowFluidMass
execute_on = timestep_begin
[]
[fluid_mass1]
type = PorousFlowFluidMass
execute_on = timestep_end
[]
[zmass_error]
type = FunctionValuePostprocessor
function = mass_bal_fcn
execute_on = timestep_end
[]
[p0]
type = PointValue
variable = pp
point = '0 0 0'
execute_on = timestep_end
[]
[]
[Functions]
[mass_bal_fcn]
type = ParsedFunction
expression = abs((a-c+d)/2/(a+c))
symbol_names = 'a c d'
symbol_values = 'fluid_mass1 fluid_mass0 bh_report'
[]
[]
[Preconditioning]
[usual]
type = SMP
full = true
petsc_options = '-snes_converged_reason'
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -ksp_max_it'
petsc_options_value = 'bcgs bjacobi 1E-10 1E-10 10000 30'
[]
[]
[Executioner]
type = Transient
end_time = 0.5
dt = 1E-2
solve_type = NEWTON
[]
(modules/porous_flow/test/tests/capillary_pressure/vangenuchten2.i)
# Test van Genuchten relative permeability curve by varying saturation over the mesh
# van Genuchten exponent m = 0.5 for both phases
# No residual saturation in either phase
[Mesh]
type = GeneratedMesh
dim = 1
nx = 500
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[p0]
initial_condition = 1e6
[]
[s1]
[]
[]
[AuxVariables]
[s0aux]
family = MONOMIAL
order = CONSTANT
[]
[s1aux]
family = MONOMIAL
order = CONSTANT
[]
[p0aux]
family = MONOMIAL
order = CONSTANT
[]
[p1aux]
family = MONOMIAL
order = CONSTANT
[]
[]
[AuxKernels]
[s0]
type = PorousFlowPropertyAux
property = saturation
phase = 0
variable = s0aux
[]
[s1]
type = PorousFlowPropertyAux
property = saturation
phase = 1
variable = s1aux
[]
[p0]
type = PorousFlowPropertyAux
property = pressure
phase = 0
variable = p0aux
[]
[p1]
type = PorousFlowPropertyAux
property = pressure
phase = 1
variable = p1aux
[]
[]
[Functions]
[s1]
type = ParsedFunction
expression = x
[]
[]
[ICs]
[s1]
type = FunctionIC
variable = s1
function = s1
[]
[]
[Kernels]
[p0]
type = Diffusion
variable = p0
[]
[s1]
type = Diffusion
variable = s1
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'p0 s1'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
alpha = 1e-5
m = 0.5
sat_lr = 0.1
log_extension = true
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePS
phase0_porepressure = p0
phase1_saturation = s1
capillary_pressure = pc
[]
[kr0]
type = PorousFlowRelativePermeabilityVG
phase = 0
m = 0.5
[]
[kr1]
type = PorousFlowRelativePermeabilityCorey
phase = 1
n = 2
[]
[]
[VectorPostprocessors]
[vpp]
type = LineValueSampler
variable = 's0aux s1aux p0aux p1aux'
start_point = '0 0 0'
end_point = '1 0 0'
num_points = 500
sort_by = id
[]
[]
[Executioner]
type = Steady
solve_type = NEWTON
nl_abs_tol = 1e-6
[]
[BCs]
[sleft]
type = DirichletBC
variable = s1
value = 0
boundary = left
[]
[sright]
type = DirichletBC
variable = s1
value = 1
boundary = right
[]
[]
[Outputs]
csv = true
execute_on = timestep_end
[]
(modules/porous_flow/test/tests/jacobian/pls04.i)
# PorousFlowPiecewiseLinearSink with 2-phase, 3-components, with enthalpy, internal_energy, and thermal_conductivity
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 2
nz = 1
xmin = -1
xmax = 1
ymin = -1
ymax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[ppwater]
[]
[ppgas]
[]
[massfrac_ph0_sp0]
[]
[massfrac_ph0_sp1]
[]
[massfrac_ph1_sp0]
[]
[massfrac_ph1_sp1]
[]
[temp]
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'temp ppwater ppgas massfrac_ph0_sp0 massfrac_ph0_sp1 massfrac_ph1_sp0 massfrac_ph1_sp1'
number_fluid_phases = 2
number_fluid_components = 3
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[ICs]
[temp]
type = RandomIC
variable = temp
min = 1
max = 2
[]
[ppwater]
type = RandomIC
variable = ppwater
min = -1
max = 0
[]
[ppgas]
type = RandomIC
variable = ppgas
min = 0
max = 1
[]
[massfrac_ph0_sp0]
type = RandomIC
variable = massfrac_ph0_sp0
min = 0
max = 1
[]
[massfrac_ph0_sp1]
type = RandomIC
variable = massfrac_ph0_sp1
min = 0
max = 1
[]
[massfrac_ph1_sp0]
type = RandomIC
variable = massfrac_ph1_sp0
min = 0
max = 1
[]
[massfrac_ph1_sp1]
type = RandomIC
variable = massfrac_ph1_sp1
min = 0
max = 1
[]
[]
[Kernels]
[dummy_temp]
type = TimeDerivative
variable = temp
[]
[dummy_ppwater]
type = TimeDerivative
variable = ppwater
[]
[dummy_ppgas]
type = TimeDerivative
variable = ppgas
[]
[dummy_m00]
type = TimeDerivative
variable = massfrac_ph0_sp0
[]
[dummy_m01]
type = TimeDerivative
variable = massfrac_ph0_sp1
[]
[dummy_m10]
type = TimeDerivative
variable = massfrac_ph1_sp0
[]
[dummy_m11]
type = TimeDerivative
variable = massfrac_ph1_sp1
[]
[]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 1.5
density0 = 1
thermal_expansion = 0
viscosity = 1
cv = 1.1
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 0.5
density0 = 0.5
thermal_expansion = 0
viscosity = 1.4
cv = 1.8
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = temp
[]
[ppss]
type = PorousFlow2PhasePP
phase0_porepressure = ppwater
phase1_porepressure = ppgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph0_sp1 massfrac_ph1_sp0 massfrac_ph1_sp1'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 2 0 0 0 3'
[]
[relperm0]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[relperm1]
type = PorousFlowRelativePermeabilityCorey
n = 3
phase = 1
[]
[thermal_conductivity]
type = PorousFlowThermalConductivityIdeal
dry_thermal_conductivity = '0.1 0.2 0.3 0.2 0 0.1 0.3 0.1 0.1'
wet_thermal_conductivity = '10 2 31 2 40 1 31 1 10'
exponent = 0.5
[]
[]
[BCs]
[flux_w]
type = PorousFlowPiecewiseLinearSink
boundary = 'left'
pt_vals = '-1 -0.5 0'
multipliers = '1 2 4'
variable = ppwater
mass_fraction_component = 0
fluid_phase = 0
use_relperm = true
use_mobility = true
use_enthalpy = true
flux_function = 'x*y'
[]
[flux_g]
type = PorousFlowPiecewiseLinearSink
boundary = 'top'
pt_vals = '0 0.5 1'
multipliers = '1 -2 4'
mass_fraction_component = 0
variable = ppgas
fluid_phase = 1
use_relperm = true
use_mobility = true
use_internal_energy = true
flux_function = '-x*y'
[]
[flux_1]
type = PorousFlowPiecewiseLinearSink
boundary = 'right'
pt_vals = '0 0.5 1'
multipliers = '1 3 4'
mass_fraction_component = 1
variable = massfrac_ph0_sp0
fluid_phase = 0
use_relperm = true
use_mobility = true
use_internal_energy = true
[]
[flux_2]
type = PorousFlowPiecewiseLinearSink
boundary = 'back top'
pt_vals = '0 0.5 1'
multipliers = '0 1 -3'
mass_fraction_component = 1
variable = massfrac_ph1_sp0
fluid_phase = 1
use_relperm = true
use_mobility = true
use_enthalpy = true
flux_function = '0.5*x*y'
[]
[flux_3]
type = PorousFlowPiecewiseLinearSink
boundary = 'right'
pt_vals = '0 0.5 1'
multipliers = '1 3 4'
mass_fraction_component = 2
variable = ppwater
fluid_phase = 0
use_relperm = true
use_enthalpy = true
use_mobility = true
[]
[flux_4]
type = PorousFlowPiecewiseLinearSink
boundary = 'back top'
pt_vals = '0 0.5 1'
multipliers = '0 1 -3'
mass_fraction_component = 2
variable = massfrac_ph1_sp0
fluid_phase = 1
use_relperm = true
use_mobility = true
flux_function = '-0.5*x*y'
use_enthalpy = true
use_thermal_conductivity = true
[]
[]
[Preconditioning]
[check]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -snes_type'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000 test'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
[Outputs]
file_base = pls04
[]
(modules/porous_flow/examples/lava_lamp/1phase_convection.i)
# Two phase density-driven convection of dissolved CO2 in brine
#
# The model starts with CO2 in the liquid phase only. The CO2 diffuses into the brine.
# As the density of the CO2-saturated brine is greater
# than the unsaturated brine, a gravitational instability arises and density-driven
# convection of CO2-rich fingers descend into the unsaturated brine.
#
# The instability is seeded by a random perturbation to the porosity field.
# Mesh adaptivity is used to refine the mesh as the fingers form.
#
# Note: this model is computationally expensive, so should be run with multiple cores.
[GlobalParams]
PorousFlowDictator = 'dictator'
gravity = '0 -9.81 0'
[]
[Adaptivity]
max_h_level = 2
marker = marker
initial_marker = initial
initial_steps = 2
[Indicators]
[indicator]
type = GradientJumpIndicator
variable = zi
[]
[]
[Markers]
[marker]
type = ErrorFractionMarker
indicator = indicator
refine = 0.8
[]
[initial]
type = BoxMarker
bottom_left = '0 1.95 0'
top_right = '2 2 0'
inside = REFINE
outside = DO_NOTHING
[]
[]
[]
[Mesh]
type = GeneratedMesh
dim = 2
ymin = 1.5
ymax = 2
xmax = 2
ny = 20
nx = 40
bias_y = 0.95
[]
[AuxVariables]
[xnacl]
initial_condition = 0.01
[]
[saturation_gas]
order = FIRST
family = MONOMIAL
[]
[xco2l]
order = FIRST
family = MONOMIAL
[]
[density_liquid]
order = FIRST
family = MONOMIAL
[]
[porosity]
order = CONSTANT
family = MONOMIAL
[]
[]
[AuxKernels]
[saturation_gas]
type = PorousFlowPropertyAux
variable = saturation_gas
property = saturation
phase = 1
execute_on = 'timestep_end'
[]
[xco2l]
type = PorousFlowPropertyAux
variable = xco2l
property = mass_fraction
phase = 0
fluid_component = 1
execute_on = 'timestep_end'
[]
[density_liquid]
type = PorousFlowPropertyAux
variable = density_liquid
property = density
phase = 0
execute_on = 'timestep_end'
[]
[]
[Variables]
[pgas]
[]
[zi]
scaling = 1e4
[]
[]
[ICs]
[pressure]
type = FunctionIC
function = 10e6-9.81*1000*y
variable = pgas
[]
[zi]
type = ConstantIC
value = 0
variable = zi
[]
[porosity]
type = RandomIC
variable = porosity
min = 0.25
max = 0.275
seed = 0
[]
[]
[BCs]
[top]
type = DirichletBC
value = 0.04
variable = zi
boundary = top
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pgas
[]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = pgas
[]
[diff0]
type = PorousFlowDispersiveFlux
fluid_component = 0
variable = pgas
disp_long = '0 0'
disp_trans = '0 0'
[]
[mass1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = zi
[]
[flux1]
type = PorousFlowAdvectiveFlux
fluid_component = 1
variable = zi
[]
[diff1]
type = PorousFlowDispersiveFlux
fluid_component = 1
variable = zi
disp_long = '0 0'
disp_trans = '0 0'
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pgas zi'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureConst
pc = 0
[]
[fs]
type = PorousFlowBrineCO2
brine_fp = brine
co2_fp = co2
capillary_pressure = pc
[]
[]
[FluidProperties]
[co2sw]
type = CO2FluidProperties
[]
[co2]
type = TabulatedBicubicFluidProperties
fp = co2sw
[]
[brine]
type = BrineFluidProperties
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = '45'
[]
[brineco2]
type = PorousFlowFluidState
gas_porepressure = 'pgas'
z = 'zi'
temperature_unit = Celsius
xnacl = 'xnacl'
capillary_pressure = pc
fluid_state = fs
[]
[porosity]
type = PorousFlowPorosityConst
porosity = porosity
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-11 0 0 0 1e-11 0 0 0 1e-11'
[]
[relperm_water]
type = PorousFlowRelativePermeabilityCorey
phase = 0
n = 2
s_res = 0.1
sum_s_res = 0.2
[]
[relperm_gas]
type = PorousFlowRelativePermeabilityCorey
phase = 1
n = 2
s_res = 0.1
sum_s_res = 0.2
[]
[diffusivity]
type = PorousFlowDiffusivityConst
diffusion_coeff = '2e-9 2e-9 2e-9 2e-9'
tortuosity = '1 1'
[]
[]
[Preconditioning]
active = basic
[mumps_is_best_for_parallel_jobs]
type = SMP
full = true
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = ' lu mumps'
[]
[basic]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -sub_pc_type -sub_pc_factor_shift_type -pc_asm_overlap'
petsc_options_value = 'gmres asm lu NONZERO 2 '
[]
[]
[Executioner]
type = Transient
solve_type = NEWTON
end_time = 1e6
nl_max_its = 25
l_max_its = 100
dtmax = 1e4
nl_abs_tol = 1e-6
[TimeStepper]
type = IterationAdaptiveDT
dt = 100
growth_factor = 2
cutback_factor = 0.5
[]
[]
[Functions]
[flux]
type = ParsedFunction
symbol_values = 'delta_xco2 dt'
symbol_names = 'dx dt'
expression = 'dx/dt'
[]
[]
[Postprocessors]
[total_co2_in_gas]
type = PorousFlowFluidMass
phase = 1
fluid_component = 1
[]
[total_co2_in_liquid]
type = PorousFlowFluidMass
phase = 0
fluid_component = 1
[]
[numdofs]
type = NumDOFs
[]
[delta_xco2]
type = ChangeOverTimePostprocessor
postprocessor = total_co2_in_liquid
[]
[dt]
type = TimestepSize
[]
[flux]
type = FunctionValuePostprocessor
function = flux
[]
[]
[Outputs]
print_linear_residuals = false
perf_graph = true
exodus = true
csv = true
[]
(modules/porous_flow/test/tests/fluidstate/theis_brineco2_nonisothermal.i)
# Two phase nonisothermal Theis problem: Flow from single source.
# Constant rate injection 2 kg/s of cold CO2 into warm reservoir
# 1D cylindrical mesh
# Initially, system has only a liquid phase, until enough gas is injected
# to form a gas phase, in which case the system becomes two phase.
[Mesh]
[mesh]
type = GeneratedMeshGenerator
dim = 1
nx = 40
xmin = 0.1
xmax = 200
bias_x = 1.05
[]
coord_type = RZ
rz_coord_axis = Y
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[AuxVariables]
[saturation_gas]
order = CONSTANT
family = MONOMIAL
[]
[x1]
order = CONSTANT
family = MONOMIAL
[]
[y0]
order = CONSTANT
family = MONOMIAL
[]
[]
[AuxKernels]
[saturation_gas]
type = PorousFlowPropertyAux
variable = saturation_gas
property = saturation
phase = 1
execute_on = timestep_end
[]
[x1]
type = PorousFlowPropertyAux
variable = x1
property = mass_fraction
phase = 0
fluid_component = 1
execute_on = timestep_end
[]
[y0]
type = PorousFlowPropertyAux
variable = y0
property = mass_fraction
phase = 1
fluid_component = 0
execute_on = timestep_end
[]
[]
[Variables]
[pgas]
initial_condition = 20e6
[]
[zi]
initial_condition = 0
[]
[xnacl]
initial_condition = 0.1
[]
[temperature]
initial_condition = 70
scaling = 1e-4
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pgas
[]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = pgas
[]
[mass1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = zi
[]
[flux1]
type = PorousFlowAdvectiveFlux
fluid_component = 1
variable = zi
[]
[mass2]
type = PorousFlowMassTimeDerivative
fluid_component = 2
variable = xnacl
[]
[flux2]
type = PorousFlowAdvectiveFlux
fluid_component = 2
variable = xnacl
[]
[energy]
type = PorousFlowEnergyTimeDerivative
variable = temperature
[]
[heatadv]
type = PorousFlowHeatAdvection
variable = temperature
[]
[conduction]
type = PorousFlowHeatConduction
variable = temperature
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pgas zi xnacl temperature'
number_fluid_phases = 2
number_fluid_components = 3
[]
[pc]
type = PorousFlowCapillaryPressureConst
pc = 0
[]
[fs]
type = PorousFlowBrineCO2
brine_fp = brine
co2_fp = co2
capillary_pressure = pc
[]
[]
[FluidProperties]
[co2]
type = CO2FluidProperties
[]
[brine]
type = BrineFluidProperties
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = temperature
[]
[brineco2]
type = PorousFlowFluidState
gas_porepressure = pgas
z = zi
temperature = temperature
temperature_unit = Celsius
xnacl = xnacl
capillary_pressure = pc
fluid_state = fs
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.2
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-12 0 0 0 1e-12 0 0 0 1e-12'
[]
[relperm_water]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
s_res = 0.1
sum_s_res = 0.1
[]
[relperm_gas]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 1
[]
[rockheat]
type = PorousFlowMatrixInternalEnergy
specific_heat_capacity = 1000
density = 2500
[]
[rock_thermal_conductivity]
type = PorousFlowThermalConductivityIdeal
dry_thermal_conductivity = '50 0 0 0 50 0 0 0 50'
[]
[]
[BCs]
[cold_gas]
type = DirichletBC
boundary = left
variable = temperature
value = 20
[]
[gas_injecton]
type = PorousFlowSink
boundary = left
variable = zi
flux_function = -0.159155
[]
[rightwater]
type = DirichletBC
boundary = right
value = 20e6
variable = pgas
[]
[righttemp]
type = DirichletBC
boundary = right
value = 70
variable = temperature
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -sub_pc_type -sub_pc_factor_shift_type -pc_asm_overlap'
petsc_options_value = 'gmres asm lu NONZERO 2'
[]
[]
[Executioner]
type = Transient
solve_type = NEWTON
end_time = 1e4
nl_abs_tol = 1e-7
nl_rel_tol = 1e-5
[TimeStepper]
type = IterationAdaptiveDT
dt = 1
growth_factor = 1.5
[]
[]
[Postprocessors]
[pgas]
type = PointValue
point = '2 0 0'
variable = pgas
[]
[sgas]
type = PointValue
point = '2 0 0'
variable = saturation_gas
[]
[zi]
type = PointValue
point = '2 0 0'
variable = zi
[]
[temperature]
type = PointValue
point = '2 0 0'
variable = temperature
[]
[massgas]
type = PorousFlowFluidMass
fluid_component = 1
[]
[x1]
type = PointValue
point = '2 0 0'
variable = x1
[]
[y0]
type = PointValue
point = '2 0 0'
variable = y0
[]
[]
[Outputs]
print_linear_residuals = false
perf_graph = true
csv = true
[]
(modules/porous_flow/test/tests/jacobian/brineco2_gas.i)
# Tests correct calculation of properties derivatives in PorousFlowFluidState
# for conditions that give a single gas phase
[Mesh]
type = GeneratedMesh
dim = 2
nx = 2
ny = 2
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[AuxVariables]
[xnacl]
initial_condition = 0.05
[]
[]
[Variables]
[pgas]
[]
[zi]
[]
[]
[ICs]
[pgas]
type = RandomIC
min = 5e4
max = 1e5
variable = pgas
[]
[z]
type = RandomIC
min = 0.9
max = 0.99
variable = zi
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
variable = pgas
fluid_component = 0
[]
[mass1]
type = PorousFlowMassTimeDerivative
variable = zi
fluid_component = 1
[]
[adv0]
type = PorousFlowAdvectiveFlux
variable = pgas
fluid_component = 0
[]
[adv1]
type = PorousFlowAdvectiveFlux
variable = zi
fluid_component = 1
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pgas zi'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
pc_max = 1e3
[]
[fs]
type = PorousFlowBrineCO2
brine_fp = brine
co2_fp = co2
capillary_pressure = pc
[]
[]
[FluidProperties]
[co2]
type = CO2FluidProperties
[]
[brine]
type = BrineFluidProperties
[]
[water]
type = Water97FluidProperties
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = 50
[]
[brineco2]
type = PorousFlowFluidState
gas_porepressure = pgas
z = zi
temperature_unit = Celsius
xnacl = xnacl
capillary_pressure = pc
fluid_state = fs
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-12 0 0 0 1e-12 0 0 0 1e-12'
[]
[relperm0]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[relperm1]
type = PorousFlowRelativePermeabilityCorey
n = 3
phase = 1
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[]
[Executioner]
type = Transient
solve_type = NEWTON
dt = 1
end_time = 1
nl_abs_tol = 1e-12
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[AuxVariables]
[sgas]
family = MONOMIAL
order = CONSTANT
[]
[]
[AuxKernels]
[sgas]
type = PorousFlowPropertyAux
property = saturation
phase = 1
variable = sgas
[]
[]
[Postprocessors]
[sgas_min]
type = ElementExtremeValue
variable = sgas
value_type = min
[]
[sgas_max]
type = ElementExtremeValue
variable = sgas
value_type = max
[]
[]
(modules/porous_flow/test/tests/fluidstate/coldwater_injection.i)
# Cold water injection into 1D hot reservoir (Avdonin, 1964)
#
# To generate results presented in documentation for this problem,
# set xmax = 50 and nx = 250 in the Mesh block, and dtmax = 100 and
# end_time = 1.3e5 in the Executioner block.
[Mesh]
type = GeneratedMesh
dim = 1
nx = 25
xmax = 20
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[AuxVariables]
[temperature]
order = CONSTANT
family = MONOMIAL
[]
[]
[AuxKernels]
[temperature]
type = PorousFlowPropertyAux
variable = temperature
property = temperature
execute_on = 'initial timestep_end'
[]
[]
[Variables]
[pliquid]
initial_condition = 5e6
[]
[h]
scaling = 1e-6
[]
[]
[ICs]
[hic]
type = PorousFlowFluidPropertyIC
variable = h
porepressure = pliquid
property = enthalpy
temperature = 170
temperature_unit = Celsius
fp = water
[]
[]
[BCs]
[pleft]
type = DirichletBC
variable = pliquid
value = 5.05e6
boundary = left
[]
[pright]
type = DirichletBC
variable = pliquid
value = 5e6
boundary = right
[]
[hleft]
type = DirichletBC
variable = h
value = 678.52e3
boundary = left
[]
[hright]
type = DirichletBC
variable = h
value = 721.4e3
boundary = right
[]
[]
[Kernels]
[mass]
type = PorousFlowMassTimeDerivative
variable = pliquid
[]
[massflux]
type = PorousFlowAdvectiveFlux
variable = pliquid
[]
[heat]
type = PorousFlowEnergyTimeDerivative
variable = h
[]
[heatflux]
type = PorousFlowHeatAdvection
variable = h
[]
[heatcond]
type = PorousFlowHeatConduction
variable = h
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pliquid h'
number_fluid_phases = 2
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
pc_max = 1e6
sat_lr = 0.1
m = 0.5
alpha = 1e-5
[]
[fs]
type = PorousFlowWaterVapor
water_fp = water
capillary_pressure = pc
[]
[]
[FluidProperties]
[water]
type = Water97FluidProperties
[]
[]
[Materials]
[watervapor]
type = PorousFlowFluidStateSingleComponent
porepressure = pliquid
enthalpy = h
temperature_unit = Celsius
capillary_pressure = pc
fluid_state = fs
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.2
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1.8e-11 0 0 0 1.8e-11 0 0 0 1.8e-11'
[]
[relperm_water]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
s_res = 0.1
sum_s_res = 0.1
[]
[relperm_gas]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 1
sum_s_res = 0.1
[]
[internal_energy]
type = PorousFlowMatrixInternalEnergy
density = 2900
specific_heat_capacity = 740
[]
[rock_thermal_conductivity]
type = PorousFlowThermalConductivityIdeal
dry_thermal_conductivity = '20 0 0 0 20 0 0 0 20'
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = NEWTON
end_time = 5e3
nl_abs_tol = 1e-10
[TimeStepper]
type = IterationAdaptiveDT
dt = 100
[]
[]
[VectorPostprocessors]
[line]
type = ElementValueSampler
sort_by = x
variable = temperature
execute_on = 'initial timestep_end'
[]
[]
[Outputs]
perf_graph = true
[csv]
type = CSV
execute_on = final
[]
[]
(modules/porous_flow/test/tests/poroperm/PermFromPoro03.i)
# Testing permeability from porosity
# Trivial test, checking calculated permeability is correct
# k = k_anisotropic * B * exp(A * phi)
[Mesh]
type = GeneratedMesh
dim = 1
nx = 3
xmin = 0
xmax = 3
[]
[GlobalParams]
block = 0
PorousFlowDictator = dictator
[]
[Variables]
[pp]
[InitialCondition]
type = ConstantIC
value = 0
[]
[]
[]
[Kernels]
[flux]
type = PorousFlowAdvectiveFlux
gravity = '0 0 0'
variable = pp
[]
[]
[BCs]
[ptop]
type = DirichletBC
variable = pp
boundary = right
value = 0
[]
[pbase]
type = DirichletBC
variable = pp
boundary = left
value = 1
[]
[]
[AuxVariables]
[poro]
order = CONSTANT
family = MONOMIAL
[]
[perm_x]
order = CONSTANT
family = MONOMIAL
[]
[perm_y]
order = CONSTANT
family = MONOMIAL
[]
[perm_z]
order = CONSTANT
family = MONOMIAL
[]
[]
[AuxKernels]
[poro]
type = PorousFlowPropertyAux
property = porosity
variable = poro
[]
[perm_x]
type = PorousFlowPropertyAux
property = permeability
variable = perm_x
row = 0
column = 0
[]
[perm_y]
type = PorousFlowPropertyAux
property = permeability
variable = perm_y
row = 1
column = 1
[]
[perm_z]
type = PorousFlowPropertyAux
property = permeability
variable = perm_z
row = 2
column = 2
[]
[]
[Postprocessors]
[perm_x_bottom]
type = PointValue
variable = perm_x
point = '0 0 0'
[]
[perm_y_bottom]
type = PointValue
variable = perm_y
point = '0 0 0'
[]
[perm_z_bottom]
type = PointValue
variable = perm_z
point = '0 0 0'
[]
[perm_x_top]
type = PointValue
variable = perm_x
point = '3 0 0'
[]
[perm_y_top]
type = PointValue
variable = perm_y
point = '3 0 0'
[]
[perm_z_top]
type = PointValue
variable = perm_z
point = '3 0 0'
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
# unimportant in this fully-saturated test
m = 0.8
alpha = 1e-4
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2.2e9
viscosity = 1e-3
density0 = 1000
thermal_expansion = 0
[]
[]
[Materials]
[permeability]
type = PorousFlowPermeabilityExponential
k_anisotropy = '1 0 0 0 2 0 0 0 0.1'
poroperm_function = exp_k
A = 10
B = 1e-8
[]
[temperature]
type = PorousFlowTemperature
[]
[massfrac]
type = PorousFlowMassFraction
[]
[eff_fluid_pressure]
type = PorousFlowEffectiveFluidPressure
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosity
porosity_zero = 0.1
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 0 # unimportant in this fully-saturated situation
phase = 0
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
[]
[]
[Executioner]
solve_type = Newton
type = Steady
l_tol = 1E-5
nl_abs_tol = 1E-3
nl_rel_tol = 1E-8
l_max_its = 200
nl_max_its = 400
petsc_options_iname = '-pc_type -pc_asm_overlap -sub_pc_type -ksp_type -ksp_gmres_restart'
petsc_options_value = ' asm 2 lu gmres 200'
[]
[Outputs]
csv = true
execute_on = 'timestep_end'
[]
(modules/porous_flow/test/tests/hysteresis/2phasePS_jac.i)
# Test of derivatives computed in PorousFlow2PhaseHysPS
[Mesh]
[mesh]
type = GeneratedMeshGenerator
dim = 1
[]
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '-1 0 0'
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
number_fluid_phases = 2
number_fluid_components = 2
porous_flow_vars = 'pp0 sat1'
[]
[]
[Variables]
[pp0]
[]
[sat1]
initial_condition = 0.2
[]
[]
[Kernels]
[mass_conservation0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp0
[]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = pp0
[]
[mass_conservation1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = sat1
[]
[flux1]
type = PorousFlowAdvectiveFlux
fluid_component = 1
variable = sat1
[]
[]
[AuxVariables]
[massfrac_ph0_sp0]
initial_condition = 1
[]
[massfrac_ph1_sp0]
initial_condition = 0
[]
[]
[FluidProperties]
[simple_fluid_0]
type = SimpleFluidProperties
bulk_modulus = 10
viscosity = 1
[]
[simple_fluid_1]
type = SimpleFluidProperties
bulk_modulus = 1
viscosity = 3
[]
[]
[Materials]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[temperature]
type = PorousFlowTemperature
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph1_sp0'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid_0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid_1
phase = 1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 1 0 0 0 1'
[]
[relperm_water]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[relperm_gas]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 1
[]
[hys_order_material]
type = PorousFlowHysteresisOrder
[]
[pc_calculator]
type = PorousFlow2PhaseHysPS
alpha_d = 10.0
alpha_w = 7.0
n_d = 1.5
n_w = 1.9
S_l_min = 0.1
S_lr = 0.2
S_gr_max = 0.3
Pc_max = 12.0
high_ratio = 0.9
low_extension_type = quadratic
high_extension_type = power
phase0_porepressure = pp0
phase1_saturation = sat1
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
petsc_options = '-snes_check_jacobian'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
(modules/porous_flow/test/tests/poroperm/PermTensorFromVar02.i)
# Testing permeability calculated from scalar and tensor
# Trivial test, checking calculated permeability is correct
# when scalar is a FunctionAux.
# k = k_anisotropy * perm
[Mesh]
type = GeneratedMesh
dim = 1
nx = 3
xmin = 0
xmax = 3
[]
[GlobalParams]
block = 0
PorousFlowDictator = dictator
[]
[Variables]
[pp]
[InitialCondition]
type = ConstantIC
value = 0
[]
[]
[]
[Kernels]
[flux]
type = PorousFlowAdvectiveFlux
gravity = '0 0 0'
variable = pp
[]
[]
[BCs]
[ptop]
type = DirichletBC
variable = pp
boundary = right
value = 0
[]
[pbase]
type = DirichletBC
variable = pp
boundary = left
value = 1
[]
[]
[Functions]
[perm_fn]
type = ParsedFunction
expression = '2*(x+1)'
[]
[]
[AuxVariables]
[perm_var]
order = CONSTANT
family = MONOMIAL
[]
[perm_x]
order = CONSTANT
family = MONOMIAL
[]
[perm_y]
order = CONSTANT
family = MONOMIAL
[]
[perm_z]
order = CONSTANT
family = MONOMIAL
[]
[]
[AuxKernels]
[perm_var]
type = FunctionAux
function = perm_fn
variable = perm_var
[]
[perm_x]
type = PorousFlowPropertyAux
property = permeability
variable = perm_x
row = 0
column = 0
[]
[perm_y]
type = PorousFlowPropertyAux
property = permeability
variable = perm_y
row = 1
column = 1
[]
[perm_z]
type = PorousFlowPropertyAux
property = permeability
variable = perm_z
row = 2
column = 2
[]
[]
[Postprocessors]
[perm_x_left]
type = PointValue
variable = perm_x
point = '0.5 0 0'
[]
[perm_y_left]
type = PointValue
variable = perm_y
point = '0.5 0 0'
[]
[perm_z_left]
type = PointValue
variable = perm_z
point = '0.5 0 0'
[]
[perm_x_right]
type = PointValue
variable = perm_x
point = '2.5 0 0'
[]
[perm_y_right]
type = PointValue
variable = perm_y
point = '2.5 0 0'
[]
[perm_z_right]
type = PointValue
variable = perm_z
point = '2.5 0 0'
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
# unimportant in this fully-saturated test
m = 0.8
alpha = 1e-4
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
[]
[]
[Materials]
[permeability]
type = PorousFlowPermeabilityTensorFromVar
k_anisotropy = '1 0 0 0 2 0 0 0 0.1'
perm = perm_var
[]
[temperature]
type = PorousFlowTemperature
[]
[massfrac]
type = PorousFlowMassFraction
[]
[eff_fluid_pressure]
type = PorousFlowEffectiveFluidPressure
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosity
porosity_zero = 0.1
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 0 # unimportant in this fully-saturated situation
phase = 0
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
[]
[]
[Executioner]
solve_type = Newton
type = Steady
l_tol = 1E-5
nl_abs_tol = 1E-3
nl_rel_tol = 1E-8
l_max_its = 200
nl_max_its = 400
petsc_options_iname = '-pc_type -pc_asm_overlap -sub_pc_type -ksp_type -ksp_gmres_restart'
petsc_options_value = ' asm 2 lu gmres 200'
[]
[Outputs]
csv = true
execute_on = 'timestep_end'
[]
(modules/porous_flow/test/tests/jacobian/waterncg_liquid.i)
# Tests correct calculation of properties derivatives in PorousFlowWaterNCG
# for conditions that give a single liquid phase
[Mesh]
type = GeneratedMesh
dim = 2
nx = 2
ny = 2
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[Variables]
[pgas]
[]
[z]
[]
[]
[ICs]
[pgas]
type = RandomIC
min = 6e6
max = 8e6
variable = pgas
[]
[z]
type = RandomIC
min = 0.01
max = 0.05
variable = z
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
variable = pgas
fluid_component = 0
[]
[mass1]
type = PorousFlowMassTimeDerivative
variable = z
fluid_component = 1
[]
[adv0]
type = PorousFlowAdvectiveFlux
variable = pgas
fluid_component = 0
[]
[adv1]
type = PorousFlowAdvectiveFlux
variable = z
fluid_component = 1
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pgas z'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
pc_max = 1e4
[]
[fs]
type = PorousFlowWaterNCG
water_fp = water
gas_fp = co2
capillary_pressure = pc
[]
[]
[FluidProperties]
[co2]
type = CO2FluidProperties
[]
[water]
type = Water97FluidProperties
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = 50
[]
[waterncg]
type = PorousFlowFluidState
gas_porepressure = pgas
z = z
temperature_unit = Celsius
capillary_pressure = pc
fluid_state = fs
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-12 0 0 0 1e-12 0 0 0 1e-12'
[]
[relperm0]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[relperm1]
type = PorousFlowRelativePermeabilityCorey
n = 3
phase = 1
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[]
[Executioner]
type = Transient
solve_type = NEWTON
dt = 1
end_time = 1
nl_abs_tol = 1e-12
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[AuxVariables]
[sgas]
family = MONOMIAL
order = CONSTANT
[]
[]
[AuxKernels]
[sgas]
type = PorousFlowPropertyAux
property = saturation
phase = 1
variable = sgas
[]
[]
[Postprocessors]
[sgas_min]
type = ElementExtremeValue
variable = sgas
value_type = min
[]
[sgas_max]
type = ElementExtremeValue
variable = sgas
value_type = max
[]
[]
(modules/porous_flow/test/tests/pressure_pulse/pressure_pulse_1d.i)
# Pressure pulse in 1D with 1 phase - transient
[Mesh]
type = GeneratedMesh
dim = 1
nx = 10
xmin = 0
xmax = 100
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
initial_condition = 2E6
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
[]
[flux]
type = PorousFlowAdvectiveFlux
variable = pp
gravity = '0 0 0'
fluid_component = 0
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1e-7
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e9
density0 = 1000
thermal_expansion = 0
viscosity = 1e-3
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-15 0 0 0 1E-15 0 0 0 1E-15'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 0
phase = 0
[]
[]
[BCs]
[left]
type = DirichletBC
boundary = left
value = 3E6
variable = pp
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-20 10000'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1E3
end_time = 1E4
[]
[Postprocessors]
[p000]
type = PointValue
variable = pp
point = '0 0 0'
execute_on = 'initial timestep_end'
[]
[p010]
type = PointValue
variable = pp
point = '10 0 0'
execute_on = 'initial timestep_end'
[]
[p020]
type = PointValue
variable = pp
point = '20 0 0'
execute_on = 'initial timestep_end'
[]
[p030]
type = PointValue
variable = pp
point = '30 0 0'
execute_on = 'initial timestep_end'
[]
[p040]
type = PointValue
variable = pp
point = '40 0 0'
execute_on = 'initial timestep_end'
[]
[p050]
type = PointValue
variable = pp
point = '50 0 0'
execute_on = 'initial timestep_end'
[]
[p060]
type = PointValue
variable = pp
point = '60 0 0'
execute_on = 'initial timestep_end'
[]
[p070]
type = PointValue
variable = pp
point = '70 0 0'
execute_on = 'initial timestep_end'
[]
[p080]
type = PointValue
variable = pp
point = '80 0 0'
execute_on = 'initial timestep_end'
[]
[p090]
type = PointValue
variable = pp
point = '90 0 0'
execute_on = 'initial timestep_end'
[]
[p100]
type = PointValue
variable = pp
point = '100 0 0'
execute_on = 'initial timestep_end'
[]
[]
[Outputs]
file_base = pressure_pulse_1d
print_linear_residuals = false
csv = true
[]
(modules/porous_flow/test/tests/fluidstate/brineco2_2.i)
# Injection of supercritical CO2 into a single brine saturated cell. The CO2 initially fully
# dissolves into the brine, increasing its density slightly. After a few time steps,
# the brine is saturated with CO2, and subsequently a supercritical gas phase of CO2 saturated
# with a small amount of H2O is formed. Salt is included as a nonlinear variable.
[Mesh]
type = GeneratedMesh
dim = 2
[]
[GlobalParams]
PorousFlowDictator = dictator
temperature = 30
[]
[Variables]
[pgas]
initial_condition = 20e6
[]
[z]
[]
[xnacl]
initial_condition = 0.1
[]
[]
[DiracKernels]
[source]
type = PorousFlowSquarePulsePointSource
variable = z
point = '0.5 0.5 0'
mass_flux = 2
[]
[]
[BCs]
[left]
type = DirichletBC
value = 20e6
variable = pgas
boundary = left
[]
[right]
type = DirichletBC
value = 20e6
variable = pgas
boundary = right
[]
[]
[AuxVariables]
[pressure_gas]
order = CONSTANT
family = MONOMIAL
[]
[pressure_water]
order = CONSTANT
family = MONOMIAL
[]
[saturation_gas]
order = CONSTANT
family = MONOMIAL
[]
[saturation_water]
order = CONSTANT
family = MONOMIAL
[]
[density_water]
order = CONSTANT
family = MONOMIAL
[]
[density_gas]
order = CONSTANT
family = MONOMIAL
[]
[viscosity_water]
order = CONSTANT
family = MONOMIAL
[]
[viscosity_gas]
order = CONSTANT
family = MONOMIAL
[]
[x0_water]
order = CONSTANT
family = MONOMIAL
[]
[x0_gas]
order = CONSTANT
family = MONOMIAL
[]
[x1_water]
order = CONSTANT
family = MONOMIAL
[]
[x1_gas]
order = CONSTANT
family = MONOMIAL
[]
[]
[AuxKernels]
[pressure_water]
type = PorousFlowPropertyAux
variable = pressure_water
property = pressure
phase = 0
execute_on = 'initial timestep_end'
[]
[pressure_gas]
type = PorousFlowPropertyAux
variable = pressure_gas
property = pressure
phase = 1
execute_on = 'initial timestep_end'
[]
[saturation_water]
type = PorousFlowPropertyAux
variable = saturation_water
property = saturation
phase = 0
execute_on = 'initial timestep_end'
[]
[saturation_gas]
type = PorousFlowPropertyAux
variable = saturation_gas
property = saturation
phase = 1
execute_on = 'initial timestep_end'
[]
[density_water]
type = PorousFlowPropertyAux
variable = density_water
property = density
phase = 0
execute_on = 'initial timestep_end'
[]
[density_gas]
type = PorousFlowPropertyAux
variable = density_gas
property = density
phase = 1
execute_on = 'initial timestep_end'
[]
[viscosity_water]
type = PorousFlowPropertyAux
variable = viscosity_water
property = viscosity
phase = 0
execute_on = 'initial timestep_end'
[]
[viscosity_gas]
type = PorousFlowPropertyAux
variable = viscosity_gas
property = viscosity
phase = 1
execute_on = 'initial timestep_end'
[]
[x1_water]
type = PorousFlowPropertyAux
variable = x1_water
property = mass_fraction
phase = 0
fluid_component = 1
execute_on = 'initial timestep_end'
[]
[x1_gas]
type = PorousFlowPropertyAux
variable = x1_gas
property = mass_fraction
phase = 1
fluid_component = 1
execute_on = 'initial timestep_end'
[]
[x0_water]
type = PorousFlowPropertyAux
variable = x0_water
property = mass_fraction
phase = 0
fluid_component = 0
execute_on = 'initial timestep_end'
[]
[x0_gas]
type = PorousFlowPropertyAux
variable = x0_gas
property = mass_fraction
phase = 1
fluid_component = 0
execute_on = 'initial timestep_end'
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
variable = pgas
fluid_component = 0
[]
[mass1]
type = PorousFlowMassTimeDerivative
variable = z
fluid_component = 1
[]
[mass2]
type = PorousFlowMassTimeDerivative
variable = xnacl
fluid_component = 2
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pgas z xnacl'
number_fluid_phases = 2
number_fluid_components = 3
[]
[pc]
type = PorousFlowCapillaryPressureConst
pc = 0
[]
[fs]
type = PorousFlowBrineCO2
brine_fp = brine
co2_fp = co2
capillary_pressure = pc
[]
[]
[FluidProperties]
[co2]
type = CO2FluidProperties
[]
[brine]
type = BrineFluidProperties
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[brineco2]
type = PorousFlowFluidState
gas_porepressure = pgas
z = z
temperature_unit = Celsius
xnacl = xnacl
capillary_pressure = pc
fluid_state = fs
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-12 0 0 0 1e-12 0 0 0 1e-12'
[]
[relperm0]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[relperm1]
type = PorousFlowRelativePermeabilityCorey
n = 3
phase = 1
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[]
[Executioner]
type = Transient
solve_type = NEWTON
dt = 1
end_time = 10
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Postprocessors]
[density_water]
type = ElementIntegralVariablePostprocessor
variable = density_water
execute_on = 'initial timestep_end'
[]
[density_gas]
type = ElementIntegralVariablePostprocessor
variable = density_gas
execute_on = 'initial timestep_end'
[]
[viscosity_water]
type = ElementIntegralVariablePostprocessor
variable = viscosity_water
execute_on = 'initial timestep_end'
[]
[viscosity_gas]
type = ElementIntegralVariablePostprocessor
variable = viscosity_gas
execute_on = 'initial timestep_end'
[]
[x1_water]
type = ElementIntegralVariablePostprocessor
variable = x1_water
execute_on = 'initial timestep_end'
[]
[x0_water]
type = ElementIntegralVariablePostprocessor
variable = x0_water
execute_on = 'initial timestep_end'
[]
[x1_gas]
type = ElementIntegralVariablePostprocessor
variable = x1_gas
execute_on = 'initial timestep_end'
[]
[x0_gas]
type = ElementIntegralVariablePostprocessor
variable = x0_gas
execute_on = 'initial timestep_end'
[]
[sg]
type = ElementIntegralVariablePostprocessor
variable = saturation_gas
execute_on = 'initial timestep_end'
[]
[sw]
type = ElementIntegralVariablePostprocessor
variable = saturation_water
execute_on = 'initial timestep_end'
[]
[pwater]
type = ElementIntegralVariablePostprocessor
variable = pressure_water
execute_on = 'initial timestep_end'
[]
[pgas]
type = ElementIntegralVariablePostprocessor
variable = pressure_gas
execute_on = 'initial timestep_end'
[]
[xnacl]
type = ElementIntegralVariablePostprocessor
variable = xnacl
execute_on = 'initial timestep_end'
[]
[x0mass]
type = PorousFlowFluidMass
fluid_component = 0
phase = '0 1'
execute_on = 'initial timestep_end'
[]
[x1mass]
type = PorousFlowFluidMass
fluid_component = 1
phase = '0 1'
execute_on = 'initial timestep_end'
[]
[x2mass]
type = PorousFlowFluidMass
fluid_component = 2
phase = '0 1'
execute_on = 'initial timestep_end'
[]
[]
[Outputs]
csv = true
file_base = brineco2_2
execute_on = 'initial timestep_end'
perf_graph = true
[]
(modules/porous_flow/test/tests/dirackernels/bh02.i)
# fully-saturated
# production
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 1
xmin = -1
xmax = 1
ymin = -1
ymax = 1
zmin = -1
zmax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
initial_condition = 1E7
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
[]
[]
[UserObjects]
[borehole_total_outflow_mass]
type = PorousFlowSumQuantity
[]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1e-7
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e9
viscosity = 1e-3
density0 = 1000
thermal_expansion = 0
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-12 0 0 0 1E-12 0 0 0 1E-12'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[]
[DiracKernels]
[bh]
type = PorousFlowPeacemanBorehole
# Because the Variable for this Sink is pp, and pp is associated
# with the fluid-mass conservation equation, this sink is extracting
# fluid mass (and not heat energy or something else)
variable = pp
# The following specfies that the total fluid mass coming out of
# the porespace via this sink in this timestep should be recorded
# in the pls_total_outflow_mass UserObject
SumQuantityUO = borehole_total_outflow_mass
# The following file defines the polyline geometry
# which is just two points in this particular example
point_file = bh02.bh
# First, we want Peacemans f to be a function of porepressure (and not
# temperature or something else). So bottom_p_or_t is actually porepressure
function_of = pressure
fluid_phase = 0
# The bottomhole pressure
bottom_p_or_t = 0
# In this example there is no increase of the wellbore pressure
# due to gravity:
unit_weight = '0 0 0'
# PeacemanBoreholes should almost always have use_mobility = true
use_mobility = true
# This is a production wellbore (a sink of fluid that removes fluid from porespace)
character = 1
[]
[]
[Postprocessors]
[bh_report]
type = PorousFlowPlotQuantity
uo = borehole_total_outflow_mass
[]
[fluid_mass0]
type = PorousFlowFluidMass
execute_on = timestep_begin
[]
[fluid_mass1]
type = PorousFlowFluidMass
execute_on = timestep_end
[]
[zmass_error]
type = FunctionValuePostprocessor
function = mass_bal_fcn
execute_on = timestep_end
indirect_dependencies = 'fluid_mass1 fluid_mass0 bh_report'
[]
[p0]
type = PointValue
variable = pp
point = '0 0 0'
execute_on = timestep_end
[]
[]
[Functions]
[mass_bal_fcn]
type = ParsedFunction
expression = abs((a-c+d)/2/(a+c))
symbol_names = 'a c d'
symbol_values = 'fluid_mass1 fluid_mass0 bh_report'
[]
[]
[Preconditioning]
[usual]
type = SMP
full = true
petsc_options = '-snes_converged_reason'
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -ksp_max_it'
petsc_options_value = 'bcgs bjacobi 1E-10 1E-10 10000 30'
[]
[]
[Executioner]
type = Transient
end_time = 0.5
dt = 1E-2
solve_type = NEWTON
[]
[Outputs]
file_base = bh02
exodus = false
csv = true
execute_on = timestep_end
[]
(modules/porous_flow/test/tests/poroperm/PermTensorFromVar01.i)
# Testing permeability calculated from scalar and tensor
# Trivial test, checking calculated permeability is correct
# k = k_anisotropy * perm
[Mesh]
type = GeneratedMesh
dim = 1
nx = 3
xmin = 0
xmax = 3
[]
[GlobalParams]
block = 0
PorousFlowDictator = dictator
[]
[Variables]
[pp]
[InitialCondition]
type = ConstantIC
value = 0
[]
[]
[]
[Kernels]
[flux]
type = PorousFlowAdvectiveFlux
gravity = '0 0 0'
variable = pp
[]
[]
[BCs]
[ptop]
type = DirichletBC
variable = pp
boundary = right
value = 0
[]
[pbase]
type = DirichletBC
variable = pp
boundary = left
value = 1
[]
[]
[AuxVariables]
[perm_var]
order = CONSTANT
family = MONOMIAL
[]
[perm_x]
order = CONSTANT
family = MONOMIAL
[]
[perm_y]
order = CONSTANT
family = MONOMIAL
[]
[perm_z]
order = CONSTANT
family = MONOMIAL
[]
[]
[AuxKernels]
[perm_var]
type = ConstantAux
value = 2
variable = perm_var
[]
[perm_x]
type = PorousFlowPropertyAux
property = permeability
variable = perm_x
row = 0
column = 0
[]
[perm_y]
type = PorousFlowPropertyAux
property = permeability
variable = perm_y
row = 1
column = 1
[]
[perm_z]
type = PorousFlowPropertyAux
property = permeability
variable = perm_z
row = 2
column = 2
[]
[]
[Postprocessors]
[perm_x_left]
type = PointValue
variable = perm_x
point = '0.5 0 0'
[]
[perm_y_left]
type = PointValue
variable = perm_y
point = '0.5 0 0'
[]
[perm_z_left]
type = PointValue
variable = perm_z
point = '0.5 0 0'
[]
[perm_x_right]
type = PointValue
variable = perm_x
point = '2.5 0 0'
[]
[perm_y_right]
type = PointValue
variable = perm_y
point = '2.5 0 0'
[]
[perm_z_right]
type = PointValue
variable = perm_z
point = '2.5 0 0'
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
# unimportant in this fully-saturated test
m = 0.8
alpha = 1e-4
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
[]
[]
[Materials]
[permeability]
type = PorousFlowPermeabilityTensorFromVar
k_anisotropy = '1 0 0 0 2 0 0 0 0.1'
perm = perm_var
[]
[temperature]
type = PorousFlowTemperature
[]
[massfrac]
type = PorousFlowMassFraction
[]
[eff_fluid_pressure]
type = PorousFlowEffectiveFluidPressure
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosity
porosity_zero = 0.1
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 0 # unimportant in this fully-saturated situation
phase = 0
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
[]
[]
[Executioner]
solve_type = Newton
type = Steady
l_tol = 1E-5
nl_abs_tol = 1E-3
nl_rel_tol = 1E-8
l_max_its = 200
nl_max_its = 400
petsc_options_iname = '-pc_type -pc_asm_overlap -sub_pc_type -ksp_type -ksp_gmres_restart'
petsc_options_value = ' asm 2 lu gmres 200'
[]
[Outputs]
csv = true
execute_on = 'timestep_end'
[]
(modules/porous_flow/examples/coal_mining/coarse_with_fluid.i)
