PorousFlowFullySaturatedDarcyFlow

Darcy flux suitable for models involving a fully-saturated single phase, multi-component fluid. No upwinding is used

Describes the differential term The nomenclature is described here. This is fully-saturated, multi-component, single-phase Darcy flow for fluid component .

commentnote

Although the multiplication by is optional, you should almost always set multiply_by_density=true

commentnote

No upwinding is performed, which means many nodal Material properties are not needed and numerical diffusion is reduced. However, the numerics are less well controlled: the whole point of full upwinding is to prevent over-shoots and under-shoots in the mass fraction, etc. Other Kernels implement Kuzmin-Turek TVD stabilization.

Input Parameters

  • PorousFlowDictatorThe UserObject that holds the list of PorousFlow variable names

    C++ Type:UserObjectName

    Controllable:No

    Description:The UserObject that holds the list of PorousFlow variable names

  • gravityGravitational acceleration vector downwards (m/s^2)

    C++ Type:libMesh::VectorValue<double>

    Controllable:No

    Description:Gravitational acceleration vector downwards (m/s^2)

  • variableThe name of the variable that this residual object operates on

    C++ Type:NonlinearVariableName

    Controllable:No

    Description:The name of the variable that this residual object operates on

Required Parameters

  • blockThe list of blocks (ids or names) that this object will be applied

    C++ Type:std::vector<SubdomainName>

    Controllable:No

    Description:The list of blocks (ids or names) that this object will be applied

  • displacementsThe displacements

    C++ Type:std::vector<VariableName>

    Controllable:No

    Description:The displacements

  • fluid_component0The index corresponding to the fluid component for this kernel

    Default:0

    C++ Type:unsigned int

    Controllable:No

    Description:The index corresponding to the fluid component for this kernel

  • multiply_by_densityTrueIf true, then this Kernel is the fluid mass flux. If false, then this Kernel is the fluid volume flux (which is common in poro-mechanics)

    Default:True

    C++ Type:bool

    Controllable:No

    Description:If true, then this Kernel is the fluid mass flux. If false, then this Kernel is the fluid volume flux (which is common in poro-mechanics)

  • prop_getter_suffixAn optional suffix parameter that can be appended to any attempt to retrieve/get material properties. The suffix will be prepended with a '_' character.

    C++ Type:MaterialPropertyName

    Controllable:No

    Description:An optional suffix parameter that can be appended to any attempt to retrieve/get material properties. The suffix will be prepended with a '_' character.

  • use_interpolated_stateFalseFor the old and older state use projected material properties interpolated at the quadrature points. To set up projection use the ProjectedStatefulMaterialStorageAction.

    Default:False

    C++ Type:bool

    Controllable:No

    Description:For the old and older state use projected material properties interpolated at the quadrature points. To set up projection use the ProjectedStatefulMaterialStorageAction.

Optional Parameters

  • absolute_value_vector_tagsThe tags for the vectors this residual object should fill with the absolute value of the residual contribution

    C++ Type:std::vector<TagName>

    Controllable:No

    Description:The tags for the vectors this residual object should fill with the absolute value of the residual contribution

  • extra_matrix_tagsThe extra tags for the matrices this Kernel should fill

    C++ Type:std::vector<TagName>

    Controllable:No

    Description:The extra tags for the matrices this Kernel should fill

  • extra_vector_tagsThe extra tags for the vectors this Kernel should fill

    C++ Type:std::vector<TagName>

    Controllable:No

    Description:The extra tags for the vectors this Kernel should fill

  • matrix_tagssystemThe tag for the matrices this Kernel should fill

    Default:system

    C++ Type:MultiMooseEnum

    Options:nontime, system

    Controllable:No

    Description:The tag for the matrices this Kernel should fill

  • vector_tagsnontimeThe tag for the vectors this Kernel should fill

    Default:nontime

    C++ Type:MultiMooseEnum

    Options:nontime, time

    Controllable:No

    Description:The tag for the vectors this Kernel should fill

Tagging Parameters

  • control_tagsAdds user-defined labels for accessing object parameters via control logic.

    C++ Type:std::vector<std::string>

    Controllable:No

    Description:Adds user-defined labels for accessing object parameters via control logic.

  • diag_save_inThe name of auxiliary variables to save this Kernel's diagonal Jacobian contributions to. Everything about that variable must match everything about this variable (the type, what blocks it's on, etc.)

    C++ Type:std::vector<AuxVariableName>

    Controllable:No

    Description:The name of auxiliary variables to save this Kernel's diagonal Jacobian contributions to. Everything about that variable must match everything about this variable (the type, what blocks it's on, etc.)

  • enableTrueSet the enabled status of the MooseObject.

    Default:True

    C++ Type:bool

    Controllable:Yes

    Description:Set the enabled status of the MooseObject.

  • implicitTrueDetermines whether this object is calculated using an implicit or explicit form

    Default:True

    C++ Type:bool

    Controllable:No

    Description:Determines whether this object is calculated using an implicit or explicit form

  • save_inThe name of auxiliary variables to save this Kernel's residual contributions to. Everything about that variable must match everything about this variable (the type, what blocks it's on, etc.)

    C++ Type:std::vector<AuxVariableName>

    Controllable:No

    Description:The name of auxiliary variables to save this Kernel's residual contributions to. Everything about that variable must match everything about this variable (the type, what blocks it's on, etc.)

  • seed0The seed for the master random number generator

    Default:0

    C++ Type:unsigned int

    Controllable:No

    Description:The seed for the master random number generator

  • use_displaced_meshFalseWhether or not this object should use the displaced mesh for computation. Note that in the case this is true but no displacements are provided in the Mesh block the undisplaced mesh will still be used.

    Default:False

    C++ Type:bool

    Controllable:No

    Description:Whether or not this object should use the displaced mesh for computation. Note that in the case this is true but no displacements are provided in the Mesh block the undisplaced mesh will still be used.

Advanced Parameters

Input Files

References

No citations exist within this document.