SpecifiedSmoothSuperellipsoidIC

buildconstruction:Undocumented Class

The SpecifiedSmoothSuperellipsoidIC has not been documented. The content listed below should be used as a starting point for documenting the class, which includes the typical automatic documentation associated with a MooseObject; however, what is contained is ultimately determined by what is necessary to make the documentation clear for users.

Multiple smooth superellipsoids with manually specified center points; semiaxes a,b,c; and exponents n

Overview

Example Input File Syntax

Input Parameters

  • asSemiaxis a for each superellipsoid

    C++ Type:std::vector<double>

    Controllable:No

    Description:Semiaxis a for each superellipsoid

  • bsSemiaxis b for each superellipsoid

    C++ Type:std::vector<double>

    Controllable:No

    Description:Semiaxis b for each superellipsoid

  • csSemiaxis c for each superellipsoid

    C++ Type:std::vector<double>

    Controllable:No

    Description:Semiaxis c for each superellipsoid

  • invalueThe variable value inside the superellipsoid

    C++ Type:double

    Controllable:No

    Description:The variable value inside the superellipsoid

  • nsExponent n for each superellipsoid

    C++ Type:std::vector<double>

    Controllable:No

    Description:Exponent n for each superellipsoid

  • outvalueThe variable value outside the superellipsoid

    C++ Type:double

    Controllable:No

    Description:The variable value outside the superellipsoid

  • variableThe variable this initial condition is supposed to provide values for.

    C++ Type:VariableName

    Controllable:No

    Description:The variable this initial condition is supposed to provide values for.

  • x_positionsThe x-coordinate for each superellipsoid center

    C++ Type:std::vector<double>

    Controllable:No

    Description:The x-coordinate for each superellipsoid center

  • y_positionsThe y-coordinate for each superellipsoid center

    C++ Type:std::vector<double>

    Controllable:No

    Description:The y-coordinate for each superellipsoid center

  • z_positionsThe z-coordinate for each superellipsoid center

    C++ Type:std::vector<double>

    Controllable:No

    Description:The z-coordinate for each superellipsoid center

Required Parameters

  • blockThe list of blocks (ids or names) that this object will be applied

    C++ Type:std::vector<SubdomainName>

    Controllable:No

    Description:The list of blocks (ids or names) that this object will be applied

  • boundaryThe list of boundaries (ids or names) from the mesh where this object applies

    C++ Type:std::vector<BoundaryName>

    Controllable:No

    Description:The list of boundaries (ids or names) from the mesh where this object applies

  • int_width0The interfacial width of the void surface. Defaults to sharp interface

    Default:0

    C++ Type:double

    Controllable:No

    Description:The interfacial width of the void surface. Defaults to sharp interface

  • nestedvalueThe variable value for nested particles inside the superellipsoid in inverse configuration

    C++ Type:double

    Controllable:No

    Description:The variable value for nested particles inside the superellipsoid in inverse configuration

  • prop_getter_suffixAn optional suffix parameter that can be appended to any attempt to retrieve/get material properties. The suffix will be prepended with a '_' character.

    C++ Type:MaterialPropertyName

    Controllable:No

    Description:An optional suffix parameter that can be appended to any attempt to retrieve/get material properties. The suffix will be prepended with a '_' character.

  • rand_seed12345Seed value for the random number generator

    Default:12345

    C++ Type:unsigned int

    Controllable:No

    Description:Seed value for the random number generator

  • use_interpolated_stateFalseFor the old and older state use projected material properties interpolated at the quadrature points. To set up projection use the ProjectedStatefulMaterialStorageAction.

    Default:False

    C++ Type:bool

    Controllable:No

    Description:For the old and older state use projected material properties interpolated at the quadrature points. To set up projection use the ProjectedStatefulMaterialStorageAction.

  • zero_gradientFalseSet the gradient DOFs to zero. This can avoid numerical problems with higher order shape functions.

    Default:False

    C++ Type:bool

    Controllable:No

    Description:Set the gradient DOFs to zero. This can avoid numerical problems with higher order shape functions.

Optional Parameters

  • control_tagsAdds user-defined labels for accessing object parameters via control logic.

    C++ Type:std::vector<std::string>

    Controllable:No

    Description:Adds user-defined labels for accessing object parameters via control logic.

  • enableTrueSet the enabled status of the MooseObject.

    Default:True

    C++ Type:bool

    Controllable:No

    Description:Set the enabled status of the MooseObject.

  • ignore_uo_dependencyFalseWhen set to true, a UserObject retrieved by this IC will not be executed before the this IC

    Default:False

    C++ Type:bool

    Controllable:No

    Description:When set to true, a UserObject retrieved by this IC will not be executed before the this IC

Advanced Parameters

Input Files

Child Objects