# Strata deformation and fluid flow aaround a coal mine - 3D model
#
# A "half model" is used. The mine is 400m deep and
# just the roof is studied (-400<=z<=0). The mining panel
# sits between 0<=x<=150, and 0<=y<=1000, so this simulates
# a coal panel that is 300m wide and 1000m long. The outer boundaries
# are 1km from the excavation boundaries.
#
# The excavation takes 0.5 years.
#
# The boundary conditions for this simulation are:
# - disp_x = 0 at x=0 and x=1150
# - disp_y = 0 at y=-1000 and y=1000
# - disp_z = 0 at z=-400, but there is a time-dependent
# Young modulus that simulates excavation
# - wc_x = 0 at y=-1000 and y=1000
# - wc_y = 0 at x=0 and x=1150
# - no flow at x=0, z=-400 and z=0
# - fixed porepressure at y=-1000, y=1000 and x=1150
# That is, rollers on the sides, free at top,
# and prescribed at bottom in the unexcavated portion.
#
# A single-phase unsaturated fluid is used.
#
# The small strain formulation is used.
#
# All stresses are measured in MPa, and time units are measured in years.
#
# The initial porepressure is hydrostatic with P=0 at z=0, so
# Porepressure ~ - 0.01*z MPa, where the fluid has density 1E3 kg/m^3 and
# gravity = = 10 m.s^-2 = 1E-5 MPa m^2/kg.
# To be more accurate, i use
# Porepressure = -bulk * log(1 + g*rho0*z/bulk)
# where bulk=2E3 MPa and rho0=1Ee kg/m^3.
# The initial stress is consistent with the weight force from undrained
# density 2500 kg/m^3, and fluid porepressure, and a Biot coefficient of 0.7, ie,
# stress_zz^effective = 0.025*z + 0.7 * initial_porepressure
# The maximum and minimum principal horizontal effective stresses are
# assumed to be equal to 0.8*stress_zz.
#
# Material properties:
# Young's modulus = 8 GPa
# Poisson's ratio = 0.25
# Cosserat layer thickness = 1 m
# Cosserat-joint normal stiffness = large
# Cosserat-joint shear stiffness = 1 GPa
# MC cohesion = 2 MPa
# MC friction angle = 35 deg
# MC dilation angle = 8 deg
# MC tensile strength = 1 MPa
# MC compressive strength = 100 MPa
# WeakPlane cohesion = 0.1 MPa
# WeakPlane friction angle = 30 deg
# WeakPlane dilation angle = 10 deg
# WeakPlane tensile strength = 0.1 MPa
# WeakPlane compressive strength = 100 MPa softening to 1 MPa at strain = 1
# Fluid density at zero porepressure = 1E3 kg/m^3
# Fluid bulk modulus = 2E3 MPa
# Fluid viscosity = 1.1E-3 Pa.s = 1.1E-9 MPa.s = 3.5E-17 MPa.year
#
[GlobalParams]
perform_finite_strain_rotations = false
displacements = 'disp_x disp_y disp_z'
Cosserat_rotations = 'wc_x wc_y wc_z'
PorousFlowDictator = dictator
biot_coefficient = 0.7
[]
[Mesh]
[file]
type = FileMeshGenerator
file = mesh/coarse.e
[]
[xmin]
type = SideSetsAroundSubdomainGenerator
block = '2 3 4 5 6 7 8 9 10 11 12 13 14 15 16'
new_boundary = xmin
normal = '-1 0 0'
input = file
[]
[xmax]
type = SideSetsAroundSubdomainGenerator
block = '2 3 4 5 6 7 8 9 10 11 12 13 14 15 16'
new_boundary = xmax
normal = '1 0 0'
input = xmin
[]
[ymin]
type = SideSetsAroundSubdomainGenerator
block = '2 3 4 5 6 7 8 9 10 11 12 13 14 15 16'
new_boundary = ymin
normal = '0 -1 0'
input = xmax
[]
[ymax]
type = SideSetsAroundSubdomainGenerator
block = '2 3 4 5 6 7 8 9 10 11 12 13 14 15 16'
new_boundary = ymax
normal = '0 1 0'
input = ymin
[]
[zmax]
type = SideSetsAroundSubdomainGenerator
block = 16
new_boundary = zmax
normal = '0 0 1'
input = ymax
[]
[zmin]
type = SideSetsAroundSubdomainGenerator
block = 2
new_boundary = zmin
normal = '0 0 -1'
input = zmax
[]
[excav]
type = SubdomainBoundingBoxGenerator
input = zmin
block_id = 1
bottom_left = '0 0 -400'
top_right = '150 1000 -397'
[]
[roof]
type = SideSetsBetweenSubdomainsGenerator
primary_block = 3
paired_block = 1
input = excav
new_boundary = roof
[]
[]
[Variables]
[disp_x]
[]
[disp_y]
[]
[disp_z]
[]
[wc_x]
[]
[wc_y]
[]
[porepressure]
scaling = 1E-5
[]
[]
[ICs]
[porepressure]
type = FunctionIC
variable = porepressure
function = ini_pp
[]
[]
[Kernels]
[cx_elastic]
type = CosseratStressDivergenceTensors
use_displaced_mesh = false
variable = disp_x
component = 0
[]
[cy_elastic]
type = CosseratStressDivergenceTensors
use_displaced_mesh = false
variable = disp_y
component = 1
[]
[cz_elastic]
type = CosseratStressDivergenceTensors
use_displaced_mesh = false
variable = disp_z
component = 2
[]
[x_couple]
type = StressDivergenceTensors
use_displaced_mesh = false
variable = wc_x
displacements = 'wc_x wc_y wc_z'
component = 0
base_name = couple
[]
[y_couple]
type = StressDivergenceTensors
use_displaced_mesh = false
variable = wc_y
displacements = 'wc_x wc_y wc_z'
component = 1
base_name = couple
[]
[x_moment]
type = MomentBalancing
use_displaced_mesh = false
variable = wc_x
component = 0
[]
[y_moment]
type = MomentBalancing
use_displaced_mesh = false
variable = wc_y
component = 1
[]
[gravity]
type = Gravity
use_displaced_mesh = false
variable = disp_z
value = -10E-6 # remember this is in MPa
[]
[poro_x]
type = PorousFlowEffectiveStressCoupling
use_displaced_mesh = false
variable = disp_x
component = 0
[]
[poro_y]
type = PorousFlowEffectiveStressCoupling
use_displaced_mesh = false
variable = disp_y
component = 1
[]
[poro_z]
type = PorousFlowEffectiveStressCoupling
use_displaced_mesh = false
component = 2
variable = disp_z
[]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = porepressure
[]
[flux]
type = PorousFlowAdvectiveFlux
use_displaced_mesh = false
variable = porepressure
gravity = '0 0 -10E-6'
fluid_component = 0
[]
[poro_vol_exp]
type = PorousFlowMassVolumetricExpansion
block = '2 3 4 5 6 7 8 9 10 11 12 13 14 15 16'
variable = porepressure
fluid_component = 0
[]
[]
[AuxVariables]
[saturation]
order = CONSTANT
family = MONOMIAL
[]
[darcy_x]
order = CONSTANT
family = MONOMIAL
[]
[darcy_y]
order = CONSTANT
family = MONOMIAL
[]
[darcy_z]
order = CONSTANT
family = MONOMIAL
[]
[porosity]
order = CONSTANT
family = MONOMIAL
[]
[wc_z]
[]
[stress_xx]
order = CONSTANT
family = MONOMIAL
[]
[stress_xy]
order = CONSTANT
family = MONOMIAL
[]
[stress_xz]
order = CONSTANT
family = MONOMIAL
[]
[stress_yx]
order = CONSTANT
family = MONOMIAL
[]
[stress_yy]
order = CONSTANT
family = MONOMIAL
[]
[stress_yz]
order = CONSTANT
family = MONOMIAL
[]
[stress_zx]
order = CONSTANT
family = MONOMIAL
[]
[stress_zy]
order = CONSTANT
family = MONOMIAL
[]
[stress_zz]
order = CONSTANT
family = MONOMIAL
[]
[total_strain_xx]
order = CONSTANT
family = MONOMIAL
[]
[total_strain_xy]
order = CONSTANT
family = MONOMIAL
[]
[total_strain_xz]
order = CONSTANT
family = MONOMIAL
[]
[total_strain_yx]
order = CONSTANT
family = MONOMIAL
[]
[total_strain_yy]
order = CONSTANT
family = MONOMIAL
[]
[total_strain_yz]
order = CONSTANT
family = MONOMIAL
[]
[total_strain_zx]
order = CONSTANT
family = MONOMIAL
[]
[total_strain_zy]
order = CONSTANT
family = MONOMIAL
[]
[total_strain_zz]
order = CONSTANT
family = MONOMIAL
[]
[perm_xx]
order = CONSTANT
family = MONOMIAL
[]
[perm_yy]
order = CONSTANT
family = MONOMIAL
[]
[perm_zz]
order = CONSTANT
family = MONOMIAL
[]
[mc_shear]
order = CONSTANT
family = MONOMIAL
[]
[mc_tensile]
order = CONSTANT
family = MONOMIAL
[]
[wp_shear]
order = CONSTANT
family = MONOMIAL
[]
[wp_tensile]
order = CONSTANT
family = MONOMIAL
[]
[wp_shear_f]
order = CONSTANT
family = MONOMIAL
[]
[wp_tensile_f]
order = CONSTANT
family = MONOMIAL
[]
[mc_shear_f]
order = CONSTANT
family = MONOMIAL
[]
[mc_tensile_f]
order = CONSTANT
family = MONOMIAL
[]
[]
[AuxKernels]
[saturation_water]
type = PorousFlowPropertyAux
variable = saturation
property = saturation
phase = 0
execute_on = timestep_end
[]
[darcy_x]
type = PorousFlowDarcyVelocityComponent
variable = darcy_x
gravity = '0 0 -10E-6'
component = x
[]
[darcy_y]
type = PorousFlowDarcyVelocityComponent
variable = darcy_y
gravity = '0 0 -10E-6'
component = y
[]
[darcy_z]
type = PorousFlowDarcyVelocityComponent
variable = darcy_z
gravity = '0 0 -10E-6'
component = z
[]
[porosity]
type = PorousFlowPropertyAux
property = porosity
variable = porosity
execute_on = timestep_end
[]
[stress_xx]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xx
index_i = 0
index_j = 0
execute_on = timestep_end
[]
[stress_xy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xy
index_i = 0
index_j = 1
execute_on = timestep_end
[]
[stress_xz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xz
index_i = 0
index_j = 2
execute_on = timestep_end
[]
[stress_yx]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yx
index_i = 1
index_j = 0
execute_on = timestep_end
[]
[stress_yy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yy
index_i = 1
index_j = 1
execute_on = timestep_end
[]
[stress_yz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yz
index_i = 1
index_j = 2
execute_on = timestep_end
[]
[stress_zx]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_zx
index_i = 2
index_j = 0
execute_on = timestep_end
[]
[stress_zy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_zy
index_i = 2
index_j = 1
execute_on = timestep_end
[]
[stress_zz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_zz
index_i = 2
index_j = 2
execute_on = timestep_end
[]
[total_strain_xx]
type = RankTwoAux
rank_two_tensor = total_strain
variable = total_strain_xx
index_i = 0
index_j = 0
execute_on = timestep_end
[]
[total_strain_xy]
type = RankTwoAux
rank_two_tensor = total_strain
variable = total_strain_xy
index_i = 0
index_j = 1
execute_on = timestep_end
[]
[total_strain_xz]
type = RankTwoAux
rank_two_tensor = total_strain
variable = total_strain_xz
index_i = 0
index_j = 2
execute_on = timestep_end
[]
[total_strain_yx]
type = RankTwoAux
rank_two_tensor = total_strain
variable = total_strain_yx
index_i = 1
index_j = 0
execute_on = timestep_end
[]
[total_strain_yy]
type = RankTwoAux
rank_two_tensor = total_strain
variable = total_strain_yy
index_i = 1
index_j = 1
execute_on = timestep_end
[]
[total_strain_yz]
type = RankTwoAux
rank_two_tensor = total_strain
variable = total_strain_yz
index_i = 1
index_j = 2
execute_on = timestep_end
[]
[total_strain_zx]
type = RankTwoAux
rank_two_tensor = total_strain
variable = total_strain_zx
index_i = 2
index_j = 0
execute_on = timestep_end
[]
[total_strain_zy]
type = RankTwoAux
rank_two_tensor = total_strain
variable = total_strain_zy
index_i = 2
index_j = 1
execute_on = timestep_end
[]
[total_strain_zz]
type = RankTwoAux
rank_two_tensor = total_strain
variable = total_strain_zz
index_i = 2
index_j = 2
execute_on = timestep_end
[]
[perm_xx]
type = PorousFlowPropertyAux
property = permeability
variable = perm_xx
row = 0
column = 0
execute_on = timestep_end
[]
[perm_yy]
type = PorousFlowPropertyAux
property = permeability
variable = perm_yy
row = 1
column = 1
execute_on = timestep_end
[]
[perm_zz]
type = PorousFlowPropertyAux
property = permeability
variable = perm_zz
row = 2
column = 2
execute_on = timestep_end
[]
[mc_shear]
type = MaterialStdVectorAux
index = 0
property = mc_plastic_internal_parameter
variable = mc_shear
execute_on = timestep_end
[]
[mc_tensile]
type = MaterialStdVectorAux
index = 1
property = mc_plastic_internal_parameter
variable = mc_tensile
execute_on = timestep_end
[]
[wp_shear]
type = MaterialStdVectorAux
index = 0
property = wp_plastic_internal_parameter
variable = wp_shear
execute_on = timestep_end
[]
[wp_tensile]
type = MaterialStdVectorAux
index = 1
property = wp_plastic_internal_parameter
variable = wp_tensile
execute_on = timestep_end
[]
[mc_shear_f]
type = MaterialStdVectorAux
index = 6
property = mc_plastic_yield_function
variable = mc_shear_f
execute_on = timestep_end
[]
[mc_tensile_f]
type = MaterialStdVectorAux
index = 0
property = mc_plastic_yield_function
variable = mc_tensile_f
execute_on = timestep_end
[]
[wp_shear_f]
type = MaterialStdVectorAux
index = 0
property = wp_plastic_yield_function
variable = wp_shear_f
execute_on = timestep_end
[]
[wp_tensile_f]
type = MaterialStdVectorAux
index = 1
property = wp_plastic_yield_function
variable = wp_tensile_f
execute_on = timestep_end
[]
[]
[BCs]
[no_x]
type = DirichletBC
variable = disp_x
boundary = 'xmin xmax'
value = 0.0
[]
[no_y]
type = DirichletBC
variable = disp_y
boundary = 'ymin ymax'
value = 0.0
[]
[no_z]
type = DirichletBC
variable = disp_z
boundary = zmin
value = 0.0
[]
[no_wc_x]
type = DirichletBC
variable = wc_x
boundary = 'ymin ymax'
value = 0.0
[]
[no_wc_y]
type = DirichletBC
variable = wc_y
boundary = 'xmin xmax'
value = 0.0
[]
[fix_porepressure]
type = FunctionDirichletBC
variable = porepressure
boundary = 'ymin ymax xmax'
function = ini_pp
[]
[roof_porepressure]
type = PorousFlowPiecewiseLinearSink
variable = porepressure
pt_vals = '-1E3 1E3'
multipliers = '-1 1'
fluid_phase = 0
flux_function = roof_conductance
boundary = roof
[]
[roof_bcs]
type = StickyBC
variable = disp_z
min_value = -3.0
boundary = roof
[]
[]
[Functions]
[ini_pp]
type = ParsedFunction
symbol_names = 'bulk p0 g rho0'
symbol_values = '2E3 0.0 1E-5 1E3'
expression = '-bulk*log(exp(-p0/bulk)+g*rho0*z/bulk)'
[]
[ini_xx]
type = ParsedFunction
symbol_names = 'bulk p0 g rho0 biot'
symbol_values = '2E3 0.0 1E-5 1E3 0.7'
expression = '0.8*(2500*10E-6*z+biot*(-bulk*log(exp(-p0/bulk)+g*rho0*z/bulk)))'
[]
[ini_zz]
type = ParsedFunction
symbol_names = 'bulk p0 g rho0 biot'
symbol_values = '2E3 0.0 1E-5 1E3 0.7'
expression = '2500*10E-6*z+biot*(-bulk*log(exp(-p0/bulk)+g*rho0*z/bulk))'
[]
[excav_sideways]
type = ParsedFunction
symbol_names = 'end_t ymin ymax minval maxval slope'
symbol_values = '0.5 0 1000.0 1E-9 1 60'
# excavation face at ymin+(ymax-ymin)*min(t/end_t,1)
# slope is the distance over which the modulus reduces from maxval to minval
expression = 'if(y<ymin+(ymax-ymin)*min(t/end_t,1),minval,if(y<ymin+(ymax-ymin)*min(t/end_t,1)+slope,minval+(maxval-minval)*(y-(ymin+(ymax-ymin)*min(t/end_t,1)))/slope,maxval))'
[]
[density_sideways]
type = ParsedFunction
symbol_names = 'end_t ymin ymax minval maxval'
symbol_values = '0.5 0 1000.0 0 2500'
expression = 'if(y<ymin+(ymax-ymin)*min(t/end_t,1),minval,maxval)'
[]
[roof_conductance]
type = ParsedFunction
symbol_names = 'end_t ymin ymax maxval minval'
symbol_values = '0.5 0 1000.0 1E7 0'
expression = 'if(y<ymin+(ymax-ymin)*min(t/end_t,1),maxval,minval)'
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'porepressure disp_x disp_y disp_z'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1 # MPa^-1
[]
[mc_coh_strong_harden]
type = TensorMechanicsHardeningExponential
value_0 = 1.99 # MPa
value_residual = 2.01 # MPa
rate = 1.0
[]
[mc_fric]
type = TensorMechanicsHardeningConstant
value = 0.61 # 35deg
[]
[mc_dil]
type = TensorMechanicsHardeningConstant
value = 0.15 # 8deg
[]
[mc_tensile_str_strong_harden]
type = TensorMechanicsHardeningExponential
value_0 = 1.0 # MPa
value_residual = 1.0 # MPa
rate = 1.0
[]
[mc_compressive_str]
type = TensorMechanicsHardeningCubic
value_0 = 100 # Large!
value_residual = 100
internal_limit = 0.1
[]
[wp_coh_harden]
type = TensorMechanicsHardeningCubic
value_0 = 0.05
value_residual = 0.05
internal_limit = 10
[]
[wp_tan_fric]
type = TensorMechanicsHardeningConstant
value = 0.26 # 15deg
[]
[wp_tan_dil]
type = TensorMechanicsHardeningConstant
value = 0.18 # 10deg
[]
[wp_tensile_str_harden]
type = TensorMechanicsHardeningCubic
value_0 = 0.05
value_residual = 0.05
internal_limit = 10
[]
[wp_compressive_str_soften]
type = TensorMechanicsHardeningCubic
value_0 = 100
value_residual = 1
internal_limit = 1.0
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2E3
density0 = 1000
thermal_expansion = 0
viscosity = 3.5E-17
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[eff_fluid_pressure]
type = PorousFlowEffectiveFluidPressure
[]
[vol_strain]
type = PorousFlowVolumetricStrain
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = porepressure
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity_bulk]
type = PorousFlowPorosity
fluid = true
mechanical = true
block = '2 3 4 5 6 7 8 9 10 11 12 13 14 15 16'
ensure_positive = true
porosity_zero = 0.02
solid_bulk = 5.3333E3
[]
[porosity_excav]
type = PorousFlowPorosityConst
block = 1
porosity = 1.0
[]
[permeability_bulk]
type = PorousFlowPermeabilityKozenyCarman
block = '2 3 4 5 6 7 8 9 10 11 12 13 14 15 16'
poroperm_function = kozeny_carman_phi0
k0 = 1E-15
phi0 = 0.02
n = 2
m = 2
[]
[permeability_excav]
type = PorousFlowPermeabilityConst
block = 1
permeability = '0 0 0 0 0 0 0 0 0'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 4
s_res = 0.4
sum_s_res = 0.4
phase = 0
[]
[elasticity_tensor_0]
type = ComputeLayeredCosseratElasticityTensor
block = '2 3 4 5 6 7 8 9 10 11 12 13 14 15 16'
young = 8E3 # MPa
poisson = 0.25
layer_thickness = 1.0
joint_normal_stiffness = 1E9 # huge
joint_shear_stiffness = 1E3 # MPa
[]
[elasticity_tensor_1]
type = ComputeLayeredCosseratElasticityTensor
block = 1
young = 8E3 # MPa
poisson = 0.25
layer_thickness = 1.0
joint_normal_stiffness = 1E9 # huge
joint_shear_stiffness = 1E3 # MPa
elasticity_tensor_prefactor = excav_sideways
[]
[strain]
type = ComputeCosseratIncrementalSmallStrain
eigenstrain_names = ini_stress
[]
[ini_stress]
type = ComputeEigenstrainFromInitialStress
eigenstrain_name = ini_stress
initial_stress = 'ini_xx 0 0 0 ini_xx 0 0 0 ini_zz'
[]
[stress_0]
type = ComputeMultipleInelasticCosseratStress
block = '2 3 4 5 6 7 8 9 10 11 12 13 14 15 16'
inelastic_models = 'mc wp'
cycle_models = true
relative_tolerance = 2.0
absolute_tolerance = 1E6
max_iterations = 1
tangent_operator = nonlinear
perform_finite_strain_rotations = false
[]
[stress_1]
type = ComputeMultipleInelasticCosseratStress
block = 1
inelastic_models = ''
relative_tolerance = 2.0
absolute_tolerance = 1E6
max_iterations = 1
tangent_operator = nonlinear
perform_finite_strain_rotations = false
[]
[mc]
type = CappedMohrCoulombCosseratStressUpdate
warn_about_precision_loss = false
host_youngs_modulus = 8E3
host_poissons_ratio = 0.25
base_name = mc
tensile_strength = mc_tensile_str_strong_harden
compressive_strength = mc_compressive_str
cohesion = mc_coh_strong_harden
friction_angle = mc_fric
dilation_angle = mc_dil
max_NR_iterations = 100000
smoothing_tol = 0.1 # MPa # Must be linked to cohesion
yield_function_tol = 1E-9 # MPa. this is essentially the lowest possible without lots of precision loss
perfect_guess = true
min_step_size = 1.0
[]
[wp]
type = CappedWeakPlaneCosseratStressUpdate
warn_about_precision_loss = false
base_name = wp
cohesion = wp_coh_harden
tan_friction_angle = wp_tan_fric
tan_dilation_angle = wp_tan_dil
tensile_strength = wp_tensile_str_harden
compressive_strength = wp_compressive_str_soften
max_NR_iterations = 10000
tip_smoother = 0.05
smoothing_tol = 0.05 # MPa # Note, this must be tied to cohesion, otherwise get no possible return at cone apex
yield_function_tol = 1E-11 # MPa. this is essentially the lowest possible without lots of precision loss
perfect_guess = true
min_step_size = 1.0E-3
[]
[undrained_density_0]
type = GenericConstantMaterial
block = '2 3 4 5 6 7 8 9 10 11 12 13 14 15 16'
prop_names = density
prop_values = 2500
[]
[undrained_density_1]
type = GenericFunctionMaterial
block = 1
prop_names = density
prop_values = density_sideways
[]
[]
[Preconditioning]
[SMP]
type = SMP
full = true
[]
[]
[Postprocessors]
[min_roof_disp]
type = NodalExtremeValue
boundary = roof
value_type = min
variable = disp_z
[]
[min_roof_pp]
type = NodalExtremeValue
boundary = roof
value_type = min
variable = porepressure
[]
[min_surface_disp]
type = NodalExtremeValue
boundary = zmax
value_type = min
variable = disp_z
[]
[min_surface_pp]
type = NodalExtremeValue
boundary = zmax
value_type = min
variable = porepressure
[]
[max_perm_zz]
type = ElementExtremeValue
block = '2 3 4 5 6 7 8 9 10 11 12 13 14 15 16'
variable = perm_zz
[]
[]
[Executioner]
type = Transient
solve_type = 'NEWTON'
petsc_options = '-snes_converged_reason'
# best overall
# petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
# petsc_options_value = ' lu mumps'
# best if you do not have mumps:
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = ' lu superlu_dist'
# best if you do not have mumps or superlu_dist:
#petsc_options_iname = '-pc_type -pc_asm_overlap -sub_pc_type -ksp_type -ksp_gmres_restart'
#petsc_options_value = ' asm 2 lu gmres 200'
# very basic:
#petsc_options_iname = '-pc_type -ksp_type -ksp_gmres_restart'
#petsc_options_value = ' bjacobi gmres 200'
line_search = bt
nl_abs_tol = 1e-3
nl_rel_tol = 1e-5
l_max_its = 200
nl_max_its = 30
start_time = 0.0
dt = 0.014706
end_time = 0.014706 #0.5
[]
[Outputs]
time_step_interval = 1
print_linear_residuals = true
exodus = true
csv = true
console = true
[]
(modules/porous_flow/test/tests/jacobian/hcs01.i)
# apply a half-cubic sink flux and observe the correct behavior
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 2
xmin = -1
xmax = 1
ymin = -1
ymax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[ppwater]
[]
[ppgas]
[]
[massfrac_ph0_sp0]
[]
[massfrac_ph1_sp0]
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'ppwater ppgas massfrac_ph0_sp0 massfrac_ph1_sp0'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[ICs]
[ppwater]
type = RandomIC
variable = ppwater
min = -1
max = 0
[]
[ppgas]
type = RandomIC
variable = ppgas
min = 0
max = 1
[]
[massfrac_ph0_sp0]
type = RandomIC
variable = massfrac_ph0_sp0
min = 0
max = 1
[]
[massfrac_ph1_sp0]
type = RandomIC
variable = massfrac_ph1_sp0
min = 0
max = 1
[]
[]
[Kernels]
[dummy_ppwater]
type = TimeDerivative
variable = ppwater
[]
[dummy_ppgas]
type = TimeDerivative
variable = ppgas
[]
[dummy_m00]
type = TimeDerivative
variable = massfrac_ph0_sp0
[]
[dummy_m10]
type = TimeDerivative
variable = massfrac_ph1_sp0
[]
[]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 1.5
density0 = 1
thermal_expansion = 0
viscosity = 1
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 0.5
density0 = 0.5
thermal_expansion = 0
viscosity = 1.4
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePP
phase0_porepressure = ppwater
phase1_porepressure = ppgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph1_sp0'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 2 0 0 0 3'
[]
[relperm0]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[relperm1]
type = PorousFlowRelativePermeabilityCorey
n = 3
phase = 1
[]
[]
[BCs]
[flux_w]
type = PorousFlowHalfCubicSink
boundary = 'left'
center = 0.1
cutoff = -1.1
max = 2.2
variable = ppwater
mass_fraction_component = 0
fluid_phase = 0
use_relperm = true
use_mobility = true
flux_function = 'x*y'
[]
[flux_g]
type = PorousFlowHalfCubicSink
boundary = 'top left front'
center = 0.5
cutoff = -1.1
max = -2.2
mass_fraction_component = 0
variable = ppgas
fluid_phase = 1
use_relperm = true
use_mobility = true
flux_function = '-x*y'
[]
[flux_1]
type = PorousFlowHalfCubicSink
boundary = 'right'
center = -0.1
cutoff = -1.1
max = 1.2
mass_fraction_component = 1
variable = massfrac_ph0_sp0
fluid_phase = 1
use_relperm = true
use_mobility = true
flux_function = '-1.1*x*y'
[]
[flux_2]
type = PorousFlowHalfCubicSink
boundary = 'bottom'
center = 3.2
cutoff = -1.1
max = 1.2
mass_fraction_component = 1
variable = massfrac_ph1_sp0
fluid_phase = 1
use_relperm = true
use_mobility = true
flux_function = '0.5*x*y'
[]
[]
[Preconditioning]
[check]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -snes_type'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000 test'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 2
[]
[Outputs]
file_base = hcs01
[]
(modules/porous_flow/test/tests/heterogeneous_materials/constant_poroperm2.i)
# Assign porosity and permeability variables from constant AuxVariables to create
# a heterogeneous model
[Mesh]
type = GeneratedMesh
dim = 3
nx = 3
ny = 3
nz = 3
xmin = 1
xmax = 4
ymin = 1
ymax = 4
zmin = 1
zmax = 4
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 -10'
[]
[Variables]
[ppwater]
initial_condition = 1e6
[]
[]
[AuxVariables]
[poro]
family = MONOMIAL
order = CONSTANT
[]
[permxx]
family = MONOMIAL
order = CONSTANT
[]
[permxy]
family = MONOMIAL
order = CONSTANT
[]
[permxz]
family = MONOMIAL
order = CONSTANT
[]
[permyx]
family = MONOMIAL
order = CONSTANT
[]
[permyy]
family = MONOMIAL
order = CONSTANT
[]
[permyz]
family = MONOMIAL
order = CONSTANT
[]
[permzx]
family = MONOMIAL
order = CONSTANT
[]
[permzy]
family = MONOMIAL
order = CONSTANT
[]
[permzz]
family = MONOMIAL
order = CONSTANT
[]
[poromat]
family = MONOMIAL
order = CONSTANT
[]
[permxxmat]
family = MONOMIAL
order = CONSTANT
[]
[permxymat]
family = MONOMIAL
order = CONSTANT
[]
[permxzmat]
family = MONOMIAL
order = CONSTANT
[]
[permyxmat]
family = MONOMIAL
order = CONSTANT
[]
[permyymat]
family = MONOMIAL
order = CONSTANT
[]
[permyzmat]
family = MONOMIAL
order = CONSTANT
[]
[permzxmat]
family = MONOMIAL
order = CONSTANT
[]
[permzymat]
family = MONOMIAL
order = CONSTANT
[]
[permzzmat]
family = MONOMIAL
order = CONSTANT
[]
[]
[AuxKernels]
[poromat]
type = PorousFlowPropertyAux
property = porosity
variable = poromat
[]
[permxxmat]
type = PorousFlowPropertyAux
property = permeability
variable = permxxmat
column = 0
row = 0
[]
[permxymat]
type = PorousFlowPropertyAux
property = permeability
variable = permxymat
column = 1
row = 0
[]
[permxzmat]
type = PorousFlowPropertyAux
property = permeability
variable = permxzmat
column = 2
row = 0
[]
[permyxmat]
type = PorousFlowPropertyAux
property = permeability
variable = permyxmat
column = 0
row = 1
[]
[permyymat]
type = PorousFlowPropertyAux
property = permeability
variable = permyymat
column = 1
row = 1
[]
[permyzmat]
type = PorousFlowPropertyAux
property = permeability
variable = permyzmat
column = 2
row = 1
[]
[permzxmat]
type = PorousFlowPropertyAux
property = permeability
variable = permzxmat
column = 0
row = 2
[]
[permzymat]
type = PorousFlowPropertyAux
property = permeability
variable = permzymat
column = 1
row = 2
[]
[permzzmat]
type = PorousFlowPropertyAux
property = permeability
variable = permzzmat
column = 2
row = 2
[]
[]
[ICs]
[poro]
type = RandomIC
seed = 0
variable = poro
max = 0.5
min = 0.1
[]
[permxx]
type = FunctionIC
function = permxx
variable = permxx
[]
[permxy]
type = FunctionIC
function = permxy
variable = permxy
[]
[permxz]
type = FunctionIC
function = permxz
variable = permxz
[]
[permyx]
type = FunctionIC
function = permyx
variable = permyx
[]
[permyy]
type = FunctionIC
function = permyy
variable = permyy
[]
[permyz]
type = FunctionIC
function = permyz
variable = permyz
[]
[permzx]
type = FunctionIC
function = permzx
variable = permzx
[]
[permzy]
type = FunctionIC
function = permzy
variable = permzy
[]
[permzz]
type = FunctionIC
function = permzz
variable = permzz
[]
[]
[Functions]
[permxx]
type = ParsedFunction
expression = '(x*x)*1e-11'
[]
[permxy]
type = ParsedFunction
expression = '(x*y)*1e-11'
[]
[permxz]
type = ParsedFunction
expression = '(x*z)*1e-11'
[]
[permyx]
type = ParsedFunction
expression = '(y*x)*1e-11'
[]
[permyy]
type = ParsedFunction
expression = '(y*y)*1e-11'
[]
[permyz]
type = ParsedFunction
expression = '(y*z)*1e-11'
[]
[permzx]
type = ParsedFunction
expression = '(z*x)*1e-11'
[]
[permzy]
type = ParsedFunction
expression = '(z*y)*1e-11'
[]
[permzz]
type = ParsedFunction
expression = '(z*z)*1e-11'
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
variable = ppwater
[]
[flux0]
type = PorousFlowAdvectiveFlux
variable = ppwater
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'ppwater'
number_fluid_phases = 1
number_fluid_components = 1
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e9
density0 = 1000
viscosity = 1e-3
thermal_expansion = 0
cv = 2
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseFullySaturated
porepressure = ppwater
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = poro
[]
[permeability]
type = PorousFlowPermeabilityConstFromVar
perm_xx = permxx
perm_xy = permxy
perm_xz = permxz
perm_yx = permyx
perm_yy = permyy
perm_yz = permyz
perm_zx = permzx
perm_zy = permzy
perm_zz = permzz
[]
[relperm_water]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[]
[Postprocessors]
[mass_ph0]
type = PorousFlowFluidMass
fluid_component = 0
execute_on = 'initial timestep_end'
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol'
petsc_options_value = 'bcgs bjacobi 1E-12 1E-10'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
end_time = 100
dt = 100
[]
[Outputs]
execute_on = 'initial timestep_end'
exodus = true
perf_graph = true
[]
(modules/porous_flow/test/tests/heterogeneous_materials/constant_poroperm3.i)
# Assign porosity and permeability variables from constant AuxVariables read from the mesh
# to create a heterogeneous model
[Mesh]
type = FileMesh
file = 'gold/constant_poroperm2_out.e'
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 -10'
[]
[Problem]
allow_initial_conditions_with_restart = true
[]
[Variables]
[ppwater]
initial_condition = 1e6
[]
[]
[AuxVariables]
[poro]
family = MONOMIAL
order = CONSTANT
initial_from_file_var = poro
[]
[permxx]
family = MONOMIAL
order = CONSTANT
initial_from_file_var = permxx
[]
[permxy]
family = MONOMIAL
order = CONSTANT
initial_from_file_var = permxy
[]
[permxz]
family = MONOMIAL
order = CONSTANT
initial_from_file_var = permxz
[]
[permyx]
family = MONOMIAL
order = CONSTANT
initial_from_file_var = permyx
[]
[permyy]
family = MONOMIAL
order = CONSTANT
initial_from_file_var = permyy
[]
[permyz]
family = MONOMIAL
order = CONSTANT
initial_from_file_var = permyz
[]
[permzx]
family = MONOMIAL
order = CONSTANT
initial_from_file_var = permzx
[]
[permzy]
family = MONOMIAL
order = CONSTANT
initial_from_file_var = permzy
[]
[permzz]
family = MONOMIAL
order = CONSTANT
initial_from_file_var = permzz
[]
[poromat]
family = MONOMIAL
order = CONSTANT
[]
[permxxmat]
family = MONOMIAL
order = CONSTANT
[]
[permxymat]
family = MONOMIAL
order = CONSTANT
[]
[permxzmat]
family = MONOMIAL
order = CONSTANT
[]
[permyxmat]
family = MONOMIAL
order = CONSTANT
[]
[permyymat]
family = MONOMIAL
order = CONSTANT
[]
[permyzmat]
family = MONOMIAL
order = CONSTANT
[]
[permzxmat]
family = MONOMIAL
order = CONSTANT
[]
[permzymat]
family = MONOMIAL
order = CONSTANT
[]
[permzzmat]
family = MONOMIAL
order = CONSTANT
[]
[]
[AuxKernels]
[poromat]
type = PorousFlowPropertyAux
property = porosity
variable = poromat
[]
[permxxmat]
type = PorousFlowPropertyAux
property = permeability
variable = permxxmat
column = 0
row = 0
[]
[permxymat]
type = PorousFlowPropertyAux
property = permeability
variable = permxymat
column = 1
row = 0
[]
[permxzmat]
type = PorousFlowPropertyAux
property = permeability
variable = permxzmat
column = 2
row = 0
[]
[permyxmat]
type = PorousFlowPropertyAux
property = permeability
variable = permyxmat
column = 0
row = 1
[]
[permyymat]
type = PorousFlowPropertyAux
property = permeability
variable = permyymat
column = 1
row = 1
[]
[permyzmat]
type = PorousFlowPropertyAux
property = permeability
variable = permyzmat
column = 2
row = 1
[]
[permzxmat]
type = PorousFlowPropertyAux
property = permeability
variable = permzxmat
column = 0
row = 2
[]
[permzymat]
type = PorousFlowPropertyAux
property = permeability
variable = permzymat
column = 1
row = 2
[]
[permzzmat]
type = PorousFlowPropertyAux
property = permeability
variable = permzzmat
column = 2
row = 2
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
variable = ppwater
[]
[flux0]
type = PorousFlowAdvectiveFlux
variable = ppwater
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'ppwater'
number_fluid_phases = 1
number_fluid_components = 1
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e9
density0 = 1000
viscosity = 1e-3
thermal_expansion = 0
cv = 2
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseFullySaturated
porepressure = ppwater
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = poro
[]
[permeability]
type = PorousFlowPermeabilityConstFromVar
perm_xx = permxx
perm_xy = permxy
perm_xz = permxz
perm_yx = permyx
perm_yy = permyy
perm_yz = permyz
perm_zx = permzx
perm_zy = permzy
perm_zz = permzz
[]
[relperm_water]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[]
[Postprocessors]
[mass_ph0]
type = PorousFlowFluidMass
fluid_component = 0
execute_on = 'initial timestep_end'
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol'
petsc_options_value = 'bcgs bjacobi 1E-12 1E-10'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
end_time = 100
dt = 100
[]
[Outputs]
execute_on = 'initial timestep_end'
exodus = true
perf_graph = true
file_base = constant_poroperm2_out
[]
(modules/porous_flow/test/tests/jacobian/heat_advection02.i)
# 2phase, unsaturated, heat advection
[Mesh]
type = GeneratedMesh
dim = 2
nx = 2
xmin = 0
xmax = 1
ny = 1
ymin = 0
ymax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[temp]
[]
[pgas]
[]
[pwater]
[]
[]
[ICs]
[pgas]
type = RandomIC
variable = pgas
max = 1.0
min = 0.0
[]
[pwater]
type = RandomIC
variable = pwater
max = 0.0
min = -1.0
[]
[temp]
type = RandomIC
variable = temp
max = 1.0
min = 0.0
[]
[]
[Kernels]
[dummy_pgas]
type = Diffusion
variable = pgas
[]
[dummy_pwater]
type = Diffusion
variable = pwater
[]
[heat_advection]
type = PorousFlowHeatAdvection
variable = temp
gravity = '1 2 3'
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'temp pgas pwater'
number_fluid_phases = 2
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 0.5
density0 = 1
thermal_expansion = 0
viscosity = 1
cv = 1.1
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 0.8
density0 = 0.7
thermal_expansion = 0
viscosity = 1.3
cv = 1.6
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = temp
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 2 0 0 0 3'
[]
[relperm0]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[relperm1]
type = PorousFlowRelativePermeabilityCorey
n = 3
phase = 1
[]
[ppss]
type = PorousFlow2PhasePP
phase0_porepressure = pwater
phase1_porepressure = pgas
capillary_pressure = pc
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[]
[Preconditioning]
active = check
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000'
[]
[check]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -snes_type'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000 test'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
[Outputs]
exodus = false
[]
(modules/porous_flow/test/tests/jacobian/fflux08.i)
# 1phase, 1component, constant viscosity, Kozeny-Carman permeability
# density with constant bulk, Corey relative perm, nonzero gravity, unsaturated with vanGenuchten
[Mesh]
type = GeneratedMesh
dim = 3
[]
[GlobalParams]
PorousFlowDictator = dictator
displacements = 'disp_x disp_y disp_z'
[]
[Variables]
[disp_x]
[]
[disp_y]
[]
[disp_z]
[]
[pp]
[]
[]
[ICs]
[disp_x]
type = RandomIC
variable = disp_x
min = -0.1
max = 0.1
[]
[disp_y]
type = RandomIC
variable = disp_y
min = -0.1
max = 0.1
[]
[disp_z]
type = RandomIC
variable = disp_z
min = -0.1
max = 0.1
[]
[pp]
type = RandomIC
variable = pp
min = -1
max = 1
[]
[]
[Kernels]
[grad_stress_x]
type = StressDivergenceTensors
variable = disp_x
component = 0
[]
[grad_stress_y]
type = StressDivergenceTensors
variable = disp_y
component = 1
[]
[grad_stress_z]
type = StressDivergenceTensors
variable = disp_z
component = 2
[]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = pp
gravity = '-1 -0.1 0'
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp disp_x disp_y disp_z'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1.5
density0 = 1
thermal_expansion = 0
viscosity = 1
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[elasticity_tensor]
type = ComputeElasticityTensor
C_ijkl = '0.5 0.75'
# bulk modulus is lambda + 2*mu/3 = 0.5 + 2*0.75/3 = 1
fill_method = symmetric_isotropic
[]
[strain]
type = ComputeSmallStrain
[]
[stress]
type = ComputeLinearElasticStress
[]
[vol_strain]
type = PorousFlowVolumetricStrain
[]
[porosity]
type = PorousFlowPorosity
fluid = true
mechanical = true
porosity_zero = 0.1
biot_coefficient = 0.5
solid_bulk = 1
[]
[p_eff]
type = PorousFlowEffectiveFluidPressure
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[permeability]
type = PorousFlowPermeabilityKozenyCarman
poroperm_function = kozeny_carman_phi0
k_anisotropy = '1 0 0 0 2 0 0 0 3'
phi0 = 0.1
n = 1.0
m = 2.0
k0 = 2
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[]
[Preconditioning]
active = check
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000'
[]
[check]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -snes_type'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000 test'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
[Outputs]
exodus = false
[]
(modules/porous_flow/test/tests/fluidstate/coldwater_injection_radial.i)
# Cold water injection into 1D radial hot reservoir (Avdonin, 1964)
#
# To generate results presented in documentation for this problem,
# set xmax = 1000 and nx = 200 in the Mesh block, and dtmax = 1e4
# and end_time = 1e6 in the Executioner block.
[Mesh]
type = GeneratedMesh
dim = 1
nx = 50
xmin = 0.1
xmax = 5
bias_x = 1.05
rz_coord_axis = Y
coord_type = RZ
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[AuxVariables]
[temperature]
order = CONSTANT
family = MONOMIAL
[]
[]
[AuxKernels]
[temperature]
type = PorousFlowPropertyAux
variable = temperature
property = temperature
execute_on = 'initial timestep_end'
[]
[]
[Variables]
[pliquid]
initial_condition = 5e6
[]
[h]
scaling = 1e-6
[]
[]
[ICs]
[hic]
type = PorousFlowFluidPropertyIC
variable = h
porepressure = pliquid
property = enthalpy
temperature = 170
temperature_unit = Celsius
fp = water
[]
[]
[Functions]
[injection_rate]
type = ParsedFunction
symbol_values = injection_area
symbol_names = area
expression = '-0.1/area'
[]
[]
[BCs]
[source]
type = PorousFlowSink
variable = pliquid
flux_function = injection_rate
boundary = left
[]
[pright]
type = DirichletBC
variable = pliquid
value = 5e6
boundary = right
[]
[hleft]
type = DirichletBC
variable = h
value = 678.52e3
boundary = left
[]
[hright]
type = DirichletBC
variable = h
value = 721.4e3
boundary = right
[]
[]
[Kernels]
[mass]
type = PorousFlowMassTimeDerivative
variable = pliquid
[]
[massflux]
type = PorousFlowAdvectiveFlux
variable = pliquid
[]
[heat]
type = PorousFlowEnergyTimeDerivative
variable = h
[]
[heatflux]
type = PorousFlowHeatAdvection
variable = h
[]
[heatcond]
type = PorousFlowHeatConduction
variable = h
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pliquid h'
number_fluid_phases = 2
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
pc_max = 1e6
sat_lr = 0.1
m = 0.5
alpha = 1e-5
[]
[fs]
type = PorousFlowWaterVapor
water_fp = water
capillary_pressure = pc
[]
[]
[FluidProperties]
[water]
type = Water97FluidProperties
[]
[]
[Materials]
[watervapor]
type = PorousFlowFluidStateSingleComponent
porepressure = pliquid
enthalpy = h
temperature_unit = Celsius
capillary_pressure = pc
fluid_state = fs
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.2
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1.8e-11 0 0 0 1.8e-11 0 0 0 1.8e-11'
[]
[relperm_water]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
s_res = 0.1
sum_s_res = 0.1
[]
[relperm_gas]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 1
sum_s_res = 0.1
[]
[internal_energy]
type = PorousFlowMatrixInternalEnergy
density = 2900
specific_heat_capacity = 740
[]
[rock_thermal_conductivity]
type = PorousFlowThermalConductivityIdeal
dry_thermal_conductivity = '20 0 0 0 20 0 0 0 20'
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = NEWTON
end_time = 1e3
nl_abs_tol = 1e-8
[TimeStepper]
type = IterationAdaptiveDT
dt = 100
[]
[]
[Postprocessors]
[injection_area]
type = AreaPostprocessor
boundary = left
execute_on = initial
[]
[]
[VectorPostprocessors]
[line]
type = ElementValueSampler
sort_by = x
variable = temperature
execute_on = 'initial timestep_end'
[]
[]
[Outputs]
perf_graph = true
[csv]
type = CSV
execute_on = final
[]
[]
(modules/porous_flow/test/tests/dirackernels/bh_except08.i)
# PorousFlowPeacemanBorehole exception test
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 1
xmin = -1
xmax = 1
ymin = -1
ymax = 1
zmin = -1
zmax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
initial_condition = 1E7
[]
[]
[Kernels]
[mass0]
type = TimeDerivative
variable = pp
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[borehole_total_outflow_mass]
type = PorousFlowSumQuantity
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1e-7
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e9
viscosity = 1e-3
density0 = 1000
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-12 0 0 0 1E-12 0 0 0 1E-12'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
at_nodes = false # Needed to force expected error
[]
[]
[DiracKernels]
[bh]
type = PorousFlowPeacemanBorehole
bottom_p_or_t = 0
fluid_phase = 0
point_file = bh02.bh
use_mobility = true
SumQuantityUO = borehole_total_outflow_mass
variable = pp
unit_weight = '0 0 0'
character = 1
[]
[]
[Postprocessors]
[bh_report]
type = PorousFlowPlotQuantity
uo = borehole_total_outflow_mass
[]
[fluid_mass0]
type = PorousFlowFluidMass
execute_on = timestep_begin
[]
[fluid_mass1]
type = PorousFlowFluidMass
execute_on = timestep_end
[]
[zmass_error]
type = FunctionValuePostprocessor
function = mass_bal_fcn
execute_on = timestep_end
[]
[p0]
type = PointValue
variable = pp
point = '0 0 0'
execute_on = timestep_end
[]
[]
[Functions]
[mass_bal_fcn]
type = ParsedFunction
expression = abs((a-c+d)/2/(a+c))
symbol_names = 'a c d'
symbol_values = 'fluid_mass1 fluid_mass0 bh_report'
[]
[]
[Preconditioning]
[usual]
type = SMP
full = true
petsc_options = '-snes_converged_reason'
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -ksp_max_it'
petsc_options_value = 'bcgs bjacobi 1E-10 1E-10 10000 30'
[]
[]
[Executioner]
type = Transient
end_time = 0.5
dt = 1E-2
solve_type = NEWTON
[]
(modules/porous_flow/test/tests/pressure_pulse/pressure_pulse_1d_steady.i)
# Pressure pulse in 1D with 1 phase - steady
[Mesh]
type = GeneratedMesh
dim = 1
nx = 10
xmin = 0
xmax = 100
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
initial_condition = 2E6
[]
[]
[Kernels]
active = flux
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
[]
[flux]
type = PorousFlowAdvectiveFlux
variable = pp
gravity = '0 0 0'
fluid_component = 0
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1e-7
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e9
density0 = 1000
thermal_expansion = 0
viscosity = 1e-3
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-15 0 0 0 1E-15 0 0 0 1E-15'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 0
phase = 0
[]
[]
[BCs]
[left]
type = DirichletBC
boundary = left
value = 3E6
variable = pp
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-20 10000'
[]
[]
[Executioner]
type = Steady
solve_type = Newton
[]
[Postprocessors]
[p000]
type = PointValue
variable = pp
point = '0 0 0'
execute_on = 'initial timestep_end'
[]
[p010]
type = PointValue
variable = pp
point = '10 0 0'
execute_on = 'initial timestep_end'
[]
[p020]
type = PointValue
variable = pp
point = '20 0 0'
execute_on = 'initial timestep_end'
[]
[p030]
type = PointValue
variable = pp
point = '30 0 0'
execute_on = 'initial timestep_end'
[]
[p040]
type = PointValue
variable = pp
point = '40 0 0'
execute_on = 'initial timestep_end'
[]
[p050]
type = PointValue
variable = pp
point = '50 0 0'
execute_on = 'initial timestep_end'
[]
[p060]
type = PointValue
variable = pp
point = '60 0 0'
execute_on = 'initial timestep_end'
[]
[p070]
type = PointValue
variable = pp
point = '70 0 0'
execute_on = 'initial timestep_end'
[]
[p080]
type = PointValue
variable = pp
point = '80 0 0'
execute_on = 'initial timestep_end'
[]
[p090]
type = PointValue
variable = pp
point = '90 0 0'
execute_on = 'initial timestep_end'
[]
[p100]
type = PointValue
variable = pp
point = '100 0 0'
execute_on = 'initial timestep_end'
[]
[]
[Outputs]
file_base = pressure_pulse_1d_steady
print_linear_residuals = false
csv = true
[]
(modules/porous_flow/test/tests/jacobian/pls03.i)
# PorousFlowPiecewiseLinearSink with 2-phase, 3-components
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 2
nz = 1
xmin = -1
xmax = 1
ymin = -1
ymax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[ppwater]
[]
[ppgas]
[]
[massfrac_ph0_sp0]
[]
[massfrac_ph0_sp1]
[]
[massfrac_ph1_sp0]
[]
[massfrac_ph1_sp1]
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'ppwater ppgas massfrac_ph0_sp0 massfrac_ph0_sp1 massfrac_ph1_sp0 massfrac_ph1_sp1'
number_fluid_phases = 2
number_fluid_components = 3
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[ICs]
[ppwater]
type = RandomIC
variable = ppwater
min = -1
max = 0
[]
[ppgas]
type = RandomIC
variable = ppgas
min = 0
max = 1
[]
[massfrac_ph0_sp0]
type = RandomIC
variable = massfrac_ph0_sp0
min = 0
max = 1
[]
[massfrac_ph0_sp1]
type = RandomIC
variable = massfrac_ph0_sp1
min = 0
max = 1
[]
[massfrac_ph1_sp0]
type = RandomIC
variable = massfrac_ph1_sp0
min = 0
max = 1
[]
[massfrac_ph1_sp1]
type = RandomIC
variable = massfrac_ph1_sp1
min = 0
max = 1
[]
[]
[Kernels]
[dummy_ppwater]
type = TimeDerivative
variable = ppwater
[]
[dummy_ppgas]
type = TimeDerivative
variable = ppgas
[]
[dummy_m00]
type = TimeDerivative
variable = massfrac_ph0_sp0
[]
[dummy_m01]
type = TimeDerivative
variable = massfrac_ph0_sp1
[]
[dummy_m10]
type = TimeDerivative
variable = massfrac_ph1_sp0
[]
[dummy_m11]
type = TimeDerivative
variable = massfrac_ph1_sp1
[]
[]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 1.5
density0 = 1
thermal_expansion = 0
viscosity = 1
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 0.5
density0 = 0.5
thermal_expansion = 0
viscosity = 1.4
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePP
phase0_porepressure = ppwater
phase1_porepressure = ppgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph0_sp1 massfrac_ph1_sp0 massfrac_ph1_sp1'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 2 0 0 0 3'
[]
[relperm0]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[relperm1]
type = PorousFlowRelativePermeabilityCorey
n = 3
phase = 1
[]
[]
[BCs]
[flux_w]
type = PorousFlowPiecewiseLinearSink
boundary = 'left'
pt_vals = '-1 -0.5 0'
multipliers = '1 2 4'
variable = ppwater
mass_fraction_component = 0
fluid_phase = 0
use_relperm = true
use_mobility = true
flux_function = 'x*y'
[]
[flux_g]
type = PorousFlowPiecewiseLinearSink
boundary = 'top'
pt_vals = '0 0.5 1'
multipliers = '1 -2 4'
mass_fraction_component = 0
variable = ppgas
fluid_phase = 1
use_relperm = true
use_mobility = true
flux_function = '-x*y'
[]
[flux_1]
type = PorousFlowPiecewiseLinearSink
boundary = 'right'
pt_vals = '0 0.5 1'
multipliers = '1 3 4'
mass_fraction_component = 1
variable = massfrac_ph0_sp0
fluid_phase = 0
use_relperm = true
use_mobility = true
[]
[flux_2]
type = PorousFlowPiecewiseLinearSink
boundary = 'back top'
pt_vals = '0 0.5 1'
multipliers = '0 1 -3'
mass_fraction_component = 1
variable = massfrac_ph1_sp0
fluid_phase = 1
use_relperm = true
use_mobility = true
flux_function = '0.5*x*y'
[]
[flux_3]
type = PorousFlowPiecewiseLinearSink
boundary = 'right'
pt_vals = '0 0.5 1'
multipliers = '1 3 4'
mass_fraction_component = 2
variable = ppwater
fluid_phase = 0
use_relperm = true
use_mobility = true
[]
[flux_4]
type = PorousFlowPiecewiseLinearSink
boundary = 'back top'
pt_vals = '0 0.5 1'
multipliers = '0 1 -3'
mass_fraction_component = 2
variable = massfrac_ph1_sp0
fluid_phase = 1
use_relperm = true
use_mobility = true
flux_function = '-0.5*x*y'
[]
[]
[Preconditioning]
[check]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -snes_type'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000 test'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 2
[]
[Outputs]
file_base = pls03
[]
(modules/porous_flow/test/tests/dirackernels/theis2.i)
# Theis problem: Flow to single sink
# Constant rate injection between 200 and 1000 s.
# Cartesian mesh with logarithmic distribution in x and y.
[Mesh]
type = GeneratedMesh
dim = 2
nx = 20
ny = 20
bias_x = 1.1
bias_y = 1.1
ymax = 100
xmax = 100
[]
[GlobalParams]
PorousFlowDictator = dictator
compute_enthalpy = false
compute_internal_energy = false
[]
[Variables]
[pp]
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
[]
[flux]
type = PorousFlowAdvectiveFlux
variable = pp
gravity = '0 0 0'
fluid_component = 0
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1e-7
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e9
density0 = 1000
viscosity = 0.001
thermal_expansion = 0
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.2
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-14 0 0 0 1E-14 0 0 0 1E-14'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 0
phase = 0
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 200
end_time = 1000
nl_abs_tol = 1e-10
[]
[Outputs]
perf_graph = true
file_base = theis2
[csv]
type = CSV
execute_on = final
[]
[]
[ICs]
[PressureIC]
variable = pp
type = ConstantIC
value = 20e6
[]
[]
[DiracKernels]
[sink]
type = PorousFlowSquarePulsePointSource
start_time = 200
end_time = 1000
point = '0 0 0'
mass_flux = -0.04
variable = pp
[]
[]
[BCs]
[right]
type = DirichletBC
variable = pp
value = 20e6
boundary = right
[]
[top]
type = DirichletBC
variable = pp
value = 20e6
boundary = top
[]
[]
[VectorPostprocessors]
[pressure]
type = SideValueSampler
variable = pp
sort_by = x
execute_on = timestep_end
boundary = bottom
[]
[]
(modules/porous_flow/test/tests/dirackernels/pls02reporter.i)
# fully-saturated situation with a poly-line sink with use_mobility=true
# The poly-line consists of 2 points, and has a length
# of 0.5. Each point is weighted with a weight of 0.1
# The PorousFlowPolyLineSink has
# p_or_t_vals = 0 1E7
# fluxes = 0 1
# so that for 0<=porepressure<=1E7
# base flux = porepressure * 1E-6 * mobility (measured in kg.m^-1.s^-1),
# and when multiplied by the poly-line length, and
# the weighting of each point, the mass flux is
# flux = porepressure * 0.5*E-8 * mobility (kg.s^-1).
#
# The fluid and matrix properties are:
# porosity = 0.1
# element volume = 8 m^3
# density = dens0 * exp(P / bulk), with bulk = 2E7
# initial porepressure P0 = 1E7
# viscosity = 0.2
# So, fluid mass = 0.8 * density (kg)
#
# The equation to solve is
# d(Mass)/dt = - porepressure * 0.5*E-8 * density / viscosity
#
# PorousFlow discretises time to conserve mass, so to march
# forward in time, we must solve
# Mass(dt) = Mass(0) - P * 0.5E-8 * density / viscosity * dt
# or
# 0.8 * dens0 * exp(P/bulk) = 0.8 * dens0 * exp(P0/bulk) - P * 0.5E-8 * density / viscosity * dt
# For the numbers written above this gives
# P(t=1) = 6.36947 MPa
# which is given precisely by MOOSE
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 1
xmin = -1
xmax = 1
ymin = -1
ymax = 1
zmin = -1
zmax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
initial_condition = 1E7
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
[]
[]
[UserObjects]
[pls_total_outflow_mass]
type = PorousFlowSumQuantity
[]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1e-7
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e7
viscosity = 0.2
density0 = 1000
thermal_expansion = 0
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-12 0 0 0 1E-12 0 0 0 1E-12'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[]
[DiracKernels]
[pls]
# This defines a sink that has strength
# f = L(P) * relperm * L_seg
# where
# L(P) is a piecewise-linear function of porepressure
# that is zero at pp=0 and 1 at pp=1E7
# relperm is the relative permeability of the fluid
# L_seg is the line-segment length associated with
# the Dirac points defined in the file pls02.bh
type = PorousFlowPolyLineSink
# Because the Variable for this Sink is pp, and pp is associated
# with the fluid-mass conservation equation, this sink is extracting
# fluid mass (and not heat energy or something else)
variable = pp
# The following specfies that the total fluid mass coming out of
# the porespace via this sink in this timestep should be recorded
# in the pls_total_outflow_mass UserObject
SumQuantityUO = pls_total_outflow_mass
# The following file defines the polyline geometry
# which is just two points in this particular example
weight_reporter='pls02file/w'
x_coord_reporter='pls02file/x'
y_coord_reporter='pls02file/y'
z_coord_reporter='pls02file/z'
# Now define the piecewise-linear function, L
# First, we want L to be a function of porepressure (and not
# temperature or something else). The following means that
# p_or_t_vals should be intepreted by MOOSE as the zeroth-phase
# porepressure
function_of = pressure
fluid_phase = 0
# Second, define the piecewise-linear function, L
# The following means
# flux=0 when pp=0 (and also pp<0)
# flux=1 when pp=1E7 (and also pp>1E7)
# flux=linearly intepolated between pp=0 and pp=1E7
# When flux>0 this means a sink, while flux<0 means a source
p_or_t_vals = '0 1E7'
fluxes = '0 1'
# Finally, in this case we want to always multiply
# L by the fluid mobility (of the zeroth phase) and
# use that in the sink strength instead of the bare L
# computed above
use_mobility = true
[]
[]
[Reporters]
[pls02file]
# contains contents from pls02.bh
type=ConstantReporter
real_vector_names = 'w x y z'
real_vector_values = '0.10 0.10;
0.00 0.00;
0.00 0.00;
-0.25 0.25'
[]
[]
[Postprocessors]
[pls_report]
type = PorousFlowPlotQuantity
uo = pls_total_outflow_mass
[]
[fluid_mass0]
type = PorousFlowFluidMass
execute_on = timestep_begin
[]
[fluid_mass1]
type = PorousFlowFluidMass
execute_on = timestep_end
[]
[zmass_error]
type = FunctionValuePostprocessor
function = mass_bal_fcn
execute_on = timestep_end
indirect_dependencies = 'fluid_mass1 fluid_mass0 pls_report'
[]
[p0]
type = PointValue
variable = pp
point = '0 0 0'
execute_on = timestep_end
[]
[]
[Functions]
[mass_bal_fcn]
type = ParsedFunction
expression = abs((a-c+d)/2/(a+c))
symbol_names = 'a c d'
symbol_values = 'fluid_mass1 fluid_mass0 pls_report'
[]
[]
[Preconditioning]
[usual]
type = SMP
full = true
petsc_options = '-snes_converged_reason'
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -ksp_max_it'
petsc_options_value = 'bcgs bjacobi 1E-10 1E-10 10000 30'
[]
[]
[Executioner]
type = Transient
end_time = 1
dt = 1
solve_type = NEWTON
[]
[Outputs]
exodus = false
csv = true
execute_on = timestep_end
[]
(modules/porous_flow/test/tests/sinks/injection_production_eg.i)
# phase = 0 is liquid phase
# phase = 1 is gas phase
# fluid_component = 0 is water
# fluid_component = 1 is CO2
# Constant rate of CO2 injection into the left boundary
# 1D mesh
# The PorousFlowPiecewiseLinearSinks remove the correct water and CO2 from the right boundary
# Note i take pretty big timesteps here so the system is quite nonlinear
[Mesh]
type = GeneratedMesh
dim = 1
nx = 20
xmax = 20
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[AuxVariables]
[saturation_gas]
order = CONSTANT
family = MONOMIAL
[]
[frac_water_in_liquid]
initial_condition = 1.0
[]
[frac_water_in_gas]
initial_condition = 0.0
[]
[]
[AuxKernels]
[saturation_gas]
type = PorousFlowPropertyAux
variable = saturation_gas
property = saturation
phase = 1
execute_on = timestep_end
[]
[]
[Variables]
[pwater]
initial_condition = 20E6
[]
[pgas]
initial_condition = 20.1E6
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pwater
[]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = pwater
[]
[mass1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = pgas
[]
[flux1]
type = PorousFlowAdvectiveFlux
fluid_component = 1
variable = pgas
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pgas pwater'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
alpha = 1E-6
m = 0.6
[]
[]
[FluidProperties]
[true_water]
type = Water97FluidProperties
[]
[tabulated_water]
type = TabulatedBicubicFluidProperties
fp = true_water
temperature_min = 275
pressure_max = 1E8
interpolated_properties = 'density viscosity enthalpy internal_energy'
fluid_property_file = water97_tabulated_11.csv
[]
[true_co2]
type = CO2FluidProperties
[]
[tabulated_co2]
type = TabulatedBicubicFluidProperties
fp = true_co2
temperature_min = 275
pressure_max = 1E8
interpolated_properties = 'density viscosity enthalpy internal_energy'
fluid_property_file = co2_tabulated_11.csv
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = 293.15
[]
[saturation_calculator]
type = PorousFlow2PhasePP
phase0_porepressure = pwater
phase1_porepressure = pgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'frac_water_in_liquid frac_water_in_gas'
[]
[water]
type = PorousFlowSingleComponentFluid
fp = tabulated_water
phase = 0
[]
[co2]
type = PorousFlowSingleComponentFluid
fp = tabulated_co2
phase = 1
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.2
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-12 0 0 0 1e-12 0 0 0 1e-12'
[]
[relperm_water]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
s_res = 0.1
sum_s_res = 0.2
[]
[relperm_gas]
type = PorousFlowRelativePermeabilityBC
nw_phase = true
lambda = 2
s_res = 0.1
sum_s_res = 0.2
phase = 1
[]
[]
[BCs]
[co2_injection]
type = PorousFlowSink
boundary = left
variable = pgas # pgas is associated with the CO2 mass balance (fluid_component = 1 in its Kernels)
flux_function = -1E-2 # negative means a source, rather than a sink
[]
[right_water]
type = PorousFlowPiecewiseLinearSink
boundary = right
# a sink of water, since the Kernels given to pwater are for fluid_component = 0 (the water)
variable = pwater
# this Sink is a function of liquid porepressure
# Also, all the mass_fraction, mobility and relperm are referenced to the liquid phase now
fluid_phase = 0
# Sink strength = (Pwater - 20E6)
pt_vals = '0 1E9'
multipliers = '0 1E9'
PT_shift = 20E6
# multiply Sink strength computed above by mass fraction of water at the boundary
mass_fraction_component = 0
# also multiply Sink strength by mobility of the liquid
use_mobility = true
# also multiply Sink strength by the relperm of the liquid
use_relperm = true
# also multiplly Sink strength by 1/L, where L is the distance to the fixed-porepressure external environment
flux_function = 10 # 1/L
[]
[right_co2]
type = PorousFlowPiecewiseLinearSink
boundary = right
variable = pgas
fluid_phase = 1
pt_vals = '0 1E9'
multipliers = '0 1E9'
PT_shift = 20.1E6
mass_fraction_component = 1
use_mobility = true
use_relperm = true
flux_function = 10 # 1/L
[]
[]
[Preconditioning]
active = 'basic'
[basic]
type = SMP
full = true
petsc_options = '-snes_converged_reason -ksp_diagonal_scale -ksp_diagonal_scale_fix -ksp_gmres_modifiedgramschmidt -snes_linesearch_monitor'
petsc_options_iname = '-ksp_type -pc_type -sub_pc_type -sub_pc_factor_shift_type -pc_asm_overlap'
petsc_options_value = 'gmres asm lu NONZERO 2'
[]
[preferred]
type = SMP
full = true
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu mumps'
[]
[]
[Executioner]
type = Transient
solve_type = NEWTON
nl_abs_tol = 1E-13
nl_rel_tol = 1E-10
end_time = 1e4
[TimeStepper]
type = IterationAdaptiveDT
dt = 1E4
growth_factor = 1.1
[]
[]
[VectorPostprocessors]
[pps]
type = LineValueSampler
warn_discontinuous_face_values = false
start_point = '0 0 0'
end_point = '20 0 0'
num_points = 20
sort_by = x
variable = 'pgas pwater saturation_gas'
[]
[]
[Outputs]
print_linear_residuals = false
perf_graph = true
[out]
type = CSV
execute_on = final
[]
[]
(modules/porous_flow/test/tests/poro_elasticity/mandel_constM.i)
# Mandel's problem of consolodation of a drained medium
#
# A sample is in plane strain.
# -a <= x <= a
# -b <= y <= b
# It is squashed with constant force by impermeable, frictionless plattens on its top and bottom surfaces (at y=+/-b)
# Fluid is allowed to leak out from its sides (at x=+/-a)
# The porepressure within the sample is monitored.
#
# As is common in the literature, this is simulated by
# considering the quarter-sample, 0<=x<=a and 0<=y<=b, with
# impermeable, roller BCs at x=0 and y=0 and y=b.
# Porepressure is fixed at zero on x=a.
# Porepressure and displacement are initialised to zero.
# Then the top (y=b) is moved downwards with prescribed velocity,
# so that the total force that is inducing this downwards velocity
# is fixed. The velocity is worked out by solving Mandel's problem
# analytically, and the total force is monitored in the simulation
# to check that it indeed remains constant.
#
# Here are the problem's parameters, and their values:
# Soil width. a = 1
# Soil height. b = 0.1
# Soil's Lame lambda. la = 0.5
# Soil's Lame mu, which is also the Soil's shear modulus. mu = G = 0.75
# Soil bulk modulus. K = la + 2*mu/3 = 1
# Drained Poisson ratio. nu = (3K - 2G)/(6K + 2G) = 0.2
# Soil bulk compliance. 1/K = 1
# Fluid bulk modulus. Kf = 8
# Fluid bulk compliance. 1/Kf = 0.125
# Soil initial porosity. phi0 = 0.1
# Biot coefficient. alpha = 0.6
# Biot modulus. M = 1/(phi0/Kf + (alpha - phi0)(1 - alpha)/K) = 4.705882
# Undrained bulk modulus. Ku = K + alpha^2*M = 2.694118
# Undrained Poisson ratio. nuu = (3Ku - 2G)/(6Ku + 2G) = 0.372627
# Skempton coefficient. B = alpha*M/Ku = 1.048035
# Fluid mobility (soil permeability/fluid viscosity). k = 1.5
# Consolidation coefficient. c = 2*k*B^2*G*(1-nu)*(1+nuu)^2/9/(1-nuu)/(nuu-nu) = 3.821656
# Normal stress on top. F = 1
#
# The solution for porepressure and displacements is given in
# AHD Cheng and E Detournay "A direct boundary element method for plane strain poroelasticity" International Journal of Numerical and Analytical Methods in Geomechanics 12 (1988) 551-572.
# The solution involves complicated infinite series, so I shall not write it here
[Mesh]
type = GeneratedMesh
dim = 3
nx = 10
ny = 1
nz = 1
xmin = 0
xmax = 1
ymin = 0
ymax = 0.1
zmin = 0
zmax = 1
[]
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
PorousFlowDictator = dictator
block = 0
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'porepressure disp_x disp_y disp_z'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.8
alpha = 1e-5
[]
[]
[Variables]
[disp_x]
[]
[disp_y]
[]
[disp_z]
[]
[porepressure]
[]
[]
[BCs]
[roller_xmin]
type = DirichletBC
variable = disp_x
value = 0
boundary = 'left'
[]
[roller_ymin]
type = DirichletBC
variable = disp_y
value = 0
boundary = 'bottom'
[]
[plane_strain]
type = DirichletBC
variable = disp_z
value = 0
boundary = 'back front'
[]
[xmax_drained]
type = DirichletBC
variable = porepressure
value = 0
boundary = right
[]
[top_velocity]
type = FunctionDirichletBC
variable = disp_y
function = top_velocity
boundary = top
[]
[]
[Functions]
[top_velocity]
type = PiecewiseLinear
x = '0 0.002 0.006 0.014 0.03 0.046 0.062 0.078 0.094 0.11 0.126 0.142 0.158 0.174 0.19 0.206 0.222 0.238 0.254 0.27 0.286 0.302 0.318 0.334 0.35 0.366 0.382 0.398 0.414 0.43 0.446 0.462 0.478 0.494 0.51 0.526 0.542 0.558 0.574 0.59 0.606 0.622 0.638 0.654 0.67 0.686 0.702'
y = '-0.041824842 -0.042730269 -0.043412712 -0.04428867 -0.045509181 -0.04645965 -0.047268246 -0.047974749 -0.048597109 -0.0491467 -0.049632388 -0.050061697 -0.050441198 -0.050776675 -0.051073238 -0.0513354 -0.051567152 -0.051772022 -0.051953128 -0.052113227 -0.052254754 -0.052379865 -0.052490464 -0.052588233 -0.052674662 -0.052751065 -0.052818606 -0.052878312 -0.052931093 -0.052977751 -0.053018997 -0.053055459 -0.053087691 -0.053116185 -0.053141373 -0.05316364 -0.053183324 -0.053200724 -0.053216106 -0.053229704 -0.053241725 -0.053252351 -0.053261745 -0.053270049 -0.053277389 -0.053283879 -0.053289615'
[]
[]
[AuxVariables]
[stress_yy]
order = CONSTANT
family = MONOMIAL
[]
[tot_force]
order = CONSTANT
family = MONOMIAL
[]
[]
[AuxKernels]
[stress_yy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yy
index_i = 1
index_j = 1
[]
[tot_force]
type = ParsedAux
coupled_variables = 'stress_yy porepressure'
execute_on = timestep_end
variable = tot_force
expression = '-stress_yy+0.6*porepressure'
[]
[]
[Kernels]
[grad_stress_x]
type = StressDivergenceTensors
variable = disp_x
component = 0
[]
[grad_stress_y]
type = StressDivergenceTensors
variable = disp_y
component = 1
[]
[grad_stress_z]
type = StressDivergenceTensors
variable = disp_z
component = 2
[]
[poro_x]
type = PorousFlowEffectiveStressCoupling
biot_coefficient = 0.6
variable = disp_x
component = 0
[]
[poro_y]
type = PorousFlowEffectiveStressCoupling
biot_coefficient = 0.6
variable = disp_y
component = 1
[]
[poro_z]
type = PorousFlowEffectiveStressCoupling
biot_coefficient = 0.6
component = 2
variable = disp_z
[]
[poro_vol_exp]
type = PorousFlowMassVolumetricExpansion
variable = porepressure
fluid_component = 0
[]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = porepressure
[]
[flux]
type = PorousFlowAdvectiveFlux
variable = porepressure
gravity = '0 0 0'
fluid_component = 0
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 8
density0 = 1
thermal_expansion = 0
viscosity = 1
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[elasticity_tensor]
type = ComputeElasticityTensor
C_ijkl = '0.5 0.75'
# bulk modulus is lambda + 2*mu/3 = 0.5 + 2*0.75/3 = 1
fill_method = symmetric_isotropic
[]
[strain]
type = ComputeSmallStrain
[]
[stress]
type = ComputeLinearElasticStress
[]
[eff_fluid_pressure]
type = PorousFlowEffectiveFluidPressure
[]
[vol_strain]
type = PorousFlowVolumetricStrain
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = porepressure
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityHMBiotModulus
porosity_zero = 0.1
biot_coefficient = 0.6
solid_bulk = 1
constant_fluid_bulk_modulus = 8
constant_biot_modulus = 4.7058823529
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1.5 0 0 0 1.5 0 0 0 1.5'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 0 # unimportant in this fully-saturated situation
phase = 0
[]
[]
[Postprocessors]
[p0]
type = PointValue
outputs = csv
point = '0.0 0 0'
variable = porepressure
[]
[p1]
type = PointValue
outputs = csv
point = '0.1 0 0'
variable = porepressure
[]
[p2]
type = PointValue
outputs = csv
point = '0.2 0 0'
variable = porepressure
[]
[p3]
type = PointValue
outputs = csv
point = '0.3 0 0'
variable = porepressure
[]
[p4]
type = PointValue
outputs = csv
point = '0.4 0 0'
variable = porepressure
[]
[p5]
type = PointValue
outputs = csv
point = '0.5 0 0'
variable = porepressure
[]
[p6]
type = PointValue
outputs = csv
point = '0.6 0 0'
variable = porepressure
[]
[p7]
type = PointValue
outputs = csv
point = '0.7 0 0'
variable = porepressure
[]
[p8]
type = PointValue
outputs = csv
point = '0.8 0 0'
variable = porepressure
[]
[p9]
type = PointValue
outputs = csv
point = '0.9 0 0'
variable = porepressure
[]
[p99]
type = PointValue
outputs = csv
point = '1 0 0'
variable = porepressure
[]
[xdisp]
type = PointValue
outputs = csv
point = '1 0.1 0'
variable = disp_x
[]
[ydisp]
type = PointValue
outputs = csv
point = '1 0.1 0'
variable = disp_y
[]
[total_downwards_force]
type = ElementAverageValue
outputs = csv
variable = tot_force
[]
[dt]
type = FunctionValuePostprocessor
outputs = console
function = if(0.15*t<0.01,0.15*t,0.01)
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -sub_pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'gmres asm lu 1E-14 1E-10 10000'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
start_time = 0
end_time = 0.7
[TimeStepper]
type = PostprocessorDT
postprocessor = dt
dt = 0.001
[]
[]
[Outputs]
execute_on = 'timestep_end'
file_base = mandel_constM
[csv]
time_step_interval = 3
type = CSV
[]
[]
(modules/porous_flow/test/tests/sinks/injection_production_eg_outflowBC.i)
# phase = 0 is liquid phase
# phase = 1 is gas phase
# fluid_component = 0 is water
# fluid_component = 1 is CO2
# Constant rates of water and CO2 injection into the left boundary
# 1D mesh
# The PorousFlowOutflowBCs remove the correct water and CO2 from the right boundary
[Mesh]
type = GeneratedMesh
dim = 1
nx = 20
xmax = 20
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[AuxVariables]
[saturation_gas]
order = CONSTANT
family = MONOMIAL
[]
[frac_water_in_liquid]
initial_condition = 1.0
[]
[frac_water_in_gas]
initial_condition = 0.0
[]
[water_kg_per_s]
[]
[co2_kg_per_s]
[]
[]
[AuxKernels]
[saturation_gas]
type = PorousFlowPropertyAux
variable = saturation_gas
property = saturation
phase = 1
execute_on = timestep_end
[]
[]
[Variables]
[pwater]
initial_condition = 20E6
[]
[pgas]
initial_condition = 21E6
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pwater
[]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = pwater
[]
[mass1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = pgas
[]
[flux1]
type = PorousFlowAdvectiveFlux
fluid_component = 1
variable = pgas
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pgas pwater'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
alpha = 1E-6
m = 0.6
[]
[]
[FluidProperties]
[true_water]
type = Water97FluidProperties
[]
[tabulated_water]
type = TabulatedBicubicFluidProperties
fp = true_water
temperature_min = 275
pressure_max = 1E8
interpolated_properties = 'density viscosity enthalpy internal_energy'
fluid_property_file = water97_tabulated_11.csv
[]
[true_co2]
type = CO2FluidProperties
[]
[tabulated_co2]
type = TabulatedBicubicFluidProperties
fp = true_co2
temperature_min = 275
pressure_max = 1E8
interpolated_properties = 'density viscosity enthalpy internal_energy'
fluid_property_file = co2_tabulated_11.csv
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = 293.15
[]
[saturation_calculator]
type = PorousFlow2PhasePP
phase0_porepressure = pwater
phase1_porepressure = pgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'frac_water_in_liquid frac_water_in_gas'
[]
[water]
type = PorousFlowSingleComponentFluid
fp = tabulated_water
phase = 0
[]
[co2]
type = PorousFlowSingleComponentFluid
fp = tabulated_co2
phase = 1
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.2
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-12 0 0 0 1e-12 0 0 0 1e-12'
[]
[relperm_water]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
s_res = 0.1
sum_s_res = 0.2
[]
[relperm_gas]
type = PorousFlowRelativePermeabilityBC
nw_phase = true
lambda = 2
s_res = 0.1
sum_s_res = 0.2
phase = 1
[]
[]
[BCs]
[water_injection]
type = PorousFlowSink
boundary = left
variable = pwater # pwater is associated with the water mass balance (fluid_component = 0 in its Kernels)
flux_function = -1E-5 # negative means a source, rather than a sink
[]
[co2_injection]
type = PorousFlowSink
boundary = left
variable = pgas # pgas is associated with the CO2 mass balance (fluid_component = 1 in its Kernels)
flux_function = -2E-5 # negative means a source, rather than a sink
[]
[right_water_component0]
type = PorousFlowOutflowBC
boundary = right
variable = pwater
mass_fraction_component = 0
save_in = water_kg_per_s
[]
[right_co2_component1]
type = PorousFlowOutflowBC
boundary = right
variable = pgas
mass_fraction_component = 1
save_in = co2_kg_per_s
[]
[]
[Preconditioning]
active = 'basic'
[basic]
type = SMP
full = true
petsc_options = '-snes_converged_reason -ksp_diagonal_scale -ksp_diagonal_scale_fix -ksp_gmres_modifiedgramschmidt'
petsc_options_iname = '-ksp_type -pc_type -sub_pc_type -sub_pc_factor_shift_type -pc_asm_overlap'
petsc_options_value = 'gmres asm lu NONZERO 2'
[]
[preferred]
type = SMP
full = true
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu mumps'
[]
[]
[Executioner]
type = Transient
solve_type = NEWTON
nl_abs_tol = 1E-10
nl_rel_tol = 1E-10
end_time = 1E5
[TimeStepper]
type = IterationAdaptiveDT
dt = 1E5
growth_factor = 1.1
[]
[]
[Postprocessors]
[water_kg_per_s]
type = NodalSum
boundary = right
variable = water_kg_per_s
[]
[co2_kg_per_s]
type = NodalSum
boundary = right
variable = co2_kg_per_s
[]
[]
[VectorPostprocessors]
[pps]
type = LineValueSampler
start_point = '0 0 0'
end_point = '20 0 0'
num_points = 20
sort_by = x
variable = 'pgas pwater saturation_gas'
[]
[]
[Outputs]
[out]
type = CSV
execute_on = final
[]
[]
(modules/porous_flow/test/tests/flux_limited_TVD_pflow/jacobian_02.i)
# Checking the Jacobian of Flux-Limited TVD Advection, 1 phase, 3 components, unsaturated, using flux_limiter_type = none
[Mesh]
type = GeneratedMesh
dim = 3
nx = 3
xmin = 0
xmax = 1
ny = 1
ymin = -1
ymax = 2
[]
[GlobalParams]
gravity = '1 2 -0.5'
PorousFlowDictator = dictator
[]
[Variables]
[pp]
[]
[tracer0]
[]
[tracer1]
[]
[]
[ICs]
[pp]
variable = pp
type = RandomIC
min = -1
max = 0
[]
[tracer0]
variable = tracer0
type = RandomIC
min = 0
max = 1
[]
[tracer1]
variable = tracer1
type = RandomIC
min = 0
max = 1
[]
[]
[Kernels]
[fluxpp]
type = PorousFlowFluxLimitedTVDAdvection
variable = pp
advective_flux_calculator = advective_flux_calculator_0
[]
[flux0]
type = PorousFlowFluxLimitedTVDAdvection
variable = tracer0
advective_flux_calculator = advective_flux_calculator_1
[]
[flux1]
type = PorousFlowFluxLimitedTVDAdvection
variable = tracer1
advective_flux_calculator = advective_flux_calculator_2
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1
density0 = 0.4
viscosity = 1.1
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp tracer0 tracer1'
number_fluid_phases = 1
number_fluid_components = 3
[]
[pc]
type = PorousFlowCapillaryPressureVG
alpha = 1
m = 0.5
[]
[advective_flux_calculator_0]
type = PorousFlowAdvectiveFluxCalculatorUnsaturatedMultiComponent
flux_limiter_type = None
fluid_component = 0
[]
[advective_flux_calculator_1]
type = PorousFlowAdvectiveFluxCalculatorUnsaturatedMultiComponent
flux_limiter_type = None
fluid_component = 1
[]
[advective_flux_calculator_2]
type = PorousFlowAdvectiveFluxCalculatorUnsaturatedMultiComponent
flux_limiter_type = None
fluid_component = 2
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'tracer0 tracer1'
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
phase = 0
n = 2
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1.21 0 0 0 1.5 0 0 0 0.8'
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
petsc_options_iname = '-snes_type'
petsc_options_value = 'test'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
end_time = 1
num_steps = 1
dt = 1
[]
(modules/porous_flow/test/tests/pressure_pulse/pressure_pulse_1d_MD.i)
# Pressure pulse in 1D with 1 phase - transient
# Using the "MD" formulation (where primary variable is log(mass-density
[Mesh]
type = GeneratedMesh
dim = 1
nx = 10
xmin = 0
xmax = 100
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[md]
# initial porepressure = 2E6
# so initial md = log(density_P0) + porepressure/bulk_modulus =
initial_condition = 6.90875527898214
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = md
[]
[flux]
type = PorousFlowAdvectiveFlux
variable = md
gravity = '0 0 0'
fluid_component = 0
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'md'
number_fluid_phases = 1
number_fluid_components = 1
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e9
density0 = 1000
thermal_expansion = 0
viscosity = 1e-3
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseMD_Gaussian
mass_density = md
al = 1E-6 # this is irrelevant in this example
density_P0 = 1000
bulk_modulus = 2E9
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-15 0 0 0 1E-15 0 0 0 1E-15'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 0
phase = 0
[]
[]
[BCs]
[left]
type = DirichletBC
boundary = left
# BC porepressure = 3E6
# so boundary md = log(density_P0) + porepressure/bulk_modulus =
value = 6.90925527898214
variable = md
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1E3
end_time = 1E4
[]
[AuxVariables]
[pp]
[]
[]
[AuxKernels]
[pp]
type = ParsedAux
expression = '(md-6.9077552789821)*2.0E9'
coupled_variables = 'md'
variable = pp
[]
[]
[Postprocessors]
[p000]
type = PointValue
variable = pp
point = '0 0 0'
execute_on = 'initial timestep_end'
[]
[p010]
type = PointValue
variable = pp
point = '10 0 0'
execute_on = 'initial timestep_end'
[]
[p020]
type = PointValue
variable = pp
point = '20 0 0'
execute_on = 'initial timestep_end'
[]
[p030]
type = PointValue
variable = pp
point = '30 0 0'
execute_on = 'initial timestep_end'
[]
[p040]
type = PointValue
variable = pp
point = '40 0 0'
execute_on = 'initial timestep_end'
[]
[p050]
type = PointValue
variable = pp
point = '50 0 0'
execute_on = 'initial timestep_end'
[]
[p060]
type = PointValue
variable = pp
point = '60 0 0'
execute_on = 'initial timestep_end'
[]
[p070]
type = PointValue
variable = pp
point = '70 0 0'
execute_on = 'initial timestep_end'
[]
[p080]
type = PointValue
variable = pp
point = '80 0 0'
execute_on = 'initial timestep_end'
[]
[p090]
type = PointValue
variable = pp
point = '90 0 0'
execute_on = 'initial timestep_end'
[]
[p100]
type = PointValue
variable = pp
point = '100 0 0'
execute_on = 'initial timestep_end'
[]
[]
[Outputs]
file_base = pressure_pulse_1d_MD
print_linear_residuals = false
csv = true
[]
(modules/porous_flow/test/tests/hysteresis/2phasePP_jac.i)
# Test of derivatives computed in PorousFlow2PhaseHysPP
[Mesh]
[mesh]
type = GeneratedMeshGenerator
dim = 1
[]
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '-1 0 0'
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
number_fluid_phases = 2
number_fluid_components = 2
porous_flow_vars = 'pp0 pp1'
[]
[]
[Variables]
[pp0]
initial_condition = 0
[]
[pp1]
initial_condition = 1
[]
[]
[Kernels]
[mass_conservation0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp0
[]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = pp0
[]
[mass_conservation1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = pp1
[]
[flux1]
type = PorousFlowAdvectiveFlux
fluid_component = 1
variable = pp1
[]
[]
[AuxVariables]
[massfrac_ph0_sp0]
initial_condition = 1
[]
[massfrac_ph1_sp0]
initial_condition = 0
[]
[]
[FluidProperties]
[simple_fluid_0]
type = SimpleFluidProperties
bulk_modulus = 10
viscosity = 1
[]
[simple_fluid_1]
type = SimpleFluidProperties
bulk_modulus = 1
viscosity = 3
[]
[]
[Materials]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[temperature]
type = PorousFlowTemperature
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph1_sp0'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid_0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid_1
phase = 1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 1 0 0 0 1'
[]
[relperm_water]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[relperm_gas]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 1
[]
[hys_order_material]
type = PorousFlowHysteresisOrder
[]
[pc_calculator]
type = PorousFlow2PhaseHysPP
alpha_d = 10.0
alpha_w = 7.0
n_d = 1.5
n_w = 1.9
S_l_min = 0.1
S_lr = 0.2
S_gr_max = 0.3
Pc_max = 12.0
high_ratio = 0.9
low_extension_type = quadratic
high_extension_type = power
phase0_porepressure = pp0
phase1_porepressure = pp1
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
petsc_options = '-snes_check_jacobian'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
(modules/porous_flow/test/tests/poroperm/PermTensorFromVar01_fv.i)
# Testing permeability calculated from scalar and tensor
# Trivial test, checking calculated permeability is correct
# k = k_anisotropy * perm
[Mesh]
[mesh]
type = GeneratedMeshGenerator
dim = 1
nx = 3
xmin = 0
xmax = 3
[]
[]
[GlobalParams]
block = 0
PorousFlowDictator = dictator
[]
[Variables]
[pp]
type = MooseVariableFVReal
[FVInitialCondition]
type = FVConstantIC
value = 0
[]
[]
[]
[FVKernels]
[flux]
type = FVPorousFlowAdvectiveFlux
gravity = '0 0 0'
variable = pp
[]
[]
[FVBCs]
[ptop]
type = FVDirichletBC
variable = pp
boundary = right
value = 0
[]
[pbase]
type = FVDirichletBC
variable = pp
boundary = left
value = 1
[]
[]
[AuxVariables]
[perm_var]
type = MooseVariableFVReal
[]
[perm_x]
type = MooseVariableFVReal
[]
[perm_y]
type = MooseVariableFVReal
[]
[perm_z]
type = MooseVariableFVReal
[]
[]
[AuxKernels]
[perm_var]
type = ConstantAux
value = 2
variable = perm_var
[]
[perm_x]
type = ADPorousFlowPropertyAux
property = permeability
variable = perm_x
row = 0
column = 0
[]
[perm_y]
type = ADPorousFlowPropertyAux
property = permeability
variable = perm_y
row = 1
column = 1
[]
[perm_z]
type = ADPorousFlowPropertyAux
property = permeability
variable = perm_z
row = 2
column = 2
[]
[]
[Postprocessors]
[perm_x_left]
type = PointValue
variable = perm_x
point = '0.5 0 0'
[]
[perm_y_left]
type = PointValue
variable = perm_y
point = '0.5 0 0'
[]
[perm_z_left]
type = PointValue
variable = perm_z
point = '0.5 0 0'
[]
[perm_x_right]
type = PointValue
variable = perm_x
point = '2.5 0 0'
[]
[perm_y_right]
type = PointValue
variable = perm_y
point = '2.5 0 0'
[]
[perm_z_right]
type = PointValue
variable = perm_z
point = '2.5 0 0'
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
# unimportant in this fully-saturated test
m = 0.8
alpha = 1e-4
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
[]
[]
[Materials]
[permeability]
type = ADPorousFlowPermeabilityTensorFromVar
k_anisotropy = '1 0 0 0 2 0 0 0 0.1'
perm = perm_var
[]
[temperature]
type = ADPorousFlowTemperature
[]
[massfrac]
type = ADPorousFlowMassFraction
[]
[eff_fluid_pressure]
type = ADPorousFlowEffectiveFluidPressure
[]
[ppss]
type = ADPorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[simple_fluid]
type = ADPorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = ADPorousFlowPorosityConst
porosity = 0.1
[]
[relperm]
type = ADPorousFlowRelativePermeabilityCorey
n = 0 # unimportant in this fully-saturated situation
phase = 0
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Steady
solve_type = Newton
l_tol = 1E-5
nl_abs_tol = 1E-3
nl_rel_tol = 1E-8
l_max_its = 200
nl_max_its = 400
[]
[Outputs]
file_base = 'PermTensorFromVar01_out'
csv = true
execute_on = 'timestep_end'
[]
(modules/porous_flow/test/tests/newton_cooling/nc02.i)
# Newton cooling from a bar. 1-phase steady
[Mesh]
type = GeneratedMesh
dim = 2
nx = 1000
ny = 1
xmin = 0
xmax = 100
ymin = 0
ymax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pressure'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.8
alpha = 1e-5
[]
[]
[Variables]
[pressure]
[]
[]
[ICs]
[pressure]
type = FunctionIC
variable = pressure
function = '(2-x/100)*1E6'
[]
[]
[Kernels]
[flux]
type = PorousFlowAdvectiveFlux
fluid_component = 0
gravity = '0 0 0'
variable = pressure
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1e6
density0 = 1000
thermal_expansion = 0
viscosity = 1e-3
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pressure
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-15 0 0 0 1E-15 0 0 0 1E-15'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey # irrelevant in this fully-saturated situation
n = 2
phase = 0
[]
[]
[BCs]
[left]
type = DirichletBC
variable = pressure
boundary = left
value = 2E6
[]
[newton]
type = PorousFlowPiecewiseLinearSink
variable = pressure
boundary = right
pt_vals = '0 100000 200000 300000 400000 500000 600000 700000 800000 900000 1000000 1100000 1200000 1300000 1400000 1500000 1600000 1700000 1800000 1900000 2000000'
multipliers = '0. 5.6677197748570516e-6 0.000011931518841831313 0.00001885408740732065 0.000026504708864284114 0.000034959953203725676 0.000044304443352900224 0.00005463170211001232 0.00006604508815181467 0.00007865883048198513 0.00009259917167338928 0.00010800563134618119 0.00012503240252705603 0.00014384989486488752 0.00016464644014777016 0.00018763017719085535 0.0002130311349595711 0.00024110353477682344 0.00027212833465544285 0.00030641604122040985 0.00034430981736352295'
use_mobility = false
use_relperm = false
fluid_phase = 0
flux_function = 1
[]
[]
[VectorPostprocessors]
[porepressure]
type = LineValueSampler
variable = pressure
start_point = '0 0.5 0'
end_point = '100 0.5 0'
sort_by = x
num_points = 20
execute_on = timestep_end
[]
[]
[Preconditioning]
active = 'andy'
[andy]
type = SMP
full = true
petsc_options = '-snes_converged_reason'
petsc_options_iname = '-ksp_type -pc_type -sub_pc_type -snes_max_it -sub_pc_factor_shift_type -pc_asm_overlap -snes_atol -snes_rtol '
petsc_options_value = 'gmres asm lu 100 NONZERO 2 1E-12 1E-15'
[]
[]
[Executioner]
type = Steady
[]
[Outputs]
file_base = nc02
execute_on = timestep_end
exodus = false
[along_line]
type = CSV
execute_vector_postprocessors_on = timestep_end
[]
[]
(modules/porous_flow/test/tests/gravity/grav01c.i)
# Checking that gravity head is established
# 1phase, vanGenuchten, constant fluid-bulk, constant viscosity, constant permeability, Corey relative perm
# unsaturated
# For better agreement with the analytical solution (ana_pp), just increase nx
[Mesh]
type = GeneratedMesh
dim = 1
nx = 100
xmin = -1
xmax = 0
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
[InitialCondition]
type = RandomIC
min = -1
max = 1
[]
[]
[]
[Kernels]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = pp
gravity = '-1 0 0'
[]
[]
[Functions]
[ana_pp]
type = ParsedFunction
symbol_names = 'g B p0 rho0'
symbol_values = '1 2 -1 1'
expression = '-B*log(exp(-p0/B)+g*rho0*x/B)' # expected pp at base
[]
[]
[BCs]
[z]
type = DirichletBC
variable = pp
boundary = right
value = -1
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2
density0 = 1
viscosity = 1
thermal_expansion = 0
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 2 0 0 0 3'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 1
phase = 0
[]
[]
[Postprocessors]
[pp_base]
type = PointValue
variable = pp
point = '-1 0 0'
[]
[pp_analytical]
type = FunctionValuePostprocessor
function = ana_pp
point = '-1 0 0'
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
[]
[]
[Executioner]
type = Steady
solve_type = Newton
[]
[Outputs]
execute_on = 'timestep_end'
file_base = grav01c
exodus = true
[csv]
type = CSV
[]
[]
(modules/porous_flow/test/tests/sinks/s08.i)
# apply a sink flux on just one component of a 3-component, 2-phase system and observe the correct behavior
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 1
xmin = 0
xmax = 1
ymin = 0
ymax = 1
zmin = 0
zmax = 2
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pwater frac_ph0_c0 pgas'
number_fluid_phases = 2
number_fluid_components = 3
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1.1
[]
[]
[Variables]
[pwater]
[]
[frac_ph0_c0]
initial_condition = 0.3
[]
[pgas]
[]
[]
[ICs]
[pwater]
type = FunctionIC
variable = pwater
function = y
[]
[pgas]
type = FunctionIC
variable = pgas
function = y+3
[]
[]
[Kernels]
[mass_c0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = frac_ph0_c0
[]
[mass_c1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = pwater
[]
[mass_c2]
type = PorousFlowMassTimeDerivative
fluid_component = 2
variable = pgas
[]
[]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 2.3
density0 = 1.5
thermal_expansion = 0
viscosity = 2.1
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 1.3
density0 = 1.1
thermal_expansion = 0
viscosity = 1.1
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePP
phase0_porepressure = pwater
phase1_porepressure = pgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'frac_ph0_c0 frac_ph0_c1 frac_ph1_c0 frac_ph1_c1'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '0.2 0 0 0 0.1 0 0 0 0.1'
[]
[relperm0]
type = PorousFlowRelativePermeabilityCorey
n = 1
phase = 0
[]
[relperm1]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 1
[]
[]
[AuxVariables]
[flux_out]
[]
[frac_ph0_c1]
initial_condition = 0.35
[]
[frac_ph1_c0]
initial_condition = 0.1
[]
[frac_ph1_c1]
initial_condition = 0.8
[]
[]
[Functions]
[mass1_00]
type = ParsedFunction
expression = 'fgas*vol*por*dens0gas*exp(pgas/bulkgas)*(1-pow(1+pow(al*(pgas-pwater),1.0/(1-m)),-m))+fwater*vol*por*dens0water*exp(pwater/bulkwater)*(pow(1+pow(al*(pgas-pwater),1.0/(1-m)),-m))'
symbol_names = 'vol por dens0gas pgas pwater bulkgas al m dens0water bulkwater fgas fwater'
symbol_values = '0.25 0.1 1.1 pgas_00 pwater_00 1.3 1.1 0.5 1.5 2.3 frac_ph1_c1_00 frac_ph0_c1_00'
[]
[expected_mass_change1_00]
type = ParsedFunction
expression = 'frac*fcn*area*dt*pow(1-pow(1+pow(al*(pgas-pwater),1.0/(1-m)),-m), 2)'
symbol_names = 'frac fcn area dt pgas pwater al m'
symbol_values = 'frac_ph1_c1_00 100 0.5 1E-3 pgas_00 pwater_00 1.1 0.5'
[]
[mass1_00_expect]
type = ParsedFunction
expression = 'mass_prev-mass_change'
symbol_names = 'mass_prev mass_change'
symbol_values = 'm1_00_prev del_m1_00'
[]
[]
[Postprocessors]
[total_mass_comp0]
type = PorousFlowFluidMass
fluid_component = 0
[]
[total_mass_comp1]
type = PorousFlowFluidMass
fluid_component = 1
[]
[total_mass_comp2]
type = PorousFlowFluidMass
fluid_component = 2
[]
[frac_ph1_c1_00]
type = PointValue
point = '0 0 0'
variable = frac_ph1_c1
execute_on = 'initial timestep_end'
[]
[frac_ph0_c1_00]
type = PointValue
point = '0 0 0'
variable = frac_ph0_c1
execute_on = 'initial timestep_end'
[]
[flux_00]
type = PointValue
point = '0 0 0'
variable = flux_out
execute_on = 'initial timestep_end'
[]
[pgas_00]
type = PointValue
point = '0 0 0'
variable = pgas
execute_on = 'initial timestep_end'
[]
[pwater_00]
type = PointValue
point = '0 0 0'
variable = pwater
execute_on = 'initial timestep_end'
[]
[m1_00]
type = FunctionValuePostprocessor
function = mass1_00
execute_on = 'initial timestep_end'
[]
[m1_00_prev]
type = FunctionValuePostprocessor
function = mass1_00
execute_on = 'timestep_begin'
outputs = 'console'
[]
[del_m1_00]
type = FunctionValuePostprocessor
function = expected_mass_change1_00
execute_on = 'timestep_end'
outputs = 'console'
[]
[m1_00_expect]
type = FunctionValuePostprocessor
function = mass1_00_expect
execute_on = 'timestep_end'
[]
[]
[BCs]
[flux_ph1_c1]
type = PorousFlowSink
boundary = 'left'
variable = pwater # sink applied to the mass_c1 Kernel
use_mobility = false
use_relperm = true
mass_fraction_component = 1
fluid_phase = 1
flux_function = 100
save_in = flux_out
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -sub_pc_type -snes_max_it -sub_pc_factor_shift_type -pc_asm_overlap'
petsc_options_value = 'gmres asm lu 100 NONZERO 2'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1E-3
end_time = 0.01
nl_rel_tol = 1E-12
nl_abs_tol = 1E-12
[]
[Outputs]
file_base = s08
exodus = true
[console]
type = Console
execute_on = 'nonlinear linear'
[]
[csv]
type = CSV
execute_on = 'timestep_end'
[]
[]
(modules/porous_flow/examples/tutorial/10.i)
# Unsaturated Darcy-Richards flow without using an Action
[Mesh]
[annular]
type = AnnularMeshGenerator
nr = 10
rmin = 1.0
rmax = 10
growth_r = 1.4
nt = 4
dmin = 0
dmax = 90
[]
[make3D]
input = annular
type = MeshExtruderGenerator
extrusion_vector = '0 0 12'
num_layers = 3
bottom_sideset = 'bottom'
top_sideset = 'top'
[]
[shift_down]
type = TransformGenerator
transform = TRANSLATE
vector_value = '0 0 -6'
input = make3D
[]
[aquifer]
type = SubdomainBoundingBoxGenerator
block_id = 1
bottom_left = '0 0 -2'
top_right = '10 10 2'
input = shift_down
[]
[injection_area]
type = ParsedGenerateSideset
combinatorial_geometry = 'x*x+y*y<1.01'
included_subdomains = 1
new_sideset_name = 'injection_area'
input = 'aquifer'
[]
[rename]
type = RenameBlockGenerator
old_block = '0 1'
new_block = 'caps aquifer'
input = 'injection_area'
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = pp
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
alpha = 1E-6
m = 0.6
[]
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
[]
[]
[Kernels]
[time_derivative]
type = PorousFlowMassTimeDerivative
variable = pp
[]
[flux]
type = PorousFlowAdvectiveFlux
variable = pp
gravity = '0 0 0'
[]
[]
[AuxVariables]
[sat]
family = MONOMIAL
order = CONSTANT
[]
[]
[AuxKernels]
[saturation]
type = PorousFlowPropertyAux
variable = sat
property = saturation
[]
[]
[BCs]
[production]
type = PorousFlowSink
variable = pp
fluid_phase = 0
flux_function = 1E-2
use_relperm = true
boundary = injection_area
[]
[]
[FluidProperties]
[the_simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2E9
viscosity = 1.0E-3
density0 = 1000.0
[]
[]
[Materials]
[porosity]
type = PorousFlowPorosity
porosity_zero = 0.1
[]
[permeability_aquifer]
type = PorousFlowPermeabilityConst
block = aquifer
permeability = '1E-14 0 0 0 1E-14 0 0 0 1E-14'
[]
[permeability_caps]
type = PorousFlowPermeabilityConst
block = caps
permeability = '1E-15 0 0 0 1E-15 0 0 0 1E-16'
[]
[saturation_calculator]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[temperature]
type = PorousFlowTemperature
temperature = 293
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = the_simple_fluid
phase = 0
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 3
s_res = 0.1
sum_s_res = 0.1
phase = 0
[]
[]
[Preconditioning]
active = basic
[basic]
type = SMP
full = true
petsc_options = '-ksp_diagonal_scale -ksp_diagonal_scale_fix'
petsc_options_iname = '-pc_type -sub_pc_type -sub_pc_factor_shift_type -pc_asm_overlap'
petsc_options_value = ' asm lu NONZERO 2'
[]
[preferred_but_might_not_be_installed]
type = SMP
full = true
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = ' lu mumps'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
end_time = 1E6
dt = 1E5
nl_abs_tol = 1E-7
[]
[Outputs]
exodus = true
[]
(modules/porous_flow/test/tests/pressure_pulse/pressure_pulse_1d_3comp.i)
# Pressure pulse in 1D with 1 phase but 3 components (viscosity, relperm, etc are independent of mass-fractions) - transient
[Mesh]
type = GeneratedMesh
dim = 1
nx = 10
xmin = 0
xmax = 100
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
initial_condition = 2E6
[]
[massfrac0]
initial_condition = 0.1
[]
[massfrac1]
initial_condition = 0.3
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
[]
[flux0]
type = PorousFlowAdvectiveFlux
variable = pp
gravity = '0 0 0'
fluid_component = 0
[]
[mass1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = massfrac0
[]
[flux1]
type = PorousFlowAdvectiveFlux
variable = massfrac0
gravity = '0 0 0'
fluid_component = 1
[]
[mass2]
type = PorousFlowMassTimeDerivative
fluid_component = 2
variable = massfrac1
[]
[flux2]
type = PorousFlowAdvectiveFlux
variable = massfrac1
gravity = '0 0 0'
fluid_component = 2
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp massfrac0 massfrac1'
number_fluid_phases = 1
number_fluid_components = 3
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1e-7
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e9
density0 = 1000
thermal_expansion = 0
viscosity = 1e-3
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac0 massfrac1'
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-15 0 0 0 1E-15 0 0 0 1E-15'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 0
phase = 0
[]
[]
[BCs]
[left]
type = DirichletBC
boundary = left
value = 3E6
variable = pp
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
petsc_options = '-snes_converged_reason -ksp_diagonal_scale -ksp_diagonal_scale_fix -ksp_gmres_modifiedgramschmidt -snes_linesearch_monitor'
petsc_options_iname = '-ksp_type -pc_type -sub_pc_type -sub_pc_factor_shift_type -pc_asm_overlap -snes_atol -snes_rtol -snes_max_it -ksp_rtol -ksp_atol'
petsc_options_value = 'gmres asm lu NONZERO 2 1E-7 1E-10 20 1E-10 1E-100'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1E3
end_time = 1E4
[]
[Postprocessors]
[p000]
type = PointValue
variable = pp
point = '0 0 0'
execute_on = 'initial timestep_end'
[]
[p010]
type = PointValue
variable = pp
point = '10 0 0'
execute_on = 'initial timestep_end'
[]
[p020]
type = PointValue
variable = pp
point = '20 0 0'
execute_on = 'initial timestep_end'
[]
[p030]
type = PointValue
variable = pp
point = '30 0 0'
execute_on = 'initial timestep_end'
[]
[p040]
type = PointValue
variable = pp
point = '40 0 0'
execute_on = 'initial timestep_end'
[]
[p050]
type = PointValue
variable = pp
point = '50 0 0'
execute_on = 'initial timestep_end'
[]
[p060]
type = PointValue
variable = pp
point = '60 0 0'
execute_on = 'initial timestep_end'
[]
[p070]
type = PointValue
variable = pp
point = '70 0 0'
execute_on = 'initial timestep_end'
[]
[p080]
type = PointValue
variable = pp
point = '80 0 0'
execute_on = 'initial timestep_end'
[]
[p090]
type = PointValue
variable = pp
point = '90 0 0'
execute_on = 'initial timestep_end'
[]
[p100]
type = PointValue
variable = pp
point = '100 0 0'
execute_on = 'initial timestep_end'
[]
[mf_0_010]
type = PointValue
variable = massfrac0
point = '10 0 0'
execute_on = 'timestep_end'
[]
[mf_1_010]
type = PointValue
variable = massfrac1
point = '10 0 0'
execute_on = 'timestep_end'
[]
[]
[Outputs]
file_base = pressure_pulse_1d_3comp
print_linear_residuals = true
csv = true
[]
(modules/porous_flow/test/tests/jacobian/basic_advection6.i)
# Basic advection with 2 porepressure as PorousFlow variables
[Mesh]
type = GeneratedMesh
dim = 1
nx = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[u]
[]
[P0]
[]
[P1]
[]
[]
[ICs]
[P0]
type = RandomIC
variable = P0
min = -1
max = 0
[]
[P1]
type = RandomIC
variable = P1
min = 0
max = 1
[]
[u]
type = RandomIC
variable = u
[]
[]
[Kernels]
[dummy_P0]
type = NullKernel
variable = P0
[]
[dummy_P1]
type = NullKernel
variable = P1
[]
[u_advection]
type = PorousFlowBasicAdvection
variable = u
phase = 0
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'P0 P1'
number_fluid_phases = 2
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
alpha = 1
m = 0.6
sat_lr = 0.1
[]
[]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 3
density0 = 4
thermal_expansion = 0
viscosity = 150.0
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 4
density0 = 3
thermal_expansion = 0
viscosity = 130.0
[]
[]
[Materials]
[temperature_qp]
type = PorousFlowTemperature
[]
[ppss_qp]
type = PorousFlow2PhasePP
phase0_porepressure = P0
phase1_porepressure = P1
capillary_pressure = pc
[]
[simple_fluid0_qp]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1_qp]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[effective_fluid_pressure]
type = PorousFlowEffectiveFluidPressure
[]
[porosity]
type = PorousFlowPorosity
porosity_zero = 0.1
fluid = true
biot_coefficient = 0.5
solid_bulk = 1
[]
[permeability]
type = PorousFlowPermeabilityKozenyCarman
poroperm_function = kozeny_carman_phi0
k0 = 5
m = 2
n = 2
phi0 = 0.1
[]
[relperm0_qp]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
s_res = 0.1
sum_s_res = 0.1
[]
[relperm1_qp]
type = PorousFlowRelativePermeabilityCorey
n = 3
phase = 1
s_res = 0.0
sum_s_res = 0.1
[]
[darcy_velocity_qp]
type = PorousFlowDarcyVelocityMaterial
gravity = '0.25 0 0'
[]
[]
[Preconditioning]
[check]
type = SMP
full = true
petsc_options = '-snes_test_display'
petsc_options_iname = '-snes_type'
petsc_options_value = ' test'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
end_time = 1
[]
(modules/porous_flow/test/tests/newton_cooling/nc06.i)
# Newton cooling from a bar. 1-phase and heat, steady
[Mesh]
type = GeneratedMesh
dim = 2
nx = 100
ny = 1
xmin = 0
xmax = 100
ymin = 0
ymax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pressure temp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.8
alpha = 1e-5
[]
[]
[Variables]
[pressure]
[]
[temp]
[]
[]
[ICs]
# have to start these reasonably close to their steady-state values
[pressure]
type = FunctionIC
variable = pressure
function = '(2-x/100)*1E6'
[]
[temperature]
type = FunctionIC
variable = temp
function = 100+0.1*x
[]
[]
[Kernels]
[flux]
type = PorousFlowAdvectiveFlux
fluid_component = 0
gravity = '0 0 0'
variable = pressure
[]
[heat_advection]
type = PorousFlowHeatAdvection
gravity = '0 0 0'
variable = temp
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1e6
density0 = 1000
thermal_expansion = 0
viscosity = 1e-3
cv = 1e6
porepressure_coefficient = 0
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = temp
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pressure
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-15 0 0 0 1E-15 0 0 0 1E-15'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey # irrelevant in this fully-saturated situation
n = 2
phase = 0
[]
[]
[BCs]
[leftp]
type = DirichletBC
variable = pressure
boundary = left
value = 2E6
[]
[leftt]
type = DirichletBC
variable = temp
boundary = left
value = 100
[]
[newtonp]
type = PorousFlowPiecewiseLinearSink
variable = pressure
boundary = right
pt_vals = '0 100000 200000 300000 400000 500000 600000 700000 800000 900000 1000000 1100000 1200000 1300000 1400000 1500000 1600000 1700000 1800000 1900000 2000000'
multipliers = '0. 5.6677197748570516e-6 0.000011931518841831313 0.00001885408740732065 0.000026504708864284114 0.000034959953203725676 0.000044304443352900224 0.00005463170211001232 0.00006604508815181467 0.00007865883048198513 0.00009259917167338928 0.00010800563134618119 0.00012503240252705603 0.00014384989486488752 0.00016464644014777016 0.00018763017719085535 0.0002130311349595711 0.00024110353477682344 0.00027212833465544285 0.00030641604122040985 0.00034430981736352295'
use_mobility = false
use_relperm = false
fluid_phase = 0
flux_function = 1
[]
[newton]
type = PorousFlowPiecewiseLinearSink
variable = temp
boundary = right
pt_vals = '0 100000 200000 300000 400000 500000 600000 700000 800000 900000 1000000 1100000 1200000 1300000 1400000 1500000 1600000 1700000 1800000 1900000 2000000'
multipliers = '0. 5.6677197748570516e-6 0.000011931518841831313 0.00001885408740732065 0.000026504708864284114 0.000034959953203725676 0.000044304443352900224 0.00005463170211001232 0.00006604508815181467 0.00007865883048198513 0.00009259917167338928 0.00010800563134618119 0.00012503240252705603 0.00014384989486488752 0.00016464644014777016 0.00018763017719085535 0.0002130311349595711 0.00024110353477682344 0.00027212833465544285 0.00030641604122040985 0.00034430981736352295'
use_mobility = false
use_relperm = false
use_internal_energy = true
fluid_phase = 0
flux_function = 1
[]
[]
[VectorPostprocessors]
[porepressure]
type = LineValueSampler
variable = pressure
start_point = '0 0.5 0'
end_point = '100 0.5 0'
sort_by = x
num_points = 11
execute_on = timestep_end
[]
[temperature]
type = LineValueSampler
variable = temp
start_point = '0 0.5 0'
end_point = '100 0.5 0'
sort_by = x
num_points = 11
execute_on = timestep_end
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
petsc_options = '-snes_converged_reason'
petsc_options_iname = '-ksp_type -pc_type -sub_pc_type -snes_max_it -sub_pc_factor_shift_type -pc_asm_overlap -snes_atol -snes_rtol '
petsc_options_value = 'gmres asm lu 100 NONZERO 2 1E-8 1E-15'
[]
[]
[Executioner]
type = Steady
solve_type = Newton
[]
[Outputs]
file_base = nc06
execute_on = timestep_end
[along_line]
type = CSV
execute_vector_postprocessors_on = timestep_end
[]
[]
(modules/porous_flow/test/tests/jacobian/basic_advection2.i)
# Basic advection with 1 porepressure as a PorousFlow variable
# Fully saturated
# Constant permeability
# Constant viscosity
[Mesh]
type = GeneratedMesh
dim = 1
nx = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[u]
[]
[P]
[]
[]
[ICs]
[P]
type = RandomIC
variable = P
[]
[u]
type = RandomIC
variable = u
[]
[]
[Kernels]
[dummy_P]
type = NullKernel
variable = P
[]
[u_advection]
type = PorousFlowBasicAdvection
variable = u
phase = 0
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = P
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
alpha = 1
m = 0.6
sat_lr = 0.1
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 3
density0 = 4
thermal_expansion = 0
viscosity = 150.0
[]
[]
[Materials]
[temperature_qp]
type = PorousFlowTemperature
[]
[ppss_qp]
type = PorousFlow1PhaseP
porepressure = P
capillary_pressure = pc
[]
[simple_fluid_qp]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '5 0 0 0 5 0 0 0 5'
[]
[relperm_qp]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
s_res = 0.1
sum_s_res = 0.1
[]
[darcy_velocity_qp]
type = PorousFlowDarcyVelocityMaterial
gravity = '0.25 0 0'
[]
[]
[Preconditioning]
[check]
type = SMP
full = true
#petsc_options = '-snes_test_display'
petsc_options_iname = '-snes_type'
petsc_options_value = ' test'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
end_time = 1
[]
(modules/porous_flow/test/tests/heat_advection/heat_advection_1d_fv.i)
# 1phase, heat advecting with a moving fluid using FV
[Mesh]
[mesh]
type = GeneratedMeshGenerator
dim = 1
nx = 50
xmin = 0
xmax = 1
[]
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[Variables]
[temp]
type = MooseVariableFVReal
[]
[pp]
type = MooseVariableFVReal
[]
[]
[FVICs]
[pp]
type = FVFunctionIC
variable = pp
function = '1-x'
[]
[temp]
type = FVFunctionIC
variable = temp
function = 'if(x<0.02, 300, 200)'
[]
[]
[FVBCs]
[pp0]
type = FVDirichletBC
variable = pp
boundary = left
value = 1
[]
[pp1]
type = FVDirichletBC
variable = pp
boundary = right
value = 0
[]
[hot]
type = FVDirichletBC
variable = temp
boundary = left
value = 300
[]
[cold]
type = FVDirichletBC
variable = temp
boundary = right
value = 200
[]
[]
[FVKernels]
[mass_dot]
type = FVPorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
[]
[advection]
type = FVPorousFlowAdvectiveFlux
fluid_component = 0
variable = pp
[]
[energy_dot]
type = FVPorousFlowEnergyTimeDerivative
variable = temp
[]
[heat_advection]
type = FVPorousFlowHeatAdvection
variable = temp
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'temp pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.6
alpha = 1.3
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 100
density0 = 1000
viscosity = 4.4
thermal_expansion = 0
cv = 2
[]
[]
[Materials]
[temperature]
type = ADPorousFlowTemperature
temperature = temp
[]
[porosity]
type = ADPorousFlowPorosityConst
porosity = 0.2
[]
[rock_heat]
type = ADPorousFlowMatrixInternalEnergy
specific_heat_capacity = 1.0
density = 125
[]
[simple_fluid]
type = ADPorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[permeability]
type = ADPorousFlowPermeabilityConst
permeability = '1.1 0 0 0 2 0 0 0 3'
[]
[relperm]
type = ADPorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[massfrac]
type = ADPorousFlowMassFraction
[]
[PS]
type = ADPorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 0.01
end_time = 0.6
[]
[VectorPostprocessors]
[T]
type = ElementValueSampler
sort_by = x
variable = 'temp'
[]
[]
[Outputs]
[csv]
type = CSV
execute_vector_postprocessors_on = final
[]
[]
(modules/porous_flow/test/tests/pressure_pulse/pressure_pulse_1d_adaptivity.i)
# Pressure pulse in 1D with 1 phase - transient simulation with a constant
# PorousFlowPorosity and mesh adaptivity with an indicator
[Mesh]
type = GeneratedMesh
dim = 1
nx = 10
xmin = 0
xmax = 100
[]
[Adaptivity]
marker = marker
[Markers]
[marker]
type = ErrorFractionMarker
indicator = front
refine = 0.5
coarsen = 0.2
[]
[]
[Indicators]
[front]
type = GradientJumpIndicator
variable = pp
[]
[]
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
initial_condition = 2E6
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
[]
[flux]
type = PorousFlowAdvectiveFlux
variable = pp
gravity = '0 0 0'
fluid_component = 0
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1e-7
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e9
density0 = 1000
thermal_expansion = 0
viscosity = 1e-3
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosity
porosity_zero = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-15 0 0 0 1E-15 0 0 0 1E-15'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 0
phase = 0
[]
[]
[BCs]
[left]
type = DirichletBC
boundary = left
preset = false
value = 3E6
variable = pp
[]
[right]
type = PorousFlowPiecewiseLinearSink
variable = pp
boundary = right
fluid_phase = 0
pt_vals = '0 1E9'
multipliers = '0 1E9'
mass_fraction_component = 0
use_mobility = true
flux_function = 1E-6
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1e3
end_time = 5e3
[]
[Postprocessors]
[p000]
type = PointValue
variable = pp
point = '0 0 0'
execute_on = 'initial timestep_end'
[]
[p010]
type = PointValue
variable = pp
point = '10 0 0'
execute_on = 'initial timestep_end'
[]
[p020]
type = PointValue
variable = pp
point = '20 0 0'
execute_on = 'initial timestep_end'
[]
[p030]
type = PointValue
variable = pp
point = '30 0 0'
execute_on = 'initial timestep_end'
[]
[p040]
type = PointValue
variable = pp
point = '40 0 0'
execute_on = 'initial timestep_end'
[]
[p050]
type = PointValue
variable = pp
point = '50 0 0'
execute_on = 'initial timestep_end'
[]
[p060]
type = PointValue
variable = pp
point = '60 0 0'
execute_on = 'initial timestep_end'
[]
[p070]
type = PointValue
variable = pp
point = '70 0 0'
execute_on = 'initial timestep_end'
[]
[p080]
type = PointValue
variable = pp
point = '80 0 0'
execute_on = 'initial timestep_end'
[]
[p090]
type = PointValue
variable = pp
point = '90 0 0'
execute_on = 'initial timestep_end'
[]
[p100]
type = PointValue
variable = pp
point = '100 0 0'
execute_on = 'initial timestep_end'
[]
[]
[Outputs]
print_linear_residuals = false
csv = true
[]
(modules/porous_flow/test/tests/dirackernels/theis1.i)
# Theis problem: Flow to single sink
# SinglePhase
# Cartesian mesh with logarithmic distribution in x and y.
[Mesh]
type = GeneratedMesh
dim = 2
nx = 20
ny = 20
bias_x = 1.1
bias_y = 1.1
ymax = 100
xmax = 100
[]
[GlobalParams]
PorousFlowDictator = dictator
compute_enthalpy = false
compute_internal_energy = false
[]
[Variables]
[pp]
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
[]
[flux]
type = PorousFlowAdvectiveFlux
variable = pp
gravity = '0 0 0'
fluid_component = 0
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1e-7
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e9
density0 = 1000
viscosity = 0.001
thermal_expansion = 0
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.2
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-14 0 0 0 1E-14 0 0 0 1E-14'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 0
phase = 0
[]
[]
[Postprocessors]
[porepressure]
type = PointValue
point = '0 0 0'
variable = pp
execute_on = 'initial timestep_end'
[]
[total_mass]
type = PorousFlowFluidMass
execute_on = 'initial timestep_end'
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 200
end_time = 1E3
nl_abs_tol = 1e-10
[]
[Outputs]
perf_graph = true
file_base = theis1
[csv]
type = CSV
execute_on = final
[]
[]
[ICs]
[PressureIC]
variable = pp
type = ConstantIC
value = 20e6
[]
[]
[DiracKernels]
[sink]
type = PorousFlowSquarePulsePointSource
end_time = 1000
point = '0 0 0'
mass_flux = -0.04
variable = pp
[]
[]
[BCs]
[right]
type = DirichletBC
variable = pp
value = 20e6
boundary = right
[]
[top]
type = DirichletBC
variable = pp
value = 20e6
boundary = top
[]
[]
[VectorPostprocessors]
[pressure]
type = SideValueSampler
variable = pp
sort_by = x
execute_on = timestep_end
boundary = bottom
[]
[]
(modules/porous_flow/test/tests/jacobian/basic_advection1.i)
# Basic advection with no PorousFlow variables
[Mesh]
type = GeneratedMesh
dim = 1
nx = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[u]
[]
[]
[AuxVariables]
[P]
[]
[]
[ICs]
[P]
type = FunctionIC
variable = P
function = '2*(1-x)'
[]
[u]
type = RandomIC
variable = u
[]
[]
[Kernels]
[u_advection]
type = PorousFlowBasicAdvection
variable = u
phase = 0
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = ''
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureConst
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e9
density0 = 4
thermal_expansion = 0
viscosity = 150.0
[]
[]
[Materials]
[temperature_qp]
type = PorousFlowTemperature
[]
[ppss_qp]
type = PorousFlow1PhaseP
porepressure = P
capillary_pressure = pc
[]
[simple_fluid_qp]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '5 0 0 0 5 0 0 0 5'
[]
[relperm_qp]
type = PorousFlowRelativePermeabilityCorey
n = 0
phase = 0
[]
[darcy_velocity_qp]
type = PorousFlowDarcyVelocityMaterial
gravity = '0.25 0 0'
[]
[]
[Preconditioning]
[check]
type = SMP
full = true
#petsc_options = '-snes_test_display'
petsc_options_iname = '-snes_type'
petsc_options_value = ' test'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
end_time = 1
[]
(modules/porous_flow/test/tests/heat_advection/heat_advection_1d.i)
# 1phase, heat advecting with a moving fluid
# Full upwinding is used
[Mesh]
type = GeneratedMesh
dim = 1
nx = 50
xmin = 0
xmax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[Variables]
[temp]
initial_condition = 200
[]
[pp]
[]
[]
[ICs]
[pp]
type = FunctionIC
variable = pp
function = '1-x'
[]
[]
[BCs]
[pp0]
type = DirichletBC
variable = pp
boundary = left
value = 1
[]
[pp1]
type = DirichletBC
variable = pp
boundary = right
value = 0
[]
[spit_heat]
type = DirichletBC
variable = temp
boundary = left
value = 300
[]
[suck_heat]
type = DirichletBC
variable = temp
boundary = right
value = 200
[]
[]
[Kernels]
[mass_dot]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
[]
[advection]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = pp
[]
[energy_dot]
type = PorousFlowEnergyTimeDerivative
variable = temp
[]
[heat_advection]
type = PorousFlowHeatAdvection
variable = temp
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'temp pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.6
alpha = 1.3
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 100
density0 = 1000
viscosity = 4.4
thermal_expansion = 0
cv = 2
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = temp
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.2
[]
[rock_heat]
type = PorousFlowMatrixInternalEnergy
specific_heat_capacity = 1.0
density = 125
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1.1 0 0 0 2 0 0 0 3'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[massfrac]
type = PorousFlowMassFraction
[]
[PS]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'gmres bjacobi 1E-15 1E-10 10000'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 0.01
end_time = 0.6
[]
[VectorPostprocessors]
[T]
type = LineValueSampler
start_point = '0 0 0'
end_point = '1 0 0'
num_points = 51
sort_by = x
variable = temp
[]
[]
[Outputs]
[csv]
type = CSV
sync_times = '0.1 0.6'
sync_only = true
[]
[]
(modules/porous_flow/test/tests/gravity/grav02b.i)
# Checking that gravity head is established in the steady-state situation when 0<saturation<1 (note the strictly less-than).
# 2phase (PP), 2components, vanGenuchten, constant fluid bulk-moduli for each phase, constant viscosity, constant permeability, Corey relative perm
# For better agreement with the analytical solution (ana_pp), just increase nx
[Mesh]
type = GeneratedMesh
dim = 1
nx = 10
xmin = -1
xmax = 0
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[ppwater]
initial_condition = -1.0
[]
[ppgas]
initial_condition = 0
[]
[]
[AuxVariables]
[massfrac_ph0_sp0]
initial_condition = 1
[]
[massfrac_ph1_sp0]
initial_condition = 0
[]
[]
[Kernels]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = ppwater
gravity = '-1 0 0'
[]
[flux1]
type = PorousFlowAdvectiveFlux
fluid_component = 1
variable = ppgas
gravity = '-1 0 0'
[]
[]
[BCs]
[ppwater]
type = DirichletBC
boundary = right
variable = ppwater
value = -1
[]
[ppgas]
type = DirichletBC
boundary = right
variable = ppgas
value = 0
[]
[]
[Functions]
[ana_ppwater]
type = ParsedFunction
symbol_names = 'g B p0 rho0'
symbol_values = '1 2 pp_water_top 1'
expression = '-B*log(exp(-p0/B)+g*rho0*x/B)' # expected pp at base
[]
[ana_ppgas]
type = ParsedFunction
symbol_names = 'g B p0 rho0'
symbol_values = '1 1 pp_gas_top 0.1'
expression = '-B*log(exp(-p0/B)+g*rho0*x/B)' # expected pp at base
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'ppwater ppgas'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 2
density0 = 1
viscosity = 1
thermal_expansion = 0
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 1
density0 = 0.1
viscosity = 0.5
thermal_expansion = 0
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePP
phase0_porepressure = ppwater
phase1_porepressure = ppgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph1_sp0'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 2 0 0 0 3'
[]
[relperm_water]
type = PorousFlowRelativePermeabilityCorey
n = 1
phase = 0
[]
[relperm_gas]
type = PorousFlowRelativePermeabilityCorey
n = 1
phase = 1
[]
[]
[Postprocessors]
[pp_water_top]
type = PointValue
variable = ppwater
point = '0 0 0'
[]
[pp_water_base]
type = PointValue
variable = ppwater
point = '-1 0 0'
[]
[pp_water_analytical]
type = FunctionValuePostprocessor
function = ana_ppwater
point = '-1 0 0'
[]
[pp_gas_top]
type = PointValue
variable = ppgas
point = '0 0 0'
[]
[pp_gas_base]
type = PointValue
variable = ppgas
point = '-1 0 0'
[]
[pp_gas_analytical]
type = FunctionValuePostprocessor
function = ana_ppgas
point = '-1 0 0'
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
[]
[]
[Executioner]
type = Steady
solve_type = Newton
[]
[Outputs]
file_base = grav02b
[csv]
type = CSV
[]
exodus = false
[]
(modules/porous_flow/test/tests/jacobian/heat_advection01.i)
# 1phase, unsaturated, heat advection
[Mesh]
type = GeneratedMesh
dim = 2
nx = 2
xmin = 0
xmax = 1
ny = 1
ymin = 0
ymax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[temp]
[]
[pp]
[]
[]
[ICs]
[temp]
type = RandomIC
variable = temp
max = 1.0
min = 0.0
[]
[pp]
type = RandomIC
variable = pp
max = 0.0
min = -1.0
[]
[]
[Kernels]
[pp]
type = TimeDerivative
variable = pp
[]
[heat_advection]
type = PorousFlowHeatAdvection
variable = temp
gravity = '1 2 3'
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'temp pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.6
alpha = 1.3
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 0.5
density0 = 1.1
thermal_expansion = 0
viscosity = 1
cv = 1.1
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = temp
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 2 0 0 0 3'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[PS]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[]
[Preconditioning]
active = check
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000'
[]
[check]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -snes_type'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000 test'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
[Outputs]
exodus = false
[]
(modules/porous_flow/test/tests/pressure_pulse/pressure_pulse_1d_2phasePS.i)
# Pressure pulse in 1D with 2 phases, 2components - transient
[Mesh]
type = GeneratedMesh
dim = 1
nx = 10
xmin = 0
xmax = 100
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[Variables]
[ppwater]
initial_condition = 2e6
[]
[sgas]
initial_condition = 0.3
[]
[]
[AuxVariables]
[massfrac_ph0_sp0]
family = MONOMIAL
order = FIRST
initial_condition = 1
[]
[massfrac_ph1_sp0]
family = MONOMIAL
order = FIRST
initial_condition = 0
[]
[ppgas]
family = MONOMIAL
order = FIRST
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = ppwater
[]
[flux0]
type = PorousFlowAdvectiveFlux
variable = ppwater
fluid_component = 0
[]
[mass1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = sgas
[]
[flux1]
type = PorousFlowAdvectiveFlux
variable = sgas
fluid_component = 1
[]
[]
[AuxKernels]
[ppgas]
type = PorousFlowPropertyAux
property = pressure
phase = 1
variable = ppgas
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'ppwater sgas'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureConst
pc = 1e5
[]
[]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 2e9
density0 = 1000
thermal_expansion = 0
viscosity = 1e-3
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 2e7
density0 = 1
thermal_expansion = 0
viscosity = 1e-5
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePS
phase0_porepressure = ppwater
phase1_saturation = sgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph1_sp0'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-15 0 0 0 1e-15 0 0 0 1e-15'
[]
[relperm_water]
type = PorousFlowRelativePermeabilityCorey
n = 1
phase = 0
[]
[relperm_gas]
type = PorousFlowRelativePermeabilityCorey
n = 1
phase = 1
[]
[]
[BCs]
[leftwater]
type = DirichletBC
boundary = left
value = 3e6
variable = ppwater
[]
[rightwater]
type = DirichletBC
boundary = right
value = 2e6
variable = ppwater
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-20 10000'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1e3
end_time = 1e4
[]
[VectorPostprocessors]
[pp]
type = LineValueSampler
warn_discontinuous_face_values = false
sort_by = x
variable = 'ppwater ppgas'
start_point = '0 0 0'
end_point = '100 0 0'
num_points = 11
[]
[]
[Outputs]
file_base = pressure_pulse_1d_2phasePS
print_linear_residuals = false
[csv]
type = CSV
execute_on = final
[]
[]
(modules/porous_flow/test/tests/basic_advection/except1.i)
# phase number is too high in PorousFlowBasicAdvection
[Mesh]
type = GeneratedMesh
dim = 1
nx = 100
xmin = 0
xmax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[u]
[]
[]
[AuxVariables]
[P]
[]
[]
[ICs]
[P]
type = FunctionIC
variable = P
function = '2*(1-x)'
[]
[u]
type = FunctionIC
variable = u
function = 'if(x<0.1,1,0)'
[]
[]
[Kernels]
[u_dot]
type = TimeDerivative
variable = u
[]
[u_advection]
type = PorousFlowBasicAdvection
variable = u
phase = 1
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = ''
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureConst
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e9
density0 = 4
thermal_expansion = 0
viscosity = 150.0
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = P
capillary_pressure = pc
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '5 0 0 0 5 0 0 0 5'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 0
phase = 0
[]
[darcy_velocity]
type = PorousFlowDarcyVelocityMaterial
gravity = '0.25 0 0'
[]
[]
[BCs]
[left]
type = DirichletBC
boundary = left
value = 1
variable = u
[]
[right]
type = DirichletBC
boundary = right
value = 0
variable = u
[]
[]
[Preconditioning]
[basic]
type = SMP
full = true
petsc_options_iname = '-pc_type -snes_rtol'
petsc_options_value = ' lu 1E-10'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 5
[]
[Outputs]
exodus = true
print_linear_residuals = false
[]
(modules/porous_flow/test/tests/flux_limited_TVD_pflow/jacobian_05.i)
# Checking the Jacobian of Flux-Limited TVD Advection, 2 phases, 2 components, using flux_limiter_type != None
#
# Here we use snes_check_jacobian instead of snes_type=test. The former just checks the Jacobian for the
# random initial conditions, while the latter checks for u=1 and u=-1
#
# The Jacobian is correct for u=1 and u=-1, but the finite-difference scheme used by snes_type=test gives the
# wrong answer.
# For u=constant, the Kuzmin-Turek scheme adds as much antidiffusion as possible, resulting in a central-difference
# version of advection (flux_limiter = 1). This is correct, and the Jacobian is calculated correctly.
# However, when computing the Jacobian using finite differences, u is increased or decreased at a node.
# This results in that node being at a maximum or minimum, which means no antidiffusion should be added
# (flux_limiter = 0). This corresponds to a full-upwind scheme. So the finite-difference computes the
# Jacobian in the full-upwind scenario, which is incorrect (the original residual = 0, after finite-differencing
# the residual comes from the full-upwind scenario).
[Mesh]
type = GeneratedMesh
dim = 1
nx = 10
xmin = 0
xmax = 5
[]
[GlobalParams]
gravity = '1.1 2 -0.5'
PorousFlowDictator = dictator
[]
[Variables]
[ppwater]
[]
[ppgas]
[]
[massfrac_ph0_sp0]
[]
[massfrac_ph1_sp0]
[]
[]
[ICs]
[ppwater]
type = FunctionIC
variable = ppwater
function = 'if(x<1,0,if(x<4,sin(x-1),1))'
[]
[ppgas]
type = FunctionIC
variable = ppgas
function = 'x*(6-x)/6'
[]
[massfrac_ph0_sp0]
type = FunctionIC
variable = massfrac_ph0_sp0
function = 'x/6'
[]
[massfrac_ph1_sp0]
type = FunctionIC
variable = massfrac_ph1_sp0
function = '1-x/7'
[]
[]
[Kernels]
[flux_ph0_sp0]
type = PorousFlowFluxLimitedTVDAdvection
variable = ppwater
advective_flux_calculator = advective_flux_calculator_ph0_sp0
[]
[flux_ph0_sp1]
type = PorousFlowFluxLimitedTVDAdvection
variable = ppgas
advective_flux_calculator = advective_flux_calculator_ph0_sp1
[]
[flux_ph1_sp0]
type = PorousFlowFluxLimitedTVDAdvection
variable = massfrac_ph0_sp0
advective_flux_calculator = advective_flux_calculator_ph1_sp0
[]
[flux_ph1_sp1]
type = PorousFlowFluxLimitedTVDAdvection
variable = massfrac_ph1_sp0
advective_flux_calculator = advective_flux_calculator_ph1_sp1
[]
[]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 1.5
density0 = 1
thermal_expansion = 0
viscosity = 1
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 0.5
density0 = 0.5
thermal_expansion = 0
viscosity = 1.4
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'ppwater ppgas massfrac_ph0_sp0 massfrac_ph1_sp0'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
alpha = 1
m = 0.5
[]
[advective_flux_calculator_ph0_sp0]
type = PorousFlowAdvectiveFluxCalculatorUnsaturatedMultiComponent
flux_limiter_type = minmod
phase = 0
fluid_component = 0
[]
[advective_flux_calculator_ph0_sp1]
type = PorousFlowAdvectiveFluxCalculatorUnsaturatedMultiComponent
flux_limiter_type = vanleer
phase = 0
fluid_component = 1
[]
[advective_flux_calculator_ph1_sp0]
type = PorousFlowAdvectiveFluxCalculatorUnsaturatedMultiComponent
flux_limiter_type = mc
phase = 1
fluid_component = 0
[]
[advective_flux_calculator_ph1_sp1]
type = PorousFlowAdvectiveFluxCalculatorUnsaturatedMultiComponent
flux_limiter_type = superbee
phase = 1
fluid_component = 1
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePP
phase0_porepressure = ppwater
phase1_porepressure = ppgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph1_sp0'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[relperm0]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[relperm1]
type = PorousFlowRelativePermeabilityCorey
n = 3
phase = 1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1.21 0 0 0 1.5 0 0 0 0.8'
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
petsc_options = '-snes_check_jacobian'
[]
[]
[Executioner]
type = Transient
solve_type = Linear # this is to force convergence even though the nonlinear residual is high: we just care about the Jacobian in this test
end_time = 1
num_steps = 1
dt = 1
[]
(modules/porous_flow/test/tests/fluidstate/waterncg.i)
# Tests correct calculation of properties in PorousFlowWaterNCG.
# This test is run three times, with the initial condition of z (the total mass
# fraction of NCG in all phases) varied to give either a single phase liquid, a
# single phase gas, or two phases.
[Mesh]
[mesh]
type = GeneratedMeshGenerator
dim = 2
[]
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pgas]
initial_condition = 1e6
[]
[z]
initial_condition = 0.005
[]
[]
[AuxVariables]
[pressure_gas]
order = CONSTANT
family = MONOMIAL
[]
[pressure_water]
order = CONSTANT
family = MONOMIAL
[]
[saturation_gas]
order = CONSTANT
family = MONOMIAL
[]
[saturation_water]
order = CONSTANT
family = MONOMIAL
[]
[density_water]
order = CONSTANT
family = MONOMIAL
[]
[density_gas]
order = CONSTANT
family = MONOMIAL
[]
[viscosity_water]
order = CONSTANT
family = MONOMIAL
[]
[viscosity_gas]
order = CONSTANT
family = MONOMIAL
[]
[enthalpy_water]
order = CONSTANT
family = MONOMIAL
[]
[enthalpy_gas]
order = CONSTANT
family = MONOMIAL
[]
[internal_energy_water]
order = CONSTANT
family = MONOMIAL
[]
[internal_energy_gas]
order = CONSTANT
family = MONOMIAL
[]
[x0_water]
order = CONSTANT
family = MONOMIAL
[]
[x0_gas]
order = CONSTANT
family = MONOMIAL
[]
[x1_water]
order = CONSTANT
family = MONOMIAL
[]
[x1_gas]
order = CONSTANT
family = MONOMIAL
[]
[]
[AuxKernels]
[pressure_water]
type = PorousFlowPropertyAux
variable = pressure_water
property = pressure
phase = 0
execute_on = timestep_end
[]
[pressure_gas]
type = PorousFlowPropertyAux
variable = pressure_gas
property = pressure
phase = 1
execute_on = timestep_end
[]
[saturation_water]
type = PorousFlowPropertyAux
variable = saturation_water
property = saturation
phase = 0
execute_on = timestep_end
[]
[saturation_gas]
type = PorousFlowPropertyAux
variable = saturation_gas
property = saturation
phase = 1
execute_on = timestep_end
[]
[density_water]
type = PorousFlowPropertyAux
variable = density_water
property = density
phase = 0
execute_on = timestep_end
[]
[density_gas]
type = PorousFlowPropertyAux
variable = density_gas
property = density
phase = 1
execute_on = timestep_end
[]
[viscosity_water]
type = PorousFlowPropertyAux
variable = viscosity_water
property = viscosity
phase = 0
execute_on = timestep_end
[]
[viscosity_gas]
type = PorousFlowPropertyAux
variable = viscosity_gas
property = viscosity
phase = 1
execute_on = timestep_end
[]
[enthalpy_water]
type = PorousFlowPropertyAux
variable = enthalpy_water
property = enthalpy
phase = 0
execute_on = timestep_end
[]
[enthalpy_gas]
type = PorousFlowPropertyAux
variable = enthalpy_gas
property = enthalpy
phase = 1
execute_on = timestep_end
[]
[internal_energy_water]
type = PorousFlowPropertyAux
variable = internal_energy_water
property = internal_energy
phase = 0
execute_on = timestep_end
[]
[internal_energy_gas]
type = PorousFlowPropertyAux
variable = internal_energy_gas
property = internal_energy
phase = 1
execute_on = timestep_end
[]
[x1_water]
type = PorousFlowPropertyAux
variable = x1_water
property = mass_fraction
phase = 0
fluid_component = 1
execute_on = timestep_end
[]
[x1_gas]
type = PorousFlowPropertyAux
variable = x1_gas
property = mass_fraction
phase = 1
fluid_component = 1
execute_on = timestep_end
[]
[x0_water]
type = PorousFlowPropertyAux
variable = x0_water
property = mass_fraction
phase = 0
fluid_component = 0
execute_on = timestep_end
[]
[x0_gas]
type = PorousFlowPropertyAux
variable = x0_gas
property = mass_fraction
phase = 1
fluid_component = 0
execute_on = timestep_end
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
variable = pgas
fluid_component = 0
[]
[mass1]
type = PorousFlowMassTimeDerivative
variable = z
fluid_component = 1
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pgas z'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureConst
pc = 0
[]
[fs]
type = PorousFlowWaterNCG
water_fp = water
gas_fp = co2
capillary_pressure = pc
[]
[]
[FluidProperties]
[co2]
type = CO2FluidProperties
[]
[water]
type = Water97FluidProperties
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = 50
[]
[waterncg]
type = PorousFlowFluidState
gas_porepressure = pgas
z = z
temperature_unit = Celsius
capillary_pressure = pc
fluid_state = fs
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-12 0 0 0 1e-12 0 0 0 1e-12'
[]
[relperm0]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[relperm1]
type = PorousFlowRelativePermeabilityCorey
n = 3
phase = 1
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[]
[Executioner]
type = Transient
solve_type = NEWTON
dt = 1
end_time = 1
nl_abs_tol = 1e-12
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Postprocessors]
[density_water]
type = ElementIntegralVariablePostprocessor
variable = density_water
[]
[density_gas]
type = ElementIntegralVariablePostprocessor
variable = density_gas
[]
[viscosity_water]
type = ElementIntegralVariablePostprocessor
variable = viscosity_water
[]
[viscosity_gas]
type = ElementIntegralVariablePostprocessor
variable = viscosity_gas
[]
[enthalpy_water]
type = ElementIntegralVariablePostprocessor
variable = enthalpy_water
[]
[enthalpy_gas]
type = ElementIntegralVariablePostprocessor
variable = enthalpy_gas
[]
[internal_energy_water]
type = ElementIntegralVariablePostprocessor
variable = internal_energy_water
[]
[internal_energy_gas]
type = ElementIntegralVariablePostprocessor
variable = internal_energy_gas
[]
[x1_water]
type = ElementIntegralVariablePostprocessor
variable = x1_water
[]
[x0_water]
type = ElementIntegralVariablePostprocessor
variable = x0_water
[]
[x1_gas]
type = ElementIntegralVariablePostprocessor
variable = x1_gas
[]
[x0_gas]
type = ElementIntegralVariablePostprocessor
variable = x0_gas
[]
[sg]
type = ElementIntegralVariablePostprocessor
variable = saturation_gas
[]
[sw]
type = ElementIntegralVariablePostprocessor
variable = saturation_water
[]
[pwater]
type = ElementIntegralVariablePostprocessor
variable = pressure_water
[]
[pgas]
type = ElementIntegralVariablePostprocessor
variable = pressure_gas
[]
[x0mass]
type = PorousFlowFluidMass
fluid_component = 0
phase = '0 1'
[]
[x1mass]
type = PorousFlowFluidMass
fluid_component = 1
phase = '0 1'
[]
[]
[Outputs]
exodus = true
file_base = waterncg_liquid
[]
(modules/porous_flow/examples/lava_lamp/2phase_convection.i)
# Two phase density-driven convection of dissolved CO2 in brine
#
# Initially, the model has a gas phase at the top with a saturation of 0.29
# (which corresponds to an initial value of zi = 0.2).
# Diffusion of the dissolved CO2
# component from the saturated liquid to the unsaturated liquid below reduces the
# amount of CO2 in the gas phase. As the density of the CO2-saturated brine is greater
# than the unsaturated brine, a gravitational instability arises and density-driven
# convection of CO2-rich fingers descend into the unsaturated brine.
#
# The instability is seeded by a random perturbation to the porosity field.
# Mesh adaptivity is used to refine the mesh as the fingers form.
#
# Note: this model is computationally expensive, so should be run with multiple cores,
# preferably on a cluster.
[GlobalParams]
PorousFlowDictator = 'dictator'
gravity = '0 -9.81 0'
[]
[Adaptivity]
max_h_level = 2
marker = marker
initial_marker = initial
initial_steps = 2
[Indicators]
[indicator]
type = GradientJumpIndicator
variable = zi
[]
[]
[Markers]
[marker]
type = ErrorFractionMarker
indicator = indicator
refine = 0.8
[]
[initial]
type = BoxMarker
bottom_left = '0 1.95 0'
top_right = '2 2 0'
inside = REFINE
outside = DO_NOTHING
[]
[]
[]
[Mesh]
type = GeneratedMesh
dim = 2
ymax = 2
xmax = 2
ny = 40
nx = 40
bias_y = 0.95
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pgas
[]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = pgas
[]
[diff0]
type = PorousFlowDispersiveFlux
fluid_component = 0
variable = pgas
disp_long = '0 0'
disp_trans = '0 0'
[]
[mass1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = zi
[]
[flux1]
type = PorousFlowAdvectiveFlux
fluid_component = 1
variable = zi
[]
[diff1]
type = PorousFlowDispersiveFlux
fluid_component = 1
variable = zi
disp_long = '0 0'
disp_trans = '0 0'
[]
[]
[AuxVariables]
[xnacl]
initial_condition = 0.01
[]
[saturation_gas]
order = FIRST
family = MONOMIAL
[]
[xco2l]
order = FIRST
family = MONOMIAL
[]
[density_liquid]
order = FIRST
family = MONOMIAL
[]
[porosity]
order = CONSTANT
family = MONOMIAL
[]
[]
[AuxKernels]
[saturation_gas]
type = PorousFlowPropertyAux
variable = saturation_gas
property = saturation
phase = 1
execute_on = 'timestep_end'
[]
[xco2l]
type = PorousFlowPropertyAux
variable = xco2l
property = mass_fraction
phase = 0
fluid_component = 1
execute_on = 'timestep_end'
[]
[density_liquid]
type = PorousFlowPropertyAux
variable = density_liquid
property = density
phase = 0
execute_on = 'timestep_end'
[]
[]
[Variables]
[pgas]
[]
[zi]
scaling = 1e4
[]
[]
[ICs]
[pressure]
type = FunctionIC
function = 10e6-9.81*1000*y
variable = pgas
[]
[zi]
type = BoundingBoxIC
variable = zi
x1 = 0
x2 = 2
y1 = 1.95
y2 = 2
inside = 0.2
outside = 0
[]
[porosity]
type = RandomIC
variable = porosity
min = 0.25
max = 0.275
seed = 0
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pgas zi'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureConst
pc = 0
[]
[fs]
type = PorousFlowBrineCO2
brine_fp = brine
co2_fp = co2
capillary_pressure = pc
[]
[]
[FluidProperties]
[co2sw]
type = CO2FluidProperties
[]
[co2]
type = TabulatedBicubicFluidProperties
fp = co2sw
[]
[brine]
type = BrineFluidProperties
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = '45'
[]
[brineco2]
type = PorousFlowFluidState
gas_porepressure = 'pgas'
z = 'zi'
temperature_unit = Celsius
xnacl = 'xnacl'
capillary_pressure = pc
fluid_state = fs
[]
[porosity]
type = PorousFlowPorosityConst
porosity = porosity
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-11 0 0 0 1e-11 0 0 0 1e-11'
[]
[relperm_water]
type = PorousFlowRelativePermeabilityCorey
phase = 0
n = 2
s_res = 0.1
sum_s_res = 0.2
[]
[relperm_gas]
type = PorousFlowRelativePermeabilityCorey
phase = 1
n = 2
s_res = 0.1
sum_s_res = 0.2
[]
[diffusivity]
type = PorousFlowDiffusivityConst
diffusion_coeff = '2e-9 2e-9 2e-9 2e-9'
tortuosity = '1 1'
[]
[]
[Preconditioning]
active = basic
[mumps_is_best_for_parallel_jobs]
type = SMP
full = true
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = ' lu mumps'
[]
[basic]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -sub_pc_type -sub_pc_factor_shift_type -pc_asm_overlap'
petsc_options_value = 'gmres asm lu NONZERO 2 '
[]
[]
[Executioner]
type = Transient
solve_type = NEWTON
end_time = 1e6
nl_max_its = 25
l_max_its = 100
dtmax = 1e4
nl_abs_tol = 1e-6
[TimeStepper]
type = IterationAdaptiveDT
dt = 10
growth_factor = 2
cutback_factor = 0.5
[]
[]
[Functions]
[flux]
type = ParsedFunction
symbol_values = 'delta_xco2 dt'
symbol_names = 'dx dt'
expression = 'dx/dt'
[]
[]
[Postprocessors]
[total_co2_in_gas]
type = PorousFlowFluidMass
phase = 1
fluid_component = 1
[]
[total_co2_in_liquid]
type = PorousFlowFluidMass
phase = 0
fluid_component = 1
[]
[numdofs]
type = NumDOFs
[]
[delta_xco2]
type = ChangeOverTimePostprocessor
postprocessor = total_co2_in_liquid
[]
[dt]
type = TimestepSize
[]
[flux]
type = FunctionValuePostprocessor
function = flux
[]
[]
[Outputs]
print_linear_residuals = false
perf_graph = true
exodus = true
csv = true
[]
(modules/porous_flow/test/tests/jacobian/pls02.i)
# PorousFlowPiecewiseLinearSink with 2-phase, 2-components
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 3
nz = 1
xmin = -1
xmax = 1
ymin = -1
ymax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[ppwater]
[]
[ppgas]
[]
[massfrac_ph0_sp0]
[]
[massfrac_ph1_sp0]
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'ppwater ppgas massfrac_ph0_sp0 massfrac_ph1_sp0'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[ICs]
[ppwater]
type = RandomIC
variable = ppwater
min = -1
max = 0
[]
[ppgas]
type = RandomIC
variable = ppgas
min = 0
max = 1
[]
[massfrac_ph0_sp0]
type = RandomIC
variable = massfrac_ph0_sp0
min = 0
max = 1
[]
[massfrac_ph1_sp0]
type = RandomIC
variable = massfrac_ph1_sp0
min = 0
max = 1
[]
[]
[Kernels]
[dummy_ppwater]
type = TimeDerivative
variable = ppwater
[]
[dummy_ppgas]
type = TimeDerivative
variable = ppgas
[]
[dummy_m00]
type = TimeDerivative
variable = massfrac_ph0_sp0
[]
[dummy_m10]
type = TimeDerivative
variable = massfrac_ph1_sp0
[]
[]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 1.5
density0 = 1
thermal_expansion = 0
viscosity = 1
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 0.5
density0 = 0.5
thermal_expansion = 0
viscosity = 1.4
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePP
phase0_porepressure = ppwater
phase1_porepressure = ppgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph1_sp0'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 2 0 0 0 3'
[]
[relperm0]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[relperm1]
type = PorousFlowRelativePermeabilityCorey
n = 3
phase = 1
[]
[]
[BCs]
[flux_w]
type = PorousFlowPiecewiseLinearSink
boundary = 'left'
pt_vals = '-1 -0.5 0'
multipliers = '1 2 4'
variable = ppwater
mass_fraction_component = 0
fluid_phase = 0
use_relperm = true
use_mobility = true
flux_function = 'x*y'
[]
[flux_g]
type = PorousFlowPiecewiseLinearSink
boundary = 'top'
pt_vals = '0 0.5 1'
multipliers = '1 -2 4'
mass_fraction_component = 0
variable = ppgas
fluid_phase = 1
use_relperm = true
use_mobility = true
flux_function = '-x*y'
[]
[flux_1]
type = PorousFlowPiecewiseLinearSink
boundary = 'right'
pt_vals = '0 0.5 1'
multipliers = '1 3 4'
mass_fraction_component = 1
variable = massfrac_ph0_sp0
fluid_phase = 0
use_relperm = true
use_mobility = true
[]
[flux_2]
type = PorousFlowPiecewiseLinearSink
boundary = 'back top'
pt_vals = '0 0.5 1'
multipliers = '0 1 -3'
mass_fraction_component = 1
variable = massfrac_ph1_sp0
fluid_phase = 1
use_relperm = true
use_mobility = true
flux_function = '0.5*x*y'
[]
[]
[Preconditioning]
[check]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -snes_type'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000 test'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 2
[]
[Outputs]
file_base = pls02
[]
(modules/porous_flow/test/tests/jacobian/fflux01.i)
# 1phase, 1component, constant viscosity, constant insitu permeability
# density with constant bulk, Corey relative perm, nonzero gravity, unsaturated with vanGenuchten
[Mesh]
type = GeneratedMesh
dim = 2
nx = 2
xmin = 0
xmax = 1
ny = 1
ymin = 0
ymax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
[]
[]
[ICs]
[pp]
type = FunctionIC
variable = pp
function = -0.7+x+y
[]
[]
[Kernels]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = pp
gravity = '-1 -0.1 0'
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1.5
density0 = 1
thermal_expansion = 0
viscosity = 1
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 2 0 0 0 3'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[]
[Preconditioning]
active = check
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000'
[]
[check]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -snes_type'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000 test'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
[Outputs]
exodus = false
[]
(modules/porous_flow/test/tests/sinks/s05.i)
# apply a half-gaussian sink flux and observe the correct behavior
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 1
xmin = 0
xmax = 1
ymin = 0
ymax = 1
zmin = 0
zmax = 2
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1.1
[]
[]
[Variables]
[pp]
[]
[]
[ICs]
[pp]
type = FunctionIC
variable = pp
function = y+1.4
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1.3
density0 = 1.1
thermal_expansion = 0
viscosity = 1.1
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-5 0 0 0 1E-5 0 0 0 1E-5'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[]
[AuxVariables]
[flux_out]
[]
[]
[Functions]
[mass10]
type = ParsedFunction
expression = 'vol*por*dens0*exp(pp/bulk)*if(pp>=0,1,pow(1+pow(-al*pp,1.0/(1-m)),-m))'
symbol_names = 'vol por dens0 pp bulk al m'
symbol_values = '0.25 0.1 1.1 p10 1.3 1.1 0.5'
[]
[rate10]
type = ParsedFunction
expression = 'if(pp>center,fcn,fcn*exp(-0.5*(pp-center)*(pp-center)/sd/sd))'
symbol_names = 'fcn pp center sd'
symbol_values = '6 p10 0.9 0.5'
[]
[mass10_expect]
type = ParsedFunction
expression = 'mass_prev-rate*area*dt'
symbol_names = 'mass_prev rate area dt'
symbol_values = 'm10_prev m10_rate 0.5 2E-3'
[]
[mass11]
type = ParsedFunction
expression = 'vol*por*dens0*exp(pp/bulk)*if(pp>=0,1,pow(1+pow(-al*pp,1.0/(1-m)),-m))'
symbol_names = 'vol por dens0 pp bulk al m'
symbol_values = '0.25 0.1 1.1 p11 1.3 1.1 0.5'
[]
[rate11]
type = ParsedFunction
expression = 'if(pp>center,fcn,fcn*exp(-0.5*(pp-center)*(pp-center)/sd/sd))'
symbol_names = 'fcn pp center sd'
symbol_values = '6 p11 0.9 0.5'
[]
[mass11_expect]
type = ParsedFunction
expression = 'mass_prev-rate*area*dt'
symbol_names = 'mass_prev rate area dt'
symbol_values = 'm11_prev m11_rate 0.5 2E-3'
[]
[]
[Postprocessors]
[flux10]
type = PointValue
variable = flux_out
point = '1 0 0'
[]
[p00]
type = PointValue
point = '0 0 0'
variable = pp
execute_on = 'initial timestep_end'
[]
[p10]
type = PointValue
point = '1 0 0'
variable = pp
execute_on = 'initial timestep_end'
[]
[m10]
type = FunctionValuePostprocessor
function = mass10
execute_on = 'initial timestep_end'
[]
[m10_prev]
type = FunctionValuePostprocessor
function = mass10
execute_on = 'timestep_begin'
outputs = 'console'
[]
[m10_rate]
type = FunctionValuePostprocessor
function = rate10
execute_on = 'timestep_end'
[]
[m10_expect]
type = FunctionValuePostprocessor
function = mass10_expect
execute_on = 'timestep_end'
[]
[p01]
type = PointValue
point = '0 1 0'
variable = pp
execute_on = 'initial timestep_end'
[]
[p11]
type = PointValue
point = '1 1 0'
variable = pp
execute_on = 'initial timestep_end'
[]
[m11]
type = FunctionValuePostprocessor
function = mass11
execute_on = 'initial timestep_end'
[]
[m11_prev]
type = FunctionValuePostprocessor
function = mass11
execute_on = 'timestep_begin'
outputs = 'console'
[]
[m11_rate]
type = FunctionValuePostprocessor
function = rate11
execute_on = 'timestep_end'
[]
[m11_expect]
type = FunctionValuePostprocessor
function = mass11_expect
execute_on = 'timestep_end'
[]
[]
[BCs]
[flux]
type = PorousFlowHalfGaussianSink
boundary = 'right'
max = 6
sd = 0.5
center = 0.9
variable = pp
use_mobility = false
use_relperm = false
fluid_phase = 0
flux_function = 1
save_in = flux_out
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -sub_pc_type -snes_max_it -sub_pc_factor_shift_type -pc_asm_overlap'
petsc_options_value = 'gmres asm lu 10000 NONZERO 2'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 2E-3
end_time = 6E-2
nl_rel_tol = 1E-12
nl_abs_tol = 1E-12
[]
[Outputs]
file_base = s05
[console]
type = Console
execute_on = 'nonlinear linear'
time_step_interval = 5
[]
[csv]
type = CSV
execute_on = 'timestep_end'
time_step_interval = 3
[]
[]
(modules/porous_flow/test/tests/gravity/grav02e_fv.i)
# Checking that gravity head is established in the transient situation when 0<=saturation<=1 (note the less-than-or-equal-to).
# 2phase (PS), 2components, constant capillary pressure, constant fluid bulk-moduli for each phase, constant viscosity,
# constant permeability, Corey relative permeabilities with no residual saturation
[Mesh]
type = GeneratedMesh
dim = 1
nx = 10
xmax = 100
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '-10 0 0'
[]
[Variables]
[ppwater]
type = MooseVariableFVReal
initial_condition = 1.5e6
[]
[sgas]
type = MooseVariableFVReal
initial_condition = 0.3
[]
[]
[AuxVariables]
[massfrac_ph0_sp0]
type = MooseVariableFVReal
initial_condition = 1
[]
[massfrac_ph1_sp0]
type = MooseVariableFVReal
initial_condition = 0
[]
[ppgas]
type = MooseVariableFVReal
[]
[swater]
type = MooseVariableFVReal
[]
[relpermwater]
type = MooseVariableFVReal
[]
[relpermgas]
type = MooseVariableFVReal
[]
[]
[FVKernels]
[mass0]
type = FVPorousFlowMassTimeDerivative
fluid_component = 0
variable = ppwater
[]
[flux0]
type = FVPorousFlowAdvectiveFlux
fluid_component = 0
variable = ppwater
[]
[mass1]
type = FVPorousFlowMassTimeDerivative
fluid_component = 1
variable = sgas
[]
[flux1]
type = FVPorousFlowAdvectiveFlux
fluid_component = 1
variable = sgas
[]
[]
[AuxKernels]
[ppgas]
type = ADPorousFlowPropertyAux
property = pressure
phase = 1
variable = ppgas
execute_on = 'initial timestep_end'
[]
[swater]
type = ADPorousFlowPropertyAux
property = saturation
phase = 0
variable = swater
execute_on = 'initial timestep_end'
[]
[relpermwater]
type = ADPorousFlowPropertyAux
property = relperm
phase = 0
variable = relpermwater
execute_on = 'initial timestep_end'
[]
[relpermgas]
type = ADPorousFlowPropertyAux
property = relperm
phase = 1
variable = relpermgas
execute_on = 'initial timestep_end'
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'ppwater sgas'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureConst
pc = 1e5
[]
[]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 2e9
density0 = 1000
viscosity = 1e-3
thermal_expansion = 0
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 2e9
density0 = 10
viscosity = 1e-5
thermal_expansion = 0
[]
[]
[Materials]
[temperature]
type = ADPorousFlowTemperature
[]
[ppss]
type = ADPorousFlow2PhasePS
phase0_porepressure = ppwater
phase1_saturation = sgas
capillary_pressure = pc
[]
[massfrac]
type = ADPorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph1_sp0'
[]
[simple_fluid0]
type = ADPorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = ADPorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[porosity]
type = ADPorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = ADPorousFlowPermeabilityConst
permeability = '1e-11 0 0 0 1e-11 0 0 0 1e-11'
[]
[relperm_water]
type = ADPorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[relperm_gas]
type = ADPorousFlowRelativePermeabilityCorey
n = 2
phase = 1
[]
[]
[VectorPostprocessors]
[vars]
type = ElementValueSampler
variable = 'ppgas ppwater sgas swater'
sort_by = x
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = Newton
end_time = 5e3
nl_abs_tol = 1e-12
[TimeStepper]
type = IterationAdaptiveDT
dt = 1e3
[]
[]
[Outputs]
execute_on = 'final'
perf_graph = true
csv = true
[]
(modules/porous_flow/test/tests/buckley_leverett/bl01.i)
# Buckley-Leverett 1-phase.
# The front starts at (around) x=5, and at t=50 it should
# have moved to x=9.6. The version below has a nonzero
# suction function, and at t=50, the front sits between
# (about) x=9.6 and x=9.9. Changing the van-Genuchten
# al parameter to 1E-4 softens the front so it sits between
# (about) x=9.7 and x=10.4, and the simulation runs much faster.
# With al=1E-2 and nx=600, the front sits between x=9.6 and x=9.8,
# but takes about 100 times longer to run.
[Mesh]
type = GeneratedMesh
dim = 1
nx = 150
xmin = 0
xmax = 15
[]
[GlobalParams]
PorousFlowDictator = dictator
compute_enthalpy = false
compute_internal_energy = false
[]
[Variables]
[pp]
[InitialCondition]
type = FunctionIC
function = 'max((1000000-x/5*1000000)-20000,-20000)'
[]
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
[]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = pp
gravity = '0 0 0'
[]
[]
[BCs]
[left]
type = DirichletBC
variable = pp
boundary = left
value = 980000
[]
[]
[AuxVariables]
[sat]
family = MONOMIAL
order = CONSTANT
[]
[]
[AuxKernels]
[sat]
type = MaterialStdVectorAux
variable = sat
execute_on = timestep_end
index = 0
property = PorousFlow_saturation_qp
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.8
alpha = 1e-3
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e6
viscosity = 1e-3
density0 = 1000
thermal_expansion = 0
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-10 0 0 0 1E-10 0 0 0 1E-10'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.15
[]
[]
[Preconditioning]
active = andy
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'gmres bjacobi 1E-10 1E-10 20'
[]
[]
[Functions]
[timestepper]
type = PiecewiseLinear
x = '0 0.01 0.1 1 1.5 2 20 30 40 50'
y = '0.01 0.1 0.2 0.3 0.1 0.3 0.3 0.4 0.4 0.5'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
end_time = 50
[TimeStepper]
type = FunctionDT
function = timestepper
[]
[]
[VectorPostprocessors]
[pp]
type = LineValueSampler
start_point = '0 0 0'
end_point = '15 0 0'
num_points = 150
sort_by = x
variable = pp
[]
[sat]
type = LineValueSampler
warn_discontinuous_face_values = false
start_point = '0 0 0'
end_point = '15 0 0'
num_points = 150
sort_by = x
variable = sat
[]
[]
[Outputs]
file_base = bl01
[csv]
type = CSV
sync_only = true
sync_times = '0.01 50'
[]
[exodus]
type = Exodus
execute_on = 'initial final'
[]
[]
(modules/porous_flow/test/tests/flux_limited_TVD_pflow/jacobian_03.i)
# Checking the Jacobian of Flux-Limited TVD Advection, 2 phases, 2 components, using flux_limiter_type = None
[Mesh]
type = GeneratedMesh
dim = 2
nx = 2
xmin = 0
xmax = 1
ny = 2
ymin = -1
ymax = 2
bias_y = 1.5
[]
[GlobalParams]
gravity = '1 2 -0.5'
PorousFlowDictator = dictator
[]
[Variables]
[ppwater]
[]
[ppgas]
[]
[massfrac_ph0_sp0]
[]
[massfrac_ph1_sp0]
[]
[]
[ICs]
[ppwater]
type = RandomIC
variable = ppwater
min = -1
max = 0
[]
[ppgas]
type = RandomIC
variable = ppgas
min = 0
max = 1
[]
[massfrac_ph0_sp0]
type = RandomIC
variable = massfrac_ph0_sp0
min = 0
max = 1
[]
[massfrac_ph1_sp0]
type = RandomIC
variable = massfrac_ph1_sp0
min = 0
max = 1
[]
[]
[Kernels]
[flux_ph0_sp0]
type = PorousFlowFluxLimitedTVDAdvection
variable = ppwater
advective_flux_calculator = advective_flux_calculator_ph0_sp0
[]
[flux_ph0_sp1]
type = PorousFlowFluxLimitedTVDAdvection
variable = ppgas
advective_flux_calculator = advective_flux_calculator_ph0_sp1
[]
[flux_ph1_sp0]
type = PorousFlowFluxLimitedTVDAdvection
variable = massfrac_ph0_sp0
advective_flux_calculator = advective_flux_calculator_ph1_sp0
[]
[flux_ph1_sp1]
type = PorousFlowFluxLimitedTVDAdvection
variable = massfrac_ph1_sp0
advective_flux_calculator = advective_flux_calculator_ph1_sp1
[]
[]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 1.5
density0 = 1
thermal_expansion = 0
viscosity = 1
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 0.5
density0 = 0.5
thermal_expansion = 0
viscosity = 1.4
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'ppwater ppgas massfrac_ph0_sp0 massfrac_ph1_sp0'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
alpha = 1
m = 0.5
[]
[advective_flux_calculator_ph0_sp0]
type = PorousFlowAdvectiveFluxCalculatorUnsaturatedMultiComponent
flux_limiter_type = None
phase = 0
fluid_component = 0
[]
[advective_flux_calculator_ph0_sp1]
type = PorousFlowAdvectiveFluxCalculatorUnsaturatedMultiComponent
flux_limiter_type = None
phase = 0
fluid_component = 1
[]
[advective_flux_calculator_ph1_sp0]
type = PorousFlowAdvectiveFluxCalculatorUnsaturatedMultiComponent
flux_limiter_type = None
phase = 1
fluid_component = 0
[]
[advective_flux_calculator_ph1_sp1]
type = PorousFlowAdvectiveFluxCalculatorUnsaturatedMultiComponent
flux_limiter_type = None
phase = 1
fluid_component = 1
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePP
phase0_porepressure = ppwater
phase1_porepressure = ppgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph1_sp0'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[relperm0]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[relperm1]
type = PorousFlowRelativePermeabilityCorey
n = 3
phase = 1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1.21 0 0 0 1.5 0 0 0 0.8'
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
petsc_options_iname = '-snes_type'
petsc_options_value = 'test'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
end_time = 1
num_steps = 1
dt = 1
[]
(modules/porous_flow/test/tests/poro_elasticity/pp_generation_unconfined.i)
# A sample is constrained on all sides, except its top
# and its boundaries are
# also impermeable. Fluid is pumped into the sample via a
# volumetric source (ie kg/second per cubic meter), and the
# rise in the top surface, porepressure, and stress are observed.
#
# In the standard poromechanics scenario, the Biot Modulus is held
# fixed and the source has units 1/time. Then the expected result
# is
# strain_zz = disp_z = BiotCoefficient*BiotModulus*s*t/((bulk + 4*shear/3) + BiotCoefficient^2*BiotModulus)
# porepressure = BiotModulus*(s*t - BiotCoefficient*strain_zz)
# stress_xx = (bulk - 2*shear/3)*strain_zz (remember this is effective stress)
# stress_zz = (bulk + 4*shear/3)*strain_zz (remember this is effective stress)
#
# In porous_flow, however, the source has units kg/s/m^3 and the
# Biot Modulus is not held fixed. This means that disp_z, porepressure,
# etc are not linear functions of t. Nevertheless, the ratios remain
# fixed:
# stress_xx/strain_zz = (bulk - 2*shear/3) = 1 (for the parameters used here)
# stress_zz/strain_zz = (bulk + 4*shear/3) = 4 (for the parameters used here)
# porepressure/strain_zz = 13.3333333 (for the parameters used here)
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 1
xmin = -0.5
xmax = 0.5
ymin = -0.5
ymax = 0.5
zmin = -0.5
zmax = 0.5
[]
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
PorousFlowDictator = dictator
block = 0
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'porepressure disp_x disp_y disp_z'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.8
alpha = 1e-5
[]
[]
[Variables]
[disp_x]
[]
[disp_y]
[]
[disp_z]
[]
[porepressure]
[]
[]
[BCs]
[confinex]
type = DirichletBC
variable = disp_x
value = 0
boundary = 'left right'
[]
[confiney]
type = DirichletBC
variable = disp_y
value = 0
boundary = 'bottom top'
[]
[confinez]
type = DirichletBC
variable = disp_z
value = 0
boundary = 'back'
[]
[]
[Kernels]
[grad_stress_x]
type = StressDivergenceTensors
variable = disp_x
component = 0
[]
[grad_stress_y]
type = StressDivergenceTensors
variable = disp_y
component = 1
[]
[grad_stress_z]
type = StressDivergenceTensors
variable = disp_z
component = 2
[]
[poro_x]
type = PorousFlowEffectiveStressCoupling
biot_coefficient = 0.3
variable = disp_x
component = 0
[]
[poro_y]
type = PorousFlowEffectiveStressCoupling
biot_coefficient = 0.3
variable = disp_y
component = 1
[]
[poro_z]
type = PorousFlowEffectiveStressCoupling
biot_coefficient = 0.3
component = 2
variable = disp_z
[]
[poro_vol_exp]
type = PorousFlowMassVolumetricExpansion
variable = porepressure
fluid_component = 0
[]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = porepressure
[]
[flux]
type = PorousFlowAdvectiveFlux
variable = porepressure
gravity = '0 0 0'
fluid_component = 0
[]
[source]
type = BodyForce
function = 0.1
variable = porepressure
[]
[]
[AuxVariables]
[stress_xx]
order = CONSTANT
family = MONOMIAL
[]
[stress_xy]
order = CONSTANT
family = MONOMIAL
[]
[stress_xz]
order = CONSTANT
family = MONOMIAL
[]
[stress_yy]
order = CONSTANT
family = MONOMIAL
[]
[stress_yz]
order = CONSTANT
family = MONOMIAL
[]
[stress_zz]
order = CONSTANT
family = MONOMIAL
[]
[]
[AuxKernels]
[stress_xx]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xx
index_i = 0
index_j = 0
[]
[stress_xy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xy
index_i = 0
index_j = 1
[]
[stress_xz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xz
index_i = 0
index_j = 2
[]
[stress_yy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yy
index_i = 1
index_j = 1
[]
[stress_yz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yz
index_i = 1
index_j = 2
[]
[stress_zz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_zz
index_i = 2
index_j = 2
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 3.3333333333
density0 = 1
thermal_expansion = 0
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[elasticity_tensor]
type = ComputeElasticityTensor
C_ijkl = '1 1.5'
# bulk modulus is lambda + 2*mu/3 = 1 + 2*1.5/3 = 2
fill_method = symmetric_isotropic
[]
[strain]
type = ComputeSmallStrain
displacements = 'disp_x disp_y disp_z'
[]
[stress]
type = ComputeLinearElasticStress
[]
[eff_fluid_pressure]
type = PorousFlowEffectiveFluidPressure
[]
[vol_strain]
type = PorousFlowVolumetricStrain
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = porepressure
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosity
fluid = true
mechanical = true
porosity_zero = 0.1
biot_coefficient = 0.3
solid_bulk = 2
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 1 0 0 0 1' # unimportant
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 0 # unimportant in this fully-saturated situation
phase = 0
[]
[]
[Postprocessors]
[p0]
type = PointValue
outputs = none
point = '0 0 0'
variable = porepressure
[]
[zdisp]
type = PointValue
outputs = none
point = '0 0 0.5'
variable = disp_z
[]
[stress_xx]
type = PointValue
outputs = none
point = '0 0 0'
variable = stress_xx
[]
[stress_yy]
type = PointValue
outputs = none
point = '0 0 0'
variable = stress_yy
[]
[stress_zz]
type = PointValue
outputs = none
point = '0 0 0'
variable = stress_zz
[]
[stress_xx_over_strain]
type = FunctionValuePostprocessor
function = stress_xx_over_strain_fcn
outputs = csv
[]
[stress_zz_over_strain]
type = FunctionValuePostprocessor
function = stress_zz_over_strain_fcn
outputs = csv
[]
[p_over_strain]
type = FunctionValuePostprocessor
function = p_over_strain_fcn
outputs = csv
[]
[]
[Functions]
[stress_xx_over_strain_fcn]
type = ParsedFunction
expression = a/b
symbol_names = 'a b'
symbol_values = 'stress_xx zdisp'
[]
[stress_zz_over_strain_fcn]
type = ParsedFunction
expression = a/b
symbol_names = 'a b'
symbol_values = 'stress_zz zdisp'
[]
[p_over_strain_fcn]
type = ParsedFunction
expression = a/b
symbol_names = 'a b'
symbol_values = 'p0 zdisp'
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'bcgs bjacobi 1E-14 1E-10 10000'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
start_time = 0
end_time = 10
dt = 1
[]
[Outputs]
execute_on = 'timestep_end'
file_base = pp_generation_unconfined
[csv]
type = CSV
[]
[]
(modules/porous_flow/test/tests/jacobian/brineco2_liquid.i)
# Tests correct calculation of properties derivatives in PorousFlowFluidState
# for conditions that give a single liquid phase
[Mesh]
type = GeneratedMesh
dim = 2
nx = 2
ny = 2
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[AuxVariables]
[xnacl]
initial_condition = 0.05
[]
[]
[Variables]
[pgas]
[]
[zi]
[]
[]
[ICs]
[pgas]
type = RandomIC
min = 5e6
max = 8e6
variable = pgas
[]
[z_liquid]
type = RandomIC
min = 0.01
max = 0.03
variable = zi
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
variable = pgas
fluid_component = 0
[]
[mass1]
type = PorousFlowMassTimeDerivative
variable = zi
fluid_component = 1
[]
[adv0]
type = PorousFlowAdvectiveFlux
variable = pgas
fluid_component = 0
[]
[adv1]
type = PorousFlowAdvectiveFlux
variable = zi
fluid_component = 1
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pgas zi'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
pc_max = 1e4
[]
[fs]
type = PorousFlowBrineCO2
brine_fp = brine
co2_fp = co2
capillary_pressure = pc
[]
[]
[FluidProperties]
[co2]
type = CO2FluidProperties
[]
[brine]
type = BrineFluidProperties
[]
[water]
type = Water97FluidProperties
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = 50
[]
[brineco2]
type = PorousFlowFluidState
gas_porepressure = pgas
z = zi
temperature_unit = Celsius
xnacl = xnacl
capillary_pressure = pc
fluid_state = fs
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-12 0 0 0 1e-12 0 0 0 1e-12'
[]
[relperm0]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[relperm1]
type = PorousFlowRelativePermeabilityCorey
n = 3
phase = 1
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[]
[Executioner]
type = Transient
solve_type = NEWTON
dt = 1
end_time = 1
nl_abs_tol = 1e-12
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[AuxVariables]
[sgas]
family = MONOMIAL
order = CONSTANT
[]
[]
[AuxKernels]
[sgas]
type = PorousFlowPropertyAux
property = saturation
phase = 1
variable = sgas
[]
[]
[Postprocessors]
[sgas_min]
type = ElementExtremeValue
variable = sgas
value_type = min
[]
[sgas_max]
type = ElementExtremeValue
variable = sgas
value_type = max
[]
[]
(modules/porous_flow/test/tests/pressure_pulse/pressure_pulse_1d_fully_saturated.i)
# Pressure pulse in 1D with 1 phase - transient
# using the PorousFlowFullySaturatedDarcyBase Kernel
[Mesh]
type = GeneratedMesh
dim = 1
nx = 20
xmin = 0
xmax = 100
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
initial_condition = 2E6
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
[]
[flux]
type = PorousFlowFullySaturatedDarcyBase
variable = pp
gravity = '0 0 0'
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e9
density0 = 1000
thermal_expansion = 0
viscosity = 1e-3
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseFullySaturated
porepressure = pp
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-15 0 0 0 1E-15 0 0 0 1E-15'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 0
phase = 0
[]
[]
[BCs]
[left]
type = DirichletBC
boundary = left
value = 3E6
variable = pp
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-20 10000'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1E3
end_time = 1E4
[]
[Postprocessors]
[p005]
type = PointValue
variable = pp
point = '5 0 0'
execute_on = 'initial timestep_end'
[]
[p015]
type = PointValue
variable = pp
point = '15 0 0'
execute_on = 'initial timestep_end'
[]
[p025]
type = PointValue
variable = pp
point = '25 0 0'
execute_on = 'initial timestep_end'
[]
[p035]
type = PointValue
variable = pp
point = '35 0 0'
execute_on = 'initial timestep_end'
[]
[p045]
type = PointValue
variable = pp
point = '45 0 0'
execute_on = 'initial timestep_end'
[]
[p055]
type = PointValue
variable = pp
point = '55 0 0'
execute_on = 'initial timestep_end'
[]
[p065]
type = PointValue
variable = pp
point = '65 0 0'
execute_on = 'initial timestep_end'
[]
[p075]
type = PointValue
variable = pp
point = '75 0 0'
execute_on = 'initial timestep_end'
[]
[p085]
type = PointValue
variable = pp
point = '85 0 0'
execute_on = 'initial timestep_end'
[]
[p095]
type = PointValue
variable = pp
point = '95 0 0'
execute_on = 'initial timestep_end'
[]
[]
[Outputs]
file_base = pressure_pulse_1d_fully_saturated
print_linear_residuals = false
csv = true
[]
(modules/porous_flow/test/tests/jacobian/brineco2_liquid_2.i)
# Tests correct calculation of properties derivatives in PorousFlowFluidState
# for conditions that give a single liquid phase, including salt as a nonlinear variable
[Mesh]
type = GeneratedMesh
dim = 2
nx = 2
ny = 2
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[Variables]
[pgas]
[]
[zi]
[]
[xnacl]
[]
[]
[ICs]
[pgas]
type = RandomIC
min = 5e6
max = 8e6
variable = pgas
[]
[z]
type = RandomIC
min = 0.01
max = 0.03
variable = zi
[]
[xnacl]
type = RandomIC
min = 0.01
max = 0.15
variable = xnacl
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
variable = pgas
fluid_component = 0
[]
[mass1]
type = PorousFlowMassTimeDerivative
variable = zi
fluid_component = 1
[]
[mass2]
type = PorousFlowMassTimeDerivative
variable = xnacl
fluid_component = 2
[]
[adv0]
type = PorousFlowAdvectiveFlux
variable = pgas
fluid_component = 0
[]
[adv1]
type = PorousFlowAdvectiveFlux
variable = zi
fluid_component = 1
[]
[adv2]
type = PorousFlowAdvectiveFlux
variable = xnacl
fluid_component = 2
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pgas zi xnacl'
number_fluid_phases = 2
number_fluid_components = 3
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
pc_max = 1e3
[]
[fs]
type = PorousFlowBrineCO2
brine_fp = brine
co2_fp = co2
capillary_pressure = pc
[]
[]
[FluidProperties]
[co2]
type = CO2FluidProperties
[]
[brine]
type = BrineFluidProperties
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = 50
[]
[brineco2]
type = PorousFlowFluidState
gas_porepressure = pgas
z = zi
temperature_unit = Celsius
xnacl = xnacl
capillary_pressure = pc
fluid_state = fs
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-12 0 0 0 1e-12 0 0 0 1e-12'
[]
[relperm0]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[relperm1]
type = PorousFlowRelativePermeabilityCorey
n = 3
phase = 1
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[]
[Executioner]
type = Transient
solve_type = NEWTON
dt = 1
end_time = 1
nl_abs_tol = 1e-12
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
(modules/porous_flow/examples/thm_example/2D_c.i)
# Two phase, temperature-dependent, with mechanics and chemistry, radial with fine mesh, constant injection of cold co2 into a overburden-reservoir-underburden containing mostly water
# species=0 is water
# species=1 is co2
# phase=0 is liquid, and since massfrac_ph0_sp0 = 1, this is all water
# phase=1 is gas, and since massfrac_ph1_sp0 = 0, this is all co2
#
# The mesh used below has very high resolution, so the simulation takes a long time to complete.
# Some suggested meshes of different resolution:
# nx=50, bias_x=1.2
# nx=100, bias_x=1.1
# nx=200, bias_x=1.05
# nx=400, bias_x=1.02
# nx=1000, bias_x=1.01
# nx=2000, bias_x=1.003
[Mesh]
type = GeneratedMesh
dim = 2
nx = 2000
bias_x = 1.003
xmin = 0.1
xmax = 5000
ny = 1
ymin = 0
ymax = 11
[]
[Problem]
coord_type = RZ
[]
[GlobalParams]
displacements = 'disp_r disp_z'
PorousFlowDictator = dictator
gravity = '0 0 0'
biot_coefficient = 1.0
[]
[Variables]
[pwater]
initial_condition = 18.3e6
[]
[sgas]
initial_condition = 0.0
[]
[temp]
initial_condition = 358
[]
[disp_r]
[]
[]
[AuxVariables]
[rate]
[]
[disp_z]
[]
[massfrac_ph0_sp0]
initial_condition = 1 # all H20 in phase=0
[]
[massfrac_ph1_sp0]
initial_condition = 0 # no H2O in phase=1
[]
[pgas]
family = MONOMIAL
order = FIRST
[]
[swater]
family = MONOMIAL
order = FIRST
[]
[stress_rr]
order = CONSTANT
family = MONOMIAL
[]
[stress_tt]
order = CONSTANT
family = MONOMIAL
[]
[stress_zz]
order = CONSTANT
family = MONOMIAL
[]
[mineral_conc_m3_per_m3]
family = MONOMIAL
order = CONSTANT
initial_condition = 0.1
[]
[eqm_const]
initial_condition = 0.0
[]
[porosity]
family = MONOMIAL
order = CONSTANT
[]
[]
[Kernels]
[mass_water_dot]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pwater
[]
[flux_water]
type = PorousFlowAdvectiveFlux
fluid_component = 0
use_displaced_mesh = false
variable = pwater
[]
[mass_co2_dot]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = sgas
[]
[flux_co2]
type = PorousFlowAdvectiveFlux
fluid_component = 1
use_displaced_mesh = false
variable = sgas
[]
[energy_dot]
type = PorousFlowEnergyTimeDerivative
variable = temp
[]
[advection]
type = PorousFlowHeatAdvection
use_displaced_mesh = false
variable = temp
[]
[conduction]
type = PorousFlowExponentialDecay
use_displaced_mesh = false
variable = temp
reference = 358
rate = rate
[]
[grad_stress_r]
type = StressDivergenceRZTensors
temperature = temp
eigenstrain_names = thermal_contribution
variable = disp_r
use_displaced_mesh = false
component = 0
[]
[poro_r]
type = PorousFlowEffectiveStressCoupling
variable = disp_r
use_displaced_mesh = false
component = 0
[]
[]
[AuxKernels]
[rate]
type = FunctionAux
variable = rate
execute_on = timestep_begin
function = decay_rate
[]
[pgas]
type = PorousFlowPropertyAux
property = pressure
phase = 1
variable = pgas
[]
[swater]
type = PorousFlowPropertyAux
property = saturation
phase = 0
variable = swater
[]
[stress_rr]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_rr
index_i = 0
index_j = 0
[]
[stress_tt]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_tt
index_i = 2
index_j = 2
[]
[stress_zz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_zz
index_i = 1
index_j = 1
[]
[mineral]
type = PorousFlowPropertyAux
property = mineral_concentration
mineral_species = 0
variable = mineral_conc_m3_per_m3
[]
[eqm_const_auxk]
type = ParsedAux
variable = eqm_const
coupled_variables = temp
expression = '(358 - temp) / (358 - 294)'
[]
[porosity_auxk]
type = PorousFlowPropertyAux
property = porosity
variable = porosity
[]
[]
[Functions]
[decay_rate]
# Eqn(26) of the first paper of LaForce et al.
# Ka * (rho C)_a = 10056886.914
# h = 11
type = ParsedFunction
expression = 'sqrt(10056886.914/t)/11.0'
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'temp pwater sgas disp_r'
number_fluid_phases = 2
number_fluid_components = 2
number_aqueous_kinetic = 1
aqueous_phase_number = 1
[]
[pc]
type = PorousFlowCapillaryPressureConst
pc = 0
[]
[]
[FluidProperties]
[water]
type = SimpleFluidProperties
bulk_modulus = 2.27e14
density0 = 970.0
viscosity = 0.3394e-3
cv = 4149.0
cp = 4149.0
porepressure_coefficient = 0.0
thermal_expansion = 0
[]
[co2]
type = SimpleFluidProperties
bulk_modulus = 2.27e14
density0 = 516.48
viscosity = 0.0393e-3
cv = 2920.5
cp = 2920.5
porepressure_coefficient = 0.0
thermal_expansion = 0
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = temp
[]
[ppss]
type = PorousFlow2PhasePS
phase0_porepressure = pwater
phase1_saturation = sgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph1_sp0'
[]
[water]
type = PorousFlowSingleComponentFluid
fp = water
phase = 0
[]
[gas]
type = PorousFlowSingleComponentFluid
fp = co2
phase = 1
[]
[porosity_reservoir]
type = PorousFlowPorosity
porosity_zero = 0.2
chemical = true
reference_chemistry = 0.1
initial_mineral_concentrations = 0.1
[]
[permeability_reservoir]
type = PorousFlowPermeabilityConst
permeability = '2e-12 0 0 0 0 0 0 0 0'
[]
[relperm_liquid]
type = PorousFlowRelativePermeabilityCorey
n = 4
phase = 0
s_res = 0.200
sum_s_res = 0.405
[]
[relperm_gas]
type = PorousFlowRelativePermeabilityBC
phase = 1
s_res = 0.205
sum_s_res = 0.405
nw_phase = true
lambda = 2
[]
[thermal_conductivity_reservoir]
type = PorousFlowThermalConductivityIdeal
dry_thermal_conductivity = '0 0 0 0 1.320 0 0 0 0'
wet_thermal_conductivity = '0 0 0 0 3.083 0 0 0 0'
[]
[internal_energy_reservoir]
type = PorousFlowMatrixInternalEnergy
specific_heat_capacity = 1100
density = 2350.0
[]
[elasticity_tensor]
type = ComputeIsotropicElasticityTensor
shear_modulus = 6.0E9
poissons_ratio = 0.2
[]
[strain]
type = ComputeAxisymmetricRZSmallStrain
eigenstrain_names = 'thermal_contribution ini_stress'
[]
[ini_strain]
type = ComputeEigenstrainFromInitialStress
initial_stress = '-12.8E6 0 0 0 -51.3E6 0 0 0 -12.8E6'
eigenstrain_name = ini_stress
[]
[thermal_contribution]
type = ComputeThermalExpansionEigenstrain
temperature = temp
stress_free_temperature = 358
thermal_expansion_coeff = 5E-6
eigenstrain_name = thermal_contribution
[]
[stress]
type = ComputeLinearElasticStress
[]
[eff_fluid_pressure]
type = PorousFlowEffectiveFluidPressure
[]
[vol_strain]
type = PorousFlowVolumetricStrain
[]
[predis]
type = PorousFlowAqueousPreDisChemistry
num_reactions = 1
primary_concentrations = 1.0 # fixed activity
equilibrium_constants_as_log10 = true
equilibrium_constants = eqm_const
primary_activity_coefficients = 1.0 # fixed activity
reactions = 1
kinetic_rate_constant = 1E-6
molar_volume = 1.0
specific_reactive_surface_area = 1.0
activation_energy = 0.0 # no Arrhenius
[]
[mineral_conc]
type = PorousFlowAqueousPreDisMineral
initial_concentrations = 0.1
[]
[predis_nodes]
type = PorousFlowAqueousPreDisChemistry
at_nodes = true
num_reactions = 1
primary_concentrations = 1.0 # fixed activity
equilibrium_constants_as_log10 = true
equilibrium_constants = eqm_const
primary_activity_coefficients = 1.0 # fixed activity
reactions = 1
kinetic_rate_constant = 1E-6
molar_volume = 1.0
specific_reactive_surface_area = 1.0
activation_energy = 0.0 # no Arrhenius
[]
[mineral_conc_nodes]
type = PorousFlowAqueousPreDisMineral
at_nodes = true
initial_concentrations = 0.1
[]
[]
[BCs]
[outer_pressure_fixed]
type = DirichletBC
boundary = right
value = 18.3e6
variable = pwater
[]
[outer_saturation_fixed]
type = DirichletBC
boundary = right
value = 0.0
variable = sgas
[]
[outer_temp_fixed]
type = DirichletBC
boundary = right
value = 358
variable = temp
[]
[fixed_outer_r]
type = DirichletBC
variable = disp_r
value = 0
boundary = right
[]
[co2_injection]
type = PorousFlowSink
boundary = left
variable = sgas
use_mobility = false
use_relperm = false
fluid_phase = 1
flux_function = 'min(t/100.0,1)*(-2.294001475)' # 5.0E5 T/year = 15.855 kg/s, over area of 2Pi*0.1*11
[]
[cold_co2]
type = DirichletBC
boundary = left
variable = temp
value = 294
[]
[cavity_pressure_x]
type = Pressure
boundary = left
variable = disp_r
component = 0
postprocessor = p_bh # note, this lags
use_displaced_mesh = false
[]
[]
[Postprocessors]
[p_bh]
type = PointValue
variable = pwater
point = '0.1 0 0'
execute_on = timestep_begin
use_displaced_mesh = false
[]
[mineral_bh] # mineral concentration (m^3(mineral)/m^3(rock)) at the borehole
type = PointValue
variable = mineral_conc_m3_per_m3
point = '0.1 0 0'
use_displaced_mesh = false
[]
[]
[VectorPostprocessors]
[ptsuss]
type = LineValueSampler
use_displaced_mesh = false
start_point = '0.1 0 0'
end_point = '5000 0 0'
sort_by = x
num_points = 50000
outputs = csv
variable = 'pwater temp sgas disp_r stress_rr stress_tt mineral_conc_m3_per_m3 porosity'
[]
[]
[Preconditioning]
active = 'smp'
[smp]
type = SMP
full = true
#petsc_options = '-snes_converged_reason -ksp_diagonal_scale -ksp_diagonal_scale_fix -ksp_gmres_modifiedgramschmidt -snes_linesearch_monitor'
petsc_options_iname = '-ksp_type -pc_type -sub_pc_type -sub_pc_factor_shift_type -pc_asm_overlap -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'gmres asm lu NONZERO 2 1E2 1E-5 50'
[]
[mumps]
type = SMP
full = true
petsc_options = '-snes_converged_reason -ksp_diagonal_scale -ksp_diagonal_scale_fix -ksp_gmres_modifiedgramschmidt -snes_linesearch_monitor'
petsc_options_iname = '-ksp_type -pc_type -pc_factor_mat_solver_package -pc_factor_shift_type -snes_rtol -snes_atol -snes_max_it'
petsc_options_value = 'gmres lu mumps NONZERO 1E-5 1E2 50'
[]
[]
[Executioner]
type = Transient
solve_type = NEWTON
end_time = 1.5768e8
#dtmax = 1e6
[TimeStepper]
type = IterationAdaptiveDT
dt = 1
growth_factor = 1.1
[]
[]
[Outputs]
print_linear_residuals = false
sync_times = '3600 86400 2.592E6 1.5768E8'
perf_graph = true
exodus = true
[csv]
type = CSV
sync_only = true
[]
[]
(modules/porous_flow/test/tests/newton_cooling/nc01.i)
# Newton cooling from a bar. 1-phase transient
[Mesh]
type = GeneratedMesh
dim = 2
nx = 1000
ny = 1
xmin = 0
xmax = 100
ymin = 0
ymax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pressure'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.8
alpha = 1e-5
[]
[]
[Variables]
[pressure]
initial_condition = 2E6
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pressure
[]
[flux]
type = PorousFlowAdvectiveFlux
fluid_component = 0
gravity = '0 0 0'
variable = pressure
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1e6
density0 = 1000
thermal_expansion = 0
viscosity = 1e-3
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pressure
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-15 0 0 0 1E-15 0 0 0 1E-15'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey # irrelevant in this fully-saturated situation
n = 2
phase = 0
[]
[]
[BCs]
[left]
type = DirichletBC
variable = pressure
boundary = left
value = 2E6
[]
[newton]
type = PorousFlowPiecewiseLinearSink
variable = pressure
boundary = right
pt_vals = '0 100000 200000 300000 400000 500000 600000 700000 800000 900000 1000000 1100000 1200000 1300000 1400000 1500000 1600000 1700000 1800000 1900000 2000000'
multipliers = '0. 5.6677197748570516e-6 0.000011931518841831313 0.00001885408740732065 0.000026504708864284114 0.000034959953203725676 0.000044304443352900224 0.00005463170211001232 0.00006604508815181467 0.00007865883048198513 0.00009259917167338928 0.00010800563134618119 0.00012503240252705603 0.00014384989486488752 0.00016464644014777016 0.00018763017719085535 0.0002130311349595711 0.00024110353477682344 0.00027212833465544285 0.00030641604122040985 0.00034430981736352295'
use_mobility = false
use_relperm = false
fluid_phase = 0
flux_function = 1
[]
[]
[VectorPostprocessors]
[porepressure]
type = LineValueSampler
variable = pressure
start_point = '0 0.5 0'
end_point = '100 0.5 0'
sort_by = x
num_points = 20
execute_on = timestep_end
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
petsc_options = '-snes_converged_reason'
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'bcgs bjacobi 1E-12 1E-15 10000'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
end_time = 1E8
dt = 1E6
[]
[Outputs]
file_base = nc01
[along_line]
type = CSV
execute_vector_postprocessors_on = final
[]
[]
(modules/porous_flow/test/tests/dirackernels/bh_except14.i)
# fully-saturated
# production
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 1
xmin = -1
xmax = 1
ymin = -1
ymax = 1
zmin = -1
zmax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
initial_condition = 1E7
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[borehole_total_outflow_mass]
type = PorousFlowSumQuantity
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1e-7
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e9
viscosity = 1e-3
density0 = 1000
thermal_expansion = 0
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-12 0 0 0 1E-12 0 0 0 1E-12'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[]
[DiracKernels]
[bh]
type = PorousFlowPeacemanBorehole
bottom_p_or_t = 0
fluid_phase = 0
point_file = bh02_huge.bh
SumQuantityUO = borehole_total_outflow_mass
variable = pp
unit_weight = '0 0 0'
character = 1
[]
[]
[Postprocessors]
[bh_report]
type = PorousFlowPlotQuantity
uo = borehole_total_outflow_mass
[]
[fluid_mass0]
type = PorousFlowFluidMass
execute_on = timestep_begin
[]
[fluid_mass1]
type = PorousFlowFluidMass
execute_on = timestep_end
[]
[zmass_error]
type = FunctionValuePostprocessor
function = mass_bal_fcn
execute_on = timestep_end
[]
[p0]
type = PointValue
variable = pp
point = '0 0 0'
execute_on = timestep_end
[]
[]
[Functions]
[mass_bal_fcn]
type = ParsedFunction
expression = abs((a-c+d)/2/(a+c))
symbol_names = 'a c d'
symbol_values = 'fluid_mass1 fluid_mass0 bh_report'
[]
[]
[Preconditioning]
[usual]
type = SMP
full = true
petsc_options = '-snes_converged_reason'
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -ksp_max_it'
petsc_options_value = 'bcgs bjacobi 1E-10 1E-10 10000 30'
[]
[]
[Executioner]
type = Transient
end_time = 0.5
dt = 1E-2
solve_type = NEWTON
[]
(modules/porous_flow/test/tests/jacobian/waterncg_twophase_nonisothermal.i)
# Tests correct calculation of properties derivatives in PorousFlowWaterNCG
# for nonisothermal two phase conditions
[Mesh]
[mesh]
type = GeneratedMeshGenerator
dim = 2
nx = 2
ny = 2
[]
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[Variables]
[pgas]
[]
[z]
[]
[temperature]
[]
[]
[ICs]
[pgas]
type = RandomIC
min = 1e5
max = 5e5
variable = pgas
[]
[z]
type = RandomIC
min = 0.01
max = 0.06
variable = z
[]
[temperature]
type = RandomIC
min = 20
max = 80
variable = temperature
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
variable = pgas
fluid_component = 0
[]
[mass1]
type = PorousFlowMassTimeDerivative
variable = z
fluid_component = 1
[]
[adv0]
type = PorousFlowAdvectiveFlux
variable = pgas
fluid_component = 0
[]
[adv1]
type = PorousFlowAdvectiveFlux
variable = z
fluid_component = 1
[]
[energy]
type = PorousFlowEnergyTimeDerivative
variable = temperature
[]
[heat]
type = PorousFlowHeatAdvection
variable = temperature
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pgas z temperature'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1e1
pc_max = 1e4
[]
[fs]
type = PorousFlowWaterNCG
water_fp = water
gas_fp = co2
capillary_pressure = pc
[]
[]
[FluidProperties]
[co2]
type = CO2FluidProperties
[]
[water]
type = Water97FluidProperties
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = temperature
[]
[waterncg]
type = PorousFlowFluidState
gas_porepressure = pgas
z = z
temperature = temperature
temperature_unit = Celsius
capillary_pressure = pc
fluid_state = fs
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-12 0 0 0 1e-12 0 0 0 1e-12'
[]
[relperm0]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[relperm1]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 1
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[rock_heat]
type = PorousFlowMatrixInternalEnergy
specific_heat_capacity = 1000
density = 2500
[]
[]
[Executioner]
type = Transient
solve_type = NEWTON
dt = 1
end_time = 1
nl_abs_tol = 1e-12
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[AuxVariables]
[sgas]
family = MONOMIAL
order = CONSTANT
[]
[]
[AuxKernels]
[sgas]
type = PorousFlowPropertyAux
property = saturation
phase = 1
variable = sgas
[]
[]
[Postprocessors]
[sgas_min]
type = ElementExtremeValue
variable = sgas
value_type = min
[]
[sgas_max]
type = ElementExtremeValue
variable = sgas
value_type = max
[]
[]
(modules/porous_flow/test/tests/dirackernels/bh_except02.i)
# PorousFlowPeacemanBorehole exception test
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 1
xmin = -1
xmax = 1
ymin = -1
ymax = 1
zmin = -1
zmax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
initial_condition = 1E7
[]
[]
[Kernels]
[mass0]
type = TimeDerivative
variable = pp
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[borehole_total_outflow_mass]
type = PorousFlowSumQuantity
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1e-7
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e9
viscosity = 1e-3
density0 = 1000
thermal_expansion = 0
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-12 0 0 0 1E-12 0 0 0 1E-12'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[]
[DiracKernels]
[bh]
type = PorousFlowPeacemanBorehole
bottom_p_or_t = 0
fluid_phase = 0
mass_fraction_component = 1
point_file = bh02.bh
SumQuantityUO = borehole_total_outflow_mass
variable = pp
unit_weight = '0 0 0'
character = 1
[]
[]
[Postprocessors]
[bh_report]
type = PorousFlowPlotQuantity
uo = borehole_total_outflow_mass
[]
[fluid_mass0]
type = PorousFlowFluidMass
execute_on = timestep_begin
[]
[fluid_mass1]
type = PorousFlowFluidMass
execute_on = timestep_end
[]
[zmass_error]
type = FunctionValuePostprocessor
function = mass_bal_fcn
execute_on = timestep_end
[]
[p0]
type = PointValue
variable = pp
point = '0 0 0'
execute_on = timestep_end
[]
[]
[Functions]
[mass_bal_fcn]
type = ParsedFunction
expression = abs((a-c+d)/2/(a+c))
symbol_names = 'a c d'
symbol_values = 'fluid_mass1 fluid_mass0 bh_report'
[]
[]
[Preconditioning]
[usual]
type = SMP
full = true
petsc_options = '-snes_converged_reason'
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -ksp_max_it'
petsc_options_value = 'bcgs bjacobi 1E-10 1E-10 10000 30'
[]
[]
[Executioner]
type = Transient
end_time = 0.5
dt = 1E-2
solve_type = NEWTON
[]
(modules/porous_flow/test/tests/aux_kernels/properties.i)
# Example of accessing properties using the PorousFlowPropertyAux AuxKernel for
# each phase and fluid component (as required).
[Mesh]
type = GeneratedMesh
dim = 2
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[Variables]
[pwater]
initial_condition = 1e6
[]
[sgas]
initial_condition = 0.3
[]
[temperature]
initial_condition = 50
[]
[]
[AuxVariables]
[x0_water]
order = FIRST
family = LAGRANGE
initial_condition = 0.1
[]
[x0_gas]
order = FIRST
family = LAGRANGE
initial_condition = 0.8
[]
[pressure_gas]
order = CONSTANT
family = MONOMIAL
[]
[capillary_pressure]
order = CONSTANT
family = MONOMIAL
[]
[saturation_water]
order = CONSTANT
family = MONOMIAL
[]
[density_water]
order = CONSTANT
family = MONOMIAL
[]
[density_gas]
order = CONSTANT
family = MONOMIAL
[]
[viscosity_water]
order = CONSTANT
family = MONOMIAL
[]
[viscosity_gas]
order = CONSTANT
family = MONOMIAL
[]
[x1_water]
order = CONSTANT
family = MONOMIAL
[]
[x1_gas]
order = CONSTANT
family = MONOMIAL
[]
[relperm_water]
order = CONSTANT
family = MONOMIAL
[]
[relperm_gas]
order = CONSTANT
family = MONOMIAL
[]
[enthalpy_water]
order = CONSTANT
family = MONOMIAL
[]
[enthalpy_gas]
order = CONSTANT
family = MONOMIAL
[]
[energy_water]
order = CONSTANT
family = MONOMIAL
[]
[energy_gas]
order = CONSTANT
family = MONOMIAL
[]
[]
[AuxKernels]
[pressure_gas]
type = PorousFlowPropertyAux
variable = pressure_gas
property = pressure
phase = 1
execute_on = timestep_end
[]
[capillary_pressure]
type = PorousFlowPropertyAux
variable = capillary_pressure
property = capillary_pressure
execute_on = timestep_end
[]
[saturation_water]
type = PorousFlowPropertyAux
variable = saturation_water
property = saturation
phase = 0
execute_on = timestep_end
[]
[density_water]
type = PorousFlowPropertyAux
variable = density_water
property = density
phase = 0
execute_on = timestep_end
[]
[density_gas]
type = PorousFlowPropertyAux
variable = density_gas
property = density
phase = 1
execute_on = timestep_end
[]
[viscosity_water]
type = PorousFlowPropertyAux
variable = viscosity_water
property = viscosity
phase = 0
execute_on = timestep_end
[]
[viscosity_gas]
type = PorousFlowPropertyAux
variable = viscosity_gas
property = viscosity
phase = 1
execute_on = timestep_end
[]
[relperm_water]
type = PorousFlowPropertyAux
variable = relperm_water
property = relperm
phase = 0
execute_on = timestep_end
[]
[relperm_gas]
type = PorousFlowPropertyAux
variable = relperm_gas
property = relperm
phase = 1
execute_on = timestep_end
[]
[x1_water]
type = PorousFlowPropertyAux
variable = x1_water
property = mass_fraction
phase = 0
fluid_component = 1
execute_on = timestep_end
[]
[x1_gas]
type = PorousFlowPropertyAux
variable = x1_gas
property = mass_fraction
phase = 1
fluid_component = 1
execute_on = timestep_end
[]
[enthalpy_water]
type = PorousFlowPropertyAux
variable = enthalpy_water
property = enthalpy
phase = 0
execute_on = timestep_end
[]
[enthalpy_gas]
type = PorousFlowPropertyAux
variable = enthalpy_gas
property = enthalpy
phase = 1
execute_on = timestep_end
[]
[energy_water]
type = PorousFlowPropertyAux
variable = energy_water
property = internal_energy
phase = 0
execute_on = timestep_end
[]
[energy_gas]
type = PorousFlowPropertyAux
variable = energy_gas
property = internal_energy
phase = 1
execute_on = timestep_end
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pwater
[]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = pwater
[]
[mass1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = sgas
[]
[flux1]
type = PorousFlowAdvectiveFlux
fluid_component = 1
variable = sgas
[]
[energy_dot]
type = PorousFlowEnergyTimeDerivative
variable = temperature
[]
[heat_advection]
type = PorousFlowHeatAdvection
variable = temperature
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pwater sgas temperature'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1e-5
pc_max = 1e7
sat_lr = 0.1
[]
[]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 1e9
viscosity = 1e-3
density0 = 1000
thermal_expansion = 0
cv = 2
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 1e9
viscosity = 1e-4
density0 = 20
thermal_expansion = 0
cv = 1
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = temperature
[]
[ppss]
type = PorousFlow2PhasePS
phase0_porepressure = pwater
phase1_saturation = sgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'x0_water x0_gas'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-12 0 0 0 1e-12 0 0 0 1e-12'
[]
[relperm0]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[relperm1]
type = PorousFlowRelativePermeabilityCorey
n = 3
phase = 1
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[rock_heat]
type = PorousFlowMatrixInternalEnergy
specific_heat_capacity = 1.0
density = 125
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
nl_abs_tol = 1e-12
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Outputs]
exodus = true
[]
(modules/porous_flow/test/tests/poro_elasticity/terzaghi.i)
# Terzaghi's problem of consolodation of a drained medium
#
# A saturated soil sample sits in a bath of water.
# It is constrained on its sides, and bottom.
# Its sides and bottom are also impermeable.
# Initially it is unstressed.
# A normal stress, q, is applied to the soil's top.
# The soil then slowly compresses as water is squeezed
# out from the sample from its top (the top BC for
# the porepressure is porepressure = 0).
#
# See, for example. Section 2.2 of the online manuscript
# Arnold Verruijt "Theory and Problems of Poroelasticity" Delft University of Technology 2013
# but note that the "sigma" in that paper is the negative
# of the stress in TensorMechanics
#
# Here are the problem's parameters, and their values:
# Soil height. h = 10
# Soil's Lame lambda. la = 2
# Soil's Lame mu, which is also the Soil's shear modulus. mu = 3
# Soil bulk modulus. K = la + 2*mu/3 = 4
# Soil confined compressibility. m = 1/(K + 4mu/3) = 0.125
# Soil bulk compliance. 1/K = 0.25
# Fluid bulk modulus. Kf = 8
# Fluid bulk compliance. 1/Kf = 0.125
# Fluid mobility (soil permeability/fluid viscosity). k = 1.5
# Soil initial porosity. phi0 = 0.1
# Biot coefficient. alpha = 0.6
# Soil initial storativity, which is the reciprocal of the initial Biot modulus. S = phi0/Kf + (alpha - phi0)(1 - alpha)/K = 0.0625
# Consolidation coefficient. c = k/(S + alpha^2 m) = 13.95348837
# Normal stress on top. q = 1
# Initial porepressure, resulting from instantaneous application of q, assuming corresponding instantaneous increase of porepressure (Note that this is calculated by MOOSE: we only need it for the analytical solution). p0 = alpha*m*q/(S + alpha^2 m) = 0.69767442
# Initial vertical displacement (down is positive), resulting from instantaneous application of q (Note this is calculated by MOOSE: we only need it for the analytical solution). uz0 = q*m*h*S/(S + alpha^2 m)
# Final vertical displacement (down in positive) (Note this is calculated by MOOSE: we only need it for the analytical solution). uzinf = q*m*h
#
# The solution for porepressure is
# P = 4*p0/\pi \sum_{k=1}^{\infty} \frac{(-1)^{k-1}}{2k-1} \cos ((2k-1)\pi z/(2h)) \exp(-(2k-1)^2 \pi^2 ct/(4 h^2))
# This series converges very slowly for ct/h^2 small, so in that domain
# P = p0 erf( (1-(z/h))/(2 \sqrt(ct/h^2)) )
#
# The degree of consolidation is defined as
# U = (uz - uz0)/(uzinf - uz0)
# where uz0 and uzinf are defined above, and
# uz = the vertical displacement of the top (down is positive)
# U = 1 - (8/\pi^2)\sum_{k=1}^{\infty} \frac{1}{(2k-1)^2} \exp(-(2k-1)^2 \pi^2 ct/(4 h^2))
#
# FINAL NOTE: The above solution assumes constant Biot Modulus.
# In porous_flow this is not true. Therefore the solution is
# a little different than in the paper. This test was therefore
# validated against MOOSE's poromechanics, which can choose either
# a constant Biot Modulus (which has been shown to agree with
# the analytic solution), or a non-constant Biot Modulus (which
# gives the same results as porous_flow).
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 10
xmin = -1
xmax = 1
ymin = -1
ymax = 1
zmin = 0
zmax = 10
[]
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
PorousFlowDictator = dictator
block = 0
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'porepressure disp_x disp_y disp_z'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.8
alpha = 1
[]
[]
[Variables]
[disp_x]
[]
[disp_y]
[]
[disp_z]
[]
[porepressure]
[]
[]
[BCs]
[confinex]
type = DirichletBC
variable = disp_x
value = 0
boundary = 'left right'
[]
[confiney]
type = DirichletBC
variable = disp_y
value = 0
boundary = 'bottom top'
[]
[basefixed]
type = DirichletBC
variable = disp_z
value = 0
boundary = back
[]
[topdrained]
type = DirichletBC
variable = porepressure
value = 0
boundary = front
[]
[topload]
type = NeumannBC
variable = disp_z
value = -1
boundary = front
[]
[]
[Kernels]
[grad_stress_x]
type = StressDivergenceTensors
variable = disp_x
component = 0
[]
[grad_stress_y]
type = StressDivergenceTensors
variable = disp_y
component = 1
[]
[grad_stress_z]
type = StressDivergenceTensors
variable = disp_z
component = 2
[]
[poro_x]
type = PorousFlowEffectiveStressCoupling
biot_coefficient = 0.6
variable = disp_x
component = 0
[]
[poro_y]
type = PorousFlowEffectiveStressCoupling
biot_coefficient = 0.6
variable = disp_y
component = 1
[]
[poro_z]
type = PorousFlowEffectiveStressCoupling
biot_coefficient = 0.6
component = 2
variable = disp_z
[]
[poro_vol_exp]
type = PorousFlowMassVolumetricExpansion
variable = porepressure
fluid_component = 0
[]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = porepressure
[]
[flux]
type = PorousFlowAdvectiveFlux
variable = porepressure
gravity = '0 0 0'
fluid_component = 0
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 8
density0 = 1
thermal_expansion = 0
viscosity = 0.96
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[elasticity_tensor]
type = ComputeElasticityTensor
C_ijkl = '2 3'
# bulk modulus is lambda + 2*mu/3 = 2 + 2*3/3 = 4
fill_method = symmetric_isotropic
[]
[strain]
type = ComputeSmallStrain
[]
[stress]
type = ComputeLinearElasticStress
[]
[eff_fluid_pressure_qp]
type = PorousFlowEffectiveFluidPressure
[]
[vol_strain]
type = PorousFlowVolumetricStrain
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = porepressure
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosity
fluid = true
mechanical = true
ensure_positive = false
porosity_zero = 0.1
biot_coefficient = 0.6
solid_bulk = 4
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1.5 0 0 0 1.5 0 0 0 1.5'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 0 # unimportant in this fully-saturated situation
phase = 0
[]
[]
[Postprocessors]
[p0]
type = PointValue
outputs = csv
point = '0 0 0'
variable = porepressure
use_displaced_mesh = false
[]
[p1]
type = PointValue
outputs = csv
point = '0 0 1'
variable = porepressure
use_displaced_mesh = false
[]
[p2]
type = PointValue
outputs = csv
point = '0 0 2'
variable = porepressure
use_displaced_mesh = false
[]
[p3]
type = PointValue
outputs = csv
point = '0 0 3'
variable = porepressure
use_displaced_mesh = false
[]
[p4]
type = PointValue
outputs = csv
point = '0 0 4'
variable = porepressure
use_displaced_mesh = false
[]
[p5]
type = PointValue
outputs = csv
point = '0 0 5'
variable = porepressure
use_displaced_mesh = false
[]
[p6]
type = PointValue
outputs = csv
point = '0 0 6'
variable = porepressure
use_displaced_mesh = false
[]
[p7]
type = PointValue
outputs = csv
point = '0 0 7'
variable = porepressure
use_displaced_mesh = false
[]
[p8]
type = PointValue
outputs = csv
point = '0 0 8'
variable = porepressure
use_displaced_mesh = false
[]
[p9]
type = PointValue
outputs = csv
point = '0 0 9'
variable = porepressure
use_displaced_mesh = false
[]
[p99]
type = PointValue
outputs = csv
point = '0 0 10'
variable = porepressure
use_displaced_mesh = false
[]
[zdisp]
type = PointValue
outputs = csv
point = '0 0 10'
variable = disp_z
use_displaced_mesh = false
[]
[dt]
type = FunctionValuePostprocessor
outputs = console
function = if(0.5*t<0.1,0.5*t,0.1)
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = Newton
start_time = 0
end_time = 10
[TimeStepper]
type = PostprocessorDT
postprocessor = dt
dt = 0.0001
[]
[]
[Outputs]
execute_on = 'timestep_end'
file_base = terzaghi
[csv]
type = CSV
[]
[]
(modules/porous_flow/test/tests/dirackernels/bh_except04.i)
# PorousFlowPeacemanBorehole exception test
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 1
xmin = -1
xmax = 1
ymin = -1
ymax = 1
zmin = -1
zmax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
initial_condition = 1E7
[]
[]
[Kernels]
[mass0]
type = TimeDerivative
variable = pp
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[borehole_total_outflow_mass]
type = PorousFlowSumQuantity
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1e-7
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e9
viscosity = 1e-3
density0 = 1000
thermal_expansion = 0
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
at_nodes = true # Needed to force exepected error
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-12 0 0 0 1E-12 0 0 0 1E-12'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[]
[DiracKernels]
[bh]
type = PorousFlowPeacemanBorehole
bottom_p_or_t = 0
fluid_phase = 0
function_of = temperature
point_file = bh02.bh
SumQuantityUO = borehole_total_outflow_mass
variable = pp
unit_weight = '0 0 0'
character = 1
[]
[]
[Postprocessors]
[bh_report]
type = PorousFlowPlotQuantity
uo = borehole_total_outflow_mass
[]
[fluid_mass0]
type = PorousFlowFluidMass
execute_on = timestep_begin
[]
[fluid_mass1]
type = PorousFlowFluidMass
execute_on = timestep_end
[]
[zmass_error]
type = FunctionValuePostprocessor
function = mass_bal_fcn
execute_on = timestep_end
[]
[p0]
type = PointValue
variable = pp
point = '0 0 0'
execute_on = timestep_end
[]
[]
[Functions]
[mass_bal_fcn]
type = ParsedFunction
expression = abs((a-c+d)/2/(a+c))
symbol_names = 'a c d'
symbol_values = 'fluid_mass1 fluid_mass0 bh_report'
[]
[]
[Preconditioning]
[usual]
type = SMP
full = true
petsc_options = '-snes_converged_reason'
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -ksp_max_it'
petsc_options_value = 'bcgs bjacobi 1E-10 1E-10 10000 30'
[]
[]
[Executioner]
type = Transient
end_time = 0.5
dt = 1E-2
solve_type = NEWTON
[]
(modules/porous_flow/test/tests/fluidstate/brineco2_fv.i)
# Tests correct calculation of properties in PorousFlowBrineCO2 using FV variables
[Mesh]
[mesh]
type = GeneratedMeshGenerator
dim = 2
[]
[]
[GlobalParams]
PorousFlowDictator = dictator
temperature = 30
[]
[Variables]
[pg]
type = MooseVariableFVReal
initial_condition = 20e6
[]
[z]
type = MooseVariableFVReal
initial_condition = 0.2
[]
[]
[AuxVariables]
[xnacl]
type = MooseVariableFVReal
initial_condition = 0.1
[]
[pressure_gas]
type = MooseVariableFVReal
[]
[pressure_water]
type = MooseVariableFVReal
[]
[saturation_gas]
type = MooseVariableFVReal
[]
[saturation_water]
type = MooseVariableFVReal
[]
[density_water]
type = MooseVariableFVReal
[]
[density_gas]
type = MooseVariableFVReal
[]
[viscosity_water]
type = MooseVariableFVReal
[]
[viscosity_gas]
type = MooseVariableFVReal
[]
[enthalpy_water]
type = MooseVariableFVReal
[]
[enthalpy_gas]
type = MooseVariableFVReal
[]
[internal_energy_water]
type = MooseVariableFVReal
[]
[internal_energy_gas]
type = MooseVariableFVReal
[]
[x0_water]
type = MooseVariableFVReal
[]
[x0_gas]
type = MooseVariableFVReal
[]
[x1_water]
type = MooseVariableFVReal
[]
[x1_gas]
type = MooseVariableFVReal
[]
[]
[AuxKernels]
[pressure_water]
type = ADPorousFlowPropertyAux
variable = pressure_water
property = pressure
phase = 0
execute_on = 'timestep_end'
[]
[pressure_gas]
type = ADPorousFlowPropertyAux
variable = pressure_gas
property = pressure
phase = 1
execute_on = 'timestep_end'
[]
[saturation_water]
type = ADPorousFlowPropertyAux
variable = saturation_water
property = saturation
phase = 0
execute_on = 'timestep_end'
[]
[saturation_gas]
type = ADPorousFlowPropertyAux
variable = saturation_gas
property = saturation
phase = 1
execute_on = 'timestep_end'
[]
[density_water]
type = ADPorousFlowPropertyAux
variable = density_water
property = density
phase = 0
execute_on = 'timestep_end'
[]
[density_gas]
type = ADPorousFlowPropertyAux
variable = density_gas
property = density
phase = 1
execute_on = 'timestep_end'
[]
[viscosity_water]
type = ADPorousFlowPropertyAux
variable = viscosity_water
property = viscosity
phase = 0
execute_on = 'timestep_end'
[]
[viscosity_gas]
type = ADPorousFlowPropertyAux
variable = viscosity_gas
property = viscosity
phase = 1
execute_on = 'timestep_end'
[]
[enthalpy_water]
type = ADPorousFlowPropertyAux
variable = enthalpy_water
property = enthalpy
phase = 0
execute_on = 'timestep_end'
[]
[enthalpy_gas]
type = ADPorousFlowPropertyAux
variable = enthalpy_gas
property = enthalpy
phase = 1
execute_on = 'timestep_end'
[]
[internal_energy_water]
type = ADPorousFlowPropertyAux
variable = internal_energy_water
property = internal_energy
phase = 0
execute_on = 'timestep_end'
[]
[internal_energy_gas]
type = ADPorousFlowPropertyAux
variable = internal_energy_gas
property = internal_energy
phase = 1
execute_on = 'timestep_end'
[]
[x1_water]
type = ADPorousFlowPropertyAux
variable = x1_water
property = mass_fraction
phase = 0
fluid_component = 1
execute_on = 'timestep_end'
[]
[x1_gas]
type = ADPorousFlowPropertyAux
variable = x1_gas
property = mass_fraction
phase = 1
fluid_component = 1
execute_on = 'timestep_end'
[]
[x0_water]
type = ADPorousFlowPropertyAux
variable = x0_water
property = mass_fraction
phase = 0
fluid_component = 0
execute_on = 'timestep_end'
[]
[x0_gas]
type = ADPorousFlowPropertyAux
variable = x0_gas
property = mass_fraction
phase = 1
fluid_component = 0
execute_on = 'timestep_end'
[]
[]
[FVKernels]
[mass0]
type = FVPorousFlowMassTimeDerivative
variable = pg
fluid_component = 0
[]
[mass1]
type = FVPorousFlowMassTimeDerivative
variable = z
fluid_component = 1
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pg z'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureConst
pc = 0
[]
[fs]
type = PorousFlowBrineCO2
brine_fp = brine
co2_fp = co2
capillary_pressure = pc
[]
[]
[FluidProperties]
[co2]
type = CO2FluidProperties
[]
[brine]
type = BrineFluidProperties
[]
[]
[Materials]
[temperature]
type = ADPorousFlowTemperature
[]
[brineco2]
type = ADPorousFlowFluidState
gas_porepressure = pg
z = z
temperature_unit = Celsius
xnacl = xnacl
capillary_pressure = pc
fluid_state = fs
[]
[permeability]
type = ADPorousFlowPermeabilityConst
permeability = '1e-12 0 0 0 1e-12 0 0 0 1e-12'
[]
[relperm0]
type = ADPorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[relperm1]
type = ADPorousFlowRelativePermeabilityCorey
n = 3
phase = 1
[]
[porosity]
type = ADPorousFlowPorosityConst
porosity = 0.1
[]
[]
[Executioner]
type = Transient
solve_type = NEWTON
dt = 1
end_time = 1
nl_abs_tol = 1e-12
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Postprocessors]
[density_water]
type = ElementIntegralVariablePostprocessor
variable = density_water
execute_on = 'timestep_end'
[]
[density_gas]
type = ElementIntegralVariablePostprocessor
variable = density_gas
execute_on = 'timestep_end'
[]
[viscosity_water]
type = ElementIntegralVariablePostprocessor
variable = viscosity_water
execute_on = 'timestep_end'
[]
[viscosity_gas]
type = ElementIntegralVariablePostprocessor
variable = viscosity_gas
execute_on = 'timestep_end'
[]
[enthalpy_water]
type = ElementIntegralVariablePostprocessor
variable = enthalpy_water
execute_on = 'timestep_end'
[]
[enthalpy_gas]
type = ElementIntegralVariablePostprocessor
variable = enthalpy_gas
execute_on = 'timestep_end'
[]
[internal_energy_water]
type = ElementIntegralVariablePostprocessor
variable = internal_energy_water
execute_on = 'timestep_end'
[]
[internal_energy_gas]
type = ElementIntegralVariablePostprocessor
variable = internal_energy_gas
execute_on = 'timestep_end'
[]
[x1_water]
type = ElementIntegralVariablePostprocessor
variable = x1_water
execute_on = 'timestep_end'
[]
[x0_water]
type = ElementIntegralVariablePostprocessor
variable = x0_water
execute_on = 'timestep_end'
[]
[x1_gas]
type = ElementIntegralVariablePostprocessor
variable = x1_gas
execute_on = 'timestep_end'
[]
[x0_gas]
type = ElementIntegralVariablePostprocessor
variable = x0_gas
execute_on = 'timestep_end'
[]
[sg]
type = ElementIntegralVariablePostprocessor
variable = saturation_gas
execute_on = 'timestep_end'
[]
[sw]
type = ElementIntegralVariablePostprocessor
variable = saturation_water
execute_on = 'timestep_end'
[]
[pwater]
type = ElementIntegralVariablePostprocessor
variable = pressure_water
execute_on = 'timestep_end'
[]
[pgas]
type = ElementIntegralVariablePostprocessor
variable = pressure_gas
execute_on = 'timestep_end'
[]
[x0mass]
type = FVPorousFlowFluidMass
fluid_component = 0
phase = '0 1'
[]
[x1mass]
type = FVPorousFlowFluidMass
fluid_component = 1
phase = '0 1'
[]
[]
[Outputs]
csv = true
file_base = brineco2
execute_on = 'timestep_end'
perf_graph = false
[]
(modules/porous_flow/test/tests/fluidstate/waterncg_nonisothermal.i)
[Mesh]
[mesh]
type = GeneratedMeshGenerator
dim = 2
[]
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pgas]
initial_condition = 1e6
[]
[z]
initial_condition = 0.25
[]
[temperature]
initial_condition = 70
[]
[]
[AuxVariables]
[pressure_gas]
order = CONSTANT
family = MONOMIAL
[]
[pressure_water]
order = CONSTANT
family = MONOMIAL
[]
[saturation_gas]
order = CONSTANT
family = MONOMIAL
[]
[saturation_water]
order = CONSTANT
family = MONOMIAL
[]
[density_water]
order = CONSTANT
family = MONOMIAL
[]
[density_gas]
order = CONSTANT
family = MONOMIAL
[]
[viscosity_water]
order = CONSTANT
family = MONOMIAL
[]
[viscosity_gas]
order = CONSTANT
family = MONOMIAL
[]
[enthalpy_water]
order = CONSTANT
family = MONOMIAL
[]
[enthalpy_gas]
order = CONSTANT
family = MONOMIAL
[]
[internal_energy_water]
order = CONSTANT
family = MONOMIAL
[]
[internal_energy_gas]
order = CONSTANT
family = MONOMIAL
[]
[x0_water]
order = CONSTANT
family = MONOMIAL
[]
[x0_gas]
order = CONSTANT
family = MONOMIAL
[]
[x1_water]
order = CONSTANT
family = MONOMIAL
[]
[x1_gas]
order = CONSTANT
family = MONOMIAL
[]
[]
[AuxKernels]
[pressure_water]
type = PorousFlowPropertyAux
variable = pressure_water
property = pressure
phase = 0
execute_on = timestep_end
[]
[pressure_gas]
type = PorousFlowPropertyAux
variable = pressure_gas
property = pressure
phase = 1
execute_on = timestep_end
[]
[saturation_water]
type = PorousFlowPropertyAux
variable = saturation_water
property = saturation
phase = 0
execute_on = timestep_end
[]
[saturation_gas]
type = PorousFlowPropertyAux
variable = saturation_gas
property = saturation
phase = 1
execute_on = timestep_end
[]
[density_water]
type = PorousFlowPropertyAux
variable = density_water
property = density
phase = 0
execute_on = timestep_end
[]
[density_gas]
type = PorousFlowPropertyAux
variable = density_gas
property = density
phase = 1
execute_on = timestep_end
[]
[viscosity_water]
type = PorousFlowPropertyAux
variable = viscosity_water
property = viscosity
phase = 0
execute_on = timestep_end
[]
[viscosity_gas]
type = PorousFlowPropertyAux
variable = viscosity_gas
property = viscosity
phase = 1
execute_on = timestep_end
[]
[enthalpy_water]
type = PorousFlowPropertyAux
variable = enthalpy_water
property = enthalpy
phase = 0
execute_on = timestep_end
[]
[enthalpy_gas]
type = PorousFlowPropertyAux
variable = enthalpy_gas
property = enthalpy
phase = 1
execute_on = timestep_end
[]
[internal_energy_water]
type = PorousFlowPropertyAux
variable = internal_energy_water
property = internal_energy
phase = 0
execute_on = timestep_end
[]
[internal_energy_gas]
type = PorousFlowPropertyAux
variable = internal_energy_gas
property = internal_energy
phase = 1
execute_on = timestep_end
[]
[x1_water]
type = PorousFlowPropertyAux
variable = x1_water
property = mass_fraction
phase = 0
fluid_component = 1
execute_on = timestep_end
[]
[x1_gas]
type = PorousFlowPropertyAux
variable = x1_gas
property = mass_fraction
phase = 1
fluid_component = 1
execute_on = timestep_end
[]
[x0_water]
type = PorousFlowPropertyAux
variable = x0_water
property = mass_fraction
phase = 0
fluid_component = 0
execute_on = timestep_end
[]
[x0_gas]
type = PorousFlowPropertyAux
variable = x0_gas
property = mass_fraction
phase = 1
fluid_component = 0
execute_on = timestep_end
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
variable = pgas
fluid_component = 0
[]
[mass1]
type = PorousFlowMassTimeDerivative
variable = z
fluid_component = 1
[]
[heat]
type = TimeDerivative
variable = temperature
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pgas z '
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureConst
pc = 0
[]
[fs]
type = PorousFlowWaterNCG
water_fp = water
gas_fp = co2
capillary_pressure = pc
[]
[]
[FluidProperties]
[co2]
type = CO2FluidProperties
[]
[water]
type = Water97FluidProperties
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = temperature
[]
[waterncg]
type = PorousFlowFluidState
gas_porepressure = pgas
z = z
temperature = temperature
temperature_unit = Celsius
capillary_pressure = pc
fluid_state = fs
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-12 0 0 0 1e-12 0 0 0 1e-12'
[]
[relperm0]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[relperm1]
type = PorousFlowRelativePermeabilityCorey
n = 3
phase = 1
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[]
[Executioner]
type = Transient
solve_type = NEWTON
dt = 1
end_time = 1
nl_abs_tol = 1e-12
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Postprocessors]
[density_water]
type = ElementIntegralVariablePostprocessor
variable = density_water
[]
[density_gas]
type = ElementIntegralVariablePostprocessor
variable = density_gas
[]
[viscosity_water]
type = ElementIntegralVariablePostprocessor
variable = viscosity_water
[]
[viscosity_gas]
type = ElementIntegralVariablePostprocessor
variable = viscosity_gas
[]
[enthalpy_water]
type = ElementIntegralVariablePostprocessor
variable = enthalpy_water
[]
[enthalpy_gas]
type = ElementIntegralVariablePostprocessor
variable = enthalpy_gas
[]
[internal_energy_water]
type = ElementIntegralVariablePostprocessor
variable = internal_energy_water
[]
[internal_energy_gas]
type = ElementIntegralVariablePostprocessor
variable = internal_energy_gas
[]
[x0_water]
type = ElementIntegralVariablePostprocessor
variable = x0_water
[]
[x1_gas]
type = ElementIntegralVariablePostprocessor
variable = x1_gas
[]
[x0_gas]
type = ElementIntegralVariablePostprocessor
variable = x0_gas
[]
[sg]
type = ElementIntegralVariablePostprocessor
variable = saturation_gas
[]
[sw]
type = ElementIntegralVariablePostprocessor
variable = saturation_water
[]
[pwater]
type = ElementIntegralVariablePostprocessor
variable = pressure_water
[]
[pgas]
type = ElementIntegralVariablePostprocessor
variable = pressure_gas
[]
[x0mass]
type = PorousFlowFluidMass
fluid_component = 0
phase = '0 1'
[]
[x1mass]
type = PorousFlowFluidMass
fluid_component = 1
phase = '0 1'
[]
[]
[Outputs]
csv = true
execute_on = timestep_end
[]
(modules/porous_flow/test/tests/heat_advection/heat_advection_1d_fullsat.i)
# 1phase, heat advecting with a moving fluid
# Full upwinding is used, as implemented by the PorousFlowFullySaturatedUpwindHeatAdvection added
# In this case, the results should be identical to the case when the PorousFlowHeatAdvection Kernel is used.
[Mesh]
type = GeneratedMesh
dim = 1
nx = 50
xmin = 0
xmax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[Variables]
[temp]
initial_condition = 200
[]
[pp]
[]
[]
[ICs]
[pp]
type = FunctionIC
variable = pp
function = '1-x'
[]
[]
[BCs]
[pp0]
type = DirichletBC
variable = pp
boundary = left
value = 1
[]
[pp1]
type = DirichletBC
variable = pp
boundary = right
value = 0
[]
[spit_heat]
type = DirichletBC
variable = temp
boundary = left
value = 300
[]
[suck_heat]
type = DirichletBC
variable = temp
boundary = right
value = 200
[]
[]
[Kernels]
[mass_dot]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
[]
[advection]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = pp
[]
[energy_dot]
type = PorousFlowEnergyTimeDerivative
variable = temp
[]
[heat_advection]
type = PorousFlowFullySaturatedUpwindHeatAdvection
variable = temp
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'temp pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.6
alpha = 1.3
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 100
density0 = 1000
viscosity = 4.4
thermal_expansion = 0
cv = 2
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = temp
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.2
[]
[rock_heat]
type = PorousFlowMatrixInternalEnergy
specific_heat_capacity = 1.0
density = 125
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1.1 0 0 0 2 0 0 0 3'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[massfrac]
type = PorousFlowMassFraction
[]
[PS]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'gmres bjacobi 1E-15 1E-10 10000'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 0.01
end_time = 0.6
[]
[VectorPostprocessors]
[T]
type = LineValueSampler
start_point = '0 0 0'
end_point = '1 0 0'
num_points = 51
sort_by = x
variable = temp
[]
[]
[Outputs]
[csv]
type = CSV
sync_times = '0.1 0.6'
sync_only = true
[]
[]
(modules/porous_flow/test/tests/infiltration_and_drainage/rsc02.i)
# RSC test with low-res time and spatial resolution
[Mesh]
type = GeneratedMesh
dim = 2
nx = 200
ny = 1
xmin = 0
xmax = 10 # x is the depth variable, called zeta in RSC
ymin = 0
ymax = 0.05
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[Functions]
[dts]
type = PiecewiseLinear
y = '3E-2 5E-1 8E-1'
x = '0 1 5'
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pwater poil'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureRSC
oil_viscosity = 2E-3
scale_ratio = 2E3
shift = 10
[]
[]
[FluidProperties]
[water]
type = SimpleFluidProperties
bulk_modulus = 2e9
density0 = 10
thermal_expansion = 0
viscosity = 1e-3
[]
[oil]
type = SimpleFluidProperties
bulk_modulus = 2e9
density0 = 20
thermal_expansion = 0
viscosity = 2e-3
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePP
phase0_porepressure = pwater
phase1_porepressure = poil
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph1_sp0'
[]
[water]
type = PorousFlowSingleComponentFluid
fp = water
phase = 0
compute_enthalpy = false
compute_internal_energy = false
[]
[oil]
type = PorousFlowSingleComponentFluid
fp = oil
phase = 1
compute_enthalpy = false
compute_internal_energy = false
[]
[relperm_water]
type = PorousFlowRelativePermeabilityCorey
n = 1
phase = 0
[]
[relperm_oil]
type = PorousFlowRelativePermeabilityCorey
n = 1
phase = 1
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.25
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-5 0 0 0 1E-5 0 0 0 1E-5'
[]
[]
[Variables]
[pwater]
[]
[poil]
[]
[]
[ICs]
[water_init]
type = ConstantIC
variable = pwater
value = 0
[]
[oil_init]
type = ConstantIC
variable = poil
value = 15
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pwater
[]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = pwater
[]
[mass1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = poil
[]
[flux1]
type = PorousFlowAdvectiveFlux
fluid_component = 1
variable = poil
[]
[]
[AuxVariables]
[SWater]
family = MONOMIAL
order = CONSTANT
[]
[SOil]
family = MONOMIAL
order = CONSTANT
[]
[massfrac_ph0_sp0]
initial_condition = 1
[]
[massfrac_ph1_sp0]
initial_condition = 0
[]
[]
[AuxKernels]
[SWater]
type = MaterialStdVectorAux
property = PorousFlow_saturation_qp
index = 0
variable = SWater
[]
[SOil]
type = MaterialStdVectorAux
property = PorousFlow_saturation_qp
index = 1
variable = SOil
[]
[]
[BCs]
# we are pumping water into a system that has virtually incompressible fluids, hence the pressures rise enormously. this adversely affects convergence because of almost-overflows and precision-loss problems. The fixed things help keep pressures low and so prevent these awful behaviours. the movement of the saturation front is the same regardless of the fixed things.
active = 'recharge fixedoil fixedwater'
[recharge]
type = PorousFlowSink
variable = pwater
boundary = 'left'
flux_function = -1.0
[]
[fixedwater]
type = DirichletBC
variable = pwater
boundary = 'right'
value = 0
[]
[fixedoil]
type = DirichletBC
variable = poil
boundary = 'right'
value = 15
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
petsc_options = '-snes_converged_reason -ksp_diagonal_scale -ksp_diagonal_scale_fix -ksp_gmres_modifiedgramschmidt -snes_linesearch_monitor'
petsc_options_iname = '-ksp_type -pc_type -sub_pc_type -sub_pc_factor_shift_type -pc_asm_overlap -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'gmres asm lu NONZERO 2 1E-10 1E-10 10000'
[]
[]
[VectorPostprocessors]
[swater]
type = LineValueSampler
warn_discontinuous_face_values = false
variable = SWater
start_point = '0 0 0'
end_point = '7 0 0'
sort_by = x
num_points = 21
execute_on = timestep_end
[]
[]
[Executioner]
type = Transient
solve_type = Newton
petsc_options = '-snes_converged_reason'
end_time = 5
[TimeStepper]
type = FunctionDT
function = dts
[]
[]
[Outputs]
file_base = rsc02
[along_line]
type = CSV
execute_vector_postprocessors_on = final
[]
[exodus]
type = Exodus
execute_on = 'initial final'
[]
[]
(modules/porous_flow/test/tests/pressure_pulse/pressure_pulse_1d_2phase.i)
# Pressure pulse in 1D with 2 phases (with one having zero saturation), 2components - transient
[Mesh]
type = GeneratedMesh
dim = 1
nx = 10
xmin = 0
xmax = 100
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[ppwater]
initial_condition = 2E6
[]
[ppgas]
initial_condition = 2E6
[]
[]
[AuxVariables]
[massfrac_ph0_sp0]
initial_condition = 1
[]
[massfrac_ph1_sp0]
initial_condition = 0
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = ppwater
[]
[flux0]
type = PorousFlowAdvectiveFlux
variable = ppwater
gravity = '0 0 0'
fluid_component = 0
[]
[mass1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = ppgas
[]
[flux1]
type = PorousFlowAdvectiveFlux
variable = ppgas
gravity = '0 0 0'
fluid_component = 1
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'ppwater ppgas'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 2e9
density0 = 1000
thermal_expansion = 0
viscosity = 1e-3
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 2e6
density0 = 1
thermal_expansion = 0
viscosity = 1e-5
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePP
phase0_porepressure = ppwater
phase1_porepressure = ppgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph1_sp0'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-15 0 0 0 1E-15 0 0 0 1E-15'
[]
[relperm_water]
type = PorousFlowRelativePermeabilityCorey
n = 1
phase = 0
[]
[relperm_gas]
type = PorousFlowRelativePermeabilityCorey
n = 1
phase = 1
[]
[]
[BCs]
[leftwater]
type = DirichletBC
boundary = left
value = 3E6
variable = ppwater
[]
[leftgas]
type = DirichletBC
boundary = left
value = 3E6
variable = ppgas
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
petsc_options = '-snes_converged_reason -ksp_diagonal_scale -ksp_diagonal_scale_fix -ksp_gmres_modifiedgramschmidt -snes_linesearch_monitor'
petsc_options_iname = '-ksp_type -pc_type -sub_pc_type -sub_pc_factor_shift_type -pc_asm_overlap -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'gmres asm lu NONZERO 2 1E-15 1E-20 20'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1E3
end_time = 1E4
[]
[Postprocessors]
[p000]
type = PointValue
variable = ppwater
point = '0 0 0'
execute_on = 'initial timestep_end'
[]
[p010]
type = PointValue
variable = ppwater
point = '10 0 0'
execute_on = 'initial timestep_end'
[]
[p020]
type = PointValue
variable = ppwater
point = '20 0 0'
execute_on = 'initial timestep_end'
[]
[p030]
type = PointValue
variable = ppwater
point = '30 0 0'
execute_on = 'initial timestep_end'
[]
[p040]
type = PointValue
variable = ppwater
point = '40 0 0'
execute_on = 'initial timestep_end'
[]
[p050]
type = PointValue
variable = ppwater
point = '50 0 0'
execute_on = 'initial timestep_end'
[]
[p060]
type = PointValue
variable = ppwater
point = '60 0 0'
execute_on = 'initial timestep_end'
[]
[p070]
type = PointValue
variable = ppwater
point = '70 0 0'
execute_on = 'initial timestep_end'
[]
[p080]
type = PointValue
variable = ppwater
point = '80 0 0'
execute_on = 'initial timestep_end'
[]
[p090]
type = PointValue
variable = ppwater
point = '90 0 0'
execute_on = 'initial timestep_end'
[]
[p100]
type = PointValue
variable = ppwater
point = '100 0 0'
execute_on = 'initial timestep_end'
[]
[]
[Outputs]
file_base = pressure_pulse_1d_2phase
print_linear_residuals = false
csv = true
[]
(modules/porous_flow/test/tests/sinks/s09_fully_saturated.i)
# Apply a piecewise-linear sink flux to the right-hand side and watch fluid flow to it
#
# This test has a single phase with two components. The test initialises with
# the porous material fully filled with component=1. The left-hand side is fixed
# at porepressure=1 and mass-fraction of the zeroth component being unity.
# The right-hand side has a very strong piecewise-linear flux that keeps the
# porepressure~0 at that side. Fluid mass is extracted by this flux in proportion
# to the fluid component mass fraction.
#
# Therefore, the zeroth fluid component will flow from left to right (down the
# pressure gradient).
#
# The important DE is
# porosity * dc/dt = (perm / visc) * grad(P) * grad(c)
# which is true for c = mass-fraction, and very large bulk modulus of the fluid.
# For grad(P) constant in time and space (as in this example) this is just the
# advection equation for c, with velocity = perm / visc / porosity. The parameters
# are chosen to velocity = 1 m/s.
# In the numerical world, and especially with full upwinding, the advection equation
# suffers from diffusion. In this example, the diffusion is obvious when plotting
# the mass-fraction along the line, but the average velocity of the front is still
# correct at 1 m/s.
# This test uses the FullySaturated version of the flow Kernel. This does not
# suffer from as much numerical diffusion as the standard PorousFlow Kernel since
# it does not employ any upwinding.
[Mesh]
type = GeneratedMesh
dim = 1
nx = 100
xmin = 0
xmax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp frac'
number_fluid_phases = 1
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[Variables]
[pp]
[]
[frac]
[]
[]
[ICs]
[pp]
type = FunctionIC
variable = pp
function = 1-x
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = frac
[]
[mass1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = pp
[]
[flux0]
type = PorousFlowFullySaturatedDarcyFlow
fluid_component = 0
gravity = '0 0 0'
variable = frac
[]
[flux1]
type = PorousFlowFullySaturatedDarcyFlow
fluid_component = 1
gravity = '0 0 0'
variable = pp
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1e10 # need large in order for constant-velocity advection
density0 = 1 # almost irrelevant, except that the ability of the right BC to keep P fixed at zero is related to density_P0
thermal_expansion = 0
viscosity = 11
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = frac
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1.1 0 0 0 1.1 0 0 0 1.1'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 2 # irrelevant in this fully-saturated situation
phase = 0
[]
[]
[BCs]
[lhs_fixed_a]
type = DirichletBC
boundary = 'left'
variable = frac
value = 1
[]
[lhs_fixed_b]
type = DirichletBC
boundary = 'left'
variable = pp
value = 1
[]
[flux0]
type = PorousFlowPiecewiseLinearSink
boundary = 'right'
pt_vals = '-100 100'
multipliers = '-1 1'
variable = frac # the zeroth comonent
mass_fraction_component = 0
use_mobility = false
use_relperm = false
fluid_phase = 0
flux_function = 1E4
[]
[flux1]
type = PorousFlowPiecewiseLinearSink
boundary = 'right'
pt_vals = '-100 100'
multipliers = '-1 1'
variable = pp # comonent 1
mass_fraction_component = 1
use_mobility = false
use_relperm = false
fluid_phase = 0
flux_function = 1E4
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -sub_pc_type -snes_max_it -sub_pc_factor_shift_type -pc_asm_overlap'
petsc_options_value = 'gmres asm lu 10000 NONZERO 2'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1E-2
end_time = 1
nl_rel_tol = 1E-11
nl_abs_tol = 1E-11
[]
[VectorPostprocessors]
[mf]
type = LineValueSampler
start_point = '0 0 0'
end_point = '1 0 0'
num_points = 100
sort_by = x
variable = frac
[]
[]
[Outputs]
file_base = s09_fully_saturated
[console]
type = Console
execute_on = 'nonlinear linear'
[]
[csv]
type = CSV
sync_times = '0.1 0.5 1'
sync_only = true
[]
time_step_interval = 10
[]
(modules/porous_flow/test/tests/gravity/grav01d.i)
# Test illustrating that PorousFlow allows block-restricted relative permeabilities and capillarities
# and automatically adds appropriate Joiners.
# Physically, this test is checking that gravity head is established
# for 1phase, vanGenuchten, constant fluid-bulk, constant viscosity, constant permeability, Corey relative perm
# For better agreement with the analytical solution (ana_pp), just increase nx
[Mesh]
[gen]
type = GeneratedMeshGenerator
dim = 1
nx = 100
xmin = -1
xmax = 0
[]
[define_block1]
input = gen
type = SubdomainBoundingBoxGenerator
block_id = 1
bottom_left = '-1 -1 -1'
top_right = '-0.5 1 1'
[]
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
[InitialCondition]
type = RandomIC
min = -1
max = 1
[]
[]
[]
[Kernels]
[dot]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
[]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = pp
gravity = '-1 0 0'
[]
[]
[Functions]
[ana_pp]
type = ParsedFunction
symbol_names = 'g B p0 rho0'
symbol_values = '1 2 -1 1'
expression = '-B*log(exp(-p0/B)+g*rho0*x/B)' # expected pp at base
[]
[]
[BCs]
[z]
type = DirichletBC
variable = pp
boundary = right
value = -1
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc_0]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[pc_1]
type = PorousFlowCapillaryPressureVG
m = 0.6
alpha = 2
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2
density0 = 1
viscosity = 1
thermal_expansion = 0
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss_0]
type = PorousFlow1PhaseP
block = 0
porepressure = pp
capillary_pressure = pc_0
[]
[ppss_1]
type = PorousFlow1PhaseP
block = 1
porepressure = pp
capillary_pressure = pc_1
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 2 0 0 0 3'
[]
[relperm_0]
type = PorousFlowRelativePermeabilityCorey
block = 0
n = 1
phase = 0
[]
[relperm_1]
type = PorousFlowRelativePermeabilityCorey
block = 1
n = 2
phase = 0
[]
[]
[Postprocessors]
[pp_base]
type = PointValue
variable = pp
point = '-1 0 0'
[]
[pp_analytical]
type = FunctionValuePostprocessor
function = ana_pp
point = '-1 0 0'
[]
[]
[Preconditioning]
active = andy
[andy]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1E6
end_time = 1E6
[]
[Outputs]
execute_on = 'timestep_end'
file_base = grav01d
csv = true
[]
(modules/porous_flow/test/tests/dirackernels/pls02.i)
# fully-saturated situation with a poly-line sink with use_mobility=true
# The poly-line consists of 2 points, and has a length
# of 0.5. Each point is weighted with a weight of 0.1
# The PorousFlowPolyLineSink has
# p_or_t_vals = 0 1E7
# fluxes = 0 1
# so that for 0<=porepressure<=1E7
# base flux = porepressure * 1E-6 * mobility (measured in kg.m^-1.s^-1),
# and when multiplied by the poly-line length, and
# the weighting of each point, the mass flux is
# flux = porepressure * 0.5*E-8 * mobility (kg.s^-1).
#
# The fluid and matrix properties are:
# porosity = 0.1
# element volume = 8 m^3
# density = dens0 * exp(P / bulk), with bulk = 2E7
# initial porepressure P0 = 1E7
# viscosity = 0.2
# So, fluid mass = 0.8 * density (kg)
#
# The equation to solve is
# d(Mass)/dt = - porepressure * 0.5*E-8 * density / viscosity
#
# PorousFlow discretises time to conserve mass, so to march
# forward in time, we must solve
# Mass(dt) = Mass(0) - P * 0.5E-8 * density / viscosity * dt
# or
# 0.8 * dens0 * exp(P/bulk) = 0.8 * dens0 * exp(P0/bulk) - P * 0.5E-8 * density / viscosity * dt
# For the numbers written above this gives
# P(t=1) = 6.36947 MPa
# which is given precisely by MOOSE
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 1
xmin = -1
xmax = 1
ymin = -1
ymax = 1
zmin = -1
zmax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
initial_condition = 1E7
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
[]
[]
[UserObjects]
[pls_total_outflow_mass]
type = PorousFlowSumQuantity
[]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1e-7
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e7
viscosity = 0.2
density0 = 1000
thermal_expansion = 0
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-12 0 0 0 1E-12 0 0 0 1E-12'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[]
[DiracKernels]
[pls]
# This defines a sink that has strength
# f = L(P) * relperm * L_seg
# where
# L(P) is a piecewise-linear function of porepressure
# that is zero at pp=0 and 1 at pp=1E7
# relperm is the relative permeability of the fluid
# L_seg is the line-segment length associated with
# the Dirac points defined in the file pls02.bh
type = PorousFlowPolyLineSink
# Because the Variable for this Sink is pp, and pp is associated
# with the fluid-mass conservation equation, this sink is extracting
# fluid mass (and not heat energy or something else)
variable = pp
# The following specfies that the total fluid mass coming out of
# the porespace via this sink in this timestep should be recorded
# in the pls_total_outflow_mass UserObject
SumQuantityUO = pls_total_outflow_mass
# The following file defines the polyline geometry
# which is just two points in this particular example
point_file = pls02.bh
# Now define the piecewise-linear function, L
# First, we want L to be a function of porepressure (and not
# temperature or something else). The following means that
# p_or_t_vals should be intepreted by MOOSE as the zeroth-phase
# porepressure
function_of = pressure
fluid_phase = 0
# Second, define the piecewise-linear function, L
# The following means
# flux=0 when pp=0 (and also pp<0)
# flux=1 when pp=1E7 (and also pp>1E7)
# flux=linearly intepolated between pp=0 and pp=1E7
# When flux>0 this means a sink, while flux<0 means a source
p_or_t_vals = '0 1E7'
fluxes = '0 1'
# Finally, in this case we want to always multiply
# L by the fluid mobility (of the zeroth phase) and
# use that in the sink strength instead of the bare L
# computed above
use_mobility = true
[]
[]
[Postprocessors]
[pls_report]
type = PorousFlowPlotQuantity
uo = pls_total_outflow_mass
[]
[fluid_mass0]
type = PorousFlowFluidMass
execute_on = timestep_begin
[]
[fluid_mass1]
type = PorousFlowFluidMass
execute_on = timestep_end
[]
[zmass_error]
type = FunctionValuePostprocessor
function = mass_bal_fcn
execute_on = timestep_end
indirect_dependencies = 'fluid_mass1 fluid_mass0 pls_report'
[]
[p0]
type = PointValue
variable = pp
point = '0 0 0'
execute_on = timestep_end
[]
[]
[Functions]
[mass_bal_fcn]
type = ParsedFunction
expression = abs((a-c+d)/2/(a+c))
symbol_names = 'a c d'
symbol_values = 'fluid_mass1 fluid_mass0 pls_report'
[]
[]
[Preconditioning]
[usual]
type = SMP
full = true
petsc_options = '-snes_converged_reason'
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -ksp_max_it'
petsc_options_value = 'bcgs bjacobi 1E-10 1E-10 10000 30'
[]
[]
[Executioner]
type = Transient
end_time = 1
dt = 1
solve_type = NEWTON
[]
[Outputs]
file_base = pls02
exodus = false
csv = true
execute_on = timestep_end
[]
(modules/porous_flow/test/tests/jacobian/waterncg_gas.i)
# Tests correct calculation of properties derivatives in PorousFlowWaterNCG
# for conditions that give a single gas phase
[Mesh]
type = GeneratedMesh
dim = 2
nx = 2
ny = 2
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[Variables]
[pgas]
[]
[z]
[]
[]
[ICs]
[pgas]
type = RandomIC
min = 1e4
max = 4e4
variable = pgas
[]
[z]
type = RandomIC
min = 0.88
max = 0.98
variable = z
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
variable = pgas
fluid_component = 0
[]
[mass1]
type = PorousFlowMassTimeDerivative
variable = z
fluid_component = 1
[]
[adv0]
type = PorousFlowAdvectiveFlux
variable = pgas
fluid_component = 0
[]
[adv1]
type = PorousFlowAdvectiveFlux
variable = z
fluid_component = 1
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pgas z'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
pc_max = 1e3
[]
[fs]
type = PorousFlowWaterNCG
water_fp = water
gas_fp = co2
capillary_pressure = pc
[]
[]
[FluidProperties]
[co2]
type = CO2FluidProperties
[]
[water]
type = Water97FluidProperties
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = 50
[]
[waterncg]
type = PorousFlowFluidState
gas_porepressure = pgas
z = z
temperature_unit = Celsius
capillary_pressure = pc
fluid_state = fs
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-12 0 0 0 1e-12 0 0 0 1e-12'
[]
[relperm0]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[relperm1]
type = PorousFlowRelativePermeabilityCorey
n = 3
phase = 1
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[]
[Executioner]
type = Transient
solve_type = NEWTON
dt = 1
end_time = 1
nl_abs_tol = 1e-12
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[AuxVariables]
[sgas]
family = MONOMIAL
order = CONSTANT
[]
[]
[AuxKernels]
[sgas]
type = PorousFlowPropertyAux
property = saturation
phase = 1
variable = sgas
[]
[]
[Postprocessors]
[sgas_min]
type = ElementExtremeValue
variable = sgas
value_type = min
[]
[sgas_max]
type = ElementExtremeValue
variable = sgas
value_type = max
[]
[]
(modules/porous_flow/test/tests/heterogeneous_materials/constant_poroperm.i)
# Assign porosity and permeability variables from constant AuxVariables to create
# a heterogeneous model
[Mesh]
type = GeneratedMesh
dim = 3
nx = 3
ny = 3
nz = 3
xmax = 3
ymax = 3
zmax = 3
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 -10'
[]
[Variables]
[ppwater]
initial_condition = 1.5e6
[]
[]
[AuxVariables]
[poro]
family = MONOMIAL
order = CONSTANT
[]
[permxx]
family = MONOMIAL
order = CONSTANT
[]
[permxy]
family = MONOMIAL
order = CONSTANT
[]
[permxz]
family = MONOMIAL
order = CONSTANT
[]
[permyx]
family = MONOMIAL
order = CONSTANT
[]
[permyy]
family = MONOMIAL
order = CONSTANT
[]
[permyz]
family = MONOMIAL
order = CONSTANT
[]
[permzx]
family = MONOMIAL
order = CONSTANT
[]
[permzy]
family = MONOMIAL
order = CONSTANT
[]
[permzz]
family = MONOMIAL
order = CONSTANT
[]
[poromat]
family = MONOMIAL
order = CONSTANT
[]
[permxxmat]
family = MONOMIAL
order = CONSTANT
[]
[permxymat]
family = MONOMIAL
order = CONSTANT
[]
[permxzmat]
family = MONOMIAL
order = CONSTANT
[]
[permyxmat]
family = MONOMIAL
order = CONSTANT
[]
[permyymat]
family = MONOMIAL
order = CONSTANT
[]
[permyzmat]
family = MONOMIAL
order = CONSTANT
[]
[permzxmat]
family = MONOMIAL
order = CONSTANT
[]
[permzymat]
family = MONOMIAL
order = CONSTANT
[]
[permzzmat]
family = MONOMIAL
order = CONSTANT
[]
[]
[AuxKernels]
[poromat]
type = PorousFlowPropertyAux
property = porosity
variable = poromat
[]
[permxxmat]
type = PorousFlowPropertyAux
property = permeability
variable = permxxmat
column = 0
row = 0
[]
[permxymat]
type = PorousFlowPropertyAux
property = permeability
variable = permxymat
column = 1
row = 0
[]
[permxzmat]
type = PorousFlowPropertyAux
property = permeability
variable = permxzmat
column = 2
row = 0
[]
[permyxmat]
type = PorousFlowPropertyAux
property = permeability
variable = permyxmat
column = 0
row = 1
[]
[permyymat]
type = PorousFlowPropertyAux
property = permeability
variable = permyymat
column = 1
row = 1
[]
[permyzmat]
type = PorousFlowPropertyAux
property = permeability
variable = permyzmat
column = 2
row = 1
[]
[permzxmat]
type = PorousFlowPropertyAux
property = permeability
variable = permzxmat
column = 0
row = 2
[]
[permzymat]
type = PorousFlowPropertyAux
property = permeability
variable = permzymat
column = 1
row = 2
[]
[permzzmat]
type = PorousFlowPropertyAux
property = permeability
variable = permzzmat
column = 2
row = 2
[]
[]
[ICs]
[poro]
type = RandomIC
seed = 0
variable = poro
max = 0.5
min = 0.1
[]
[permx]
type = FunctionIC
function = permx
variable = permxx
[]
[permy]
type = FunctionIC
function = permy
variable = permyy
[]
[permz]
type = FunctionIC
function = permz
variable = permzz
[]
[]
[Functions]
[permx]
type = ParsedFunction
expression = '(1+x)*1e-11'
[]
[permy]
type = ParsedFunction
expression = '(1+y)*1e-11'
[]
[permz]
type = ParsedFunction
expression = '(1+z)*1e-11'
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
variable = ppwater
[]
[flux0]
type = PorousFlowAdvectiveFlux
variable = ppwater
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'ppwater'
number_fluid_phases = 1
number_fluid_components = 1
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e9
density0 = 1000
viscosity = 1e-3
thermal_expansion = 0
cv = 2
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseFullySaturated
porepressure = ppwater
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = poro
[]
[permeability]
type = PorousFlowPermeabilityConstFromVar
perm_xx = permxx
perm_yy = permyy
perm_zz = permzz
[]
[relperm_water]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[]
[Postprocessors]
[mass_ph0]
type = PorousFlowFluidMass
fluid_component = 0
execute_on = 'initial timestep_end'
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol'
petsc_options_value = 'bcgs bjacobi 1E-12 1E-10'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
end_time = 100
dt = 100
[]
[Outputs]
execute_on = 'initial timestep_end'
exodus = true
perf_graph = true
[]
(modules/porous_flow/test/tests/recover/theis.i)
# Tests that PorousFlow can successfully recover using a checkpoint file.
# This test contains stateful material properties, adaptivity and integrated
# boundary conditions with nodal-sized materials.
#
# This test file is run three times:
# 1) The full input file is run to completion
# 2) The input file is run for half the time and checkpointing is included
# 3) The input file is run in recovery using the checkpoint data
#
# The final output of test 3 is compared to the final output of test 1 to verify
# that recovery was successful.
[Mesh]
type = GeneratedMesh
dim = 1
nx = 20
xmax = 100
bias_x = 1.05
coord_type = RZ
rz_coord_axis = Y
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[Adaptivity]
marker = marker
max_h_level = 4
[Indicators]
[front]
type = GradientJumpIndicator
variable = zi
[]
[]
[Markers]
[marker]
type = ErrorFractionMarker
indicator = front
refine = 0.8
coarsen = 0.2
[]
[]
[]
[AuxVariables]
[saturation_gas]
order = CONSTANT
family = MONOMIAL
[]
[x1]
order = CONSTANT
family = MONOMIAL
[]
[y0]
order = CONSTANT
family = MONOMIAL
[]
[]
[AuxKernels]
[saturation_gas]
type = PorousFlowPropertyAux
variable = saturation_gas
property = saturation
phase = 1
execute_on = timestep_end
[]
[x1]
type = PorousFlowPropertyAux
variable = x1
property = mass_fraction
phase = 0
fluid_component = 1
execute_on = timestep_end
[]
[y0]
type = PorousFlowPropertyAux
variable = y0
property = mass_fraction
phase = 1
fluid_component = 0
execute_on = timestep_end
[]
[]
[Variables]
[pgas]
initial_condition = 20e6
[]
[zi]
initial_condition = 0
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pgas
[]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = pgas
[]
[mass1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = zi
[]
[flux1]
type = PorousFlowAdvectiveFlux
fluid_component = 1
variable = zi
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pgas zi'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureConst
pc = 0
[]
[fs]
type = PorousFlowWaterNCG
water_fp = water
gas_fp = co2
capillary_pressure = pc
[]
[]
[FluidProperties]
[co2]
type = CO2FluidProperties
[]
[water]
type = Water97FluidProperties
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = 20
[]
[waterncg]
type = PorousFlowFluidState
gas_porepressure = pgas
z = zi
temperature_unit = Celsius
capillary_pressure = pc
fluid_state = fs
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.2
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-12 0 0 0 1e-12 0 0 0 1e-12'
[]
[relperm_water]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
s_res = 0.1
sum_s_res = 0.1
[]
[relperm_gas]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 1
[]
[]
[BCs]
[aquifer]
type = PorousFlowPiecewiseLinearSink
variable = pgas
boundary = right
pt_vals = '0 1e8'
multipliers = '0 1e8'
flux_function = 1e-6
PT_shift = 20e6
[]
[]
[DiracKernels]
[source]
type = PorousFlowSquarePulsePointSource
point = '0 0 0'
mass_flux = 2
variable = zi
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = NEWTON
end_time = 2e2
dt = 50
[]
[VectorPostprocessors]
[line]
type = NodalValueSampler
sort_by = x
variable = 'pgas zi'
[]
[]
[Outputs]
print_linear_residuals = false
perf_graph = true
csv = true
[]
(modules/porous_flow/test/tests/fluidstate/theis_brineco2.i)
# Two phase Theis problem: Flow from single source.
# Constant rate injection 2 kg/s
# 1D cylindrical mesh
# Initially, system has only a liquid phase, until enough gas is injected
# to form a gas phase, in which case the system becomes two phase.
#
# This test takes a few minutes to run, so is marked heavy
[Mesh]
type = GeneratedMesh
dim = 1
nx = 2000
xmax = 2000
[]
[Problem]
type = FEProblem
coord_type = RZ
rz_coord_axis = Y
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[AuxVariables]
[saturation_gas]
order = CONSTANT
family = MONOMIAL
[]
[x1]
order = CONSTANT
family = MONOMIAL
[]
[y0]
order = CONSTANT
family = MONOMIAL
[]
[]
[AuxKernels]
[saturation_gas]
type = PorousFlowPropertyAux
variable = saturation_gas
property = saturation
phase = 1
execute_on = timestep_end
[]
[x1]
type = PorousFlowPropertyAux
variable = x1
property = mass_fraction
phase = 0
fluid_component = 1
execute_on = timestep_end
[]
[y0]
type = PorousFlowPropertyAux
variable = y0
property = mass_fraction
phase = 1
fluid_component = 0
execute_on = timestep_end
[]
[]
[Variables]
[pgas]
initial_condition = 20e6
[]
[zi]
initial_condition = 0
[]
[xnacl]
initial_condition = 0.1
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pgas
[]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = pgas
[]
[mass1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = zi
[]
[flux1]
type = PorousFlowAdvectiveFlux
fluid_component = 1
variable = zi
[]
[mass2]
type = PorousFlowMassTimeDerivative
fluid_component = 2
variable = xnacl
[]
[flux2]
type = PorousFlowAdvectiveFlux
fluid_component = 2
variable = xnacl
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pgas zi xnacl'
number_fluid_phases = 2
number_fluid_components = 3
[]
[pc]
type = PorousFlowCapillaryPressureConst
pc = 0
[]
[fs]
type = PorousFlowBrineCO2
brine_fp = brine
co2_fp = co2
capillary_pressure = pc
[]
[]
[FluidProperties]
[co2sw]
type = CO2FluidProperties
[]
[co2]
type = TabulatedFluidProperties
fp = co2sw
[]
[water]
type = Water97FluidProperties
[]
[watertab]
type = TabulatedFluidProperties
fp = water
temperature_min = 273.15
temperature_max = 573.15
fluid_property_file = water_fluid_properties.csv
save_file = false
[]
[brine]
type = BrineFluidProperties
water_fp = watertab
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = 20
[]
[brineco2]
type = PorousFlowFluidState
gas_porepressure = pgas
z = zi
temperature_unit = Celsius
xnacl = xnacl
capillary_pressure = pc
fluid_state = fs
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.2
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-12 0 0 0 1e-12 0 0 0 1e-12'
[]
[relperm_water]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
s_res = 0.1
sum_s_res = 0.1
[]
[relperm_gas]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 1
[]
[]
[BCs]
[rightwater]
type = DirichletBC
boundary = right
value = 20e6
variable = pgas
[]
[]
[DiracKernels]
[source]
type = PorousFlowSquarePulsePointSource
point = '0 0 0'
mass_flux = 2
variable = zi
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = NEWTON
end_time = 1e5
[TimeStepper]
type = IterationAdaptiveDT
dt = 1
growth_factor = 1.5
[]
[]
[VectorPostprocessors]
[line]
type = LineValueSampler
warn_discontinuous_face_values = false
sort_by = x
start_point = '0 0 0'
end_point = '2000 0 0'
num_points = 10000
variable = 'pgas zi xnacl x1 saturation_gas'
execute_on = 'timestep_end'
[]
[]
[Postprocessors]
[pgas]
type = PointValue
point = '4 0 0'
variable = pgas
[]
[sgas]
type = PointValue
point = '4 0 0'
variable = saturation_gas
[]
[zi]
type = PointValue
point = '4 0 0'
variable = zi
[]
[massgas]
type = PorousFlowFluidMass
fluid_component = 1
[]
[x1]
type = PointValue
point = '4 0 0'
variable = x1
[]
[y0]
type = PointValue
point = '4 0 0'
variable = y0
[]
[xnacl]
type = PointValue
point = '4 0 0'
variable = xnacl
[]
[]
[Outputs]
print_linear_residuals = false
perf_graph = true
[csvout]
type = CSV
execute_on = timestep_end
execute_vector_postprocessors_on = final
[]
[]
(modules/porous_flow/test/tests/jacobian/line_sink04.i)
# PorousFlowPolyLineSink with 2-phase, 3-components, with enthalpy, internal_energy, and thermal_conductivity
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 2
nz = 1
xmin = -1
xmax = 1
ymin = -1
ymax = 1
zmin = -1
zmax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[ppwater]
[]
[ppgas]
[]
[massfrac_ph0_sp0]
[]
[massfrac_ph0_sp1]
[]
[massfrac_ph1_sp0]
[]
[massfrac_ph1_sp1]
[]
[temp]
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'temp ppwater ppgas massfrac_ph0_sp0 massfrac_ph0_sp1 massfrac_ph1_sp0 massfrac_ph1_sp1'
number_fluid_phases = 2
number_fluid_components = 3
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[dummy_outflow]
type = PorousFlowSumQuantity
[]
[]
[ICs]
[temp]
type = RandomIC
variable = temp
min = 1
max = 2
[]
[ppwater]
type = RandomIC
variable = ppwater
min = -1
max = 0
[]
[ppgas]
type = RandomIC
variable = ppgas
min = 0
max = 1
[]
[massfrac_ph0_sp0]
type = RandomIC
variable = massfrac_ph0_sp0
min = 0
max = 1
[]
[massfrac_ph0_sp1]
type = RandomIC
variable = massfrac_ph0_sp1
min = 0
max = 1
[]
[massfrac_ph1_sp0]
type = RandomIC
variable = massfrac_ph1_sp0
min = 0
max = 1
[]
[massfrac_ph1_sp1]
type = RandomIC
variable = massfrac_ph1_sp1
min = 0
max = 1
[]
[]
[Kernels]
[dummy_temp]
type = TimeDerivative
variable = temp
[]
[dummy_ppwater]
type = TimeDerivative
variable = ppwater
[]
[dummy_ppgas]
type = TimeDerivative
variable = ppgas
[]
[dummy_m00]
type = TimeDerivative
variable = massfrac_ph0_sp0
[]
[dummy_m01]
type = TimeDerivative
variable = massfrac_ph0_sp1
[]
[dummy_m10]
type = TimeDerivative
variable = massfrac_ph1_sp0
[]
[dummy_m11]
type = TimeDerivative
variable = massfrac_ph1_sp1
[]
[]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 1.5
density0 = 1
thermal_expansion = 0
viscosity = 1
cv = 1.1
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 0.5
density0 = 0.5
thermal_expansion = 0
viscosity = 1.4
cv = 1.8
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = temp
[]
[ppss]
type = PorousFlow2PhasePP
phase0_porepressure = ppwater
phase1_porepressure = ppgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph0_sp1 massfrac_ph1_sp0 massfrac_ph1_sp1'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 2 0 0 0 3'
[]
[relperm0]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[relperm1]
type = PorousFlowRelativePermeabilityCorey
n = 3
phase = 1
[]
[thermal_conductivity]
type = PorousFlowThermalConductivityIdeal
dry_thermal_conductivity = '0.1 0.2 0.3 0.2 0 0.1 0.3 0.1 0.1'
[]
[]
[DiracKernels]
[dirac0]
type = PorousFlowPolyLineSink
fluid_phase = 0
variable = ppwater
point_file = one_point.bh
line_length = 1
SumQuantityUO = dummy_outflow
p_or_t_vals = '-0.9 1.5'
fluxes = '-1.1 2.2'
[]
[dirac1]
type = PorousFlowPolyLineSink
fluid_phase = 1
variable = ppgas
line_length = 1
use_relative_permeability = true
point_file = one_point.bh
SumQuantityUO = dummy_outflow
p_or_t_vals = '-1.9 1.5'
fluxes = '1.1 -2.2'
[]
[dirac2]
type = PorousFlowPolyLineSink
fluid_phase = 0
variable = massfrac_ph0_sp0
line_length = 1.3
use_mobility = true
point_file = one_point.bh
SumQuantityUO = dummy_outflow
p_or_t_vals = '-1.9 1.5'
fluxes = '1.1 -0.2'
[]
[dirac3]
type = PorousFlowPolyLineSink
fluid_phase = 0
variable = massfrac_ph0_sp1
line_length = 1.3
use_enthalpy = true
mass_fraction_component = 0
point_file = one_point.bh
SumQuantityUO = dummy_outflow
p_or_t_vals = '-1.9 1.5'
fluxes = '1.1 -0.2'
[]
[dirac4]
type = PorousFlowPolyLineSink
fluid_phase = 1
variable = massfrac_ph1_sp0
function_of = temperature
line_length = 0.9
mass_fraction_component = 1
use_internal_energy = true
point_file = one_point.bh
SumQuantityUO = dummy_outflow
p_or_t_vals = '-1.9 1.5'
fluxes = '1.1 -0.2'
[]
[dirac5]
type = PorousFlowPolyLineSink
fluid_phase = 1
variable = temp
line_length = 0.9
mass_fraction_component = 2
use_internal_energy = true
point_file = one_point.bh
SumQuantityUO = dummy_outflow
p_or_t_vals = '-1.9 1.5'
fluxes = '1.1 -0.2'
[]
[dirac6]
type = PorousFlowPolyLineSink
fluid_phase = 1
variable = massfrac_ph0_sp0
use_mobility = true
function_of = temperature
mass_fraction_component = 1
use_relative_permeability = true
use_internal_energy = true
point_file = ten_points.bh
SumQuantityUO = dummy_outflow
p_or_t_vals = '-1.9 1.5'
fluxes = '0 -0.2'
[]
[]
[Preconditioning]
[check]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -snes_type'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000 test'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
[Outputs]
file_base = line_sink04
[]
(modules/porous_flow/test/tests/aux_kernels/darcy_velocity_lower.i)
# checking that the PorousFlowDarcyVelocityComponentLowerDimensional AuxKernel works as expected
# for the fully-saturated case (relative-permeability = 1)
# The fractured_block.e has size = 10x10x10, and a fracture running through its
# centre, with normal = (0, -sin(20deg), cos(20deg))
# Porepressure is initialised to grad(P) = (0, 0, 1)
# Fluid_density = 2
# viscosity = 10
# relative_permeability = 1
# permeability = (5, 5, 5) (in the bulk)
# permeability = (10, 10, 10) (in the fracture)
# aperture = 1
# gravity = (1, 0.5, 0.2)
# So Darcy velocity in the bulk = (1, 0.5, -0.3)
# in the fracture grad(P) = (0, 0.3213938, 0.11697778)
# In the fracture the projected gravity vector is
# tangential_gravity = (1, 0.5057899, 0.18409245)
# So the Darcy velocity in the fracture = (2, 0.690186, 0.251207)
[Mesh]
type = FileMesh
file = fractured_block.e
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '1 0.5 0.2'
[]
[Variables]
[pp]
[]
[]
[ICs]
[pinit]
type = FunctionIC
function = z
variable = pp
[]
[]
[Kernels]
[dummy]
type = TimeDerivative
variable = pp
[]
[]
[AuxVariables]
[bulk_vel_x]
order = CONSTANT
family = MONOMIAL
[]
[bulk_vel_y]
order = CONSTANT
family = MONOMIAL
[]
[bulk_vel_z]
order = CONSTANT
family = MONOMIAL
[]
[fracture_vel_x]
order = CONSTANT
family = MONOMIAL
block = 3
[]
[fracture_vel_y]
order = CONSTANT
family = MONOMIAL
block = 3
[]
[fracture_vel_z]
order = CONSTANT
family = MONOMIAL
block = 3
[]
[]
[AuxKernels]
[bulk_vel_x]
type = PorousFlowDarcyVelocityComponent
variable = bulk_vel_x
component = x
fluid_phase = 0
[]
[bulk_vel_y]
type = PorousFlowDarcyVelocityComponent
variable = bulk_vel_y
component = y
fluid_phase = 0
[]
[bulk_vel_z]
type = PorousFlowDarcyVelocityComponent
variable = bulk_vel_z
component = z
fluid_phase = 0
[]
[fracture_vel_x]
type = PorousFlowDarcyVelocityComponentLowerDimensional
variable = fracture_vel_x
component = x
fluid_phase = 0
[]
[fracture_vel_y]
type = PorousFlowDarcyVelocityComponentLowerDimensional
variable = fracture_vel_y
component = y
fluid_phase = 0
[]
[fracture_vel_z]
type = PorousFlowDarcyVelocityComponentLowerDimensional
variable = fracture_vel_z
component = z
fluid_phase = 0
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureConst
pc = 0
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1E16
viscosity = 10
density0 = 2
thermal_expansion = 0
[]
[]
[Postprocessors]
[bulk_vel_x]
type = ElementAverageValue
block = 1
variable = bulk_vel_x
[]
[bulk_vel_y]
type = ElementAverageValue
block = 1
variable = bulk_vel_y
[]
[bulk_vel_z]
type = ElementAverageValue
block = 1
variable = bulk_vel_z
[]
[fracture_vel_x]
type = ElementAverageValue
block = 3
variable = fracture_vel_x
[]
[fracture_vel_y]
type = ElementAverageValue
block = 3
variable = fracture_vel_y
[]
[fracture_vel_z]
type = ElementAverageValue
block = 3
variable = fracture_vel_z
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '5 0 0 0 5 0 0 0 5'
block = '1 2'
[]
[permeability_fracture]
type = PorousFlowPermeabilityConst
permeability = '10 0 0 0 10 0 0 0 10'
block = 3
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[]
[Executioner]
type = Transient
dt = 1
end_time = 1
[]
[Outputs]
csv = true
[]
(modules/porous_flow/test/tests/sinks/s06.i)
# apply a half-cubic sink flux and observe the correct behavior
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 1
xmin = 0
xmax = 1
ymin = 0
ymax = 1
zmin = 0
zmax = 2
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1.1
[]
[]
[Variables]
[pp]
[]
[]
[ICs]
[pp]
type = FunctionIC
variable = pp
function = x*(y+1)
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1.3
density0 = 1.1
thermal_expansion = 0
viscosity = 1.1
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-5 0 0 0 1E-5 0 0 0 1E-5'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[]
[AuxVariables]
[flux_out]
[]
[]
[Functions]
[mass10]
type = ParsedFunction
expression = 'vol*por*dens0*exp(pp/bulk)*if(pp>=0,1,pow(1+pow(-al*pp,1.0/(1-m)),-m))'
symbol_names = 'vol por dens0 pp bulk al m'
symbol_values = '0.25 0.1 1.1 p10 1.3 1.1 0.5'
[]
[rate10]
type = ParsedFunction
expression = 'fcn*if(pp>center,m,if(pp<themin,0,m/c/c/c*(2*(pp-center)+c)*((pp-center)-c)*((pp-center)-c)))'
symbol_names = 'm fcn pp center sd themin c'
symbol_values = '2 3 p10 0.9 0.5 0.1 -0.8'
[]
[mass10_expect]
type = ParsedFunction
expression = 'mass_prev-rate*area*dt'
symbol_names = 'mass_prev rate area dt'
symbol_values = 'm10_prev m10_rate 0.5 2E-3'
[]
[mass11]
type = ParsedFunction
expression = 'vol*por*dens0*exp(pp/bulk)*if(pp>=0,1,pow(1+pow(-al*pp,1.0/(1-m)),-m))'
symbol_names = 'vol por dens0 pp bulk al m'
symbol_values = '0.25 0.1 1.1 p11 1.3 1.1 0.5'
[]
[rate11]
type = ParsedFunction
expression = 'fcn*if(pp>center,m,if(pp<themin,0,m/c/c/c*(2*(pp-center)+c)*((pp-center)-c)*((pp-center)-c)))'
symbol_names = 'm fcn pp center sd themin c'
symbol_values = '2 3 p11 0.9 0.5 0.1 -0.8'
[]
[mass11_expect]
type = ParsedFunction
expression = 'mass_prev-rate*area*dt'
symbol_names = 'mass_prev rate area dt'
symbol_values = 'm11_prev m11_rate 0.5 2E-3'
[]
[]
[Postprocessors]
[flux00]
type = PointValue
variable = flux_out
point = '0 0 0'
[]
[flux01]
type = PointValue
variable = flux_out
point = '0 1 0'
[]
[flux10]
type = PointValue
variable = flux_out
point = '1 0 0'
[]
[flux11]
type = PointValue
variable = flux_out
point = '1 1 0'
[]
[p00]
type = PointValue
point = '0 0 0'
variable = pp
execute_on = 'initial timestep_end'
[]
[p10]
type = PointValue
point = '1 0 0'
variable = pp
execute_on = 'initial timestep_end'
[]
[m10]
type = FunctionValuePostprocessor
function = mass10
execute_on = 'initial timestep_end'
[]
[m10_prev]
type = FunctionValuePostprocessor
function = mass10
execute_on = 'timestep_begin'
outputs = 'console'
[]
[m10_rate]
type = FunctionValuePostprocessor
function = rate10
execute_on = 'timestep_end'
[]
[m10_expect]
type = FunctionValuePostprocessor
function = mass10_expect
execute_on = 'timestep_end'
[]
[p01]
type = PointValue
point = '0 1 0'
variable = pp
execute_on = 'initial timestep_end'
[]
[p11]
type = PointValue
point = '1 1 0'
variable = pp
execute_on = 'initial timestep_end'
[]
[m11]
type = FunctionValuePostprocessor
function = mass11
execute_on = 'initial timestep_end'
[]
[m11_prev]
type = FunctionValuePostprocessor
function = mass11
execute_on = 'timestep_begin'
outputs = 'console'
[]
[m11_rate]
type = FunctionValuePostprocessor
function = rate11
execute_on = 'timestep_end'
[]
[m11_expect]
type = FunctionValuePostprocessor
function = mass11_expect
execute_on = 'timestep_end'
[]
[]
[BCs]
[flux]
type = PorousFlowHalfCubicSink
boundary = 'left right'
max = 2
cutoff = -0.8
center = 0.9
variable = pp
use_mobility = false
use_relperm = false
fluid_phase = 0
flux_function = 3
save_in = flux_out
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -sub_pc_type -snes_max_it -sub_pc_factor_shift_type -pc_asm_overlap'
petsc_options_value = 'gmres asm lu 10000 NONZERO 2'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 2E-3
end_time = 6E-2
nl_rel_tol = 1E-12
nl_abs_tol = 1E-12
[]
[Outputs]
file_base = s06
[console]
type = Console
execute_on = 'nonlinear linear'
time_step_interval = 5
[]
[csv]
type = CSV
execute_on = 'timestep_end'
time_step_interval = 3
[]
[]
(modules/porous_flow/test/tests/jacobian/line_sink02.i)
# PorousFlowPolyLineSink with 2-phase, 3-components, with enthalpy, internal_energy, and thermal_conductivity
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 2
nz = 1
xmin = -1
xmax = 1
ymin = -1
ymax = 1
zmin = -1
zmax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[ppwater]
[]
[ppgas]
[]
[massfrac_ph0_sp0]
[]
[massfrac_ph0_sp1]
[]
[massfrac_ph1_sp0]
[]
[massfrac_ph1_sp1]
[]
[temp]
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'temp ppwater ppgas massfrac_ph0_sp0 massfrac_ph0_sp1 massfrac_ph1_sp0 massfrac_ph1_sp1'
number_fluid_phases = 2
number_fluid_components = 3
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[dummy_outflow]
type = PorousFlowSumQuantity
[]
[]
[ICs]
[temp]
type = RandomIC
variable = temp
min = 1
max = 2
[]
[ppwater]
type = RandomIC
variable = ppwater
min = -1
max = 0
[]
[ppgas]
type = RandomIC
variable = ppgas
min = 0
max = 1
[]
[massfrac_ph0_sp0]
type = RandomIC
variable = massfrac_ph0_sp0
min = 0
max = 1
[]
[massfrac_ph0_sp1]
type = RandomIC
variable = massfrac_ph0_sp1
min = 0
max = 1
[]
[massfrac_ph1_sp0]
type = RandomIC
variable = massfrac_ph1_sp0
min = 0
max = 1
[]
[massfrac_ph1_sp1]
type = RandomIC
variable = massfrac_ph1_sp1
min = 0
max = 1
[]
[]
[Kernels]
[dummy_temp]
type = TimeDerivative
variable = temp
[]
[dummy_ppwater]
type = TimeDerivative
variable = ppwater
[]
[dummy_ppgas]
type = TimeDerivative
variable = ppgas
[]
[dummy_m00]
type = TimeDerivative
variable = massfrac_ph0_sp0
[]
[dummy_m01]
type = TimeDerivative
variable = massfrac_ph0_sp1
[]
[dummy_m10]
type = TimeDerivative
variable = massfrac_ph1_sp0
[]
[dummy_m11]
type = TimeDerivative
variable = massfrac_ph1_sp1
[]
[]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 1.5
density0 = 1
thermal_expansion = 0
viscosity = 1
cv = 1.1
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 0.5
density0 = 0.5
thermal_expansion = 0
viscosity = 1.4
cv = 1.8
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = temp
[]
[ppss]
type = PorousFlow2PhasePP
phase0_porepressure = ppwater
phase1_porepressure = ppgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph0_sp1 massfrac_ph1_sp0 massfrac_ph1_sp1'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 2 0 0 0 3'
[]
[relperm0]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[relperm1]
type = PorousFlowRelativePermeabilityCorey
n = 3
phase = 1
[]
[thermal_conductivity]
type = PorousFlowThermalConductivityIdeal
dry_thermal_conductivity = '0.1 0.2 0.3 0.2 0 0.1 0.3 0.1 0.1'
[]
[]
[DiracKernels]
[dirac0]
type = PorousFlowPolyLineSink
fluid_phase = 0
variable = ppwater
point_file = one_point.bh
line_length = 1
SumQuantityUO = dummy_outflow
p_or_t_vals = '-0.9 1.5'
fluxes = '-1.1 2.2'
[]
[dirac1]
type = PorousFlowPolyLineSink
fluid_phase = 1
variable = ppgas
line_length = 1
use_relative_permeability = true
point_file = one_point.bh
SumQuantityUO = dummy_outflow
p_or_t_vals = '-1.9 1.5'
fluxes = '1.1 -2.2'
[]
[dirac2]
type = PorousFlowPolyLineSink
fluid_phase = 0
variable = massfrac_ph0_sp0
line_length = 1.3
use_mobility = true
point_file = one_point.bh
SumQuantityUO = dummy_outflow
p_or_t_vals = '-1.9 1.5'
fluxes = '1.1 -0.2'
[]
[dirac3]
type = PorousFlowPolyLineSink
fluid_phase = 0
variable = massfrac_ph0_sp1
line_length = 1.3
use_enthalpy = true
mass_fraction_component = 0
point_file = one_point.bh
SumQuantityUO = dummy_outflow
p_or_t_vals = '-1.9 1.5'
fluxes = '1.1 -0.2'
[]
[dirac4]
type = PorousFlowPolyLineSink
fluid_phase = 1
variable = massfrac_ph1_sp0
function_of = temperature
line_length = 0.9
mass_fraction_component = 1
use_internal_energy = true
point_file = one_point.bh
SumQuantityUO = dummy_outflow
p_or_t_vals = '-1.9 1.5'
fluxes = '1.1 -0.2'
[]
[dirac5]
type = PorousFlowPolyLineSink
fluid_phase = 1
variable = temp
line_length = 0.9
mass_fraction_component = 2
use_internal_energy = true
point_file = one_point.bh
SumQuantityUO = dummy_outflow
p_or_t_vals = '-1.9 1.5'
fluxes = '1.1 -0.2'
[]
[dirac6]
type = PorousFlowPolyLineSink
fluid_phase = 1
variable = massfrac_ph0_sp0
use_mobility = true
function_of = temperature
mass_fraction_component = 1
use_relative_permeability = true
use_internal_energy = true
point_file = one_point.bh
SumQuantityUO = dummy_outflow
p_or_t_vals = '-1.9 1.5'
fluxes = '0 -0.2'
[]
[]
[Preconditioning]
[check]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -snes_type'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000 test'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
[Outputs]
file_base = line_sink02
[]
(modules/porous_flow/test/tests/poroperm/PermFromPoro01.i)
# Testing permeability from porosity
# Trivial test, checking calculated permeability is correct
# k = k_anisotropic * f * d^2 * phi^n / (1-phi)^m
[Mesh]
type = GeneratedMesh
dim = 1
nx = 3
xmin = 0
xmax = 3
[]
[GlobalParams]
block = 0
PorousFlowDictator = dictator
[]
[Variables]
[pp]
[InitialCondition]
type = ConstantIC
value = 0
[]
[]
[]
[Kernels]
[flux]
type = PorousFlowAdvectiveFlux
gravity = '0 0 0'
variable = pp
[]
[]
[BCs]
[ptop]
type = DirichletBC
variable = pp
boundary = right
value = 0
[]
[pbase]
type = DirichletBC
variable = pp
boundary = left
value = 1
[]
[]
[AuxVariables]
[poro]
order = CONSTANT
family = MONOMIAL
[]
[perm_x]
order = CONSTANT
family = MONOMIAL
[]
[perm_y]
order = CONSTANT
family = MONOMIAL
[]
[perm_z]
order = CONSTANT
family = MONOMIAL
[]
[]
[AuxKernels]
[poro]
type = PorousFlowPropertyAux
property = porosity
variable = poro
[]
[perm_x]
type = PorousFlowPropertyAux
property = permeability
variable = perm_x
row = 0
column = 0
[]
[perm_y]
type = PorousFlowPropertyAux
property = permeability
variable = perm_y
row = 1
column = 1
[]
[perm_z]
type = PorousFlowPropertyAux
property = permeability
variable = perm_z
row = 2
column = 2
[]
[]
[Postprocessors]
[perm_x_bottom]
type = PointValue
variable = perm_x
point = '0 0 0'
[]
[perm_y_bottom]
type = PointValue
variable = perm_y
point = '0 0 0'
[]
[perm_z_bottom]
type = PointValue
variable = perm_z
point = '0 0 0'
[]
[perm_x_top]
type = PointValue
variable = perm_x
point = '3 0 0'
[]
[perm_y_top]
type = PointValue
variable = perm_y
point = '3 0 0'
[]
[perm_z_top]
type = PointValue
variable = perm_z
point = '3 0 0'
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
# unimportant in this fully-saturated test
m = 0.8
alpha = 1e-4
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2.2e9
viscosity = 1e-3
density0 = 1000
thermal_expansion = 0
[]
[]
[Materials]
[permeability]
type = PorousFlowPermeabilityKozenyCarman
k_anisotropy = '1 0 0 0 2 0 0 0 0.1'
poroperm_function = kozeny_carman_fd2
f = 0.1
d = 5
m = 2
n = 7
[]
[temperature]
type = PorousFlowTemperature
[]
[massfrac]
type = PorousFlowMassFraction
[]
[eff_fluid_pressure]
type = PorousFlowEffectiveFluidPressure
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosity
porosity_zero = 0.1
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 0 # unimportant in this fully-saturated situation
phase = 0
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
[]
[]
[Executioner]
solve_type = Newton
type = Steady
l_tol = 1E-5
nl_abs_tol = 1E-3
nl_rel_tol = 1E-8
l_max_its = 200
nl_max_its = 400
petsc_options_iname = '-pc_type -pc_asm_overlap -sub_pc_type -ksp_type -ksp_gmres_restart'
petsc_options_value = ' asm 2 lu gmres 200'
[]
[Outputs]
csv = true
execute_on = 'timestep_end'
[]
(modules/porous_flow/test/tests/fluidstate/brineco2_hightemp.i)
# Tests correct calculation of properties in PorousFlowBrineCO2 in the elevated
# temperature regime (T > 110C)
[Mesh]
type = GeneratedMesh
dim = 2
[]
[GlobalParams]
PorousFlowDictator = dictator
temperature = 250
[]
[Variables]
[pgas]
initial_condition = 20e6
[]
[z]
initial_condition = 0.2
[]
[]
[AuxVariables]
[xnacl]
initial_condition = 0.1
[]
[pressure_gas]
order = CONSTANT
family = MONOMIAL
[]
[pressure_water]
order = CONSTANT
family = MONOMIAL
[]
[saturation_gas]
order = CONSTANT
family = MONOMIAL
[]
[saturation_water]
order = CONSTANT
family = MONOMIAL
[]
[density_water]
order = CONSTANT
family = MONOMIAL
[]
[density_gas]
order = CONSTANT
family = MONOMIAL
[]
[viscosity_water]
order = CONSTANT
family = MONOMIAL
[]
[viscosity_gas]
order = CONSTANT
family = MONOMIAL
[]
[x0_water]
order = CONSTANT
family = MONOMIAL
[]
[x0_gas]
order = CONSTANT
family = MONOMIAL
[]
[x1_water]
order = CONSTANT
family = MONOMIAL
[]
[x1_gas]
order = CONSTANT
family = MONOMIAL
[]
[]
[AuxKernels]
[pressure_water]
type = PorousFlowPropertyAux
variable = pressure_water
property = pressure
phase = 0
execute_on = timestep_end
[]
[pressure_gas]
type = PorousFlowPropertyAux
variable = pressure_gas
property = pressure
phase = 1
execute_on = timestep_end
[]
[saturation_water]
type = PorousFlowPropertyAux
variable = saturation_water
property = saturation
phase = 0
execute_on = timestep_end
[]
[saturation_gas]
type = PorousFlowPropertyAux
variable = saturation_gas
property = saturation
phase = 1
execute_on = timestep_end
[]
[density_water]
type = PorousFlowPropertyAux
variable = density_water
property = density
phase = 0
execute_on = timestep_end
[]
[density_gas]
type = PorousFlowPropertyAux
variable = density_gas
property = density
phase = 1
execute_on = timestep_end
[]
[viscosity_water]
type = PorousFlowPropertyAux
variable = viscosity_water
property = viscosity
phase = 0
execute_on = timestep_end
[]
[viscosity_gas]
type = PorousFlowPropertyAux
variable = viscosity_gas
property = viscosity
phase = 1
execute_on = timestep_end
[]
[x1_water]
type = PorousFlowPropertyAux
variable = x1_water
property = mass_fraction
phase = 0
fluid_component = 1
execute_on = timestep_end
[]
[x1_gas]
type = PorousFlowPropertyAux
variable = x1_gas
property = mass_fraction
phase = 1
fluid_component = 1
execute_on = timestep_end
[]
[x0_water]
type = PorousFlowPropertyAux
variable = x0_water
property = mass_fraction
phase = 0
fluid_component = 0
execute_on = timestep_end
[]
[x0_gas]
type = PorousFlowPropertyAux
variable = x0_gas
property = mass_fraction
phase = 1
fluid_component = 0
execute_on = timestep_end
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
variable = pgas
fluid_component = 0
[]
[mass1]
type = PorousFlowMassTimeDerivative
variable = z
fluid_component = 1
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pgas z'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureConst
pc = 0
[]
[fs]
type = PorousFlowBrineCO2
brine_fp = brine
co2_fp = co2
capillary_pressure = pc
[]
[]
[FluidProperties]
[co2]
type = CO2FluidProperties
[]
[brine]
type = BrineFluidProperties
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[brineco2]
type = PorousFlowFluidState
gas_porepressure = pgas
z = z
temperature_unit = Celsius
xnacl = xnacl
capillary_pressure = pc
fluid_state = fs
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-12 0 0 0 1e-12 0 0 0 1e-12'
[]
[relperm0]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[relperm1]
type = PorousFlowRelativePermeabilityCorey
n = 3
phase = 1
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[]
[Executioner]
type = Transient
solve_type = NEWTON
dt = 1
end_time = 1
nl_abs_tol = 1e-12
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Postprocessors]
[density_water]
type = ElementIntegralVariablePostprocessor
variable = density_water
[]
[density_gas]
type = ElementIntegralVariablePostprocessor
variable = density_gas
[]
[viscosity_water]
type = ElementIntegralVariablePostprocessor
variable = viscosity_water
[]
[viscosity_gas]
type = ElementIntegralVariablePostprocessor
variable = viscosity_gas
[]
[x1_water]
type = ElementIntegralVariablePostprocessor
variable = x1_water
[]
[x0_water]
type = ElementIntegralVariablePostprocessor
variable = x0_water
[]
[x1_gas]
type = ElementIntegralVariablePostprocessor
variable = x1_gas
[]
[x0_gas]
type = ElementIntegralVariablePostprocessor
variable = x0_gas
[]
[sg]
type = ElementIntegralVariablePostprocessor
variable = saturation_gas
[]
[sw]
type = ElementIntegralVariablePostprocessor
variable = saturation_water
[]
[pwater]
type = ElementIntegralVariablePostprocessor
variable = pressure_water
[]
[pgas]
type = ElementIntegralVariablePostprocessor
variable = pressure_gas
[]
[x0mass]
type = PorousFlowFluidMass
fluid_component = 0
phase = '0 1'
[]
[x1mass]
type = PorousFlowFluidMass
fluid_component = 1
phase = '0 1'
[]
[]
[Outputs]
csv = true
execute_on = 'TIMESTEP_END'
perf_graph = false
[]
(modules/porous_flow/test/tests/jacobian/brineco2_twophase_nonisothermal.i)
# Tests correct calculation of properties derivatives in PorousFlowFluidState
# for nonisothermal two phase conditions, including salt as a nonlinear variable
[Mesh]
[mesh]
type = GeneratedMeshGenerator
dim = 2
nx = 2
ny = 2
xmax = 10
ymax = 10
[]
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[Variables]
[pgas]
[]
[zi]
scaling = 1e-4
[]
[xnacl]
[]
[temperature]
scaling = 1e-7
[]
[]
[ICs]
[pgas]
type = RandomIC
min = 1e6
max = 4e6
variable = pgas
seed = 1
[]
[z]
type = RandomIC
min = 0.2
max = 0.8
variable = zi
seed = 1
[]
[xnacl]
type = RandomIC
min = 0.01
max = 0.15
variable = xnacl
seed = 1
[]
[temperature]
type = RandomIC
min = 20
max = 80
variable = temperature
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
variable = pgas
fluid_component = 0
[]
[mass1]
type = PorousFlowMassTimeDerivative
variable = zi
fluid_component = 1
[]
[mass2]
type = PorousFlowMassTimeDerivative
variable = xnacl
fluid_component = 2
[]
[adv0]
type = PorousFlowAdvectiveFlux
variable = pgas
fluid_component = 0
[]
[adv1]
type = PorousFlowAdvectiveFlux
variable = zi
fluid_component = 1
[]
[adv2]
type = PorousFlowAdvectiveFlux
variable = xnacl
fluid_component = 2
[]
[energy]
type = PorousFlowEnergyTimeDerivative
variable = temperature
[]
[heat]
type = PorousFlowHeatAdvection
variable = temperature
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pgas zi xnacl temperature'
number_fluid_phases = 2
number_fluid_components = 3
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
pc_max = 1e3
[]
[fs]
type = PorousFlowBrineCO2
brine_fp = brine
co2_fp = co2
capillary_pressure = pc
[]
[]
[FluidProperties]
[co2]
type = CO2FluidProperties
[]
[brine]
type = BrineFluidProperties
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = temperature
[]
[brineco2]
type = PorousFlowFluidState
gas_porepressure = pgas
z = zi
temperature = temperature
temperature_unit = Celsius
xnacl = xnacl
capillary_pressure = pc
fluid_state = fs
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-12 0 0 0 1e-12 0 0 0 1e-12'
[]
[relperm0]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[relperm1]
type = PorousFlowRelativePermeabilityCorey
n = 3
phase = 1
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[rock_heat]
type = PorousFlowMatrixInternalEnergy
specific_heat_capacity = 1000
density = 2500
[]
[]
[Executioner]
type = Transient
solve_type = NEWTON
dt = 1
end_time = 1
nl_abs_tol = 1e-12
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
(modules/porous_flow/test/tests/jacobian/hgs01.i)
# apply a half-gaussian sink flux and observe the correct behavior
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 2
xmin = -1
xmax = 1
ymin = -1
ymax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[ppwater]
[]
[ppgas]
[]
[massfrac_ph0_sp0]
[]
[massfrac_ph1_sp0]
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'ppwater ppgas massfrac_ph0_sp0 massfrac_ph1_sp0'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[ICs]
[ppwater]
type = RandomIC
variable = ppwater
min = -1
max = 0
[]
[ppgas]
type = RandomIC
variable = ppgas
min = 0
max = 1
[]
[massfrac_ph0_sp0]
type = RandomIC
variable = massfrac_ph0_sp0
min = 0
max = 1
[]
[massfrac_ph1_sp0]
type = RandomIC
variable = massfrac_ph1_sp0
min = 0
max = 1
[]
[]
[Kernels]
[dummy_ppwater]
type = TimeDerivative
variable = ppwater
[]
[dummy_ppgas]
type = TimeDerivative
variable = ppgas
[]
[dummy_m00]
type = TimeDerivative
variable = massfrac_ph0_sp0
[]
[dummy_m10]
type = TimeDerivative
variable = massfrac_ph1_sp0
[]
[]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 1.5
density0 = 1
thermal_expansion = 0
viscosity = 1
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 0.5
density0 = 0.5
thermal_expansion = 0
viscosity = 1.4
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePP
phase0_porepressure = ppwater
phase1_porepressure = ppgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph1_sp0'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 2 0 0 0 3'
[]
[relperm0]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[relperm1]
type = PorousFlowRelativePermeabilityCorey
n = 3
phase = 1
[]
[]
[BCs]
[flux_w]
type = PorousFlowHalfGaussianSink
boundary = 'left'
center = 0.1
sd = 1.1
max = 2.2
variable = ppwater
mass_fraction_component = 0
fluid_phase = 0
use_relperm = true
use_mobility = true
flux_function = 'x*y'
[]
[flux_g]
type = PorousFlowHalfGaussianSink
boundary = 'top left front'
center = 0.5
sd = 1.1
max = -2.2
mass_fraction_component = 0
variable = ppgas
fluid_phase = 1
use_relperm = true
use_mobility = true
flux_function = '-x*y'
[]
[flux_1]
type = PorousFlowHalfGaussianSink
boundary = 'right'
center = -0.1
sd = 1.1
max = 1.2
mass_fraction_component = 1
variable = massfrac_ph0_sp0
fluid_phase = 1
use_relperm = true
use_mobility = true
flux_function = '-1.1*x*y'
[]
[flux_2]
type = PorousFlowHalfGaussianSink
boundary = 'bottom'
center = 3.2
sd = 1.1
max = 1.2
mass_fraction_component = 1
variable = massfrac_ph1_sp0
fluid_phase = 1
use_relperm = true
use_mobility = true
flux_function = '0.5*x*y'
[]
[]
[Preconditioning]
[check]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -snes_type'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000 test'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 2
[]
[Outputs]
file_base = pls03
[]
(modules/porous_flow/test/tests/jacobian/outflowbc04.i)
# PorousFlowOutflowBC: testing Jacobian for multi-phase, multi-component
[Mesh]
[mesh]
type = GeneratedMeshGenerator
dim = 3
[]
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '1 2 3'
[]
[Variables]
[pwater]
initial_condition = 1
[]
[pgas]
initial_condition = 2
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pwater
[]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = pwater
[]
[mass1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = pgas
[]
[flux1]
type = PorousFlowAdvectiveFlux
fluid_component = 1
variable = pgas
[]
[]
[AuxVariables]
[frac_water_in_liquid]
initial_condition = 0.6
[]
[frac_water_in_gas]
initial_condition = 0.4
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pgas pwater'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
alpha = 1
m = 0.6
[]
[]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 1.5
density0 = 1.2
cp = 0.9
cv = 1.1
viscosity = 0.4
thermal_expansion = 0.7
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 2.5
density0 = 0.5
cp = 1.9
cv = 2.1
viscosity = 0.9
thermal_expansion = 0.4
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = 0
[]
[saturation_calculator]
type = PorousFlow2PhasePP
phase0_porepressure = pwater
phase1_porepressure = pgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'frac_water_in_liquid frac_water_in_gas'
[]
[water]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[co2]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.2
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '0.1 0.2 0.3 1.8 0.9 1.7 0.4 0.3 1.1'
[]
[relperm_water]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
s_res = 0.0
sum_s_res = 0.0
[]
[relperm_gas]
type = PorousFlowRelativePermeabilityBC
nw_phase = true
lambda = 2
s_res = 0.0
sum_s_res = 0.0
phase = 1
[]
[]
[BCs]
[outflow0]
type = PorousFlowOutflowBC
boundary = 'front back top bottom'
variable = pwater
mass_fraction_component = 0
multiplier = 1E8 # so this BC gets weighted much more heavily than Kernels
[]
[outflow1]
type = PorousFlowOutflowBC
boundary = 'left right top bottom'
variable = pgas
mass_fraction_component = 1
multiplier = 1E8 # so this BC gets weighted much more heavily than Kernels
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = NEWTON
dt = 1E-7
num_steps = 1
# petsc_options = '-snes_test_jacobian -snes_force_iteration'
# petsc_options_iname = '-snes_type --ksp_type -pc_type -snes_convergence_test'
# petsc_options_value = ' ksponly preonly none skip'
[]
(modules/porous_flow/test/tests/gravity/grav01b.i)
# Checking that gravity head is established
# 1phase, vanGenuchten, constant and large fluid-bulk, constant viscosity, constant permeability, Corey relperm
# fully saturated
# For better agreement with the analytical solution (ana_pp), just increase nx
[Mesh]
type = GeneratedMesh
dim = 1
nx = 100
xmin = -1
xmax = 0
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
[InitialCondition]
type = RandomIC
min = 0
max = 1
[]
[]
[]
[Kernels]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = pp
gravity = '-1 0 0'
[]
[]
[Functions]
[ana_pp]
type = ParsedFunction
symbol_names = 'g B p0 rho0'
symbol_values = '1 1E3 0 1'
expression = '-B*log(exp(-p0/B)+g*rho0*x/B)' # expected pp at base
[]
[]
[BCs]
[z]
type = DirichletBC
variable = pp
boundary = right
value = 0
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1e3
density0 = 1
viscosity = 1
thermal_expansion = 0
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 2 0 0 0 3'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 1
phase = 0
[]
[]
[Postprocessors]
[pp_base]
type = PointValue
variable = pp
point = '-1 0 0'
[]
[pp_analytical]
type = FunctionValuePostprocessor
function = ana_pp
point = '-1 0 0'
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
[]
[]
[Executioner]
type = Steady
solve_type = Newton
[]
[Outputs]
execute_on = 'timestep_end'
file_base = grav01b
[csv]
type = CSV
[]
[]
(modules/porous_flow/test/tests/jacobian/pls01.i)
# PorousFlowPiecewiseLinearSink with 1-phase, 1-component
[Mesh]
type = GeneratedMesh
dim = 2
nx = 1
ny = 1
xmin = -1
xmax = 1
ymin = -1
ymax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[Variables]
[pp]
[]
[]
[ICs]
[pp]
type = RandomIC
variable = pp
max = 0
min = -1
[]
[]
[Kernels]
[dummy]
type = TimeDerivative
variable = pp
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1
density0 = 1
thermal_expansion = 0
viscosity = 1.1
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1.1 0 0 0 2.2 0 0 0 3.3'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[]
[BCs]
[flux]
type = PorousFlowPiecewiseLinearSink
boundary = 'left'
pt_vals = '-1 -0.5 0'
multipliers = '1 2 4'
variable = pp
fluid_phase = 0
use_relperm = true
use_mobility = true
flux_function = 'x*y'
[]
[]
[Preconditioning]
[check]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -snes_type'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000 test'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 2
[]
[Outputs]
file_base = pls01
[]
(modules/porous_flow/test/tests/jacobian/fflux02.i)
# 1phase, 3components, constant viscosity, constant insitu permeability
# density with constant bulk, Corey relative perm, nonzero gravity, unsaturated with vanGenuchten
[Mesh]
type = GeneratedMesh
dim = 2
nx = 2
xmin = 0
xmax = 1
ny = 1
ymin = 0
ymax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
[]
[massfrac0]
[]
[massfrac1]
[]
[]
[ICs]
[pp]
type = FunctionIC
variable = pp
function = -0.7+x+y
[]
[massfrac0]
type = RandomIC
variable = massfrac0
min = 0
max = 0.3
[]
[massfrac1]
type = RandomIC
variable = massfrac1
min = 0
max = 0.4
[]
[]
[Kernels]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = pp
gravity = '-1 -0.1 0'
[]
[flux1]
type = PorousFlowAdvectiveFlux
fluid_component = 1
variable = massfrac0
gravity = '-1 -0.1 0'
[]
[flux2]
type = PorousFlowAdvectiveFlux
fluid_component = 2
variable = massfrac1
gravity = '-1 -0.1 0'
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp massfrac0 massfrac1'
number_fluid_phases = 1
number_fluid_components = 3
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1.5
density0 = 1
thermal_expansion = 0
viscosity = 1
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac0 massfrac1'
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 2 0 0 0 3'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[]
[Preconditioning]
active = check
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000'
[]
[check]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -snes_type'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000 test'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
[Outputs]
exodus = false
[]
(modules/porous_flow/test/tests/poro_elasticity/terzaghi_constM.i)
# Terzaghi's problem of consolodation of a drained medium
#
# A saturated soil sample sits in a bath of water.
# It is constrained on its sides, and bottom.
# Its sides and bottom are also impermeable.
# Initially it is unstressed.
# A normal stress, q, is applied to the soil's top.
# The soil then slowly compresses as water is squeezed
# out from the sample from its top (the top BC for
# the porepressure is porepressure = 0).
#
# See, for example. Section 2.2 of the online manuscript
# Arnold Verruijt "Theory and Problems of Poroelasticity" Delft University of Technology 2013
# but note that the "sigma" in that paper is the negative
# of the stress in TensorMechanics
#
# Here are the problem's parameters, and their values:
# Soil height. h = 10
# Soil's Lame lambda. la = 2
# Soil's Lame mu, which is also the Soil's shear modulus. mu = 3
# Soil bulk modulus. K = la + 2*mu/3 = 4
# Soil confined compressibility. m = 1/(K + 4mu/3) = 0.125
# Soil bulk compliance. 1/K = 0.25
# Fluid bulk modulus. Kf = 8
# Fluid bulk compliance. 1/Kf = 0.125
# Fluid mobility (soil permeability/fluid viscosity). k = 1.5
# Soil initial porosity. phi0 = 0.1
# Biot coefficient. alpha = 0.6
# Soil initial storativity, which is the reciprocal of the initial Biot modulus. S = phi0/Kf + (alpha - phi0)(1 - alpha)/K = 0.0625
# Consolidation coefficient. c = k/(S + alpha^2 m) = 13.95348837
# Normal stress on top. q = 1
# Initial porepressure, resulting from instantaneous application of q, assuming corresponding instantaneous increase of porepressure (Note that this is calculated by MOOSE: we only need it for the analytical solution). p0 = alpha*m*q/(S + alpha^2 m) = 0.69767442
# Initial vertical displacement (down is positive), resulting from instantaneous application of q (Note this is calculated by MOOSE: we only need it for the analytical solution). uz0 = q*m*h*S/(S + alpha^2 m)
# Final vertical displacement (down in positive) (Note this is calculated by MOOSE: we only need it for the analytical solution). uzinf = q*m*h
#
# The solution for porepressure is
# P = 4*p0/\pi \sum_{k=1}^{\infty} \frac{(-1)^{k-1}}{2k-1} \cos ((2k-1)\pi z/(2h)) \exp(-(2k-1)^2 \pi^2 ct/(4 h^2))
# This series converges very slowly for ct/h^2 small, so in that domain
# P = p0 erf( (1-(z/h))/(2 \sqrt(ct/h^2)) )
#
# The degree of consolidation is defined as
# U = (uz - uz0)/(uzinf - uz0)
# where uz0 and uzinf are defined above, and
# uz = the vertical displacement of the top (down is positive)
# U = 1 - (8/\pi^2)\sum_{k=1}^{\infty} \frac{1}{(2k-1)^2} \exp(-(2k-1)^2 \pi^2 ct/(4 h^2))
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 10
xmin = -1
xmax = 1
ymin = -1
ymax = 1
zmin = 0
zmax = 10
[]
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
PorousFlowDictator = dictator
block = 0
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'porepressure disp_x disp_y disp_z'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.8
alpha = 1
[]
[]
[Variables]
[disp_x]
[]
[disp_y]
[]
[disp_z]
[]
[porepressure]
[]
[]
[BCs]
[confinex]
type = DirichletBC
variable = disp_x
value = 0
boundary = 'left right'
[]
[confiney]
type = DirichletBC
variable = disp_y
value = 0
boundary = 'bottom top'
[]
[basefixed]
type = DirichletBC
variable = disp_z
value = 0
boundary = back
[]
[topdrained]
type = DirichletBC
variable = porepressure
value = 0
boundary = front
[]
[topload]
type = NeumannBC
variable = disp_z
value = -1
boundary = front
[]
[]
[Kernels]
[grad_stress_x]
type = StressDivergenceTensors
variable = disp_x
component = 0
[]
[grad_stress_y]
type = StressDivergenceTensors
variable = disp_y
component = 1
[]
[grad_stress_z]
type = StressDivergenceTensors
variable = disp_z
component = 2
[]
[poro_x]
type = PorousFlowEffectiveStressCoupling
biot_coefficient = 0.6
variable = disp_x
component = 0
[]
[poro_y]
type = PorousFlowEffectiveStressCoupling
biot_coefficient = 0.6
variable = disp_y
component = 1
[]
[poro_z]
type = PorousFlowEffectiveStressCoupling
biot_coefficient = 0.6
component = 2
variable = disp_z
[]
[poro_vol_exp]
type = PorousFlowMassVolumetricExpansion
variable = porepressure
fluid_component = 0
[]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = porepressure
[]
[flux]
type = PorousFlowAdvectiveFlux
variable = porepressure
gravity = '0 0 0'
fluid_component = 0
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 8
density0 = 1
thermal_expansion = 0
viscosity = 0.96
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[elasticity_tensor]
type = ComputeElasticityTensor
C_ijkl = '2 3'
# bulk modulus is lambda + 2*mu/3 = 2 + 2*3/3 = 4
fill_method = symmetric_isotropic
[]
[strain]
type = ComputeSmallStrain
[]
[stress]
type = ComputeLinearElasticStress
[]
[eff_fluid_pressure]
type = PorousFlowEffectiveFluidPressure
[]
[vol_strain]
type = PorousFlowVolumetricStrain
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = porepressure
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityHMBiotModulus
porosity_zero = 0.1
biot_coefficient = 0.6
solid_bulk = 4
constant_fluid_bulk_modulus = 8
constant_biot_modulus = 16
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1.5 0 0 0 1.5 0 0 0 1.5'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 0 # unimportant in this fully-saturated situation
phase = 0
[]
[]
[Postprocessors]
[p0]
type = PointValue
outputs = csv
point = '0 0 0'
variable = porepressure
use_displaced_mesh = false
[]
[p1]
type = PointValue
outputs = csv
point = '0 0 1'
variable = porepressure
use_displaced_mesh = false
[]
[p2]
type = PointValue
outputs = csv
point = '0 0 2'
variable = porepressure
use_displaced_mesh = false
[]
[p3]
type = PointValue
outputs = csv
point = '0 0 3'
variable = porepressure
use_displaced_mesh = false
[]
[p4]
type = PointValue
outputs = csv
point = '0 0 4'
variable = porepressure
use_displaced_mesh = false
[]
[p5]
type = PointValue
outputs = csv
point = '0 0 5'
variable = porepressure
use_displaced_mesh = false
[]
[p6]
type = PointValue
outputs = csv
point = '0 0 6'
variable = porepressure
use_displaced_mesh = false
[]
[p7]
type = PointValue
outputs = csv
point = '0 0 7'
variable = porepressure
use_displaced_mesh = false
[]
[p8]
type = PointValue
outputs = csv
point = '0 0 8'
variable = porepressure
use_displaced_mesh = false
[]
[p9]
type = PointValue
outputs = csv
point = '0 0 9'
variable = porepressure
use_displaced_mesh = false
[]
[p99]
type = PointValue
outputs = csv
point = '0 0 10'
variable = porepressure
use_displaced_mesh = false
[]
[zdisp]
type = PointValue
outputs = csv
point = '0 0 10'
variable = disp_z
use_displaced_mesh = false
[]
[dt]
type = FunctionValuePostprocessor
outputs = console
function = if(0.5*t<0.1,0.5*t,0.1)
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = Newton
start_time = 0
end_time = 10
[TimeStepper]
type = PostprocessorDT
postprocessor = dt
dt = 0.0001
[]
[]
[Outputs]
execute_on = 'timestep_end'
file_base = terzaghi_constM
[csv]
type = CSV
[]
[]
(modules/porous_flow/test/tests/poro_elasticity/pp_generation.i)
# A sample is constrained on all sides and its boundaries are
# also impermeable. Fluid is pumped into the sample via a
# volumetric source (ie kg/second per cubic meter), and the
# rise in porepressure is observed.
#
# Source = s (units = kg/m^3/second)
#
# Expect:
# fluid_mass = mass0 + s*t
# stress = 0 (remember this is effective stress)
# Porepressure = fluid_bulk*log(fluid_mass_density/density_P0), where fluid_mass_density = fluid_mass*porosity
# porosity = biot+(phi0-biot)*exp(pp(biot-1)/solid_bulk)
#
# Parameters:
# Biot coefficient = 0.3
# Phi0 = 0.1
# Solid Bulk modulus = 2
# fluid_bulk = 13
# density_P0 = 1
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 1
xmin = -0.5
xmax = 0.5
ymin = -0.5
ymax = 0.5
zmin = -0.5
zmax = 0.5
[]
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
PorousFlowDictator = dictator
block = 0
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'porepressure disp_x disp_y disp_z'
number_fluid_phases = 1
number_fluid_components = 1
[]
[]
[Variables]
[disp_x]
[]
[disp_y]
[]
[disp_z]
[]
[porepressure]
[]
[]
[BCs]
[confinex]
type = DirichletBC
variable = disp_x
value = 0
boundary = 'left right'
[]
[confiney]
type = DirichletBC
variable = disp_y
value = 0
boundary = 'bottom top'
[]
[confinez]
type = DirichletBC
variable = disp_z
value = 0
boundary = 'back front'
[]
[]
[Kernels]
[grad_stress_x]
type = StressDivergenceTensors
variable = disp_x
component = 0
[]
[grad_stress_y]
type = StressDivergenceTensors
variable = disp_y
component = 1
[]
[grad_stress_z]
type = StressDivergenceTensors
variable = disp_z
component = 2
[]
[poro_x]
type = PorousFlowEffectiveStressCoupling
biot_coefficient = 0.3
variable = disp_x
component = 0
[]
[poro_y]
type = PorousFlowEffectiveStressCoupling
biot_coefficient = 0.3
variable = disp_y
component = 1
[]
[poro_z]
type = PorousFlowEffectiveStressCoupling
biot_coefficient = 0.3
component = 2
variable = disp_z
[]
[poro_vol_exp]
type = PorousFlowMassVolumetricExpansion
variable = porepressure
fluid_component = 0
[]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = porepressure
[]
[flux]
type = PorousFlowAdvectiveFlux
variable = porepressure
gravity = '0 0 0'
fluid_component = 0
[]
[source]
type = BodyForce
function = 0.1
variable = porepressure
[]
[]
[AuxVariables]
[stress_xx]
order = CONSTANT
family = MONOMIAL
[]
[stress_xy]
order = CONSTANT
family = MONOMIAL
[]
[stress_xz]
order = CONSTANT
family = MONOMIAL
[]
[stress_yy]
order = CONSTANT
family = MONOMIAL
[]
[stress_yz]
order = CONSTANT
family = MONOMIAL
[]
[stress_zz]
order = CONSTANT
family = MONOMIAL
[]
[porosity]
order = CONSTANT
family = MONOMIAL
[]
[]
[AuxKernels]
[stress_xx]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xx
index_i = 0
index_j = 0
[]
[stress_xy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xy
index_i = 0
index_j = 1
[]
[stress_xz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xz
index_i = 0
index_j = 2
[]
[stress_yy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yy
index_i = 1
index_j = 1
[]
[stress_yz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yz
index_i = 1
index_j = 2
[]
[stress_zz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_zz
index_i = 2
index_j = 2
[]
[porosity]
type = PorousFlowPropertyAux
variable = porosity
property = porosity
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 13
density0 = 1
thermal_expansion = 0
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[elasticity_tensor]
type = ComputeElasticityTensor
C_ijkl = '1 1.5'
# bulk modulus is lambda + 2*mu/3 = 1 + 2*1.5/3 = 2
fill_method = symmetric_isotropic
[]
[strain]
type = ComputeSmallStrain
[]
[stress]
type = ComputeLinearElasticStress
[]
[eff_fluid_pressure]
type = PorousFlowEffectiveFluidPressure
[]
[vol_strain]
type = PorousFlowVolumetricStrain
[]
[ppss]
type = PorousFlow1PhaseFullySaturated
porepressure = porepressure
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosity
fluid = true
mechanical = true
porosity_zero = 0.1
biot_coefficient = 0.3
solid_bulk = 2
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 1 0 0 0 1' # unimportant
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 0 # unimportant in this fully-saturated situation
phase = 0
[]
[]
[Functions]
[porosity_analytic]
type = ParsedFunction
expression = 'biot+(phi0-biot)*exp(pp*(biot-1)/bulk)'
symbol_names = 'biot phi0 pp bulk'
symbol_values = '0.3 0.1 p0 2'
[]
[]
[Postprocessors]
[fluid_mass]
type = PorousFlowFluidMass
fluid_component = 0
execute_on = 'initial timestep_end'
[]
[porosity]
type = PointValue
outputs = 'console csv'
point = '0 0 0'
variable = porosity
[]
[p0]
type = PointValue
outputs = csv
point = '0 0 0'
variable = porepressure
[]
[porosity_analytic]
type = FunctionValuePostprocessor
function = porosity_analytic
[]
[zdisp]
type = PointValue
outputs = csv
point = '0 0 0.5'
variable = disp_z
[]
[stress_xx]
type = PointValue
outputs = csv
point = '0 0 0'
variable = stress_xx
[]
[stress_yy]
type = PointValue
outputs = csv
point = '0 0 0'
variable = stress_yy
[]
[stress_zz]
type = PointValue
outputs = csv
point = '0 0 0'
variable = stress_zz
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_max_it -snes_stol'
petsc_options_value = 'bcgs bjacobi 10000 1E-11'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
start_time = 0
end_time = 10
dt = 1
[]
[Outputs]
execute_on = 'timestep_end'
file_base = pp_generation
[csv]
type = CSV
[]
[]
(modules/porous_flow/test/tests/jacobian/brineco2_twophase.i)
# Tests correct calculation of properties derivatives in PorousFlowFluidState
# for conditions that are appropriate for two phases
[Mesh]
type = GeneratedMesh
dim = 2
nx = 2
ny = 2
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[AuxVariables]
[xnacl]
initial_condition = 0.05
[]
[]
[Variables]
[pgas]
[]
[zi]
[]
[]
[ICs]
[pgas]
type = RandomIC
min = 1e6
max = 4e6
variable = pgas
seed = 1
[]
[z]
type = RandomIC
min = 0.2
max = 0.8
variable = zi
seed = 2
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
variable = pgas
fluid_component = 0
[]
[mass1]
type = PorousFlowMassTimeDerivative
variable = zi
fluid_component = 1
[]
[adv0]
type = PorousFlowAdvectiveFlux
variable = pgas
fluid_component = 0
[]
[adv1]
type = PorousFlowAdvectiveFlux
variable = zi
fluid_component = 1
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pgas zi'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1e1
pc_max = 1e4
[]
[fs]
type = PorousFlowBrineCO2
brine_fp = brine
co2_fp = co2
capillary_pressure = pc
[]
[]
[FluidProperties]
[co2]
type = CO2FluidProperties
[]
[brine]
type = BrineFluidProperties
[]
[water]
type = Water97FluidProperties
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = 50
[]
[brineco2]
type = PorousFlowFluidState
gas_porepressure = pgas
z = zi
temperature_unit = Celsius
xnacl = xnacl
capillary_pressure = pc
fluid_state = fs
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-12 0 0 0 1e-12 0 0 0 1e-12'
[]
[relperm0]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[relperm1]
type = PorousFlowRelativePermeabilityCorey
n = 3
phase = 1
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[]
[Executioner]
type = Transient
solve_type = NEWTON
dt = 1
end_time = 1
nl_abs_tol = 1e-12
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[AuxVariables]
[sgas]
family = MONOMIAL
order = CONSTANT
[]
[]
[AuxKernels]
[sgas]
type = PorousFlowPropertyAux
property = saturation
phase = 1
variable = sgas
[]
[]
[Postprocessors]
[sgas_min]
type = ElementExtremeValue
variable = sgas
value_type = min
[]
[sgas_max]
type = ElementExtremeValue
variable = sgas
value_type = max
[]
[]
(modules/porous_flow/test/tests/fluidstate/theis_nonisothermal.i)
# Two-phase nonisothermal Theis problem: Flow from single source using WaterNCG fluidstate.
# Constant rate injection 2 kg/s of cold gas into warm reservoir
# 1D cylindrical mesh
# Initially, system has only a liquid phase, until enough gas is injected
# to form a gas phase, in which case the system becomes two phase.
[Mesh]
[mesh]
type = GeneratedMeshGenerator
dim = 1
nx = 40
xmin = 0.1
xmax = 200
bias_x = 1.05
[]
coord_type = RZ
rz_coord_axis = Y
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[AuxVariables]
[saturation_gas]
order = CONSTANT
family = MONOMIAL
[]
[x1]
order = CONSTANT
family = MONOMIAL
[]
[y0]
order = CONSTANT
family = MONOMIAL
[]
[]
[AuxKernels]
[saturation_gas]
type = PorousFlowPropertyAux
variable = saturation_gas
property = saturation
phase = 1
execute_on = timestep_end
[]
[x1]
type = PorousFlowPropertyAux
variable = x1
property = mass_fraction
phase = 0
fluid_component = 1
execute_on = timestep_end
[]
[y0]
type = PorousFlowPropertyAux
variable = y0
property = mass_fraction
phase = 1
fluid_component = 0
execute_on = timestep_end
[]
[]
[Variables]
[pgas]
initial_condition = 20e6
[]
[zi]
initial_condition = 0
[]
[temperature]
initial_condition = 70
scaling = 1e-4
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pgas
[]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = pgas
[]
[mass1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = zi
[]
[flux1]
type = PorousFlowAdvectiveFlux
fluid_component = 1
variable = zi
[]
[energy]
type = PorousFlowEnergyTimeDerivative
variable = temperature
[]
[heatadv]
type = PorousFlowHeatAdvection
variable = temperature
[]
[conduction]
type = PorousFlowHeatConduction
variable = temperature
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pgas zi temperature'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureConst
pc = 0
[]
[fs]
type = PorousFlowWaterNCG
water_fp = water
gas_fp = methane
capillary_pressure = pc
[]
[]
[FluidProperties]
[methane]
type = MethaneFluidProperties
[]
[water]
type = Water97FluidProperties
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = temperature
[]
[waterncg]
type = PorousFlowFluidState
gas_porepressure = pgas
z = zi
temperature = temperature
temperature_unit = Celsius
capillary_pressure = pc
fluid_state = fs
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.2
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-12 0 0 0 1e-12 0 0 0 1e-12'
[]
[relperm_water]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
s_res = 0.1
sum_s_res = 0.1
[]
[relperm_gas]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 1
[]
[rockheat]
type = PorousFlowMatrixInternalEnergy
specific_heat_capacity = 1000
density = 2500
[]
[rock_thermal_conductivity]
type = PorousFlowThermalConductivityIdeal
dry_thermal_conductivity = '50 0 0 0 50 0 0 0 50'
[]
[]
[BCs]
[cold_gas]
type = DirichletBC
boundary = left
variable = temperature
value = 20
[]
[gas_injecton]
type = PorousFlowSink
boundary = left
variable = zi
flux_function = -0.159155
[]
[rightwater]
type = DirichletBC
boundary = right
value = 20e6
variable = pgas
[]
[righttemp]
type = DirichletBC
boundary = right
value = 70
variable = temperature
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -sub_pc_type -sub_pc_factor_shift_type -pc_asm_overlap'
petsc_options_value = 'gmres asm lu NONZERO 2'
[]
[]
[Executioner]
type = Transient
solve_type = NEWTON
end_time = 1e4
nl_abs_tol = 1e-7
nl_rel_tol = 1e-5
[TimeStepper]
type = IterationAdaptiveDT
dt = 1
growth_factor = 1.5
[]
[]
[Postprocessors]
[pgas]
type = PointValue
point = '2 0 0'
variable = pgas
[]
[sgas]
type = PointValue
point = '2 0 0'
variable = saturation_gas
[]
[zi]
type = PointValue
point = '2 0 0'
variable = zi
[]
[temperature]
type = PointValue
point = '2 0 0'
variable = temperature
[]
[massgas]
type = PorousFlowFluidMass
fluid_component = 1
[]
[x1]
type = PointValue
point = '2 0 0'
variable = x1
[]
[y0]
type = PointValue
point = '2 0 0'
variable = y0
[]
[]
[Outputs]
print_linear_residuals = false
perf_graph = true
csv = true
[]
(modules/porous_flow/test/tests/heterogeneous_materials/constant_poroperm_fv.i)
# Assign porosity and permeability variables from constant AuxVariables to create
# a heterogeneous model and solve with FV variables
[Mesh]
[mesh]
type = GeneratedMeshGenerator
dim = 3
nx = 3
ny = 3
nz = 3
xmax = 3
ymax = 3
zmax = 3
[]
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 -10'
[]
[Variables]
[ppwater]
type = MooseVariableFVReal
initial_condition = 1.5e6
[]
[]
[AuxVariables]
[poro]
type = MooseVariableFVReal
[]
[permxx]
type = MooseVariableFVReal
[]
[permxy]
type = MooseVariableFVReal
[]
[permxz]
type = MooseVariableFVReal
[]
[permyx]
type = MooseVariableFVReal
[]
[permyy]
type = MooseVariableFVReal
[]
[permyz]
type = MooseVariableFVReal
[]
[permzx]
type = MooseVariableFVReal
[]
[permzy]
type = MooseVariableFVReal
[]
[permzz]
type = MooseVariableFVReal
[]
[poromat]
family = MONOMIAL
order = CONSTANT
[]
[permxxmat]
family = MONOMIAL
order = CONSTANT
[]
[permxymat]
family = MONOMIAL
order = CONSTANT
[]
[permxzmat]
family = MONOMIAL
order = CONSTANT
[]
[permyxmat]
family = MONOMIAL
order = CONSTANT
[]
[permyymat]
family = MONOMIAL
order = CONSTANT
[]
[permyzmat]
family = MONOMIAL
order = CONSTANT
[]
[permzxmat]
family = MONOMIAL
order = CONSTANT
[]
[permzymat]
family = MONOMIAL
order = CONSTANT
[]
[permzzmat]
family = MONOMIAL
order = CONSTANT
[]
[]
[AuxKernels]
[poromat]
type = ADPorousFlowPropertyAux
property = porosity
variable = poromat
[]
[permxxmat]
type = ADPorousFlowPropertyAux
property = permeability
variable = permxxmat
column = 0
row = 0
[]
[permxymat]
type = ADPorousFlowPropertyAux
property = permeability
variable = permxymat
column = 1
row = 0
[]
[permxzmat]
type = ADPorousFlowPropertyAux
property = permeability
variable = permxzmat
column = 2
row = 0
[]
[permyxmat]
type = ADPorousFlowPropertyAux
property = permeability
variable = permyxmat
column = 0
row = 1
[]
[permyymat]
type = ADPorousFlowPropertyAux
property = permeability
variable = permyymat
column = 1
row = 1
[]
[permyzmat]
type = ADPorousFlowPropertyAux
property = permeability
variable = permyzmat
column = 2
row = 1
[]
[permzxmat]
type = ADPorousFlowPropertyAux
property = permeability
variable = permzxmat
column = 0
row = 2
[]
[permzymat]
type = ADPorousFlowPropertyAux
property = permeability
variable = permzymat
column = 1
row = 2
[]
[permzzmat]
type = ADPorousFlowPropertyAux
property = permeability
variable = permzzmat
column = 2
row = 2
[]
[]
[ICs]
[poro]
type = RandomIC
seed = 0
variable = poro
max = 0.5
min = 0.1
[]
[permx]
type = FunctionIC
function = permx
variable = permxx
[]
[permy]
type = FunctionIC
function = permy
variable = permyy
[]
[permz]
type = FunctionIC
function = permz
variable = permzz
[]
[]
[Functions]
[permx]
type = ParsedFunction
expression = '(1+x)*1e-11'
[]
[permy]
type = ParsedFunction
expression = '(1+y)*1e-11'
[]
[permz]
type = ParsedFunction
expression = '(1+z)*1e-11'
[]
[]
[FVKernels]
[mass0]
type = FVPorousFlowMassTimeDerivative
variable = ppwater
[]
[flux0]
type = FVPorousFlowAdvectiveFlux
variable = ppwater
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'ppwater'
number_fluid_phases = 1
number_fluid_components = 1
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e9
density0 = 1000
viscosity = 1e-3
thermal_expansion = 0
cv = 2
[]
[]
[Materials]
[temperature]
type = ADPorousFlowTemperature
[]
[ppss]
type = ADPorousFlow1PhaseFullySaturated
porepressure = ppwater
[]
[massfrac]
type = ADPorousFlowMassFraction
[]
[simple_fluid]
type = ADPorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = ADPorousFlowPorosityConst
porosity = poro
[]
[permeability]
type = ADPorousFlowPermeabilityConstFromVar
perm_xx = permxx
perm_yy = permyy
perm_zz = permzz
[]
[relperm_water]
type = ADPorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[]
[Postprocessors]
[mass_ph0]
type = FVPorousFlowFluidMass
fluid_component = 0
execute_on = 'initial timestep_end'
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = Newton
end_time = 100
dt = 100
[]
[Outputs]
execute_on = 'initial timestep_end'
exodus = true
perf_graph = true
[]
(modules/porous_flow/test/tests/gravity/grav02c.i)
# Checking that gravity head is established in the transient situation when 0<=saturation<=1 (note the less-than-or-equal-to).
# 2phase (PP), 2components, vanGenuchten, constant fluid bulk-moduli for each phase, constant viscosity, constant permeability, Corey relative perm
# For better agreement with the analytical solution (ana_pp), just increase nx
[Mesh]
type = GeneratedMesh
dim = 1
nx = 10
xmin = -1
xmax = 0
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Functions]
[dts]
type = PiecewiseLinear
y = '1E-3 1E-2 1E-1'
x = '1E-3 1E-2 1E-1'
[]
[]
[Variables]
[ppwater]
initial_condition = -0.1
[]
[ppgas]
initial_condition = 0
[]
[]
[AuxVariables]
[massfrac_ph0_sp0]
initial_condition = 1
[]
[massfrac_ph1_sp0]
initial_condition = 0
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = ppwater
[]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = ppwater
gravity = '-1 0 0'
[]
[mass1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = ppgas
[]
[flux1]
type = PorousFlowAdvectiveFlux
fluid_component = 1
variable = ppgas
gravity = '-1 0 0'
[]
[]
[Functions]
[ana_ppwater]
type = ParsedFunction
symbol_names = 'g B p0 rho0'
symbol_values = '1 2 pp_water_top 1'
expression = '-B*log(exp(-p0/B)+g*rho0*x/B)' # expected pp at base
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'ppwater ppgas'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 2
density0 = 1
viscosity = 1
thermal_expansion = 0
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 1
density0 = 0.1
viscosity = 0.5
thermal_expansion = 0
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePP
phase0_porepressure = ppwater
phase1_porepressure = ppgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph1_sp0'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 2 0 0 0 3'
[]
[relperm_water]
type = PorousFlowRelativePermeabilityCorey
n = 1
phase = 0
[]
[relperm_gas]
type = PorousFlowRelativePermeabilityCorey
n = 1
phase = 1
[]
[]
[Postprocessors]
[pp_water_top]
type = PointValue
variable = ppwater
point = '0 0 0'
[]
[pp_water_base]
type = PointValue
variable = ppwater
point = '-1 0 0'
[]
[pp_water_analytical]
type = FunctionValuePostprocessor
function = ana_ppwater
point = '-1 0 0'
[]
[mass_ph0]
type = PorousFlowFluidMass
fluid_component = 0
execute_on = 'initial timestep_end'
[]
[mass_ph1]
type = PorousFlowFluidMass
fluid_component = 1
execute_on = 'initial timestep_end'
[]
[]
[Preconditioning]
active = andy
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'bcgs bjacobi 1E-12 1E-10 10000'
[]
[check]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -snes_type'
petsc_options_value = 'bcgs bjacobi 1E-12 1E-10 10000 test'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
[TimeStepper]
type = FunctionDT
function = dts
[]
end_time = 1.0
[]
[Outputs]
execute_on = 'initial timestep_end'
file_base = grav02c
[csv]
type = CSV
[]
exodus = true
[]
(modules/porous_flow/test/tests/capillary_pressure/vangenuchten3.i)
# Test van Genuchten relative permeability curve by varying saturation over the mesh
# van Genuchten exponent m = 0.5 for both phases
# No residual saturation in either phase
[Mesh]
type = GeneratedMesh
dim = 1
nx = 500
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[p0]
initial_condition = 1e6
[]
[s1]
[]
[]
[AuxVariables]
[s0aux]
family = MONOMIAL
order = CONSTANT
[]
[s1aux]
family = MONOMIAL
order = CONSTANT
[]
[p0aux]
family = MONOMIAL
order = CONSTANT
[]
[p1aux]
family = MONOMIAL
order = CONSTANT
[]
[]
[AuxKernels]
[s0]
type = PorousFlowPropertyAux
property = saturation
phase = 0
variable = s0aux
[]
[s1]
type = PorousFlowPropertyAux
property = saturation
phase = 1
variable = s1aux
[]
[p0]
type = PorousFlowPropertyAux
property = pressure
phase = 0
variable = p0aux
[]
[p1]
type = PorousFlowPropertyAux
property = pressure
phase = 1
variable = p1aux
[]
[]
[Functions]
[s1]
type = ParsedFunction
expression = x
[]
[]
[ICs]
[s1]
type = FunctionIC
variable = s1
function = s1
[]
[]
[Kernels]
[p0]
type = Diffusion
variable = p0
[]
[s1]
type = Diffusion
variable = s1
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'p0 s1'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
alpha = 1e-5
m = 0.5
sat_lr = 0.1
s_scale = 0.8
log_extension = false
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePS
phase0_porepressure = p0
phase1_saturation = s1
capillary_pressure = pc
[]
[kr0]
type = PorousFlowRelativePermeabilityVG
phase = 0
m = 0.5
[]
[kr1]
type = PorousFlowRelativePermeabilityCorey
phase = 1
n = 2
[]
[]
[VectorPostprocessors]
[vpp]
type = LineValueSampler
variable = 's0aux s1aux p0aux p1aux'
start_point = '0 0 0'
end_point = '1 0 0'
num_points = 500
sort_by = id
[]
[]
[Executioner]
type = Steady
solve_type = NEWTON
nl_abs_tol = 1e-6
[]
[BCs]
[sleft]
type = DirichletBC
variable = s1
value = 0
boundary = left
[]
[sright]
type = DirichletBC
variable = s1
value = 1
boundary = right
[]
[]
[Outputs]
csv = true
execute_on = timestep_end
[]
(modules/porous_flow/test/tests/fluidstate/waterncg_ic.i)
# Tests correct calculation of z (total mass fraction of NCG summed over all
# phases) using the PorousFlowFluidStateIC initial condition. Once z is
# calculated by the initial condition, the thermophysical properties are calculated
# and the resulting gas saturation should be equal to that given in the intial condition
[Mesh]
type = GeneratedMesh
dim = 2
[]
[GlobalParams]
PorousFlowDictator = dictator
temperature_unit = Celsius
[]
[Variables]
[pgas]
initial_condition = 1e6
[]
[z]
[]
[]
[ICs]
[z]
type = PorousFlowFluidStateIC
saturation = 0.5
gas_porepressure = pgas
temperature = 50
variable = z
fluid_state = fs
[]
[]
[AuxVariables]
[saturation_gas]
order = CONSTANT
family = MONOMIAL
[]
[saturation_water]
order = CONSTANT
family = MONOMIAL
[]
[]
[AuxKernels]
[saturation_water]
type = PorousFlowPropertyAux
variable = saturation_water
property = saturation
phase = 0
execute_on = timestep_end
[]
[saturation_gas]
type = PorousFlowPropertyAux
variable = saturation_gas
property = saturation
phase = 1
execute_on = timestep_end
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
variable = pgas
fluid_component = 0
[]
[mass1]
type = PorousFlowMassTimeDerivative
variable = z
fluid_component = 1
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pgas z'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureConst
pc = 0
[]
[fs]
type = PorousFlowWaterNCG
water_fp = water
gas_fp = co2
capillary_pressure = pc
[]
[]
[FluidProperties]
[co2]
type = CO2FluidProperties
[]
[water]
type = Water97FluidProperties
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = 50
[]
[waterncg]
type = PorousFlowFluidState
gas_porepressure = pgas
z = z
fluid_state = fs
capillary_pressure = pc
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-12 0 0 0 1e-12 0 0 0 1e-12'
[]
[relperm0]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[relperm1]
type = PorousFlowRelativePermeabilityCorey
n = 3
phase = 1
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[]
[Executioner]
type = Transient
solve_type = NEWTON
dt = 1
end_time = 1
nl_abs_tol = 1e-12
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Postprocessors]
[sg]
type = ElementIntegralVariablePostprocessor
variable = saturation_gas
execute_on = 'initial timestep_end'
[]
[sw]
type = ElementIntegralVariablePostprocessor
variable = saturation_water
execute_on = 'initial timestep_end'
[]
[z]
type = ElementIntegralVariablePostprocessor
variable = z
execute_on = 'initial timestep_end'
[]
[]
[Outputs]
csv = true
[]
(modules/porous_flow/test/tests/relperm/corey4.i)
# Test Corey relative permeability curve by varying saturation over the mesh
# Residual saturation of phase 0: s0r = 0.2
# Residual saturation of phase 1: s1r = 0.3
[Mesh]
type = GeneratedMesh
dim = 1
nx = 20
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[p0]
initial_condition = 1e6
[]
[s1]
family = LAGRANGE
order = FIRST
[]
[]
[AuxVariables]
[s0aux]
family = MONOMIAL
order = CONSTANT
[]
[s1aux]
family = MONOMIAL
order = CONSTANT
[]
[kr0aux]
family = MONOMIAL
order = CONSTANT
[]
[kr1aux]
family = MONOMIAL
order = CONSTANT
[]
[]
[AuxKernels]
[s0]
type = PorousFlowPropertyAux
property = saturation
phase = 0
variable = s0aux
[]
[s1]
type = PorousFlowPropertyAux
property = saturation
phase = 1
variable = s1aux
[]
[kr0]
type = PorousFlowPropertyAux
property = relperm
phase = 0
variable = kr0aux
[]
[kr1]
type = PorousFlowPropertyAux
property = relperm
phase = 1
variable = kr1aux
[]
[]
[Functions]
[s1]
type = ParsedFunction
expression = x
[]
[]
[ICs]
[s1]
type = FunctionIC
variable = s1
function = s1
[]
[]
[Kernels]
[p0]
type = Diffusion
variable = p0
[]
[s1]
type = Diffusion
variable = s1
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'p0 s1'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureConst
pc = 0
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePS
phase0_porepressure = p0
phase1_saturation = s1
capillary_pressure = pc
[]
[kr0]
type = PorousFlowRelativePermeabilityCorey
scaling = 0.1
phase = 0
n = 2
s_res = 0.2
sum_s_res = 0.5
[]
[kr1]
type = PorousFlowRelativePermeabilityCorey
scaling = 10.0
phase = 1
n = 2
s_res = 0.3
sum_s_res = 0.5
[]
[]
[VectorPostprocessors]
[vpp]
type = LineValueSampler
warn_discontinuous_face_values = false
variable = 's0aux s1aux kr0aux kr1aux'
start_point = '0 0 0'
end_point = '1 0 0'
num_points = 20
sort_by = id
[]
[]
[Executioner]
type = Steady
solve_type = NEWTON
nl_abs_tol = 1e-8
[]
[BCs]
[sleft]
type = DirichletBC
variable = s1
value = 0
boundary = left
[]
[sright]
type = DirichletBC
variable = s1
value = 1
boundary = right
[]
[]
[Outputs]
csv = true
execute_on = timestep_end
[]
(modules/porous_flow/test/tests/pressure_pulse/pressure_pulse_1d_2phase_fv.i)
# Pressure pulse in 1D with 2 phases (with one having zero saturation), 2components - transient using FV
[Mesh]
[mesh]
type = GeneratedMeshGenerator
dim = 1
nx = 10
xmin = 0
xmax = 100
[]
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[ppwater]
type = MooseVariableFVReal
initial_condition = 2E6
[]
[ppgas]
type = MooseVariableFVReal
initial_condition = 2E6
[]
[]
[AuxVariables]
[massfrac_ph0_sp0]
type = MooseVariableFVReal
initial_condition = 1
[]
[massfrac_ph1_sp0]
type = MooseVariableFVReal
initial_condition = 0
[]
[]
[FVKernels]
[mass0]
type = FVPorousFlowMassTimeDerivative
fluid_component = 0
variable = ppwater
[]
[flux0]
type = FVPorousFlowAdvectiveFlux
variable = ppwater
gravity = '0 0 0'
fluid_component = 0
[]
[mass1]
type = FVPorousFlowMassTimeDerivative
fluid_component = 1
variable = ppgas
[]
[flux1]
type = FVPorousFlowAdvectiveFlux
variable = ppgas
gravity = '0 0 0'
fluid_component = 1
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'ppwater ppgas'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 2e9
density0 = 1000
thermal_expansion = 0
viscosity = 1e-3
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 2e6
density0 = 1
thermal_expansion = 0
viscosity = 1e-5
[]
[]
[Materials]
[temperature]
type = ADPorousFlowTemperature
[]
[ppss]
type = ADPorousFlow2PhasePP
phase0_porepressure = ppwater
phase1_porepressure = ppgas
capillary_pressure = pc
[]
[massfrac]
type = ADPorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph1_sp0'
[]
[simple_fluid0]
type = ADPorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = ADPorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[porosity]
type = ADPorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = ADPorousFlowPermeabilityConst
permeability = '1E-15 0 0 0 1E-15 0 0 0 1E-15'
[]
[relperm_water]
type = ADPorousFlowRelativePermeabilityCorey
n = 1
phase = 0
[]
[relperm_gas]
type = ADPorousFlowRelativePermeabilityCorey
n = 1
phase = 1
[]
[]
[FVBCs]
[leftwater]
type = FVDirichletBC
boundary = left
value = 3E6
variable = ppwater
[]
[leftgas]
type = FVDirichletBC
boundary = left
value = 3E6
variable = ppgas
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -sub_pc_type -sub_pc_factor_shift_type -pc_asm_overlap -snes_atol'
petsc_options_value = 'gmres asm lu NONZERO 2 1E-12'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1E3
end_time = 1E4
[]
[Postprocessors]
[p005]
type = PointValue
variable = ppwater
point = '5 0 0'
execute_on = 'initial timestep_end'
[]
[p015]
type = PointValue
variable = ppwater
point = '15 0 0'
execute_on = 'initial timestep_end'
[]
[p025]
type = PointValue
variable = ppwater
point = '25 0 0'
execute_on = 'initial timestep_end'
[]
[p035]
type = PointValue
variable = ppwater
point = '35 0 0'
execute_on = 'initial timestep_end'
[]
[p045]
type = PointValue
variable = ppwater
point = '45 0 0'
execute_on = 'initial timestep_end'
[]
[p055]
type = PointValue
variable = ppwater
point = '55 0 0'
execute_on = 'initial timestep_end'
[]
[p065]
type = PointValue
variable = ppwater
point = '65 0 0'
execute_on = 'initial timestep_end'
[]
[p075]
type = PointValue
variable = ppwater
point = '75 0 0'
execute_on = 'initial timestep_end'
[]
[p085]
type = PointValue
variable = ppwater
point = '85 0 0'
execute_on = 'initial timestep_end'
[]
[p095]
type = PointValue
variable = ppwater
point = '95 0 0'
execute_on = 'initial timestep_end'
[]
[]
[Outputs]
file_base = pressure_pulse_1d_2phase_fv
print_linear_residuals = false
csv = true
[]
(modules/porous_flow/test/tests/fluidstate/theis.i)
# Two phase Theis problem: Flow from single source using WaterNCG fluidstate.
# Constant rate injection 2 kg/s
# 1D cylindrical mesh
# Initially, system has only a liquid phase, until enough gas is injected
# to form a gas phase, in which case the system becomes two phase.
[Mesh]
type = GeneratedMesh
dim = 1
nx = 40
xmax = 200
bias_x = 1.05
coord_type = RZ
rz_coord_axis = Y
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[AuxVariables]
[saturation_gas]
order = CONSTANT
family = MONOMIAL
[]
[x1]
order = CONSTANT
family = MONOMIAL
[]
[y0]
order = CONSTANT
family = MONOMIAL
[]
[]
[AuxKernels]
[saturation_gas]
type = PorousFlowPropertyAux
variable = saturation_gas
property = saturation
phase = 1
execute_on = timestep_end
[]
[x1]
type = PorousFlowPropertyAux
variable = x1
property = mass_fraction
phase = 0
fluid_component = 1
execute_on = timestep_end
[]
[y0]
type = PorousFlowPropertyAux
variable = y0
property = mass_fraction
phase = 1
fluid_component = 0
execute_on = timestep_end
[]
[]
[Variables]
[pgas]
initial_condition = 20e6
[]
[zi]
initial_condition = 0
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pgas
[]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = pgas
[]
[mass1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = zi
[]
[flux1]
type = PorousFlowAdvectiveFlux
fluid_component = 1
variable = zi
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pgas zi'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureConst
pc = 0
[]
[fs]
type = PorousFlowWaterNCG
water_fp = water
gas_fp = co2
capillary_pressure = pc
[]
[]
[FluidProperties]
[co2]
type = CO2FluidProperties
[]
[water]
type = Water97FluidProperties
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = 20
[]
[waterncg]
type = PorousFlowFluidState
gas_porepressure = pgas
z = zi
temperature_unit = Celsius
capillary_pressure = pc
fluid_state = fs
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.2
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-12 0 0 0 1e-12 0 0 0 1e-12'
[]
[relperm_water]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
s_res = 0.1
sum_s_res = 0.1
[]
[relperm_gas]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 1
[]
[]
[BCs]
[rightwater]
type = DirichletBC
boundary = right
value = 20e6
variable = pgas
[]
[]
[DiracKernels]
[source]
type = PorousFlowSquarePulsePointSource
point = '0 0 0'
mass_flux = 2
variable = zi
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
petsc_options = '-snes_converged_reason -ksp_diagonal_scale -ksp_diagonal_scale_fix -ksp_gmres_modifiedgramschmidt -snes_linesearch_monitor'
petsc_options_iname = '-ksp_type -pc_type -sub_pc_type -sub_pc_factor_shift_type -pc_asm_overlap -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'gmres asm lu NONZERO 2 1E-8 1E-10 20'
[]
[]
[Executioner]
type = Transient
solve_type = NEWTON
end_time = 2e2
[TimeStepper]
type = IterationAdaptiveDT
dt = 10
growth_factor = 2
[]
[]
[VectorPostprocessors]
[line]
type = NodalValueSampler
sort_by = x
variable = 'pgas zi'
execute_on = 'timestep_end'
[]
[]
[Postprocessors]
[pgas]
type = PointValue
point = '1 0 0'
variable = pgas
[]
[sgas]
type = PointValue
point = '1 0 0'
variable = saturation_gas
[]
[zi]
type = PointValue
point = '1 0 0'
variable = zi
[]
[massgas]
type = PorousFlowFluidMass
fluid_component = 1
[]
[x1]
type = PointValue
point = '1 0 0'
variable = x1
[]
[y0]
type = PointValue
point = '1 0 0'
variable = y0
[]
[]
[Outputs]
print_linear_residuals = false
perf_graph = true
[csvout]
type = CSV
execute_on = timestep_end
execute_vector_postprocessors_on = final
[]
[]
(modules/porous_flow/test/tests/sinks/s02.i)
# apply a sink flux with use_mobility=true and observe the correct behavior
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 1
xmin = 0
xmax = 1
ymin = 0
ymax = 1
zmin = 0
zmax = 2
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[Variables]
[pp]
[]
[]
[ICs]
[pp]
type = FunctionIC
variable = pp
function = y+1
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1.3
density0 = 1.1
thermal_expansion = 0
viscosity = 1.1
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '0.2 0 0 0 0.1 0 0 0 0.1'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[]
[AuxVariables]
[flux_out]
[]
[xval]
[]
[yval]
[]
[]
[ICs]
[xval]
type = FunctionIC
variable = xval
function = x
[]
[yval]
type = FunctionIC
variable = yval
function = y
[]
[]
[Functions]
[mass00]
type = ParsedFunction
expression = 'vol*por*dens0*exp(pp/bulk)'
symbol_names = 'vol por dens0 pp bulk'
symbol_values = '0.25 0.1 1.1 p00 1.3'
[]
[mass01]
type = ParsedFunction
expression = 'vol*por*dens0*exp(pp/bulk)'
symbol_names = 'vol por dens0 pp bulk'
symbol_values = '0.25 0.1 1.1 p01 1.3'
[]
[expected_mass_change00]
type = ParsedFunction
expression = 'fcn*perm*dens0*exp(pp/bulk)/visc*area*dt'
symbol_names = 'fcn perm dens0 pp bulk visc area dt'
symbol_values = '6 0.2 1.1 p00 1.3 1.1 0.5 1E-3'
[]
[expected_mass_change01]
type = ParsedFunction
expression = 'fcn*perm*dens0*exp(pp/bulk)/visc*area*dt'
symbol_names = 'fcn perm dens0 pp bulk visc area dt'
symbol_values = '6 0.2 1.1 p01 1.3 1.1 0.5 1E-3'
[]
[mass00_expect]
type = ParsedFunction
expression = 'mass_prev-mass_change'
symbol_names = 'mass_prev mass_change'
symbol_values = 'm00_prev del_m00'
[]
[mass01_expect]
type = ParsedFunction
expression = 'mass_prev-mass_change'
symbol_names = 'mass_prev mass_change'
symbol_values = 'm01_prev del_m01'
[]
[]
[Postprocessors]
[p00]
type = PointValue
point = '0 0 0'
variable = pp
execute_on = 'initial timestep_end'
[]
[m00]
type = FunctionValuePostprocessor
function = mass00
execute_on = 'initial timestep_end'
[]
[m00_prev]
type = FunctionValuePostprocessor
function = mass00
execute_on = 'timestep_begin'
outputs = 'console'
[]
[del_m00]
type = FunctionValuePostprocessor
function = expected_mass_change00
execute_on = 'timestep_end'
outputs = 'console'
[]
[m00_expect]
type = FunctionValuePostprocessor
function = mass00_expect
execute_on = 'timestep_end'
[]
[p10]
type = PointValue
point = '1 0 0'
variable = pp
execute_on = 'initial timestep_end'
[]
[p01]
type = PointValue
point = '0 1 0'
variable = pp
execute_on = 'initial timestep_end'
[]
[m01]
type = FunctionValuePostprocessor
function = mass01
execute_on = 'initial timestep_end'
[]
[m01_prev]
type = FunctionValuePostprocessor
function = mass01
execute_on = 'timestep_begin'
outputs = 'console'
[]
[del_m01]
type = FunctionValuePostprocessor
function = expected_mass_change01
execute_on = 'timestep_end'
outputs = 'console'
[]
[m01_expect]
type = FunctionValuePostprocessor
function = mass01_expect
execute_on = 'timestep_end'
[]
[p11]
type = PointValue
point = '1 1 0'
variable = pp
execute_on = 'initial timestep_end'
[]
[]
[BCs]
[flux]
type = PorousFlowSink
boundary = 'left'
variable = pp
use_mobility = true
use_relperm = true
fluid_phase = 0
flux_function = 6
save_in = flux_out
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -sub_pc_type -snes_max_it -sub_pc_factor_shift_type -pc_asm_overlap'
petsc_options_value = 'gmres asm lu 10000 NONZERO 2'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1E-3
end_time = 0.03
nl_rel_tol = 1E-12
nl_abs_tol = 1E-12
[]
[Outputs]
file_base = s02
[console]
type = Console
execute_on = 'nonlinear linear'
time_step_interval = 30
[]
[csv]
type = CSV
execute_on = 'timestep_end'
time_step_interval = 3
[]
[]
(modules/porous_flow/test/tests/fluidstate/water_vapor_phasechange.i)
# Tests correct calculation of properties in PorousFlowWaterVapor as a phase change
# from liquid to a two-phase model occurs due to a pressure drop.
# A single 10 m^3 element is used, with constant mass and heat production using
# a Dirac kernel. Initial conditions correspond to just outside the two-phase region in
# the liquid state.
#
# An identical problem can be run using TOUGH2, with the following outputs after 1,000s
# Pressure: 8.58 Mpa
# Temperature: 299.92 K
# Vapor saturation: 0.00637
[Mesh]
type = GeneratedMesh
dim = 3
xmax = 10
ymax = 10
zmax = 10
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pliq]
initial_condition = 9e6
[]
[h]
scaling = 1e-3
[]
[]
[ICs]
[hic]
type = PorousFlowFluidPropertyIC
variable = h
porepressure = pliq
property = enthalpy
temperature = 300
temperature_unit = Celsius
fp = water
[]
[]
[DiracKernels]
[mass]
type = ConstantPointSource
point = '5 5 5'
variable = pliq
value = -1
[]
[heat]
type = ConstantPointSource
point = '5 5 5'
variable = h
value = -1.344269e6
[]
[]
[AuxVariables]
[pressure_gas]
order = CONSTANT
family = MONOMIAL
[]
[pressure_water]
order = CONSTANT
family = MONOMIAL
[]
[enthalpy_gas]
order = CONSTANT
family = MONOMIAL
[]
[enthalpy_water]
order = CONSTANT
family = MONOMIAL
[]
[saturation_gas]
order = CONSTANT
family = MONOMIAL
[]
[saturation_water]
order = CONSTANT
family = MONOMIAL
[]
[density_water]
order = CONSTANT
family = MONOMIAL
[]
[density_gas]
order = CONSTANT
family = MONOMIAL
[]
[viscosity_water]
order = CONSTANT
family = MONOMIAL
[]
[viscosity_gas]
order = CONSTANT
family = MONOMIAL
[]
[temperature]
order = CONSTANT
family = MONOMIAL
[]
[e_gas]
order = CONSTANT
family = MONOMIAL
[]
[e_water]
order = CONSTANT
family = MONOMIAL
[]
[]
[AuxKernels]
[enthalpy_water]
type = PorousFlowPropertyAux
variable = enthalpy_water
property = enthalpy
phase = 0
execute_on = 'initial timestep_end'
[]
[enthalpy_gas]
type = PorousFlowPropertyAux
variable = enthalpy_gas
property = enthalpy
phase = 1
execute_on = 'initial timestep_end'
[]
[pressure_water]
type = PorousFlowPropertyAux
variable = pressure_water
property = pressure
phase = 0
execute_on = 'initial timestep_end'
[]
[pressure_gas]
type = PorousFlowPropertyAux
variable = pressure_gas
property = pressure
phase = 1
execute_on = 'initial timestep_end'
[]
[saturation_water]
type = PorousFlowPropertyAux
variable = saturation_water
property = saturation
phase = 0
execute_on = 'initial timestep_end'
[]
[saturation_gas]
type = PorousFlowPropertyAux
variable = saturation_gas
property = saturation
phase = 1
execute_on = 'initial timestep_end'
[]
[density_water]
type = PorousFlowPropertyAux
variable = density_water
property = density
phase = 0
execute_on = 'initial timestep_end'
[]
[density_gas]
type = PorousFlowPropertyAux
variable = density_gas
property = density
phase = 1
execute_on = 'initial timestep_end'
[]
[viscosity_water]
type = PorousFlowPropertyAux
variable = viscosity_water
property = viscosity
phase = 0
execute_on = 'initial timestep_end'
[]
[viscosity_gas]
type = PorousFlowPropertyAux
variable = viscosity_gas
property = viscosity
phase = 1
execute_on = 'initial timestep_end'
[]
[temperature]
type = PorousFlowPropertyAux
variable = temperature
property = temperature
execute_on = 'initial timestep_end'
[]
[e_water]
type = PorousFlowPropertyAux
variable = e_water
property = internal_energy
phase = 0
execute_on = 'initial timestep_end'
[]
[egas]
type = PorousFlowPropertyAux
variable = e_gas
property = internal_energy
phase = 1
execute_on = 'initial timestep_end'
[]
[]
[Kernels]
[mass]
type = PorousFlowMassTimeDerivative
variable = pliq
[]
[heat]
type = PorousFlowEnergyTimeDerivative
variable = h
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pliq h'
number_fluid_phases = 2
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureBC
pe = 1e5
lambda = 2
pc_max = 1e6
[]
[fs]
type = PorousFlowWaterVapor
water_fp = water
capillary_pressure = pc
[]
[]
[FluidProperties]
[water]
type = Water97FluidProperties
[]
[]
[Materials]
[watervapor]
type = PorousFlowFluidStateSingleComponent
porepressure = pliq
enthalpy = h
temperature_unit = Celsius
capillary_pressure = pc
fluid_state = fs
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-14 0 0 0 1e-14 0 0 0 1e-14'
[]
[relperm0]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[relperm1]
type = PorousFlowRelativePermeabilityCorey
n = 3
phase = 1
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.2
[]
[internal_energy]
type = PorousFlowMatrixInternalEnergy
density = 2650
specific_heat_capacity = 1000
[]
[]
[Executioner]
type = Transient
solve_type = NEWTON
end_time = 1e3
nl_abs_tol = 1e-12
[TimeStepper]
type = IterationAdaptiveDT
dt = 10
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Postprocessors]
[density_water]
type = ElementAverageValue
variable = density_water
execute_on = 'initial timestep_end'
[]
[density_gas]
type = ElementAverageValue
variable = density_gas
execute_on = 'initial timestep_end'
[]
[viscosity_water]
type = ElementAverageValue
variable = viscosity_water
execute_on = 'initial timestep_end'
[]
[viscosity_gas]
type = ElementAverageValue
variable = viscosity_gas
execute_on = 'initial timestep_end'
[]
[enthalpy_water]
type = ElementAverageValue
variable = enthalpy_water
execute_on = 'initial timestep_end'
[]
[enthalpy_gas]
type = ElementAverageValue
variable = enthalpy_gas
execute_on = 'initial timestep_end'
[]
[sg]
type = ElementAverageValue
variable = saturation_gas
execute_on = 'initial timestep_end'
[]
[sw]
type = ElementAverageValue
variable = saturation_water
execute_on = 'initial timestep_end'
[]
[pwater]
type = ElementAverageValue
variable = pressure_water
execute_on = 'initial timestep_end'
[]
[pgas]
type = ElementAverageValue
variable = pressure_gas
execute_on = 'initial timestep_end'
[]
[temperature]
type = ElementAverageValue
variable = temperature
execute_on = 'initial timestep_end'
[]
[enthalpy]
type = ElementAverageValue
variable = h
execute_on = 'initial timestep_end'
[]
[pliq]
type = ElementAverageValue
variable = pliq
execute_on = 'initial timestep_end'
[]
[liquid_mass]
type = PorousFlowFluidMass
phase = 0
execute_on = 'initial timestep_end'
[]
[vapor_mass]
type = PorousFlowFluidMass
phase = 1
execute_on = 'initial timestep_end'
[]
[liquid_heat]
type = PorousFlowHeatEnergy
phase = 0
execute_on = 'initial timestep_end'
[]
[vapor_heat]
type = PorousFlowHeatEnergy
phase = 1
execute_on = 'initial timestep_end'
[]
[e_water]
type = ElementAverageValue
variable = e_water
execute_on = 'initial timestep_end'
[]
[e_gas]
type = ElementAverageValue
variable = e_gas
execute_on = 'initial timestep_end'
[]
[]
[Outputs]
csv = true
perf_graph = false
[]
(modules/porous_flow/test/tests/pressure_pulse/pressure_pulse_1d_2phasePSVG2.i)
# Pressure pulse in 1D with 2 phases, 2components - transient
[Mesh]
type = GeneratedMesh
dim = 1
nx = 10
xmin = 0
xmax = 100
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[Variables]
[ppwater]
initial_condition = 2e6
[]
[sgas]
initial_condition = 0.3
[]
[]
[AuxVariables]
[massfrac_ph0_sp0]
initial_condition = 1
[]
[massfrac_ph1_sp0]
initial_condition = 0
[]
[ppgas]
family = MONOMIAL
order = FIRST
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = ppwater
[]
[flux0]
type = PorousFlowAdvectiveFlux
variable = ppwater
fluid_component = 0
[]
[mass1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = sgas
[]
[flux1]
type = PorousFlowAdvectiveFlux
variable = sgas
fluid_component = 1
[]
[]
[AuxKernels]
[ppgas]
type = PorousFlowPropertyAux
property = pressure
phase = 1
variable = ppgas
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'ppwater sgas'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1e-4
sat_lr = 0.3
pc_max = 1e9
log_extension = true
[]
[]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 2e9
density0 = 1000
thermal_expansion = 0
viscosity = 1e-3
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 2e7
density0 = 1
thermal_expansion = 0
viscosity = 1e-5
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePS
phase0_porepressure = ppwater
phase1_saturation = sgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph1_sp0'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-15 0 0 0 1e-15 0 0 0 1e-15'
[]
[relperm_water]
type = PorousFlowRelativePermeabilityCorey
n = 1
phase = 0
[]
[relperm_gas]
type = PorousFlowRelativePermeabilityCorey
n = 1
phase = 1
[]
[]
[BCs]
[leftwater]
type = DirichletBC
boundary = left
value = 3e6
variable = ppwater
[]
[rightwater]
type = DirichletBC
boundary = right
value = 2e6
variable = ppwater
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-20 10000'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1e3
end_time = 1e4
[]
[VectorPostprocessors]
[pp]
type = LineValueSampler
warn_discontinuous_face_values = false
sort_by = x
variable = 'ppwater ppgas'
start_point = '0 0 0'
end_point = '100 0 0'
num_points = 11
[]
[]
[Outputs]
file_base = pressure_pulse_1d_2phasePSVG2
print_linear_residuals = false
[csv]
type = CSV
execute_on = final
[]
[]
(modules/porous_flow/test/tests/infiltration_and_drainage/rsc01.i)
# RSC test with high-res time and spatial resolution
[Mesh]
type = GeneratedMesh
dim = 2
nx = 600
ny = 1
xmin = 0
xmax = 10 # x is the depth variable, called zeta in RSC
ymin = 0
ymax = 0.05
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[Functions]
[dts]
type = PiecewiseLinear
y = '3E-3 3E-2 0.05'
x = '0 1 5'
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pwater poil'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureRSC
oil_viscosity = 2E-3
scale_ratio = 2E3
shift = 10
[]
[]
[FluidProperties]
[water]
type = SimpleFluidProperties
bulk_modulus = 2e9
density0 = 10
thermal_expansion = 0
viscosity = 1e-3
[]
[oil]
type = SimpleFluidProperties
bulk_modulus = 2e9
density0 = 20
thermal_expansion = 0
viscosity = 2e-3
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePP
phase0_porepressure = pwater
phase1_porepressure = poil
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph1_sp0'
[]
[water]
type = PorousFlowSingleComponentFluid
fp = water
phase = 0
compute_enthalpy = false
compute_internal_energy = false
[]
[oil]
type = PorousFlowSingleComponentFluid
fp = oil
phase = 1
compute_enthalpy = false
compute_internal_energy = false
[]
[relperm_water]
type = PorousFlowRelativePermeabilityCorey
n = 1
phase = 0
[]
[relperm_oil]
type = PorousFlowRelativePermeabilityCorey
n = 1
phase = 1
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.25
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-5 0 0 0 1E-5 0 0 0 1E-5'
[]
[]
[Variables]
[pwater]
[]
[poil]
[]
[]
[ICs]
[water_init]
type = ConstantIC
variable = pwater
value = 0
[]
[oil_init]
type = ConstantIC
variable = poil
value = 15
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pwater
[]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = pwater
[]
[mass1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = poil
[]
[flux1]
type = PorousFlowAdvectiveFlux
fluid_component = 1
variable = poil
[]
[]
[AuxVariables]
[SWater]
family = MONOMIAL
order = CONSTANT
[]
[SOil]
family = MONOMIAL
order = CONSTANT
[]
[massfrac_ph0_sp0]
initial_condition = 1
[]
[massfrac_ph1_sp0]
initial_condition = 0
[]
[]
[AuxKernels]
[SWater]
type = MaterialStdVectorAux
property = PorousFlow_saturation_qp
index = 0
variable = SWater
[]
[SOil]
type = MaterialStdVectorAux
property = PorousFlow_saturation_qp
index = 1
variable = SOil
[]
[]
[BCs]
# we are pumping water into a system that has virtually incompressible fluids, hence the pressures rise enormously. this adversely affects convergence because of almost-overflows and precision-loss problems. The fixed things help keep pressures low and so prevent these awful behaviours. the movement of the saturation front is the same regardless of the fixed things.
active = 'recharge fixedoil fixedwater'
[recharge]
type = PorousFlowSink
variable = pwater
boundary = 'left'
flux_function = -1.0
[]
[fixedwater]
type = DirichletBC
variable = pwater
boundary = 'right'
value = 0
[]
[fixedoil]
type = DirichletBC
variable = poil
boundary = 'right'
value = 15
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
petsc_options = '-snes_converged_reason -ksp_diagonal_scale -ksp_diagonal_scale_fix -ksp_gmres_modifiedgramschmidt -snes_linesearch_monitor'
petsc_options_iname = '-ksp_type -pc_type -sub_pc_type -sub_pc_factor_shift_type -pc_asm_overlap -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'gmres asm lu NONZERO 2 1E-10 1E-10 10000'
[]
[]
[VectorPostprocessors]
[swater]
type = LineValueSampler
warn_discontinuous_face_values = false
variable = SWater
start_point = '0 0 0'
end_point = '7 0 0'
sort_by = x
num_points = 21
execute_on = timestep_end
[]
[]
[Executioner]
type = Transient
solve_type = Newton
petsc_options = '-snes_converged_reason'
end_time = 5
[TimeStepper]
type = FunctionDT
function = dts
[]
[]
[Outputs]
file_base = rsc01
[along_line]
type = CSV
execute_vector_postprocessors_on = final
[]
[exodus]
type = Exodus
execute_on = 'initial final'
[]
[]